Solaris 10 software 5 disc ?

i've succeeded in installing solaris 10.
i am now stuck in a loop.
when starting up, the solaris install always starts and want the software 5 disk to continue.
i've put in every disk i have, but nothing seems to satisfy the installer so it can continue.
i received 3 disks from sun in the mail,
a sparc install, a x86 (which i used as i have a x86 machine) install and a developer install disc.
none of these will install, and i can do nothing but reboot and try again.
whats this software 5 disc it want?
if i choose to skip it, it gives me a reboot option, but never actually reboots unless i hit the on off switch on my machine.
can anyone give me some help?
thanks!
Harold

I've had a very similar error this evening, but on 10/08.
I selected the OEM full (everything) option and the reboot button fails after CD5. Likewise, performed a halt. It rebooted from the disk image to install menus and asked me to insert CD2. Then it gave me a blank list of what it wanted to add, so I pressed back and custom install and found it wanted to install en_gb locale (previously selected by me). It then asked for CD3 and did the same ... and then CD4 and did the same ... and then the same on CD5. This time the reboot button did work ... and it's now installed ok.
If you've hit this bug it's worth going round again to CD5 ... just in case it does the same as above and works second time. Hope this of help to others finding this error.
- Edd -

Similar Messages

  • How do I go about getting the product serial number to register my product as well as install my product.  I bought it with a product box.  On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

    How do I go about getting the product serial number to register my product as well as install my product.  I bought it with a product box.  On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid.  When I tried to type this in for registration, it does register as this numbers also contain letters in it.  Apparently the registration boxes accept numbers only.  What do I do with a useless product for which I have paid good money for it?????

    This is the simple solution which was offered to me when I tried to get the serial code on line.
    The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
    I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
    This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
    I is really frustrating, spending the last two hours trying to get my product going....

  • Mac Pro DVD drive won't load some software discs

    I just bought two sets of Photoshop Elements, and my 2007 Mac Pro failed to recognize all six DVDs. I'm realizing I've had this problem with a few software discs in recent years, including some Final Cut Studio install discs. CDs and regular DVDs work fine - just some software DVDs are eventually ejected by the computer without showing up on the desktop. I have tried cleaning the drive with a disc cleaner.
    My way around it has been to put these discs in my PC, make a copy, and then these copies load fine in my Mac. But it's a nuisance, and my PC won't be around forever.
    Can anyone suggest what the problem might be? Or a decent external drive (Blu-ray?) that I might want to replace it with?
    Thanks.

    I'll try that tomorrow. Thinking it could also be:
    1)  The PRAMM battery. found info on that they can wear out close to 5 years. This MAC PRO is close to that now.  And I use a lot of power on it.
    2) MAC PRO is plugged into a  SURGE PROTECTOR, instead of right into the wall outlet.
    3) Been doing a lot of FORCE QUITS and HARD BOOT -- unplugging it directly when it wouldn't shut down soon enough --  lately this past year.
    I just assumed that this MAC PRO with the XEON QUAD CORE etc., was a heavy duty enough NLE,
    that i wouldn't have these problems. It's not fully loaded with all the chips it can carry...and I don't have near enough external terabyte hard drives for storing video and audio files to edit. I've been storing wayyy too much
    on the internal hard dives and just have to stop that.
    I noticed these past few days that much of the LETTERING for hard drive icons and folders' titles
    were starting to look in OVERLAPPING of the lettering. That was my first hint that  something was up.

  • No software discs with new Macbook

    I did not receive any software discs with my new MacBook. I understand I should have had 2 discs. How can I remedy this?

    Welcome to the discussions!
    Apple provides restore disks with all Macs - new and refurbished. I bought a refurb and my packaging was different from yours, but I understand that they are hidden in the packaging. Double-check in the packing materials so be sure that the disks are not hidden in there.
    If for some reason they were left out, by all means call Apple and they will take care of it.

  • Qosmio G20 - Missing software discs

    I have a Qosmio G20 that has had the hard drives wiped due to a virus.
    To reinstall software a disc is required that I seem to have misplaced. Apparently Toshiba no longer keeps a copy of this disc as it is an old model. I was wondering if anyone could help me out with this problem? I think it is a software recoverd dvd-rom as according to the user manual this is the only software disc that came with the computer.
    Thanks

    Hi
    Do you mean a software disk where you can find additional software or the disk with the OS?
    Normally for this older notebook you can get a recovery disk from an authorized service provider. It takes only few minutes to ask for this.
    Furthermore on the Toshiba website you can search for the nearest authorized service provider.

  • Colour Pearl w/o Software Disc

    *I'm trying to get colour pearl for my 8100 because my trackball appears to be a little discolored & its really ugly.
    *I DO NOT have the software disc for my BB.
    *Can someone help me out by telling me what software I need to download of the BB website.
    *I don't have any apps downloaded (I don't even have the desktop manager b/c I didn't know which one to choose).
    Thanks,
    CandieM

    Here's an OTA link to Blingball (you need to be running OS 4.5 for it to work it looks like. I've copied the warning from the post as well:
    BlingBall 0.9b2.
    WARNING: This is for the BlackBerry Pearl 8100 with 4.5 OS only. This application is only supported on 4.5 OS. Some have reported that it does, in fact, work in OS 4.2, though. This application will do nothing for you if you have an 8110, 8120, or 8130 as those devices do not have the polychromatic trackball.
    NOTICE: This application is beta and has only been tested on a very small number of devices.
    LINK: http://www.troybrownpc.com/blingball.jad
    EDIT: in order to change the Trackball color or set it to "Disco" which flashes all the colors in Sequence go to Options->BlingBall Options and you'll be able to set it from there. There is a custom color option but I didn't play with that yet.
    Message Edited by teddana on 05-13-2009 03:45 PM
    Of all the things I've lost, I miss my mind the most!

  • HT203176 when i insert a software disc into my mac it will not run, how do i get it to run? thanks

    Please help - when I insert a software disc into my mac it will not run, how do I get it to.
    Thanks

    Then as Kenichi Watanabe has already advised...
    The software disc should appear on the Desktop (or in the sidebar of a Finder window). 
    Double-click the disc icon (or select it in the sidebar). 
    On the disc, there should is often an Installer, or the application itself.

  • XP software disc does not work on 8.1 HP PSC 2355v All in One Printer

    Please excuse my novice actions in the subject description as I put my problem and request there. Basically: My XP software Disc will not work on my Windows 8.1 computer for my HP PSC 2355v All In One Printer.  Needless to say I can print with a downloaded driver but can not use the Managerial software on the XP disc.   When I try to work from the printer it does not recognize the computer, so  is there HP software out there that can be downloaded simply to my computer? If  so, Where and How can I get it. Thanks again.

    Hi,
    Unfortunately no more support after Vista but you can use basic function of the printer using the following instructions:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N135752
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • IMac ejects CDs & Software Discs, only reads DVDs

    Hello. I am not very good at working with computers, so sorry if I forget to add things. I was given a used one of these:
    Model Name: iMac
    Model Identifier: iMac8,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.66 GHz
    It automatically ejects CDs, software discs, etc. The only type of disk it reads are DVDs, and at times, it still ejects them. How can I repair this? I do not have applecare since this is a second hand computer. Would it be very expensive to replace the optical drive? Do I need a new one? Can I run an external dvd/cd drive to just avoid this? Is the drive just dirty?
    Please help.

    Thanks to a very helpful Apple Genius Bar expert, I have just saved over £100. After reading this forum I tried everything suggested to get my superdrive to accept my DVDs and to get my iDVD to produce a slideshow. After two weeks of frustration I took the whole iMac to the shopping mall. The genius reached into the counter draw and held a can of compressed air.After a minute of squirting the air into the dvd slot all my prayers had been answered. He told me that cleaning the drive like this work on about a third of all his clients. I have now bought a can of compressed air from Amazon for £4 and have it ready for the next problem the arises. (I have tried the same technique on the unruly kids, but it does not seem to work on them!)

  • No software disc for my airport express -how to configue on pc

    My airport express which i bought some months back didnt come with a software disc and as im configuring it with my router with a pc i think i need to download the relevant software. Any suggestions?

    http://support.apple.com/kb/DL1391

  • Need original software disc

    So I have the 30GB ipod, white, 5th generation. It came with a disc to download the software to my desktop. I now would like to use my ipod on a different laptop but no longer have that original disc. I have downloaded the newest version of itunes but when I plug in my ipod, itunes doesn't detect it. I've gone to the device manager on windows and it shows the ipod there with an exclamation point. I follow the prompts to correct problem and it tells me that the necessary software isn't found and to enter the original disc. As I said before I no longer have the disc (lost it or got thrown away). Is there any way to get a new disc or can I download this software from somewhere? I can't update any software thru itunes because it isn't even recognizing my ipod in the first place. Any help would be greatly appreciated.

    >I need a recovery disc or the original software disc for XP but none of this was supplied with it.
    I'm in doubt about it. According notebook specification Satellite M50-161 is delivered with follow medias:
    - Recovery Medias (CD-ROM or DVD)
    - Express Media Player
    - Additional Software CD
    - Microsoft Works Suite
    All old notebook models are delivered with recovery CDs. I have old Satellite m70 and still have original Toshiba recovery installations DVD.
    Anyway, you can try to contact nearest Toshiba authorized service provider and ask for help. To be honest I don't believe you will get it for this old notebook model. For OS installation you can also use Microsoft installations CD. All drivers, tools and utilities you can download from Toshiba support page under http://eu.computers.toshiba-europe.com

  • Possible to create system software disc on USB flash drive to start Apple Hardware Test on mid 2009 iMac running OS X 10.9

    Is it possible to create a system software disc on a USB flash drive to start Apple Hardware Test on mid 2009 iMac running OS X 10.9?

    Hopefully, those dvd's are the correct ones. If not, it's possible to download the AHT for many models from Apple, & either make a bootable drive, or replace the files in the hidden /System/Library/CoreServices/.diagnostics folder.
    see  Download and run Apple Hardware Test (AHT) from a USB drive.
    There are additional download details in the comments  for some later models.

  • Ordered refurbished MBP - no software discs included

    Hello,
    I just ordered a refurbished MBP from Apple.com and it came with no software discs, which I have always gotten when I purchased Apple products in the past. I contacted Apple Support and they said they no longer ship system restore discs anymore, which seemed strange to me.
    I am wondering if I should pursue this issue further, and if I cannot get any software discs, what are my options in case I need to do a restore, etc.?
    Thanks!

    Nuckss wrote:
    OK. What do you do if you are adding an aftermarket harddrive (replacing 500mb stock drive with 1TB drive)? Don't tell me I have to put the 500MB one in an external enclosure and boot from that and somehow install Lion on the 1TB drive and then upgrade it to Mountain Lion using my upgrade password and content code?
    http://support.apple.com/kb/HT4718
    OS X Internet Recovery
    If you happen to encounter a situation in which you cannot start from the Recovery System, such as your hard drive stopped responding or you installed a new hard drive without OS X installed, new Mac models introduced after public availability of OS X Lion or OS X Mountain Lion, automatically use the OS X Internet Recovery feature if the Recovery System (Command-R method above) doesn't work. OS X Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
    OS X Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, OS X Internet Recovery will download and start from a Recovery System image. From there, you are offered all the same utilities and functions described above.

  • My Casio Exilil EX-FC100 has a software disc for windows vista & xp

    help
    My Casio Exilil EX-FC100 has a software disc for windows vista & xp. Can I download to windows 8?

    Hello LEOice,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are looking for software for your camera, and I would be happy to guide you towards a resolution!
    To find specific drivers for your camera, I recommend contacting Casio Support by clicking on this link.
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Vista, dvd/cd will read and burn but will not recognize software disc to load programs

    HP M8120N running vista home premium, I can burn cd/DVD's, I can view and open pictures and data files files from dvd/cd but I can't install software programs from the drive. Even tried just opening up the drive to view the disc and get please insert disc message, Please, can anyone help?

    Keith, just for grins, go to your Apple and click it and then choose System Preferences, and when it opens choose CD-DVD and see what option you have checked for the different media.
    Just a chance when you did an update it might have changed a default setting you had.
    Don

  • IPhoto wont install from mac mini original software discs

    1.25Ghz G4 mini, 512MB RAM
    Install discs are original mini disks ver. 10.3.7
    w/ Xcode installed
    upgraded via System update to 10.3.9
    as installed by apple everything worked ok, but due to some system issues I had to reformat drive, and reinstall. iPhoto seems to have installed (at least there's an icon for it, and a window opens when icon is double clicked), but it will immediately quit when launched with an error that it is missing files it needs, and to reinstall from the iLife discs.
    There was not a separate iLife disc included with the mini just the install DVD, and the OS 9 disc. The error doesn't say what files are missing, but a quick visit to the Console shows the following;
    "iPhoto[384] Can't find ImageIO!"
    I have tried reinstalling several times since, installing iPhoto only, all bundled software, and full reformat/reinstall, all with the same results. It seems that the install disc I got was faulty, and won't properly install the bundled software.
    Is there any way to get just the missing ImageIO? From this website, or just some helpful poster?
    mini Mac OS X (10.3.9)

    garroth,
    All I can tell you is take a look at this link to make sure you followed the correct steps.
    http://docs.info.apple.com/article.html?artnum=300396
    Lori

Maybe you are looking for