Solaris 10 sparc install erorr

Hello,
I try to install solaris 10 on my ultra5. When i type boot cdrom at the okj prompt i get this :
ok
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Assertion failed: digit>=0 && digit<64, file src/util.c, line 854
/lib/svc/bin/svc.configd:abort_handler+0x24
/lib/libc.so.1:0xbc52c
/lib/libc.so.1:0xb1998
/lib/libc.so.1:__lwp_kill+0x8 [ Signal 6 (ABRT)]
/lib/libc.so.1:abort+0xd0
/lib/libc.so.1:_assert+0x64
/lib/svc/bin/svc.configd:0x4323c
/lib/svc/bin/svc.configd:0x47080
/lib/svc/bin/svc.configd:sqlite_step+0x6c
/lib/svc/bin/svc.configd:sqlite_exec+0x110
/lib/svc/bin/svc.configd:0x5558
/lib/svc/bin/svc.configd:backend_init+0x70
/lib/svc/bin/svc.configd:main+0x418
/lib/svc/bin/svc.configd:_start+0x108
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
svc.configd exited with status 255 (unknown error)
Any clue ?

Oh, I noticed this is a net install.
Take a look at this:
http://sunsolve.sun.com/search/document.do?assetkey=1-1-5006397-1&searchclause=call%20to%20undefined%20service%20%22alloc_virt%22
Kinda a crap answer but give it a try - and still contact Sun Support to see what they say.

Similar Messages

  • Solaris 8 SPARC Install- No mouse

    Greetings all,
    I recently acquired and heavily upgraded a Sparc 5 (170MHz Fujitsu TurboSparc) that I intend to run headlessly in a server closet, primarily on an experimental basis (the rest of our network is BSD/Linux/NT) to gain familiarity with true AT&T-spec UNIX on SPARC hardware with our limited budget (we are high-school students, after all). Although I have run Solaris 8 on x86 hardware (horrid, slow, unstable), the installation on SPARC has been fraught with annoyances such as bad magic number disklabel errors (remedied by creating a junk label under OpenBSD) and now, the lack of an accessible MouseKeys feature (I am installing on the console with a beat-up $2 Sun keyboard). I looked at some sun mice at a computer warehouse but they were trashed and I don't want useless junk in my closet (already have enough of it- pa-risc workstations and linksys POS routers, anyone?). Anyway, what I want to do is just get a quick-and-dirty install done with no mouse so that I can run w\the machine headlessly and export the window manager to a Linux workstation or NT pc with Exceed, and occasionally use a serial console on tty a to do low-level administrative tasks.
    Thanks guys and girls, and sorry about the overlong post.
    -Anna
    System in question is:
    170MHz SparcStation 5
    128M Ram
    cgsix framebuffer
    24x panasonic SCSI cdrom
    2x4.5g IBM SCA SCSI HDDs (why the #%^&# did they use SCA?!)
    Slimline floppy
    Weird wide SCSI+10/100 hme NIC sbus card
    ScriptKiddiez Tabulating Devices Club (SKTDC)
    "Your net will be pwned by us"

    Hi,
    I am now trying to install Solaris to my other machine... and hoping it will work. This is a K6-2 PC with 192MB RAM and 2 x 8GB harddisks.
    The first disk is occupied by Trustix and Slackware (Both are Linux), and I have the entire second dirve for Solaris. Then when I boot from DCA, my machine will keep rebooting itself. IF I boot from CD, it will say cannot find drive for installing Solaris. I have used LBA/CHS/Normal mode for my harddisk - none of them work. Any idea?
    Please help.
    Thanks.
    Jason

  • How can I install new versions of Fifefox on Solaris 9 Sparc?

    I use Firefox 2.0.0.20 on Solaris 9 Sparc, but I couldn't install any verions of Firefox major version 3.
    There is a great site, http://www.sunfreeware.com/mozilla.html, that looks it has a possibles version compatibles whit my OS, but the links don`t work.
    Any suggestions?
    More detail about my OS:
    Solaris 9 9/05 HW s9s_u9wos_06b SPARC
    Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
    se is subject to license terms.
    Assembled 25 September 2006

    Hi,
    Please also see [http://unixpackages.com/packages/mozilla this] (from http://www.sunfreeware.com/). It looks like 2.0.0.23 is the last supported version for Solaris 9.

  • Install newest JRE on Solaris 9 Sparc (64-bit)

    Note: This message has also been posted on the JRE forum. This is the second attempt to post it here.
    I would like to know the best method to replace the JRE that is installed with a Solaris 9 (SPARC) installation. A clean installation of Solaris 9 comes with JRE 1.4 and I would prefer 1.4.1 (64-bit) or newer. Sun provides self-extracting archive downloads of the latest JREs for Solaris, but I have been unsuccessful in using these. I followed the instructions at:
    http://java.sun.com/j2se/1.4.2/install-solaris.html
    for doing a self-extracting installation, but this does not replace the contents of /usr/j2se with the new JRE. Additionally a pkginfo still points to the old JRE. I also read the instructions at:
    http://java.sun.com/j2se/1.4.2/install-solaris-64.html
    which stated I should install the 32-bit version, and then the 64-bit version. Finally, both set of instructions mention installation from packages, yet I am unable to find the packages to download. What is the best method to remove the JRE from a Solaris installation and install a newer version of the JRE so the pkginfo is updated and the new JRE resides in /usr/j2se? Any assistance is appreciated.

    I found by issue "mount -v" that our disk slices are
    UFS type. So we don't need apply patch 5257399,
    right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
    Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
    Your safest bet would be to escalate the request wityh Oracle Support.

  • Problems to install Oracle SOA Suite 11g on Solaris 10 SPARC-64

    I'm trying to install the Oracle SOA Suite 11g on Solaris 10 SPARC-64 but I´m having problems.
    I have already installed the JDK 1.6_11 for 64 bits and I use it for the SOA installation, the instruction is:
    ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
    I'm providing the absolute path to ensure take the correct JDK (JDK 64 bits).
    But I get the following error:
    bash-3.00$ ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
    Starting Oracle Universal Installer...
    Checking if CPU speed is above 300 MHz. Actual 1500 MHz Passed
    Checking Temp space: must be greater than 150 MB. Actual 5291 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 39311 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-26_03-17-44PM. Please wait ...bash-3.00$ Log: /home/oracle/oraInventory/logs/install2010-01-26_03-17-44PM.log
    [ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
    [EXCEPTION]:java.lang.reflect.InvocationTargetException
    I reviewed the log install2010-01-26_03-17-44PM.out and displays the following:
    Adding /tmp/OraInstall2010-01-26_03-17-44PM for deletion.
    Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/soawl.jar
    Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/template.jar
    [email protected]creenRes
    java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: ld.so.1: java: fatal: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
         at java.lang.Runtime.load0(Runtime.java:770)
         at java.lang.System.load(System.java:1005)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
         at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
         at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
         at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
         at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
         at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
         at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
         at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
         at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
         at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
    Caused by: java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
         at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         at java.lang.System.loadLibrary(System.java:1030)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
         at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
         at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
         at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
         at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
         at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
         ... 8 more
    [ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
    [EXCEPTION]:java.lang.reflect.InvocationTargetException
    I think that the error would be caused by the JDK version with which try to initializing.
    Anyone have any idea about the possible error? Thanks in advance.

    Hi, I encourage you to try to use the generic installer at: %SOA_INSTALLER_DIR%/Disk1/runInstaller. Because if you are using the runInstaller at %SOA_INSTALLER_DIR%/Disk1/install/solaris it will lead to that problem in some cases.

  • Install Solaris 10 Sparc on Ultra 40

    I am trying to install solaris 10 Sparc on an Sun Ultra 40 i386 pc. Is that able to be done. I have libraries that only work on sparc machines. Thanks for any help.

    SPARC and i386 are different CPUs. They are not compatible.
    You run SPARC installations on SPARC hardware, you run x86 installations on x86 hardware.
    Darren

  • How to install a single 2Gb FC adapter with Solaris 10 SPARC ?.

    Hi All,
    I have the Sun Box runing Solaris 10 SPARC, i tried to install PCI single 2Gb FC adapter on this Server in order to connect to Sun Storage FC. At Ok prompt, i tried to run show-devs and looked the path /pci@1e,600000/SUNW,qlc@2 and supposed that physical installation for this adapter is ok.
    But i don't know whether Solaris 10 SPARC included the required drivers for this adapter already or not. Pls show me how to get correct drivers for this adapter and how to test to look if it's working properly under Solaris 10 SPARC ?.
    Thanks
    Scott

    Yes, it's part#X6767A supported for entry SPARC Sun Fire server Line.
    I tried to seach drivers via qlogic.com and it leads me to the sunsolve.com for the download but the download is required to login with a service plan from Sun. So sun wanted to charge for these patches/drivers.
    Do you know which site/link is free for Sun drivers in gerneral ?.
    Thanks
    Scott

  • Installing RealTek ethernet card in solaris 7 sparc machine

    I inserted RealTek ethernet card in my Solaris-7 Sparc machine. But to work it properly ,need to install driver for the card. I searched a lot but i did't get the driver to download . I have read from some sites that the driver for solaris 7 sparc is not avaliable.How can i solve this problem.?
    Anybody please help me to solve the problem.

    You can try a NIC driver from RealTek, directly.
    http://www.realtek.com.tw/downloads/
    ... but for a SPARC system? That may be problematic.
    Does OBP see the device? Use show-devs at the OK prompt.
    If it isn't seen at OBP's elementary hardware level, the OS will never use it.
    If it is recognized at OBP, then try the manufacturer's drivers.
    Return to the forum and let the rest of us know what happens..

  • Installing Database 11.2.0.1.0  on Solaris 9 SPARC machine.

    Hi,
    I am installing db using ade copydb and than running startme , I am getting this error continously.
    ld.so.1: /ade_autofs/nfsdo_release_unix/RDBMS/11.2.0.1.0/SOLARIS.SPARC64/RELEASE/sqlplus/bin/sqlplus: fatal: libm.so.2: open failed: No such file or directory Killed
    Please help me to get the DB 11.2.0.1 installed on Solaris 9 SPARC.
    Thanks,
    Edited by: 906748 on 09-Jan-2012 04:21

    Hi;
    You can use below version for 11gR2 which is already by Srini
    The following operating system versions (or later) are required for Oracle Database 11g Release 2 (11.2):
    Oracle Solaris 10 U6 (5.10-2008.10)
    Starting with Oracle Database 11g Release 2 (11.2.0.3), Oracle Database is also supported on the following operating system versions (or later):
    Oracle Solaris 11 11/11 SPARC
    Oracle Solaris 11 11/11 X86
    See also:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Regard
    Helios

  • Install package for Firefox 30.0 on Sun Solaris 10 SPARC?

    Looking for the latest Sun Solaris 10 SPARC package for Firefox 30. It appears it either has not been posted yet or development of Firefox on Sun Solaris has halted.
    http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest/contrib/
    http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest/contrib-localized/
    http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/contrib/
    http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/contrib-localized/
    Package name should be similar to "firefox-30.0.en-US.solaris-10-fcs-sparc-pkg.bz2".
    Thank you!

    Mozilla does not tar packages for all linux platforms, but some third party repositories do. I did find: [http://unixpackages.com/packages/mozilla]
    [http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/linux-i686/en-US/] AND [http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/30.0/linux-x86_64/en-US/]
    How to build Firefox [https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Build_Instructions/Linux_Prerequisites]

  • Problem with installation application server 10g on Solaris 10 sparc

    Hello all.
    Help me, please.
    I'm trying to install Oracle aplication server 10.0.1.2.0.2 on Solaris 10 sparc.
    Server - Sun Fire v210.
    When i install oracle infrastructure(metadata repository and identify management),
    i have a problem - on first step of configuration "end of communication channel".
    Failed
    Anybody know, how solve this problem?
    Sorry for my english.

    There is known bug in installing Oracle10gAS infra. You have to apply the following note during the installation.
    see MetaLink Note:330016.1 for current AS 10.1.2 installation requirements for Solaris 10.
    Regards,
    Amir

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

  • Weblogic 10.3.0 on Solaris 10 Sparc

    Hello,
    Need Help!!!!
    I have installed WL 10.3.0 on Solaris 10 Sparc 64bits and i have this Error:
    <May 31, 2010 6:51:56 PM WEST> <Warning> <Socket> <BEA-000444> <Could not load the performance pack that can take advantage of /dev/(e
    )poll device due to:
    java.lang.NegativeArraySizeException.
    Will attempt to use the performance pack that does not depend on /dev/(e)poll device.>
    # A fatal error has been detected by the Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0xffffffff08b04e68, pid=5539, tid=74
    # JRE version: 6.0_20-b02
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (16.3-b01 mixed mode solaris-sparc )
    # Problematic frame:
    # C [libmuxer.so+0x4e68]
    # An error report file with more information is saved as:
    # /app/weblogic/domains/smpftth/hs_err_pid5539.log
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Does any one knows how to help me?

    Here is the text from the download site from 10.3.3 that applies to 10.3.0 as well:
    Note: This table includes links to WebLogic Server installers that include 32-bit JVMs for the platform
    in question, and links to WebLogic Server generic installers that can be used on any supported platform.
    To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
    platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic
    installers do not include a JVM/JDK. For instructions on using the generic installers, see this document.
    So regardless whether the OS is 64bit or not, you need to select the installer on whether you are running WebLogic Server in a 32bit JVM or a 64bit JVM. If you run in a 32bit JVM, you can use the 32bit binary installer for Solaris that has a .bin extension. If you are going to run a 64bit JVM, then you need to download the "generic" .jar installer and separately download the supported 64bit JDK and follow the instructions similar to this, but for 10.3.0.
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABGFAAF
    On edelivery.oracle.com, select Oracle Fusion Middleware, then Oracle® Application Server 10g Release 3 (10.1.3) Media Pack for Oracle Solaris on SPARC (64-bit)
    32bit native Solaris installer for 10.3.0 is Part Number V13618-01
    64bit generic installer for 10.3.0 is Part Number V13672-01

  • How I can emulate Solaris 10 sparc on a Virtual Machine?

    Hi for all.
    Guys, I need to emulate an environment Solaris 10 in my job. We have an application that just run in this kind of environment. But, I found some problems when I try to install Solaris 10 Sparc on Virtual Box. I think that the problem is the type of architecture that are differents.
    So, someone knows a way to emulate Solaris 10 sparc architecture on a Virtual Machine. Doesn't matter the Virtual Machine application (Virtual Box, VMWare, etc..). Somebody Help me?

    HI Srini_Chavali
    I'm using the Solaris 10 u11.
    In fact, Virtual Box supports Solaris u6 and higher. I have an installation of Virtual Box running Solaris x86. But, the problem occurs when I try to create a Virtual machine to work with Solaris 10 Sparc architecture.
    The errors that appears on the screen are:
    "No bootable medium found! System Halted" and "FATAL: Could not read from the boot medium! System halted"
    This error occurs just with Architecture sparc.

  • SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)

    Dear All;
    i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
    SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
    for the SAP i did the following configurations
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
    and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
    it executes the startsap scripts successfully as following
    Sun Microsystems Inc.     SunOS 5.10     Generic     January 2005
    stty: : No such device or address
    stty: : No such device or address
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host eccprd01 started
    Starting SAP Instance ASCS00
    Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
    saposcol on host eccprd01 started
    Running /usr/sap/PRD/SYS/exe/run/startj2eedb
    Trying to start PRD database ...
    Log file: /export/home/prdadm/startdb.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    /usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
    Starting SAP Instance SCS01
    Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    Instance on host eccprd01 started
    Instance on host eccprd01 started
    and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
    Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:28 eccprd01 last message repeated 1 time
    Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:46 eccprd01 last message repeated 1 time
    Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:49 eccprd01 last message repeated 1 time
    Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:52 eccprd01 last message repeated 1 time
    Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:58 eccprd01 last message repeated 1 time
    Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:01 eccprd01 last message repeated 1 time
    Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:04 eccprd01 last message repeated 1 time
    Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:13 eccprd01 last message repeated 1 time
    Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:16 eccprd01 last message repeated 1 time
    Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:22 eccprd01 last message repeated 1 time
    Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:25 eccprd01 last message repeated 1 time
    Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:34 eccprd01 last message repeated 1 time
    Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:37 eccprd01 last message repeated 1 time
    Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:43 eccprd01 last message repeated 1 time
    Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:46 eccprd01 last message repeated 1 time
    Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
    can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
    ARSSES

    Hi all.
    I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
    Scenrio:
    Central Instance (not incluster) : Started on one node
    Dialog Instance (not in cluster): Started on the other node
    When I create the resource for SUNW.sap_as like
    clrs create --g sap-rg -t SUNW.sap_as .....etc etc
    in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
    Then after timeout it gives up.
    Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
    TIA

Maybe you are looking for