Solaris 10 (Sparc) - not entering window environement.

I have installed Solaris 10 in a Blade 100 and upon rebooting from the install it goes directly to a command line login on the console. The graphical login does not start. I have installed on this system twice now with the same results. Install was from CD's. I also have another system that I installed this on - same setup - but was installed from DVD media. The one installed from DVD booted right into the graphical login as expected. Any idea why this system is not?

It is working now - I ran sysid-unconfig, rebooted, re-entered all the info and it rebooted and came up to the login screen.

Similar Messages

U310 not entering Windows

Hello,
I've had my U310 for a while now and had to send it to my warranty center because the computer would not boot up or enter the BIOS menu at all. They couldn't figure out the underlying cause so they replaced my harddrive and sent it back.
I am not the most computer savvy person, so please bear with me. When I got it back I decided to install all the updates from Lenovo's support site. It booted super slowly compared to before, could this be a problem with the SSD or RAID?
When I installed the BIOS update I couldn't get my computer to enter Windows. I constantly return to this menu:
How do I fix my laptop so I can get it to the way it was the day I bought it? I'm afraid it wasn't really fixed after all.
Thank you!

Hi PrestoPasta,
Welcome to the Lenovo Community,
Would you kindly post a better resolution picture of the screen as I am unable to read what it says and therefore cant really help you troubleshoot.
Gracias y Saludos,
Miguel A. González
Spanish Community Manager
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество
Los puntos de vista y asesoria que expreso aquí son míos y no reflejan necesariamente la posicion oficial de Lenovo.
Es importante recalcar también que los foros suplementan los recursos de los usuarios de Lenovo pero no reemplazan el servicio técnico oficial. Para un listado de números de servicio sigue el enlace: Numeros de Soporte

Solaris 10 Sparc not rebooting in graphical environment

I've installed Solaris 10 on Sparc. When I reboot the system it only boots into character login prompt. I then logged in and cd /usr/dt and executed dtlogin which enabled me to bring up the graphical environment. This is a brand new install on some old hard drives.
When I installed 9 last week on this same machive, but different harddrive, the graphical login always came up.
What have I done or doing wrong. I installed solaris 10 for sparc and chose automatic reboot after installation so there weren't any other questions that I may have missed during the install.
Any help appreciated. Thanks.

It is working now - I ran sysid-unconfig, rebooted, re-entered all the info and it rebooted and came up to the login screen.

Cold backup of High Availability DB 10gR2 in SOLARIS 8 SPARC

Hi
I want to know the procedure of taking Cold backup in Solaris 8 SPARC in
High Availability Environment.
Any reference document will be helpful.
Thanks in advance.
Renuka

That seems to be a contradiction in terms, high availibility and cold backup. When you do a cold backup the database is down and not available. In a primary - standby configuration, you could switch the standby to primary, shutdown the (former) primary and perform a cold backup of it.

@variable and Operating system variables (Windows environment variables)

Hi,
Has anyone experience with using @variable and Operating system variables (Windows environment variables)in XI 3.x Web Intelligence ?
Help gives the example of @Variable(NUMBER_OF_PROCESSORS). Even with syntax correction @Variable('NUMBER_OF_PROCESSORS') it does not seem to work.
It works fine for Desktop Intelligence. Environment variables added are read, after restarting DeskI. If already in an existing DeskI session, newly added (unknown) variable names give a prompt with the variable as prompt text as a result. This is the behavior in Web Intelligence, even for environment variables that are always set (like Path, TMP, ...)
Both WebI Rich Client and WebI via Infoview in XI 3.1 and XI 3.1 SP2 show this behavior (prompt instead of @variable behavior)
Are there settings that need to be made? other syntax ?
Is this a DeskI only feature ?
Thanks!
Raf
Edited by: Raf on Oct 30, 2009 3:44 PM

Hi Abdellatif,
Ok, that would clarify things.
You have an idea if this is documented somewhere?
Reason we ask:the "xi3-1_designer_en" guide, the specification for the @variable function states:
"BusinessObjects system variables. ...
Report variables. ...
Operating system variables. You can enter Windows environment variables in order to obtain information about your installation.
Custom variables. With Desktop Intelligence, you can use a predefined text file to provide a list of fixed variable values."
There's no explicit referal to DeskI only for OS system variables, like there is for custom variables.
Thanks!
Raf

Could not locate new host added from Solaris 10 Sparc servers

Hi All,
I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located from other hosts that runs Red Hat Linux and Windows XP. By restarting nscd daemon with the following commands did not help:
# svcadm disable system/name-service-cache
# svcadm enable system/name-service-cache
Below is the static IP address detail for the Solaris 10 server:
$ showrev
Hostname: angel
Hostid: 4e2f56yu
Release: 5.10
Kernel architecture: sun4v
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.10 Generic_144488-12
$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.56.120.12 netmask fffffe00 broadcast 10.56.121.255
The same detail on a Red Hat Linux server that can locate jodie is:
root@bobby /sbin>uname -a
Linux bobby.abc.com 2.4.18-3 #1 ...... i686 unknown
root@bobby /sbin/ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:20:ED:5D:2F:94
          inet addr:10.56.8.218 Bcast:10.56.15.255 Mask:255.255.240.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:653366594 errors:0 dropped:0 overruns:698544 frame:0
          TX packets:5815250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:2492338569 (2376.8 Mb) TX bytes:1003467939 (956.9 Mb)
          Interrupt:10 Base address:0xd000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:145903 errors:0 dropped:0 overruns:0 frame:0
          TX packets:145903 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12496874 (11.9 Mb) TX bytes:12496874 (11.9 Mb)
Likewise, the IP configuration on my Windows XP PC that can also see jodie after having flushed its local dns cache with "ipconfig /flushdns":
C:\Documents and Settings\crystal>ipconfig -all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : BEATLE
        Primary Dns Suffix . . . . . . . : musician.abc.com
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : musician.abc.com
                                            abc.com
                                            abc.com
                                            com
Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix . : abc.com
        Description . . . . . . . . . . . : Intel(R) 82566DM Gigabit Network Connection
        Physical Address. . . . . . . . . : 00-19-BB-55-79-90
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 10.56.3.91
        Subnet Mask . . . . . . . . . . . : 255.255.240.0
        Default Gateway . . . . . . . . . : 10.56.0.1
        DHCP Server . . . . . . . . . . . : 10.56.19.157
        DNS Servers . . . . . . . . . . . : 10.56.0.2,10.56.0.33What I suspect is the DNS configuration on angel (Solaris 10) to lookup DNS server (10.56.0.2, 10.56.0.33) is not correct, or that it is on another subnet (10.56.120.0) and require additional setup to see other hosts that do not belong to its own subnet. angel has only recently been built and its likely that its DNS setup has not been configured correctly.
Other Solaris 10 Sparc servers on the same subnet 10.56.120.0 also experienced the same issue even though they have been around for a while. Nevertheless, their DNS configuration may have been manually configured to see certain subnets and not 10.56.4.0 where jodie lives.
Any idea on where the problem lies?
Thanks in advance,
Crystal

Hi All,
I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located from other hosts that runs Red Hat Linux and Windows XP. By restarting nscd daemon with the following commands did not help:
# svcadm disable system/name-service-cache
# svcadm enable system/name-service-cache
Below is the static IP address detail for the Solaris 10 server:
$ showrev
Hostname: angel
Hostid: 4e2f56yu
Release: 5.10
Kernel architecture: sun4v
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.10 Generic_144488-12
$ ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.56.120.12 netmask fffffe00 broadcast 10.56.121.255
The same detail on a Red Hat Linux server that can locate jodie is:
root@bobby /sbin>uname -a
Linux bobby.abc.com 2.4.18-3 #1 ...... i686 unknown
root@bobby /sbin/ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:20:ED:5D:2F:94
          inet addr:10.56.8.218 Bcast:10.56.15.255 Mask:255.255.240.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:653366594 errors:0 dropped:0 overruns:698544 frame:0
          TX packets:5815250 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:2492338569 (2376.8 Mb) TX bytes:1003467939 (956.9 Mb)
          Interrupt:10 Base address:0xd000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:145903 errors:0 dropped:0 overruns:0 frame:0
          TX packets:145903 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12496874 (11.9 Mb) TX bytes:12496874 (11.9 Mb)
Likewise, the IP configuration on my Windows XP PC that can also see jodie after having flushed its local dns cache with "ipconfig /flushdns":
C:\Documents and Settings\crystal>ipconfig -all
Windows IP Configuration
        Host Name . . . . . . . . . . . . : BEATLE
        Primary Dns Suffix . . . . . . . : musician.abc.com
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : musician.abc.com
                                            abc.com
                                            abc.com
                                            com
Ethernet adapter Local Area Connection:
        Connection-specific DNS Suffix . : abc.com
        Description . . . . . . . . . . . : Intel(R) 82566DM Gigabit Network Connection
        Physical Address. . . . . . . . . : 00-19-BB-55-79-90
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 10.56.3.91
        Subnet Mask . . . . . . . . . . . : 255.255.240.0
        Default Gateway . . . . . . . . . : 10.56.0.1
        DHCP Server . . . . . . . . . . . : 10.56.19.157
        DNS Servers . . . . . . . . . . . : 10.56.0.2,10.56.0.33What I suspect is the DNS configuration on angel (Solaris 10) to lookup DNS server (10.56.0.2, 10.56.0.33) is not correct, or that it is on another subnet (10.56.120.0) and require additional setup to see other hosts that do not belong to its own subnet. angel has only recently been built and its likely that its DNS setup has not been configured correctly.
Other Solaris 10 Sparc servers on the same subnet 10.56.120.0 also experienced the same issue even though they have been around for a while. Nevertheless, their DNS configuration may have been manually configured to see certain subnets and not 10.56.4.0 where jodie lives.
Any idea on where the problem lies?
Thanks in advance,
Crystal

Bursting control file for Printer not working in WINDOWS ENVIRONMENT

Hi,
We are trying to print xml publisher report output (PDF) using bursting control file. Is not wokring.
We are using ebs (R12.1.1) on Windows environment.
Any pre-requisite setup (ie. cups config) should be done before printing using control file. Please guide me i am not having knowledge in printer setup and printer part..
Thanks in advance
--Ben

Hi Hussein,
Yes, I am able to print seed concurrent report (o/p -text) to that printer (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
When i do the same for xml publisher publisher report to the same printer , its not working using bursting control file.
I too made the test in xml publisher report without bursting control file , there i faced another new issue. Let me explain
1. We are using RDF as data source . here o/p :-" XML "
2. We are using RTF as layout. In template definition, i chose the default o/p type as :- "HTML"
3. When i submit the request, i choose the printer which is working fine for printing seeded report. (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
4. My printer getting prints HTML tag, instead of desired o/p. I wondered after seeing the printout.
5. I cross checked by clicking view output, its showing me the exact html output as per RTF layout.
Dont know wat happening ??? Help me out.
i did the same for changing default output type in template definition to RTF,PDF.. its printing source code of the output type instead of printing output.
Thanks & Regards,
--Ben

IPod Help needed from serious Apple gurus - iPod Touch 2g 16g stuck in restart loop. Will NOT enter DFU or recovery mode, NOT recognized by iTunes on Windows or Mac

Ok, so here's the not so sad story. I bought an iPod Touch 2g 16g through Ebay - so forget warranties. Luckily I did not pay much. The description said it was stuck on the apple logo, so I figured it would be an easy put into recovery mode and restore problem.
Not so much.
If you plug the iPod in and charge up the battery the LCD will come to life after a while with the apple logo, then it displays the spinning wheel with the apple logo over it. That will last anywhere from 10 - 15 minutes, then the iPod will go blank for a few secs and then start up the cycle all over again.
As stated, this iPod will NOT enter either DFU or recovery mode and believe me I've tried it several times several different ways with different timings, connected via USB to a Mac, connected to a different Mac running Windows, and connected to just the charger. Nothing. Occasionally the screen might go blank while holding the power and home buttons but nothing else happens and then it starts it's usual cycle again.
Again, iPod NOT recognized by iTunes on either Mac or Windows side. Since I got off Ebay and seller didn't know much about it, I have no idea if someone tried to jailbreak this or not.
I will not put much money into this machine. So I guess my question is: does this behavior mean that the motherboard is clearly fried? Are there any software programs that might diagnose what the problem is? Could it be as simple as a fried battery?
And most importantly, is this iPod simply toast or is there anything anyone can suggest????
Really any suggestions would be greatly greatly appreciated. Seems a shame to just trash an iPod touch that might need a simple fix...
If it helps matters, I can tinker with iPods somewhat and have torn down and replaced several iPod touch 1g and 2g glass and digitizers with no problems. I'm somewhat software savvy but the whole jailbreak thing is new territory... and I can't really figure out the command in Windows or Mac terminals to list all connected devices so I have no idea if the computer even knows the iPod is there, even if iTunes doesn't. Guess that's it... ummm, please help???

Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I realize that my licenses are not recognized by Adobe. I am desperate

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I now (and a bite late) realize that my licenses are not recognized by Adobe. I am desperate. I cannot afford the expense of buying or paying access to the software and, still, I need the tools for all those little things I do for enjoyment. What can be done?

The licenses are operating system specific, so one option would be to retain use of the Windows machine you had before the Mac.
If you want to try to use the older stuff on your new Mac you can try installing Windows emulation software such as Bootcamp.

10.2.0.3 on solaris 9(Sparc 64 bit), patch 5257399 needed or not?

We are going to install oracle 10.2.0.3 on a Solaris 9 (Sparc 64 bit) box. According to Note 406472.1, Mandatory Patch 5752399 is needed for 10.2.0.3 on Solaris 64-bit and Filesystems Managed By Veritas or Solstice Disk Suite software. Our system is not on SAN, only local disks, so I'm sure we don't use veritas file system. But I'm not sure if we still use Solstice Disk Suite software. Sun said that in Solaris 9, Solstice Disk Suite is renamed to Solaris volume manager and it is bundled in Solaris 9. Does this mean Solaris 9 is using Solstice Disk Suite by default and we have to apply patch 5752399?
How can I verify which file manager we are using? (Our sys adm is not quite sure).
If we apply the patch no matter we really need it or not, what impact to the system?
Please advise. Thanks!

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?

Hi All,
When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
otherwise guide me to download page.
Thanks and Regards
Arunachalam.C
Edited by: arungoin on Feb 16, 2011 4:55 PM

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

Firefox 17.0.2 for Solaris 10 (sparc) (contrib) not available

There is a security finding on Firefox 17.0.1 (CVE-2013-0759), and we need to install Firefox 17.0.2 for Solaris 10/sparc. We have to use the 17.x series. For some reason the "ftp://ftp.mozilla.org/pub/firefox/releases/17.0.2esr/contrib/" directory is empty.

Has there been any additional info from Oracle as to when they might update Firefox for Solaris 10 SPARC beyond 10.0.7 ESR (''aka Patch ID #145080-12'')? I have not been able to find the referenced package for 10.0.12 ESR within MOS. Realistically, I really need 17.0.5 ESR or later -- the contributed versions are not an option due to their questionable source (''i.e., Beijing'').

Solaris 7 sparc 64 bit jdk giving error:referenced symbol not found

hi
I have installed jdk 5.0 on solaris 7 sparc for 64 bit support
I am getting this error while giving java, plz help me
dl failure on line 717Error: failed /els/install/jdk1.5.0_04/jre/lib/sparcv9/server/libjvm.so, because ld.so.1: java: fatal: relocation error: file /els/install/jdk1.5.0_04/jre/lib/sparcv9/server/libjvm.so: symbol __1c2n6FL_pv_: referenced symbol not found

I got this problem too.
have fixed this?
whether should we patch the os first?

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Bootcamp windows 8 will not enter safe mode

My bootcamp windows 8 will not enter safe mode. I've tried press Fn + F8 multiple times.

http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including- safe-mode

Solaris 10 (Sparc) - not entering window environement.

Similar Messages

Maybe you are looking for