Solaris 10. There is no adapter found from fcinfo

Need help? What are missing? Thanks in advance. Y4.
I know for fact that my server is configured with 4 and/or more Qlogic 23xx HBA cards but I get nothing when run fcinfo hba-port -l
*# fcinfo hba-port -l*
No Adapters Found.
# grep -i 'version' /var/adm/messages*
/var/adm/messages:Oct 2 17:07:03 myserver qla2300: [ID xxxxxx kern.notice] hba0: QLogic Fibre Channel Host Adapter fcode version 2.00.09
/var/adm/messages:Oct 2 17:07:04 myserver qla2300: [ID xxxxxx kern.notice] hba1: QLogic Fibre Channel Host Adapter fcode version 2.00.09
/var/adm/messages:Oct 2 17:07:03 myserver qla2300: [ID xxxxxx kern.notice] hba2: QLogic Fibre Channel Host Adapter fcode version 2.00.09
/var/adm/messages:Oct 2 17:07:04 myserver qla2300: [ID xxxxxx kern.notice] hba3: QLogic Fibre Channel Host Adapter fcode version 2.00.09

Hi Rajendra,
Thanks for the response. I had gone through the notes which says portal version prerequisites are SP 29 and above . Also ui had gone throught one more "1549377" note which again says prerequisites Portal 7.0.1 with SP8.
My consumer portal is 7.0.1 with SP 7 and producer is 7.3 version . Is the portal version and SP level is creating the issue?
Regards,
V Karthi

Similar Messages

  • Is there a bluetooth adapter for my Samsung printer that lets me connect by bluetooth from my Mac to the printer

    I have a MacBook with OSX 10.9.5.  It prints fine to my Samsung ML2525W printer via direct USB cable.  I'd like to be able to print using bluetooth.  Is there a bluetooth adapter I can attach to my printer to send documents to the printer via Bluetooth on my computer?  The bluetooth on the laptop and my MacMini work fine for sending files between the 2 computers, just not to the printer.  I do NOT have a wireless network but rather use a Verizon Mifi Mobile Hotspot for all my Internet access from both computers, iPad, iPhone.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.

  • Anyone know if there is an adapter to record audio from an outside source in real time to an iphone 4s or 5s video?

    Anyone know if there is an adapter to record audio from an outside source in real time to an iphone 4s or 5s video?

    Hi @imobl,
    You sound like an Apple support guy who hasn't been able to answer my questions.
    To respond to some of the points you made,
    - I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
    - you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
    - all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
    And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
    Please refrain do. Responding if there is nothing to add.

  • Receiver JMS ( websphere MQ ) error  - No transition found from state:ERROR

    Hi all
    we are using JMS adapter to connect to the Queue manager . whenever the queue manager restarts , the messages is not getting thru and it is struck in the adapter engine with status " not to be delivered "
    i am getting error in receiver communication channel audit log....its showing
    *MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_XXXXXXXXX:15fa03eb9fd837849906f512610314c4*
    note : already i have gone thur many forum  and nothing helps.
    Thanks in advance
    Faheem

    If you are using the FCC then this could be because of that. What is the connection status with MQ? Are there any connection errors with MQ.
    If you are using FCC in your Receiver JMS channel then just to confirm, first remove the FCC configuration and try to send a xml file. If the xml file goes in successfully then the problem is in your FCC configuration.

  • No transition found from state: STARTING

    Hi Experts,
    I am doing a scenario with JMS receiver communication channel, and there is an error occurring when I send the data to JMS adapter:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from state: STARTING, on event: process_commence for DFA: CC_JMS_RECEIVER:d0058f0da62e309ba0930891dc300ee8
    Please someone gives me an idea!
    Thanks a lot,
    Thien Duong

    Hi Thien,
    Thats better , atleast with you giving a little background now i can start with my work. As you say thats it difficult for you to establish a trace it would be even more difficult from over here but still. Starting with first things first.
    1) The drivers and there version need to be correct and hope they are deployed correctly.
    2)
    Hope these links are useful to you..
    configuration of JMS  adapter Using WebSphereMQ
    connection with the JMS provider
    http://www-1.ibm.com/support/docview.wss?uid=swg21180117
    http://www-1.ibm.com/support/docview.wss?uid=swg21105655
    Regards
    joel

  • No WiFi adapter found after windows 10 upgrade

    Yesterday I upgraded to Windows 10 from Windows 8.1 but after the upgradation the WiFi does not works.There was no WiFi adapter found and the same goes for Bluetooth.Please assist from where can these drivers be downloaded

     I had no wireless after updating my Pavilion DM4 3002ea to Windows 10 Home 64bit. None of the solutions on here worked for me but I stumbled across the solution when I'd given up and decided to re-install Windows 7. I think the problem arises when you instal Windows 10 without the wireless adapter being switched on so ...  1. Set the BIOS to boot from CD/DVD first2. Boot from Windows installation DVD and once it loads to the installation screen I found I could switch the wireless adapter on.3. Once the wireless adapter is switched on remove the Windows installation DVD from the drive and boot as normal to Windows 10 and "hopefully" you will be able to switch off Flight mode and input your wireless network details

  • Is there a way to downgrade from iOS 5.1.1 to iOS 4.1 without any unauthorised modifications (e.g. jailbreaking)?

    I found this piece of information: http://osxdaily.com/2012/06/18/downgrade-ios-6-beta-to-ios-5/ Yes, it's about downgrading from iOS 6 beta, not iOS 6, but the way to downgrade to a previous version of iOS is basically the same.
    I have an iPhone 4 running iOS 5.1.1 and an iPod touch 4 running iOS 5.1.1 as well. None of them is 'jailbroken'. I upgraded my iPod touch to iOS 6 for exploring it a bit more and reverted back to iOS 5.1.1. How? I did it the way stated by the website I mentioned above: just by Option-Clicking the 'Restore' button on iTunes and select the iOS 5.1.1 software. No need to enter recovery mode or DFU mode whatsoever.
    In fact, Apple doesn't allow users to downgrade to a previous version of iOS: 'Downgrading to a previous version of iOS is not supported.' (http://support.apple.com/kb/TS3694) The reason why I could downgrade from iOS 6 to iOS 5.1.1 may be, as the above website said, 'Typically you can’t downgrade iOS versions so easily, but because Apple is still signing iOS 5.1.1 this allows downgrading to commence with minimal effort.'
    I was wondering whether I could revert all the way from iOS 5.1.1 to iOS 4.1 (the version that was shipped along with the launch of the iPod touch 4 in September 2010). (for experimental purposes)
    I downloaded the iOS 4.1 (a list of iOS software: http://osxdaily.com/2010/10/30/download-ipod-touch-firmware-ipsw/) and tried Option-Clicking when restoring this iOS 4.1 — no luck. iTunes said 'This device is not eligible for the requested build'. And I did a bit of research and found that there are ways to downgrade from iOS 5.1.1 to iOS 4.1, but it seems you have to jailbreak the device, which is complicated and I don't want to do.
    So, is there a way to downgrade from iOS 5.1.1 to iOS 4.1 without any unauthorised modifications (e.g. jailbreaking)? Thanks in advance.

    No, downgrading from any version of iOS to an earlier version is not supported.

  • My iPod Classic 160GB is not recognised on iTunes - it says that there is no iPod found? When its plugged in! Please help

    iPod classic is not recognised on iTunes. My iPod screen is flickereing constantly - from upside down to the right way around. It wont even show up on my iTunes. I plug it in to my MacBook and it gives me the option to restore but then once Ive clicked it says that 'it cannot be restored as there is no iPod found' when it connected and it says so on my iPod screen. Please help! Thanks J

    Tried resetting the ipod and its enabled to be used as hard disk on itunes.
    I assume you mean the "Enable Disk Use" option is enabled from under the iPod's Summary tab?
    B-rock

  • SRFC-adapter  and file adapter with error: no adapter found

    Hello,
    we have two scenarios here in an XI 3.0 SP12:
    First scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
    The RFC is synchronous.
    Second scenario uses file adapter to send file from A to B.
    When starting the RFC call from the sender system the error message in area "call adapter" for XML message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
    Message in RWB:
    "Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
    Same problem for file adapter!
    Here is the message from the file adapter error log entry in SXMB_MONI:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.kx1.test038</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.kx1.test038</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Looks like an identical problem for both adapter.
    What we have done (checked) so far:
    - SLD connection is working
    - Vis.Admin.: no problems found
    (SAP RFC adapter active, file adapter active)
    - Component monitoring: no errors, adapters are fine
    - all rfc connections checked: ok
    - have checked user and pwd and replaced to be sure
    - cache refresh: ok
    - reimport of SWCV to IR for RFC: done, no result
    Does anybody have an idea, how to get rid of that?
    Best regards
    Dirk

    Hello Udo,
    in Adapter monitoring all adapters are listed and per adapter (here RFC and FILE) all adapter entries from the scenarios are available (sender / receiver comm. channel entries - in green)!
    Pipeline URL in SLD Bus. Syst. is fine ( and an IDOC adapter scenario is running successfully) !
    I think this is a really tricky one!
    Best regards
    Dirk

  • UCM Log in error : Error 404--Not Found From RFC 2068 Hypertext Transfer Pr

    i am not able to get ucm login page , admin and manage server is up and there is no error in logs . but iam getting below error in login page
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

    Hi ,
    This is an indication that ECM cs.ear deployment has failed for some reason . To get the exact reason either check ucm_server1.log or start the server from command line and there the errors will be shown.
    Copy the core part and post it .
    Thanks
    srinath

  • TS2634 Is there any cassette adapter that will work with an Ipod Touch 4th Generation?

    Is there any cassette adapter that works with an Ipod Touch 4th Generation?  I just got the Ipod Touch 4G and the cassette adapter I have that worked with my other Ipod says it is not compatible with the Touch 4g.  Any suggestions?

    It should work since from my knowledge the output from the headphone jack has not changed. Is the plug fully inserted into the jack?

  • How OSB AQ adapter dequeue from database AQ ?

    Hi,
    Could someone please tell me how OSB AQ adapter dequeues from database AQ ?
    Does it ask database frequently ? Or just hangs on database ?
    Or database AQ notifies OSB when something comes to AQ ?
    Regards,
    Cezary

    I don't have any experience with AQ adapter for OSB, but when I was working with AQ library for JMS I had the same question and found out that it was polling the database.

  • Is there any app to quit from application with out pressing home button every time

    is there any app to quit from application with out pressing home button every time?

    Months ago my home button was screwed up, and I was worried. I'd have to wait atleast for a week to get it repaired as I was busy with my exams. So I found a solution. Goto Settings->General->Accessibility.
    Scroll down, and under "Physics & Motor", select "Assistive Touch". Toggle it on, and you get lots of options. You don't need to click the home button all the time. It is a very simple widget like stuff, that stays no matter what app you're using and you can do various functions with it. Initially, it's irritating as you see it everywhere. But it fades itself out and appears when needed. After you get used to it, it's really helpful.

  • I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck

    Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck

    10.7 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is $19.99.
    You must have at least a Late 2006 model 2,1 MacBook.
    The model 2,1 (Late 2006 & Mid 2007) can use 3gb of 200 pin 667mhz PC2-5300 RAM
    The model 3,1 (Late 2007) can use 6gb of 200 pin 667mhz PC2-5300 RAM
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. You can put two 2gb RAM sticks in the model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. the model 2,1 is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Maybe you are looking for