Solaris 10, ttymon, ID 673977 user.crit
Hello every Pro-admins,
I'm confiuse when I see after I run #dmesg:
Jul 4 12:38:50 max mwkjanct:x:<--error detected here
Jul 4 12:38:50 max ttymon[7249]: [ID 673977 user.crit] invalid mode: x
Jul 4 12:38:50 max ttymon[7249]: [ID 201231 user.crit] Parsing failure in the "Initial flags" field
Jul 4 12:38:50 max mwkkowam:x:<--error detected here
Jul 4 12:38:50 max ttymon[7249]: [ID 673977 user.crit] invalid mode: x
Jul 4 12:38:50 max ttymon[7249]: [ID 201231 user.crit] Parsing failure in the "Initial flags" field
Jul 4 12:38:50 max mwkmistm:x:<--error detected here
Jul 4 12:38:50 max ttymon[7249]: [ID 673977 user.crit] invalid mode: x
Jul 4 12:38:50 max ttymon[7249]: [ID 201231 user.crit] Parsing failure in the "Initial flags" field
But first I disable # /usr/dt/bin/dtconfig -d. There is a connection between these dmesg and dtconfig?
Could you help me fix above problem. I really cannot find solve. It is possible find IDs warning (e. g. ID 201231 user.crit)
BR
Piotr
after installing sol 10_72 su worked.
then i needed to re-install the directory server. from that moment on i had exactly the same problem as you have.
if i configure the runtime library env like this:
crle -c /var/ld/ld.config -l /lib:/usr/lib:/usr/lib/mps
(using the paths ldd shows),
su works again
hth
markus
Similar Messages
-
IdM 8.1: Problems to provision Solaris 10 with non root user.
Hello
When IdM 8.1 tries to create a user into Solaris 10 I got this Error:
com.waveset.util.WavesetException: An error occurred adding user 'testSolaris' to resource 'Test_Solaris'. com.waveset.util.WavesetException: Script failed waiting for "_,)#(:" in response "> > > > > > > > > > > pbmasterd3.5.4-01: 5408.07 select: Bad file number [email protected]: 3005 Request en...roblem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly " com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "> > > > > > > > > > > pbmasterd3.5.4-01: 5408.07 select: Bad file number [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly pbmasterd3.5.4-01@pbr9c: 5430.1 header problem in readMuxHeader fd 1. - fd closed unexpectedly [email protected]: 3005 Request ended unexpectedly ".+
*The non root user has the privileges that describes the IdM documentation. This error doesn't occure when the connection user is root.*
*What's wrong?*The non - root doesn't work yet. I try to use a user with SUDO = TRUE but I got this error when I Test the connection:
Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "++_,)#+(:".+
I haver already configured the parameter tty_tickets to TRUE and the sudoers file as following:
+# sudoers file.+
+#+
+# This file MUST be edited with the 'visudo' command as root.+
+#+
+# See the sudoers man page for the details on how to write a sudoers file.+
+#+
++Defaults syslog=auth+
Defaults:idm_sudo tty_tickets
root ALL=(ALL) ALL
idm_sudo ALL = NOPASSWD: /usr/bin/auths,/usr/sbin/groupadd,/usr/sbin/groupdel,/usr/sbin/groupmod,/usr/bin/last,/usr/bin/listusers,/usr/bin/logins,/usr/bin/passwd,/usr/bin/profiles,
+/usr/bin/roles,/usr/sbin/useradd,/usr/sbin/userdel,/usr/sbin/usermod,/usr/bin/awk,/usr/bin/cat,/usr/bin/chmod,/usr/bin/chown,/usr/bin/cp,/usr/bin/cut,/usr/bin/diff,/usr/bin/echo,+
+/usr/bin/grep,/usr/bin/ls,/usr/bin/mv,/usr/bin/rm,/usr/bin/sed,/usr/bin/sleep,/usr/bin/sort,/usr/bin/tail,/usr/bin/touch,/usr/bin/which+
What's wrong? -
Solaris 10 svc:/milestone/single-user timeout during patch run
Hello all,
when doing a patch run (Oct 07 baseline) on a Solaris 10 client the machine rebooted into single user as per normal. However the time for the patches to be applied in single user took so long the single-user milestone timed out and the machine went into maintenance mode. The machine did continue to complete the rest of the patch run. Anyone else seen this and have a work around? I don't really want to blanket increase the service timeout. Selected console output below..
( 27 / 37 ) Installing '127111-02' - succeeded.
( 28 / 37 ) Performing 'Mandatory reboot with reconfigure and action as single-user'
( 29 / 37 ) Installing '127753-02' Nov 22 10:30:08 svc.startd[7]: svc:/milestone/single-user:default: Method or service exit timed out. Killing contract 31.Nov 22 10:30:08 svc.startd[7]: milestone/single-user:default failed: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Nov 22 10:30:20 svc.startd[7]: network/ntp:default failed repeatedly: transitioned to maintenance (see 'svcs -xv' for details)
Nov 22 10:30:20 svc.startd[7]: failed to abandon contract 45: Permission denied
- succeeded.
( 30 / 37 ) Installing '119757-09' - succeeded.
( 31 / 37 ) Installing '127737-01' - succeeded.
( 32 / 37 ) Installing '127718-01' - succeeded.
( 33 / 37 ) Installing '125184-04' - succeeded.
( 34 / 37 ) Installing '124444-01' - succeeded.
( 35 / 37 ) Installing 'postpatch' - succeeded.
( 36 / 37 ) Performing 'Reboot'
( 37 / 37 ) Performing 'Reboot with reconfigure'Hi, yes I see it all the time and it's normal and in fact documented in the release notes:
http://docs.sun.com/app/docs/doc/820-0428/6nc5u3kou?l=en&a=view#smftimeout
One workaround is to ignore it and not do anything! In fact I think that is the preferred workaround.
Another question, just out of curiosity, what does your "postpatch" Post action script do? Just wondering if it might be something useful for other sites too? -
Solaris 10 and create new user
I have got solaris 10, I want to create new user , ( Through command line and GUI), is there any guidline on net shows me step by step how to create user ?
I had created user, but I could not login through that user, I was able to login as root only.I tried many things, but I still could not login, therefore I asked if you can post me some link show me step by step , I reapt step by step how to create new user in Solaris 10,,,,,,,,,,should step by step,,,,,I know how to use: useradd and chown and mkdir in /export/home,,,,,,etc.
I relly appreciate if there is any link dives details for creating new user, because I could not find. -
Applying Solaris Patches that Require Single User Mode
Some OS patches require single user mode and reboot. Does the standard Solaris plugin patch management handle this? If not, could I write my own patch component and simply add "init 1; patchadd; init 6" to the execnative?
Thanks - JayI can't speak about the Solaris plugin, unfortunately, but a single execnative call wouldn't cover what you're trying to accomplish. There's an RFE for the core SPS system to add this capability, but I don't know that it will be added soon. Remember that when you switch runlevels, a number of start and stop scripts are invoked, shutting down and starting up a number of services. To do what you want to do, you'd have to have a start script for the RA in runlevel 1. You'd also have to have a way for the RA to execute a command on startup which isn't possible today. There'd have to be a way for the MS to deposit a command for the RA to execute, restart the RA in runlevel 1, the RA would have to read the command on startup and execute it, then restart the RA to runlevel 3 (or 6, whatever is your default or previous runlevel). It's all doable, to be sure, but not with changes to the core product.
-
Error in creating user for solaris
Hi.....
I am using IDM 6.0 version and configured resource solaris in IDM...but when tried to assign a user to solaris....the user is getting created in solaris box and resource exit for that user...but when tried to click on user for display or to update getting the Error
ERROR:Unresolved rule: getDefaultShell.
I dont know what to do...can any one help me please.....I got solution to my question i had to import shellrule file from /sample directory to IDM.
-
How to mount USB & CDROM drives from single user mode - Solaris boot disk?
Hi All,
I need to carry out ufsrestore on a single newly replaced system disk (no redundancy / mirroring) from either USB or CDROM drives from the following steps:
( i ) GRUB => e, e, cdrom –s, Enter, b (boot from Solaris 10 x86 media).
( ii ) Choose menu 1 for Install Solaris Interactive Mode to reach single user mode.Below are the commands that I have tried in single user mode without success:
mount –r –F pcfs /dev/dsk/c1t0d0p0 /cdrom (after unmount Solaris CD)
mount: /dev/dsk/c1t0d0p0 is not a DOS filesystem.
svcadm –v enable smserver
svcadm: Pattern ‘smserver’ doesn’t match any instances
svcadm enable autofs
svcadm: Pattern ‘autofs’ doesn’t match any instances
devfsadm
devfsadm: mkdir failed for /dev 0s1ed: Read-only file system
mkdir /mnt
mkdir: Failed to make directory “/mnt”; Read-only file systemPart of the problem is due to the current READ ONLY filesystems which does not allow the creation of mount point such as /mnt.
I have been able to create both / root (/dev/dsk/c1t0d0s0) and /export/home (/dev/dsk/c1t0d0s0) filesystems with newfs that are awaiting for restore using ufsrestore.
The only option I am left with is to attach a secondary disk to install Solaris 10 on either of them before bring the system to multi-user mode so that service such as volmgt, autofs, volfs are available to access USB & CDROM drives.
Any suggestion on how to resolve this issue?
Many thanks,
JackHi JKGN,
Is the directory a located under the root filesystem. ie /a? Are there any other mount point for say USB drive as well? I am not in a position to try it out right now but will get back
to you soon on whether /a exist or not.
Btw, the last thing I managed to do on this system at the time was added a secondary 1TB internal disk with the intention to restore both / and /export/home data onto this disk while
making use of all the disk device management services such as the following services only available in a fully installed Solaris system (both single & multi-user modes) installed on the
primary disk:
# svcs smserver
STATE STIME FMRI
online Jun_08 svc:/network/rpc/smserver:default
# svcs autofs
STATE STIME FMRI
online Jun_08 svc:/system/filesystem/autofs:default
# devfsadm
# iostat -En
c1t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: ATA Product: SAMSUNG HD321KJ Revision: 0-11 Serial No:
Size: 320.07GB <320072932864 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 41 Predictive Failure Analysis: 0
c0t0d0 Soft Errors: 0 Hard Errors: 5 Transport Errors: 0
Vendor: PHILIPS Product: DVD+-RW DVD8801 Revision: AD21 Serial
Size: 17.54GB <17538875392 bytes>
Media Error: 0 Device Not Ready: 5 No Device: 0 Recoverable: 0
Illegal Request: 10 Predictive Failure Analysis: 0
c2t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: JetFlash Product: Transcend 16GB Revision: 1100 Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
# rmformat
Looking for devices...
1. Volmgt Node: /vol/dev/aliases/cdrom0
Logical Node: /dev/rdsk/c0t0d0s2
Physical Node: /pci@0,0/pci-ide@1f,1/ide@0/sd@0,0
Connected Device: PHILIPS DVD+-RW DVD8801 AD21
Device Type: DVD Reader/WriterHowever, I was disappointed that "iostat -En" has not found the secondary disk (1 TB) even though it was available earlier, for Solaris installation as the only disk on the same system.
As a result, I am left with no option but the need to rebuild this system with only a single primary disk while in single user mode. However, the single user mode that I am in is the
one from Solaris installation disk with restrictive (_cannot create folder for mount point or running disk management utilities_) capability such as those services just covered, compared to one from a completed Solaris installation system with full access to all filesystems and utilities / commands in general.
I would very much value your assistance on how to mount both CD & USB in this restrictive limited Read Only OS (assume that it is running from memory) in order to get complete access to
the blank primary disk so that full restore with ufsrestore could take place.
Thanks in advance,
Jack
Edited by: 797805 on 9/06/2012 04:15 -
How to get the user piveliges in Solaris
Dear All,
In solaris how to get the user priveliges,
Example:lsuser -f "user name"
In AIX the above command will show the user priveliges,that user having su access or not like that,I want to know in Solaris,i gone through "ppriv" it not giving the valid information.
Kindly tell me how to get the user priveliges.
Regrads,
Venkatachalam.M-K- (!),
I followed your suggestions and it works well now. Do you know why I prefer to see the UI in english ? Because the help and everything else (documentation) is in english making very difficult to find in the french UI what is referred to in the english on-line help.
Merci de votre aide !
Christian -
Solaris Management Console doesn't show user's groups
Hello friends:
I am using Solaris 10 under Sparc.
i am having some problem with Solaris Managemen Console
With users -> users accounts -> edit a user
when i click on Groups TAB i can read:
The groups can not be listed. You can ....
It has been running, but sice 1 day ago it doesn't...
We don't use NIS or LDAP, only files.
/etc/nsswitch.conf is nsswitch.dns
groups command runs ok
cd /etc
ruben@laika:/etc$ ls -l nsswitch.*
-rw-r--r-- 1 root sys 1120 Apr 8 13:08 nsswitch.conf
-rw-r--r-- 1 root sys 1120 Jan 21 23:29 nsswitch.dns
-rw-r--r-- 1 root sys 757 Jan 21 23:28 nsswitch.files
-rw-r--r-- 1 root sys 1248 Jan 21 23:29 nsswitch.ldap
-rw-r--r-- 1 root sys 1228 Jan 21 23:28 nsswitch.nis
-rw-r--r-- 1 root sys 1558 Jan 21 23:29 nsswitch.nisplus
ruben@laika:/etc$ groups ruben
users
ruben@laika:/etc$
Where could be the problem?
How could i reinit solaris management console server.
Solaris has been restarted a lot of times without result :(
Thank'si have reinstalled solaris and the problem continues.
Under Solaris Management Console groups and users doesn't run ok. Editing an user i can't see groups and editing groups i can't see its users...very very extrange.
A bug?
I don't know what is happening :( -
Smpatch analyze fails to run on Solaris 10 Sparc systems
I have two Sparc Solaris 10 systems that I am unable to get to successfully patch. The 'sconadm' tool runs correctly, but smpatch bombs out with one of the following two errors:
Failure: Cannot connect to retrieve current2.zip: You are not authorized to access this service.
Failure: Cannot connect to retrieve detectors.jar: You are not authorized to access this service.'dmesg' suggests that it is failing to send the correct credentials to the update server:
Aug 18 12:23:01 pheasant root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@1bcdbf6 <=Caused by: java.io.IOException: Server returned HTTP response code: 403 for URL: https://getupdates1.sun.com/database/current2.zipIf I attempt to download this file in a web browser, my Sun Online credentials allow me to do so, so they are valid.
I've found threads of people with similar issues, but none of the presented solutions have worked for me. I've tried updating all the related patches, but to no avail.
I've downloaded the 'suc.sh' tool and supplied the output from one of my servers:
# ./suc.sh
User: root
Logname: root
Tue Aug 18 12:30:20 BST 2009
pheasant
smpatch settings:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current2
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
Failure: Cannot connect to retrieve current2.zip: You are not authorized to access this service.
Entitlement:
cat: cannot open /var/sadm/spool/cache/entitlement/*entitlement_client
Sun UC patch revision:
120335-04
121081-06
121081-08
121118-16
121453-02
122231-01
123003-03
123005-07
123630-03
123893-05
123893-15
124171-07
137137-09
Solaris release:
Solaris 10 5/09 s10s_u7wos_08 SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
Solaris Kernel: Generic_141414-07
Machine Type: sun4v
Platform: SUNW,SPARC-Enterprise-T5120
Java versions:
System default:
java version "1.5.0_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_19-b02)
Java HotSpot(TM) Server VM (build 1.5.0_19-b02, mixed mode)
Java 5:
java version "1.5.0_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_19-b02)
Java HotSpot(TM) Server VM (build 1.5.0_19-b02, mixed mode)
Java 6:
Unable to locate JRE meeting specification "1.6*"
Java used by smpatch and updatemanager:
/usr/sbin/pprosvc:JAVACMD="/usr/jdk/latest/bin/java -version:1.5+"
/bin/updatemanager:JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5+"
Cacao Java version:
java-home=/usr/jdk/jdk1.5.0_19
Cacao Base Directories:
cacao.install.rt.base.dir=/
cacao.install.etc.base.dir=/
Software Cluster:
CLUSTER=SUNWCXall
All ccr properties:
18:
Property not defined: 18
cns.assetid:
EpZ/R8Qb0Pm6RveZcxEkQs65/+Q=
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
ba7a3b27-d847-4abc-9453-ba80d2f6c2b0
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
cns.httpproxy.port:
cns.regtoken:
3912c9d8-22e8-41d9-8e09-e7b50f186b44:1280448000000:T
cns.security.password:
tKb+Hl+DUx8YZdtTk4Dw+keG66XcqAr7FgkCJ2LT96im
cns.security.privatekey:
-----BEGIN ENCRYPTED PRIVATE KEY-----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-----END ENCRYPTED PRIVATE KEY-----
cns.security.publickey:
-----BEGIN PUBLIC KEY-----
MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDKy2n+88gjTxo/4za2Q92l4XBQ
ZqCpJq0WFpdRvaEiRFXQJHtv66+XfKTUufq8CuFR8OLTSrA/PpTqSNTEBvmBJf7n
NG6lXBM2fvgakxTwjtaZkvZl3Yhf8gBJp8pptuyMihStlt+u+0CBdwMmrz91wGDQ
3MNdlDRdukKn66llLwIDAQAB
-----END PUBLIC KEY-----
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
https://cns-transport.sun.com
patchsvr not installed.
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Services in maintenance/disabled state:Hi, I'm also experiencing this issue. Is there an rss or bug list I can follow to check for eta/resolution?
-
Impossible to update Solaris 10
Hi,
I have difficulties to update Solaris.
When using the update manager, I get an error popup, but with a blank message .. not very easy to determine the problem ... and nothing logged in dmesg.
When I try smpatch update, or smpatch analyze, I get an error message: "Failure: Response code was 500"
And in dmesg I have the following
Nov 18 19:03:05 localhost root: [ID 702911 user.error] => com.sun.patchpro.util.CachingDownloader@9e5c73 <=Downloader.getResponseCode() : IOExceptionUnconnected sockets not implemented
Nov 18 19:03:05 localhost last message repeated 2 times
Nov 18 19:03:05 localhost root: [ID 702911 user.error] => [email protected] <=UnifiedServerPatchServiceProvider.downloadFile: Unable to create cache downloader.
Nov 18 19:03:05 localhost root: [ID 702911 user.error] => [email protected] <=java.io.IOException: Response code was 500
Nov 18 19:03:05 localhost at com.sun.patchpro.util.CachingDownloader.setSourceURL(CachingDownloader.java:302)
Nov 18 19:03:05 localhost at com.sun.patchpro.util.CachingDownloader.setupCache(CachingDownloader.java:208)
Nov 18 19:03:05 localhost at com.sun.patchpro.util.CachingDownloader.<init>(CachingDownloader.java:187)
Nov 18 19:03:05 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadFile(UnifiedServerPatchServiceProvider.java:1242)
Nov 18 19:03:05 localhost root: [ID 702911 user.error] => [email protected] <= at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadXmlFile(UnifiedServerPatchServiceProvider.java:586)
Nov 18 19:03:05 localhost at com.sun.patchpro.server.PatchServerProxy.downloadXmlFile(PatchServerProxy.java:168)
Nov 18 19:03:05 localhost at com.sun.patchpro.cli.PatchServices.downloadDocument(PatchServices.java:2118)
Nov 18 19:03:05 localhost at com.sun.patchpro.cli.PatchServices.downloadMotdDocument(PatchServices.java:2004)
Nov 18 19:03:05 localhost at com.sun.patchpro.cli.PatchServices.installPatches(PatchServices.java:1782)
Nov 18 19:03:05 localhost root: [ID 702911 user.error] => [email protected] <=null at com.sun.patchpro.cli.PatchServices.main(PatchServices.java:715)
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.util.CachingDownloader@198cb3d <=Downloader.getResponseCode() : IOExceptionUnconnected sockets not implemented
Nov 18 19:03:06 localhost last message repeated 2 times
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.server.UnifiedServerPatchServiceProvider@30d82d <=UnifiedServerPatchServiceProvider.downloadFile: Unable to create cache downloader.
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.util.CachingDownloader@13d28e3 <=Downloader.getResponseCode() : IOExceptionUnconnected sockets not implemented
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.server.UnifiedServerPatchServiceProvider@30d82d <=java.io.IOException: Response code was 500
Nov 18 19:03:06 localhost at com.sun.patchpro.util.CachingDownloader.setSourceURL(CachingDownloader.java:302)
Nov 18 19:03:06 localhost at com.sun.patchpro.util.CachingDownloader.setupCache(CachingDownloader.java:208)
Nov 18 19:03:06 localhost at com.sun.patchpro.util.CachingDownloader.<init>(CachingDownloader.java:187)
Nov 18 19:03:06 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadFile(UnifiedServerPatchServiceProvider.java:1242)
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.server.UnifiedServerPatchServiceProvider@30d82d <= at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadDatabaseFile(UnifiedServerPatchServiceProvider.java:928)
Nov 18 19:03:06 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadPatchDB(UnifiedServerPatchServiceProvider.java:468)Nov 18 19:03:06 localhost at com.sun.patchpro.server.PatchServerProxy.downloadPatchDB(PatchServerProxy.java:156)
Nov 18 19:03:06 localhost at com.sun.patchpro.database.MemoryPatchDBBuilder.downloadPatchDBWithPOST(MemoryPatchDBBuilder.java:163)
Nov 18 19:03:06 localhost at com.sun.patchpro.database.MemoryPatchDBBuilder.downloadPatchDB(MemoryPatchDBBuilder.java:752)
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.server.UnifiedServerPatchServiceProvider@30d82d <= at com.sun.patchpro.database.MemoryPatchDBBuilder.buildDB(MemoryPatchDBBuilder.java:108)
Nov 18 19:03:06 localhost at com.sun.patchpro.database.MemoryPatchDBBuilder.buildDB(MemoryPatchDBBuilder.java:181)
Nov 18 19:03:06 localhost at com.sun.patchpro.database.GroupPatchDBBuilder.buildDB(GroupPatchDBBuilder.java:108)
Nov 18 19:03:06 localhost at com.sun.patchpro.model.PatchProModel.downloadPatchDB(PatchProModel.java:1849)
Nov 18 19:03:06 localhost at com.sun.patchpro.model.PatchProStateMachine$5.run(PatchProStateMachine.java:277)
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.server.UnifiedServerPatchServiceProvider@30d82d <=null at com.sun.patchpro.util.State.run(State.java:266)
Nov 18 19:03:06 localhost at java.lang.Thread.run(Thread.java:619)Nov 18 19:03:06 localhost root: [ID 702911 user.error] => com.sun.patchpro.util.CachingDownloader@13d28e3 <=Downloader.getResponseCode() : IOExceptionUnconnected sockets not implemented
Nov 18 19:03:06 localhost last message repeated 1 time
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => [email protected] <=UnifiedServerPatchServiceProvider.downloadFile: Unable to create cache downloader.
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => [email protected] <=java.io.IOException: Response code was 500
Nov 18 19:03:06 localhost at com.sun.patchpro.util.CachingDownloader.setSourceURL(CachingDownloader.java:302)
Nov 18 19:03:06 localhost at com.sun.patchpro.util.CachingDownloader.setupCache(CachingDownloader.java:208)
Nov 18 19:03:06 localhost at com.sun.patchpro.util.CachingDownloader.<init>(CachingDownloader.java:187)
Nov 18 19:03:06 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadFile(UnifiedServerPatchServiceProvider.java:1242)
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => [email protected] <= at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadRealizationDetectors(UnifiedServerPatchServiceProvider.java:1029)
Nov 18 19:03:06 localhost at com.sun.patchpro.server.PatchServerProxy.downloadRealizationDetectors(PatchServerProxy.java:174)
Nov 18 19:03:06 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.downloadDetectorsWithPOST(HostAnalyzer.java:1212)
Nov 18 19:03:06 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.downloadDetectors(HostAnalyzer.java:1156)
Nov 18 19:03:06 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.prepare(HostAnalyzer.java:875)
Nov 18 19:03:06 localhost root: [ID 702911 user.error] => [email protected] <= at com.sun.patchpro.analysis.HostAnalyzer.downloadDetectors(HostAnalyzer.java:299)
Nov 18 19:03:06 localhost at com.sun.patchpro.model.PatchProModel.downloadDetectors(PatchProModel.java:1776)
Nov 18 19:03:06 localhost at com.sun.patchpro.model.PatchProStateMachine$4.run(PatchProStateMachine.java:245)
Nov 18 19:03:06 localhost at com.sun.patchpro.util.State.run(State.java:266)
Nov 18 19:03:06 localhost at java.lang.Thread.run(Thread.java:619)Nov 18 19:03:07 localhost root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@11ca803 <=com.sun.patchpro.model.PatchProException: Response code was 500
Nov 18 19:03:07 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadFile(UnifiedServerPatchServiceProvider.java:1267)
Nov 18 19:03:07 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadRealizationDetectors(UnifiedServerPatchServiceProvider.java:1029)
Nov 18 19:03:07 localhost at com.sun.patchpro.server.PatchServerProxy.downloadRealizationDetectors(PatchServerProxy.java:174)
Nov 18 19:03:07 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.downloadDetectorsWithPOST(HostAnalyzer.java:1212)
Nov 18 19:03:07 localhost root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@11ca803 <= at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.downloadDetectors(HostAnalyzer.java:1156)
Nov 18 19:03:07 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.prepare(HostAnalyzer.java:875)
Nov 18 19:03:07 localhost at com.sun.patchpro.analysis.HostAnalyzer.downloadDetectors(HostAnalyzer.java:299)
Nov 18 19:03:07 localhost at com.sun.patchpro.model.PatchProModel.downloadDetectors(PatchProModel.java:1776)
Nov 18 19:03:07 localhost at com.sun.patchpro.model.PatchProStateMachine$4.run(PatchProStateMachine.java:245)
Nov 18 19:03:07 localhost root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@11ca803 <= at com.sun.patchpro.util.State.run(State.java:266)
Nov 18 19:03:07 localhost at java.lang.Thread.run(Thread.java:619)Nov 18 19:03:07 localhost Caused by:
Nov 18 19:03:07 localhost java.io.IOException: Response code was 500
Nov 18 19:03:07 localhost at com.sun.patchpro.util.CachingDownloader.setSourceURL(CachingDownloader.java:302)
Nov 18 19:03:07 localhost root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@11ca803 <= at com.sun.patchpro.util.CachingDownloader.setupCache(CachingDownloader.java:208)
Nov 18 19:03:07 localhost at com.sun.patchpro.util.CachingDownloader.<init>(CachingDownloader.java:187)
Nov 18 19:03:07 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadFile(UnifiedServerPatchServiceProvider.java:1242)
Nov 18 19:03:07 localhost at com.sun.patchpro.server.UnifiedServerPatchServiceProvider.downloadRealizationDetectors(UnifiedServerPatchServiceProvider.java:1029)
Nov 18 19:03:07 localhost at com.sun.patchpro.server.PatchServerProxy.downloadRealizationDetectors(PatchServerProxy.java:174)
Nov 18 19:03:07 localhost root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@11ca803 <= at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.downloadDetectorsWithPOST(HostAnalyzer.java:1212)
Nov 18 19:03:07 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.downloadDetectors(HostAnalyzer.java:1156)
Nov 18 19:03:07 localhost at com.sun.patchpro.analysis.HostAnalyzer$RealizationSetAuto.prepare(HostAnalyzer.java:875)
Nov 18 19:03:07 localhost at com.sun.patchpro.analysis.HostAnalyzer.downloadDetectors(HostAnalyzer.java:299)
Nov 18 19:03:07 localhost at com.sun.patchpro.model.PatchProModel.downloadDetectors(PatchProModel.java:1776)
Nov 18 19:03:07 localhost root: [ID 702911 user.crit] => com.sun.patchpro.cli.PatchServices@11ca803 <=null at com.sun.patchpro.model.PatchProStateMachine$4.run(PatchProStateMachine.java:245)
Nov 18 19:03:07 localhost at com.sun.patchpro.util.State.run(State.java:266)
Nov 18 19:03:07 localhost at java.lang.Thread.run(Thread.java:619)#Any idea ?
Many thanks in advance !You may be interested to know that there is a forum specifically for problems with smpatch, updatemanager and the Sun UC Proxy (aka LPS) - [Administration Tools - Sun Update Connection-System / Hosted, Patch Manager & PatchPro Forum|http://forums.sun.com/forum.jspa?forumID=871]
This problem is being tracked in Bug ID: #6771432
It affects Java 6 Update 10, 11, and 12. The fix should be released in Update 14, in the mean time you can use the workaround from the bug:
Edit the following lines:
/usr/sbin/pprosvc: JAVACMD="/usr/jdk/latest/bin/java -version:1.5+"
/usr/bin/updatemanager: JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5+"And change them to:
/usr/sbin/pprosvc: JAVACMD="/usr/jdk/latest/bin/java -version:1.5*"
/usr/bin/updatemanager: JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5*"The difference between the commands is that the '+' means any version of Java that is equal to or greater than 1.5, the '*' means it must be Java 1.5 but it will accept any minor version.
As far as we are aware this has not been seen with any version of Java 5 (1.5.0_xx) -
Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
PS. Reposted, because I submitted my query in the wrong forum.
Add the line below, to */etc/inittab* file.
ip:1234:once:/full/path/to/scriptEdited by: mysol on Aug 4, 2009 4:12 PM
Edited by: mysol on Aug 4, 2009 4:15 PMWhat do you mean by auto login?
Do you want to implement Integrated windows authentication in OIM Design console. If yes, then I don't think it's possible.
Post your requirement here so that ppl can help you out. -
Hi,
I have this problem today.I am using Oracle 8.1.7 on Solaris 2.8
A Oracle user say " SCOTT" trying to change his password but could not.. he gets the followling message
SQL> alter user scott identified by abc123;
alter user scott identified by abc123
ERROR at line 1:
ORA-28003: password verification for the specified password failed
Scott's profile has password_verfiy function. Hence i thought abc123 password was not matching with the password verify condition. Surprisingly, what ever password SCOTT tries with, he could get the same error message and could not change his password.. Ultimatly SCOTT could never change his password. How is it possible ??
It is noteworthy to mention that if i give DBA role to SOCTT then he can change his password with abc123 or any thing that satisfies with password verification function.
Now Only a user who has DBA role or a DBA could change passwords..
Can somebody through some light on it and explain what corrective action to be taken so that Users can change their password without DBA's interreption.
Thanks in advance
Regards
Srini<PRE>
This is the description of the error message:
=============================================================================
ORA-28003 password verification for the specified password failed
Cause: The new password did not meet the necessary complexity specifications
and the PASSWORD_VERIFY_FUNCTION failed.
Action: Enter a different password. Contact the database administrator to find
out the rules for choosing the new password.
=============================================================================
it clearly says that password has to match the complexity specifications. You will not be able
to change password without meeting the complexity requirements.
DBA's can make the change to the password because if DBA's can not change the password, it could lock
you out of the database (all users including the DBA's) and you will not be able to access the
database.
Try removing the password verify function and see if you can then change the password succssfully.
</PRE>
hi Prakash,
The verify password function is standard oracle function and I do not think the current problem is any way related to the rules that were framed in verify password function. The key point here is a user could not change his own password. But a DBA or a user who has ALTER USER system privs.. can do so..
Regards
Srini -
How to auto login in Solaris 10
Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
P.S. Just noticed I might have posted in the wrong forum. Sorry !
Which forum should I post again ?
Edited by: mysol on Jul 20, 2009 10:44 AMZFS has not yet been integrated into Solaris 10...
At this time you need either the "Software Express for Solaris 2/06"
( http://www.sun.com/software/solaris/solaris-express/ ) or the
"Solaris Express: Community Release"
( http://www.opensolaris.org/os/downloads/on/ ) to play with ZFS.
. -
WLS 8.1.5 console doesn't show ActiveDirectory (or custom) Users/Groups
We currently have numerous apps running on a weblogic 8.1.4 portal domain. I am attempting to replicate this domain on 8.1.5. There are four authenticators on our old domain: a DefaultAuthenticator, an ActiveDirectoryAuthenticator, and two Custom Authenticators (based on the sample database authenticator), with JAAS flags set to OPTIONAL for all. Everything was working properly under sp4, including user/group/membership listings in console and authentication. Under sp5, while simple authentication seems to work with all providers, the user/group/membership listings in weblogic console have bad HTML (empty rows under any default authenticator users/groups). The active directory settings were migrated wholesale and I verified that authentication works against this provider. Just no usernames or groupnames. I tested with just ActiveDirectory and DefaultAuthenticator, DefaultIdentityAsserter.
<p>
I was able to debug a bit more using our custom authenticators. I have verified that the user and group lists are being requested and returned properly when you click on Manage Users or Manage Groups in weblogic 8.1.5 console. It just seems like somewhere in the console there is a problem and the HTML output is garbled. Here is a sample of my debug text, the method names and classes should be immediately familiar from the sample authenticator:
<p>
getUserLoginNamesMatching(*,50)<br>
loginNames=[BF, DAD, NA, OTN, P1Adm1, P1User1, P2Adm1, P2User1, S, ab, admtest, gw, jb, joeschmo, kw, mf, mh, pa, rn, rt, super, test1, wf]<br>
Success: listUsers(userNameWildcard = *, maximumToReturn = 2147483647) = Cursor0<br>
Success: haveCurrent(Cursor = Cursor0) = true<br>
Success: getCurrentName(Cursor = Cursor0) = BF<br>
Success: advance(Cursor = Cursor0)<br>
Success: haveCurrent(Cursor = Cursor0) = true<br>
Success: getCurrentName(Cursor = Cursor0) = DAD<br>
Success: advance(Cursor = Cursor0)<br>
Success: close(Cursor = Cursor0)<br>
getExistingUser(BF)<br>
user=new UserEntry( BF, BF , BF, [PDA, ADM], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
Success: getUserDescription(user = BF) = BF<br>
getExistingUser(DAD)<br>
Success: haveCurrent(Cursor = Cursor0) = false<br>
Success: close(Cursor = Cursor0)<br>
getExistingUser(BF)<br>
user=new UserEntry( BF, BF , BF, [PDA, ADM], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
Success: getUserDescription(user = BF) = BF<br>
getExistingUser(DAD)<br>
user=new UserEntry( DAD, Dummy Alcanto Demoer, LYNX, [PDA], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
Success: getUserDescription(user = DAD) = Dummy Alcanto Demoer<br>
getExistingUser(NA)<br>
user=new UserEntry( NA, Nancy Aarons, 1234, [PDA, ADM], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
Success: getUserDescription(user = NA) = Nancy Aarons<br>
---- weblogic console output sp4, Manage Users ----
User Description Provider <br>
portaladmin Admin for portal domain DefaultAuthenticator <br>
weblogic This user is the default administrator. DefaultAuthenticator <br>
yahooadmin Admin for yahoo content DefaultAuthenticator <br>
john John Smith DefaultAuthenticator <br>
qamean ActiveDirectoryAuthenticator <br>
qamin ActiveDirectoryAuthenticator <br>
---- weblogic console output sp5, Manage Users ----
User Description Provider <br>
portaladmin Admin for portal domain DefaultAuthenticator
weblogic This user is the default administrator. DefaultAuthenticator <br>
yahooadmin Admin for yahoo content DefaultAuthenticator <br>
--- html for above (with weird empty rows) ---
<FORM NAME=FilterUsers METHOD=POST ACTION=><P>Filter By:Â <INPUT TYPE=text NAME=filter SIZE=10>Â <INPUT CLASS='buttons' TYPE=submit VALUE=Filter></FORM><b>Displayed 68 of 357 Total, use filter to narrow your search results.<b><table border='1' cellpadding='4' cellspacing='0' height='20'><tr bgcolor='#b8cece'><th>User</th><th>Description</th><th>Provider</th><th>Â </th></tr><tr bgcolor='#FFFFFF'><td>portaladmin</td><td>Admin for portal domain</td><td>DefaultAuthenticator</td><td><img border='0' src='http://localhost:7001/console/images/delete.gif' title='Delete'/></td></tr><tr bgcolor='#FFFFFF'><td>weblogic</td><td>This user is the default administrator.</td><td>DefaultAuthenticator</td><td><img border='0' src='http://localhost:7001/console/images/delete.gif' title='Delete'/></td></tr><tr bgcolor='#FFFFFF'><td>yahooadmin</td><td>Admin for yahoo content</td><td>DefaultAuthenticator</td><td><img border='0' src='http://localhost:7001/console/images/delete.gif' title='Delete'/></td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr></table>
Message was edited by:
srhutch444i have reinstalled solaris and the problem continues.
Under Solaris Management Console groups and users doesn't run ok. Editing an user i can't see groups and editing groups i can't see its users...very very extrange.
A bug?
I don't know what is happening :(
Maybe you are looking for
-
Sending and receivind ADC coefficients from/to soundcard in VBA for Excel 2010
How to send and receive ADC coefficients from/to soundcard(mixer,microphone) in VBA for Excel 2010 (noncom. edition, x64) to Excel macros for DFT (from IDFT), IIR , user defined samples parser (special noise generator, graphic s(t),S(jw),
-
Rollup and Display Non Existing Rows
This query produces the results except that I would like to have a final total and overal average (excluding the "No GPA"). Shown as XXX in the output sample. Can this be done in one query or do I need to union for the summary? Additionally, if possi
-
Where to learn how to create a "virtual book"
I'm a writer looking to design a webpage so that the content looks like it is inside a regular book that you would "flip" through...is there a specific tutorial i should use for this? Anyone have any tips?
-
Graph in smartform/SAPscript
Hello, Is it possible to print graph in smartform or sap script? If yes, can anybody giude me how to do that? Thanks & Regards,,, Sunil Joyous
-
I would like to change "Windows" to "Windows HD" on boot screen (option key). How can I do that? I would like to have the following names on boot screen: OS X Lion HD Windows HD Recovery HD Thanks in Advance