Solaris 10 update 9 - live upgrade issues with ZFS

Hi
After doing a live upgrade from Solaris 10 update 8 to Solaris 10 update 9 the alternate boot environment I created is no longer bootable.
I have completed all the pre-upgrade steps like:
- Installing the latest version of live upgrade from the update 9 ISO.
- Create and test the new boot environment.
- Create a sysidcfg file used by the live upgrade that has auto_reg=disable in it.
There is also no errors while creating the boot environment or even when activating it.
Here is the error I get:
SunOS Release 5.10 Version Generic_14489-06 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
NOTICE: zfs_parse_bootfs: error 22
Cannot mount root on altroot/37 fstype zfs
*panic[cpu0]/thread=fffffffffbc28040: vfs mountroot: cannot mount root*
ffffffffffbc4a8d0 genunix:main+107 ()
Skipping system dump - no dump device configured
Does anyone know how I can fix this?
Edited by: user12099270 on 02-Feb-2011 04:49

Found the culprit... *142910-17*... breaks it
System has findroot enabled GRUB
Updating GRUB menu default setting
GRUB menu default setting is unaffected
Saving existing file </boot/grub/menu.lst> in top level dataset for BE <s10x_u8wos_08a> as <mount-point>//boot/grub/menu.lst.prev.
File </etc/lu/GRUB_backup_menu> propagation successful
Successfully deleted entry from GRUB menu
Validating the contents of the media </admin/x86/Patches/10_x86_Recommended/patches>.
The media contains 204 software patches that can be added.
Mounting the BE <s10x_u8wos_08a_Jan2011>.
Adding patches to the BE <s10x_u8wos_08a_Jan2011>.
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SUNWio-tools from directory SUNWio-tools in patch 142910-17 is not installed on the system. Changes for package SUNWio-tools will not be applied to the system.
Package SUNWzoneu from directory SUNWzoneu in patch 142910-17 is not installed on the system. Changes for package SUNWzoneu will not be applied to the system.
Package SUNWpsm-ipp from directory SUNWpsm-ipp in patch 142910-17 is not installed on the system. Changes for package SUNWpsm-ipp will not be applied to the system.
Package SUNWsshdu from directory SUNWsshdu in patch 142910-17 is not installed on the system. Changes for package SUNWsshdu will not be applied to the system.
Package SUNWsacom from directory SUNWsacom in patch 142910-17 is not installed on the system. Changes for package SUNWsacom will not be applied to the system.
Package SUNWmdbr from directory SUNWmdbr in patch 142910-17 is not installed on the system. Changes for package SUNWmdbr will not be applied to the system.
Package SUNWopenssl-commands from directory SUNWopenssl-commands in patch 142910-17 is not installed on the system. Changes for package SUNWopenssl-commands will not be applied to the system.
Package SUNWsshdr from directory SUNWsshdr in patch 142910-17 is not installed on the system. Changes for package SUNWsshdr will not be applied to the system.
Package SUNWsshcu from directory SUNWsshcu in patch 142910-17 is not installed on the system. Changes for package SUNWsshcu will not be applied to the system.
Package SUNWsshu from directory SUNWsshu in patch 142910-17 is not installed on the system. Changes for package SUNWsshu will not be applied to the system.
Package SUNWgrubS from directory SUNWgrubS in patch 142910-17 is not installed on the system. Changes for package SUNWgrubS will not be applied to the system.
Package SUNWzoner from directory SUNWzoner in patch 142910-17 is not installed on the system. Changes for package SUNWzoner will not be applied to the system.
Package SUNWmdb from directory SUNWmdb in patch 142910-17 is not installed on the system. Changes for package SUNWmdb will not be applied to the system.
Package SUNWpool from directory SUNWpool in patch 142910-17 is not installed on the system. Changes for package SUNWpool will not be applied to the system.
Package SUNWudfr from directory SUNWudfr in patch 142910-17 is not installed on the system. Changes for package SUNWudfr will not be applied to the system.
Package SUNWxcu4 from directory SUNWxcu4 in patch 142910-17 is not installed on the system. Changes for package SUNWxcu4 will not be applied to the system.
Package SUNWarc from directory SUNWarc in patch 142910-17 is not installed on the system. Changes for package SUNWarc will not be applied to the system.
Package SUNWtftp from directory SUNWtftp in patch 142910-17 is not installed on the system. Changes for package SUNWtftp will not be applied to the system.
Package SUNWaccu from directory SUNWaccu in patch 142910-17 is not installed on the system. Changes for package SUNWaccu will not be applied to the system.
Package SUNWppm from directory SUNWppm in patch 142910-17 is not installed on the system. Changes for package SUNWppm will not be applied to the system.
Package SUNWtoo from directory SUNWtoo in patch 142910-17 is not installed on the system. Changes for package SUNWtoo will not be applied to the system.
Package SUNWcpc from directory SUNWcpc.i in patch 142910-17 is not installed on the system. Changes for package SUNWcpc will not be applied to the system.
Package SUNWftdur from directory SUNWftdur in patch 142910-17 is not installed on the system. Changes for package SUNWftdur will not be applied to the system.
Package SUNWypr from directory SUNWypr in patch 142910-17 is not installed on the system. Changes for package SUNWypr will not be applied to the system.
Package SUNWlxr from directory SUNWlxr in patch 142910-17 is not installed on the system. Changes for package SUNWlxr will not be applied to the system.
Package SUNWdcar from directory SUNWdcar in patch 142910-17 is not installed on the system. Changes for package SUNWdcar will not be applied to the system.
Package SUNWnfssu from directory SUNWnfssu in patch 142910-17 is not installed on the system. Changes for package SUNWnfssu will not be applied to the system.
Package SUNWpcmem from directory SUNWpcmem in patch 142910-17 is not installed on the system. Changes for package SUNWpcmem will not be applied to the system.
Package SUNWlxu from directory SUNWlxu in patch 142910-17 is not installed on the system. Changes for package SUNWlxu will not be applied to the system.
Package SUNWxcu6 from directory SUNWxcu6 in patch 142910-17 is not installed on the system. Changes for package SUNWxcu6 will not be applied to the system.
Package SUNWpcmci from directory SUNWpcmci in patch 142910-17 is not installed on the system. Changes for package SUNWpcmci will not be applied to the system.
Package SUNWarcr from directory SUNWarcr in patch 142910-17 is not installed on the system. Changes for package SUNWarcr will not be applied to the system.
Package SUNWscpu from directory SUNWscpu in patch 142910-17 is not installed on the system. Changes for package SUNWscpu will not be applied to the system.
Package SUNWcpcu from directory SUNWcpcu in patch 142910-17 is not installed on the system. Changes for package SUNWcpcu will not be applied to the system.
Package SUNWopenssl-include from directory SUNWopenssl-include in patch 142910-17 is not installed on the system. Changes for package SUNWopenssl-include will not be applied to the system.
Package SUNWdtrp from directory SUNWdtrp in patch 142910-17 is not installed on the system. Changes for package SUNWdtrp will not be applied to the system.
Package SUNWhermon from directory SUNWhermon in patch 142910-17 is not installed on the system. Changes for package SUNWhermon will not be applied to the system.
Package SUNWpsm-lpd from directory SUNWpsm-lpd in patch 142910-17 is not installed on the system. Changes for package SUNWpsm-lpd will not be applied to the system.
Package SUNWdtrc from directory SUNWdtrc in patch 142910-17 is not installed on the system. Changes for package SUNWdtrc will not be applied to the system.
Package SUNWhea from directory SUNWhea in patch 142910-17 is not installed on the system. Changes for package SUNWhea will not be applied to the system.
Package SUNW1394 from directory SUNW1394 in patch 142910-17 is not installed on the system. Changes for package SUNW1394 will not be applied to the system.
Package SUNWrds from directory SUNWrds in patch 142910-17 is not installed on the system. Changes for package SUNWrds will not be applied to the system.
Package SUNWnfsskr from directory SUNWnfsskr in patch 142910-17 is not installed on the system. Changes for package SUNWnfsskr will not be applied to the system.
Package SUNWudf from directory SUNWudf in patch 142910-17 is not installed on the system. Changes for package SUNWudf will not be applied to the system.
Package SUNWixgb from directory SUNWixgb in patch 142910-17 is not installed on the system. Changes for package SUNWixgb will not be applied to the system.
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
142910-17
Checking installed patches...
Executing prepatch script...
Installing patch packages...
Patch 142910-17 has been successfully installed.
See /a/var/sadm/patch/142910-17/log for details
Executing postpatch script...
Creating GRUB menu in /a
Installing grub on /dev/rdsk/c2t0d0s0
stage1 written to partition 0 sector 0 (abs 16065)
stage2 written to partition 0, 273 sectors starting at 50 (abs 16115)
Patch packages installed:
BRCMbnx
SUNWaac
SUNWahci
SUNWamd8111s
SUNWcakr
SUNWckr
SUNWcry
SUNWcryr
SUNWcsd
SUNWcsl
SUNWcslr
SUNWcsr
SUNWcsu
SUNWesu
SUNWfmd
SUNWfmdr
SUNWgrub
SUNWhxge
SUNWib
SUNWigb
SUNWintgige
SUNWipoib
SUNWixgbe
SUNWmdr
SUNWmegasas
SUNWmptsas
SUNWmrsas
SUNWmv88sx
SUNWnfsckr
SUNWnfscr
SUNWnfscu
SUNWnge
SUNWnisu
SUNWntxn
SUNWnv-sata
SUNWnxge
SUNWopenssl-libraries
SUNWos86r
SUNWpapi
SUNWpcu
SUNWpiclu
SUNWpsdcr
SUNWpsdir
SUNWpsu
SUNWrge
SUNWrpcib
SUNWrsgk
SUNWses
SUNWsmapi
SUNWsndmr
SUNWsndmu
SUNWtavor
SUNWudapltu
SUNWusb
SUNWxge
SUNWxvmpv
SUNWzfskr
SUNWzfsr
SUNWzfsu
PBE GRUB has no capability information.
PBE GRUB has no versioning information.
ABE GRUB is newer than PBE GRUB. Updating GRUB.
GRUB update was successfull.
Unmounting the BE <s10x_u8wos_08a_Jan2011>.
The patch add to the BE <s10x_u8wos_08a_Jan2011> completed.
Still need to know how to resolve it though...

Similar Messages

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Solaris 10 Live Upgrade with Veritas Volume Manager 4.1

What is the latest version of Live Upgrade?
I need to upgrade our systems from Solaris 8 to Solaris 10. All our systems have Veritas VxVM 4.1, with the O.S disks encapsulated and mirrored.
Whats the best way to do the Live Upgrade. Anyone have clean documents for the same ?

There are more things that you need to do.
Read veritas install guide -- it has a pretty good section of what needs to be done.
http://www.sun.com/products-n-solutions/hardware/docs/Software/Storage_Software/VERITAS_Volume_Manager/

Solaris 10 live upgrade failed

I am trying to upgrade Solaris 10 U6 10/08 to U7 05/09 with live upgrade. But it failed with following errors:
# luupgrade -u -n solaris_u7 -s /mnt/cdrom
No entry for BE <solaris_u7> in GRUB menu
Copying failsafe kernel from media.
Uncompressing miniroot
Creating miniroot device
miniroot filesystem is <ufs>
Mounting miniroot at </mnt/cdrom/Solaris_10/Tools/Boot>
Validating the contents of the media </mnt/cdrom>.
The media is a standard Solaris media.
The media contains an operating system upgrade image.
The media contains <Solaris> version <10>.
Constructing upgrade profile to use.
Locating the operating system upgrade program.
Checking for existence of previously scheduled Live Upgrade requests.
Creating upgrade profile for BE <solaris_u7>.
Checking for GRUB menu on ABE <solaris_u7>.
Saving GRUB menu on ABE <solaris_u7>.
Checking for x86 boot partition on ABE.
Determining packages to install or upgrade for BE <solaris_u7>.
Performing the operating system upgrade of the BE <solaris_u7>.
CAUTION: Interrupting this process may leave the boot environment unstable
or unbootable.
ERROR: Installation of the packages from this media of the media failed; pfinstall returned these diagnostics:
Processing profile
Loading local environment and services
Generating upgrade actions
WARNING: SUNWwgetu depends on SUNWgcmn, which is not selected
WARNING: SUNWi15cs depends on SUNWi15rf, which is not selected
WARNING: SUNWi1cs depends on SUNWxwplt, which is not selected
WARNING: SUNWbind depends on SUNWbindr, which is not selected
WARNING: SUNWale depends on SUNWxwrtl, which is not selected
WARNING: SUNWale depends on SUNWxwplt, which is not selected
ERROR: No upgradeable file systems found at specified mount point.
Restoring GRUB menu on ABE <solaris_u7>.
ABE boot partition backing deleted.
PBE GRUB has no capability information.
PBE GRUB has no versioning information.
ABE GRUB is newer than PBE GRUB. Updating GRUB.
GRUB update was successfull.
Did it really fail due to file dependencies? Will it fix the problem by installing the missing packages on the running BE?

You need to run this script from the CD or Install server: Solaris_10/Tools/Installers/liveupgrade20 when upgrading to 10 u7. I had run into this. Run the script and choose all the defaults. Liveupgrade will then not give the errors you have seen.
Linuxbass :-)

7.1.2 Upgrade Issue with 2012 Chevrolet Tahoe

I upgraded my iPhone 5 to iOS 7.1.2 and now it will not work with my 2012 Tahoe via USB connection. Vehicle has Bose system with navigation. Previously the display worked with Spotify and any music apps on the phone. Phone has been rebooted mutiple times. Vehicle has also been turned off and on.
The strange thing is I also updated to 7.1.2 on my iPad Mini (non retina) and it connects and works as it should.

Hey ylwdogsc,
I have an article that may help you address this issue and contains some helpful troubleshooting tips for this type of issue:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Troubleshooting tips
Beginning playback and controlling music
Some car stereos may require that playback be started or controlled from either the device or the stereo. Ensure that your car stereo is set to the proper input for your device. If it is and you cannot hear sound from your car speakers, try switching to your radio and then back to the proper input.
When using adapters to connect to your car stereo, you may notice variations in audio quality. When possible, use a shorter connection to the car stereo or try a different cable or adapter.
Disconnect and restart
If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
Isolate the issue
Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
Example: If you hear static coming from the left audio channel, try connecting a different device or try connecting to a different stereo or accessory that connects over the same interface (30-pin or Lightning connector, Bluetooth, or headphone jack).
Restore iPhone, iPad, or iPod touch
If you have isolated an issue to the device, restore iPhone, iPad, or iPod touch to its factory condition. You should rarely need to use this step with an accessory issue. If the issue affects only a third-party accessory, contact the accessory manufacturer before restoring your iOS device.
If the device does not update successfully, the issue may lie with the device and not with the accessory. See one of the following articles, depending on your device:
iPhone
iPad
iPod touch
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Live upgrade only for zfs root?

Only live upgrade for zfs root on 5/09? Is this true? I have tried to do live upgrades previously and have had no luck. Particularly on my old blade1000 with an 18gb drive.

Reading over this post I see it is a little unclear. I am trying to upgrade a u6 installation that has a zfs root to u7.

Solars 10 Live upgrade

Hi All
I am trying to live upgrade Solaris 8 to soalris10. While creating BE is it required that we create /usr file system, because I am giving 10 GB to / and I don�t want to create /usr file system ,but the lu command CLI doesn�t allow me to save without specifying space for /usr. Please help me as I have only 2gb for /usr and it failed due to lack of space/
Thanks.
Mohammed Sadiq

You'll have to tell LU to "roll /usr into / -- the term used is -- merging filesystems".
In other words, you are relocating the "/usr" filesystem into the "/" filesystem. There's a switch in lucreate that does that:
    Example 10: Merging File Systems
     The command below merges the /usr/opt file system into the
     /usr file system. First, here are the disk slices in the BE
     first_disk, expressed in the format used for arguments to
     the -m option:
     /:/dev/dsk/c0t4d0s0:ufs
     /usr:/dev/dsk/c0t4d0s1:ufs
     /usr/opt:/dev/dsk/c0t4d0s3:ufs
     The following command creates a BE second_disk and performs
     the merge operation, merging /usr/opt with its parent, /usr.
     # lucreate -m /:/dev/dsk/c0t4d0s0:ufs -m /usr:/dev/dsk/c0t4d0s1:ufs \
     -m /usr/opt:merged:ufs -n second_disk

Live Stream Issues with FP 11.2

We're seeing lots of bugs within the NetStream when connecting live streams and publishing/playing the stream via direct peer connections.
Specifically when attaching a new Camera the receiving peer can no longer see the video stream. Also when toggling publish(bull) publish(streamName) from the publisher side and similarly toggling play(null) and play(streamName) from the subscriber side the streams don't play (render video) anymore even though i can see through the netwrok that the bytes are coming through.
Along with this we seem to be getting new kinds of NetStatus errors ever since we started testing - "NetConnection.Call.BadVersion" was one we've seen but can't make any sense out of given we're using DIRECT peer to peer connections for the netstream classes.
Lastly on general we're seeing lots of instability issues with on the h264settings applied to the nestream is this still in BETA? Instibility = crashing browser mostly when showing multiple video such as in a group video chat.
Are any of you seeing this as well?

Hi Damorgan,
As you suggested, I did fresh 11.2.0.2 installation and find the mentioned components are valid from v$registry.
Only desupported component is UltraSearch that I was asked to remove during upgrade and I did so.
COMP_NAME VERSION STATUS
OLAP Catalog 11.2.0.2.0 VALID
Spatia 11.2.0.2.0 VALID
OLAP Analytic Workspace 11.2.0.2.0 VALID
Also the metalink note: ID 270588.1 indicates that mentioned components exists for 11gR2.
DBUA was asking to install these component prior upgrading. My first note has that DBUA instruction.
Is there any way to select mentioned components with "software only" installation prior upgrading?
Thanks.

HT5306 I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? compatibility issues with wh

Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?

Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

More Major Issues with ZFS + Dedup

I'm having more problems - this time, very, very serious ones, with ZFS and deduplication. Deduplication is basically making my iSCSI targets completely inaccessible to the clients trying to access them over COMSTAR. I have two commands right now that are completely hung:
1) zfs destroy pool/volume
2) zfs set dedup=off pool
The first command I started four hours ago, and it has barely removed 10G of the 50G that were allocated to that volume. It also seems to periodically cause the ZFS system to stop responding to any other I/O requests, which in turn causes major issues on my iSCSI clients. I cannot kill or pause the destroy command, and I've tried renicing it, to no avail. If anyone has any hints or suggestions on what I can do to overcome this issue, I'd very much appreciate that. I'm open to suggestions that will kill the destroy command, or will at least reprioritize it such that other I/O requests have precedence over this destroy command.
Thanks,
Nick

To add some more detail, I've been review iostat and zpool iostat for a couple of hours, and am seeing some very, very strange behavior. There seem to be three distinct patterns going on here.
The first is extremely heavy writes. Using zpool iostat, I see write bandwidth in the 15MB/s range sustained for a few minutes. I'm guessing this is when ZFS is allowing normal access to volumes and when it is actually removing some of the data for the volume I tried to destroy. This only lasts for two to three minutes at a time before progressing to the next pattern.
The second pattern is categorized by heavy, heavy read access - several thousand read operations per second, and several MB/s bandwidth. This also lasts for five or ten minutes before proceeding to the third pattern. During this time there is very little, if any write activity.
The third and final pattern is categorized by absolutely no write activity (0s in both the write ops/sec and the write bandwidth columns, and very, very small read activity. By small ready activity, I mean 100-200 read ops per second, and 100-200K read bandwidth per second. This lasts for 30 to 40 minutes, and then the patter proceeds back to the first one.
I have no idea what to make of this, and I'm out of my league in terms of ZFS tools to figure out what's going on. This is extremely frustrating because all of my iSCSI clients are essentially dead right now - this destroy command has completely taken over my ZFS storage, and it seems like all I can do is sit and wait for it to finish, which, as this rate, will be another 12 hours.
Also, during this time, if I look at the plain iostat command, I see that the read ops for the physical disk and the actv are within normal ranges, as are asvc_t and %w. %b, however is pegged at 99-100%.
Edited by: Nick on Jan 4, 2011 10:57 AM

Solaris 9 live upgrade to solaris 10 segmentation fault

pre-upgrade work:
apply patch doc 72099
upgrade live upgrade to solaris 10.
lucreate-m /:/dev/dsk/c0t1d0s0:ufs -m /var:/dev/dsk/c0t1d0s1:ufs -m /opt:/dev/dsk/c0t1d0s3:ufs -n sol10
it works well
oot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol9 yes yes yes no -
sol10 yes no no yes -
But luupgrade -u -n sol10 -s /sol11
Validating the contents of the media </sol11>.
The media is a standard Solaris media.
The media contains an operating system upgrade image.
The media contains <Solaris> version <11>.
Constructing upgrade profile to use.
Locating the operating system upgrade program.
Checking for existence of previously scheduled Live Upgrade requests.
Creating upgrade profile for BE <sol10>.
Determining packages to install or upgrade for BE <sol10>.
Performing the operating system upgrade of the BE <sol10>.
CAUTION: Interrupting this process may leave the boot environment unstable
or unbootable.
/usr/sbin/luupgrade[677]: 6549 Segmentation Fault(coredump)
ERROR: Installation of the packages from this media of the media failed; pfinstall returned these diagnostics:
The Solaris upgrade of the boot environment <sol10> failed.

I would break your mirror and do a liveupgrade on the available mirror. Then boot that disk.

JRE 6 Update 31 upgrade issue

Hello,
My company uses a database application which is dependent on Java to run Stored Procedures and like from the Database Server. However, when our customers install Java 6 Update 31, the RT.jar file is removed after the restart at the end. When I test all other Java installers they create an RTA#####.pack file, which when restarted, will then become the new RT.jar. Update 31 does not seem to do this. I have taken a video to show this particular problem in its fullest. The starting scenario is Windows 7 32bit with Java 6 Update 26. Our software is installed and working with no issues. (Our Support dept says this is only happening for Windows 7 clients, but this is unconfirmed yet)
http://www.youtube.com/watch?v=6pw2093c2Ro
In order to correct this we either have to:
1. At the time of Install, copy the updated RT.jar and restore it after reboot.
2. Uninstall and Reinstall java.
3. Stop our Database Service, perform the update, Start our Database service.
*This only happens when our database service (cTree Ace Server) is running at the time of installation. This only happens with Update 31. All prior Java updates install without error or interruption of Database Service.
Is there an open known ticket for this?
I found the following article which describes this issue perfectly, but it shows resolved since Update 10.
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6681922
Edited by: 917631 on Feb 28, 2012 10:42 AM

I am experiencing the same issue with all versions of the Java updater. Well, actually I only tested the updaters after .25. But the issue exists with them as well. Run the Java updater which says a reboot is required. After the reboot some of the Java files are missing and Java does not work. Have to uninstall Java and reinstall.
Ben

Updated to Mavericks Issues with Formatting

Recently updated to Mavericks and Pages will not allow me to use keyboard commands in formatting and in fact doesn't allow me to bold, italicize or underline before typing even when clicking the button beforehand. I have to type my text and then go back and highlight and format. Annoying. Is there anyway to fix this?

All known issues with Pages 5 along with at least 60 others.
The only solution for the foreseeable future is to use Pages '09.
Peter

Windows 7 Update Internet Connection Issue with Router

I updated two of four toshiba laptops with Windows 7 and installed Toshiba's wireless adapter driver for Windows 7. The adapter connects to the router and I can access all resources on my home network, however, Internet service is not available on the two laptops with the Windows 7 update. After disconnecting and reconnecting 7-10 times, the Internet Service connection does not drop. The other two laptops and two desktops that are not running Windows 7 do not have this problem. Is there any known issues with lynksys wireless routers and Windows 7?

When your Windows 7 machine is having problems, can it ping the following IP addresses:
127.0.0.1 (local loopback)
192.168.1.x - the DHCP IP address it was issued by the router
192.168.1.254 - your router
8.8.8.8 - Google DNS out on the internet
-- Dan Meyer
http://www.linkedin.com/in/danielrmeyer

Lion Upgrade - issue with WiFi Network

I recently upgraded to Lion and now everytime I restart my wireless network (Time Capsule) is not recongized and I must manually select it. I have the same issue with my magic mouse, although it does reconginze my bluetooth keyboard. What can I do to fix the issue?

Yes, same WiFi problem with safe mode. Everything was perfect until the upgrade to Lollipop. Now WiFi speed is 1/10 of before, and phone is slow in general. realy sad, sometimes even whatsapp messages takes minutes to be delivered.
Does anyone know how to select only 5ghz channel for the WiFi on the phone?

Solaris 10 update 9 - live upgrade issues with ZFS

Similar Messages

Maybe you are looking for