Solaris 10 upgrade fails with "mount failed"

I'm trying to upgrade an aged Ultra 80 to Solaris 10u9 (from Solaris 10u2 or so), so that it can be used for our product testing purposes. After several unsuccessful attempts, I finally freed up enough space on the / filesystem (5.2GB free) by moving /opt to a newly installed second drive.
However, the upgrade now fails with
"Mount failed for either root, swap, or other file system.
Pfinstall failed. Exit stat= java.lang.UNIXProcess@e2892b 2"
At the end of the log file it says
"Checking c0t0d0s0 for an upgradeable Solaris image.
ERROR: Mount failed for either root, swap, or other file system."
I'm stumped. It doesn't say which file system it's having problems with.
Any ideas as to how to troubleshoot this problem, or what the cause might be? At 30 minutes per upgrade attempt, I'd like to know what the cause is rather than pursuing trial and error.
Thanks.

Look at your "vfstab" and see if there are any mounts that need a specific driver like a SAN-provided LUN. Comment them out during the upgrade for the upgrade tries to mount everything in your /etc/vfstab and if it doesn't have the driver/software to do it, it will fail...

Similar Messages

Solaris SPARC upgrade failing

I am trying to apply a Solaris 10 upgrade release to my E450 server, but get the following error during the install process:
"Could not reinitialize system state, please exit installer and try again"
Retrying the upgrade gives the same error.
The current release on the server is 10 1/06 and I am trying to move this on to 10 11/06.
Anyone got any idea what it is complaining about, the upgrade process worked OK on my V480/V490 servers!.

Obviously Sun (excuse me, Oracle) does not intend to support the solaris-10/sparc/firefox-3.6 combination. Firefox 3.6 requires the NPAPI and/or NPRuntime interfaces to java, but oracle does not provide the new "libnpjp2.so" java plugin with the jre-6u18-sparc-solaris java download.
A search at www.oracle.com does not turn up any support announcement about this. You have to learn it the hard way. :(
If you want to continue to use sparc-solaris, downgrade to firefox-3.5 so you can use the old libjavaplugin_oji.so module. Otherwise run Linux or Mac OS X to stay in the unix camp.

First Solaris 11 upgrade fails

Trying to update Solaris 11, it says "unable to clone the current boot environment",
manual creation gives this:
sudo beadm create test
updatevfstab: failed to open vfstab (/tmp/.be.5Saiwr/etc/vfstab): No such file or directory
be_copy: failed to update new BE's vfstab (test)
be_copy: destroying partially created boot environment
Unable to create test.
Unable to find message for error code: 1
cat /etc/vfstab#device          device          mount          FS     fsck     mount     mount
#to mount     to fsck          point          type     pass     at boot     options
/devices     -     /devices     devfs     -     no     -
/proc     -     /proc     proc     -     no     -
ctfs     -     /system/contract     ctfs     -     no     -
objfs     -     /system/object     objfs     -     no     -
sharefs     -     /etc/dfs/sharetab     sharefs     -     no     -
fd     -     /dev/fd     fd     -     no     -
swap     -     /tmp     tmpfs     -     yes     -
rpool/ROOT/release11-1     -     /     zfs     -     no     -
/dev/zvol/dsk/ssd/swap     -     -     swap     -     no     -

Originally it was OpenSolaris, then upgraded to Solaris 11 Express and then to Solaris 11,
beadm list -dsError getting boot configuration from pool rpool: Error while processing the /rpool/boot/grub/menu.lst file([Errno 13] Permission denied: '/rpool/boot/grub/menu.lst')
BE/Dataset/Snapshot Active Mountpoint Space Policy Created
dev-latest-2
rpool/ROOT/dev-latest-2 - - 5.20G static 2010-07-27 15:52
orsol
rpool/ROOT/orsol - - 5.72M static 2011-01-13 14:46
release11
rpool/ROOT/release11 - - 3.65M static 2011-11-17 18:32
release11-1
rpool/ROOT/release11-1 NR / 33.53G static 2011-11-17 18:51
rpool/ROOT/release11-1@2010-09-07-09:32:33 - - 2.22G static 2010-09-07 13:32
rpool/ROOT/release11-1@2011-08-30-11:54:22 - - 1.59G static 2011-08-30 15:54
rpool/ROOT/release11-1@2011-09-26-14:15:49 - - 45.35M static 2011-09-26 18:15
rpool/ROOT/release11-1@2011-10-17-08:30:51 - - 221.18M static 2011-10-17 12:30
rpool/ROOT/release11-1@2011-11-07-10:25:09 - - 287.96M static 2011-11-07 14:25
rpool/ROOT/release11-1@2011-11-17-14:32:46 - - 18.38M static 2011-11-17 18:32
rpool/ROOT/release11-1@2011-11-17-14:51:04 - - 11.81M static 2011-11-17 18:51
rpool/ROOT/release11-1@2011-12-02-09:25:26 - - 410.0K static 2011-12-02 13:25
rpool/ROOT/release11-1@2011-12-02-09:37:22 - - 326.5K static 2011-12-02 13:37
rpool/ROOT/release11-1@2011-12-02-09:40:54 - - 276.0K static 2011-12-02 13:40
rpool/ROOT/release11-1@2011-12-02-09:43:06 - - 229.5K static 2011-12-02 13:43
rpool/ROOT/release11-1@2011-12-02-09:45:16 - - 290.0K static 2011-12-02 13:45
rpool/ROOT/release11-1@2011-12-02-10:03:45 - - 35.0K static 2011-12-02 14:03
rpool/ROOT/release11-1@2011-12-02-10:04:08 - - 35.5K static 2011-12-02 14:04
rpool/ROOT/release11-1@2011-12-02-10:05:40 - - 301.5K static 2011-12-02 14:05
rpool/ROOT/release11-1@2011-12-05-08:46:41 - - 273.0K static 2011-12-05 12:46
rpool/ROOT/release11-1@2011-12-05-08:50:44 - - 279.0K static 2011-12-05 12:50
rpool/ROOT/release11-1@2011-12-05-08:54:36 - - 260.5K static 2011-12-05 12:54
rpool/ROOT/release11-1@2011-12-05-08:57:39 - - 118.5K static 2011-12-05 12:57
rpool/ROOT/release11-1@dev - - 696.84M static 2010-06-24 12:50
rpool/ROOT/release11-1@install - - 2.19G static 2008-09-08 15:45
rpool/ROOT/release11-1@snapshot1 - - 6.07M static 2011-09-09 14:03
rpool/ROOT/release11-1@snapshot2 - - 3.37M static 2011-09-09 15:47
support
rpool/ROOT/support - - 3.28M static 2011-08-30 15:54
support-11
rpool/ROOT/support-11 - - 3.69M static 2011-09-26 18:15
support-12
rpool/ROOT/support-12 - - 5.73M static 2011-10-17 12:30
support-13
rpool/ROOT/support-13 - - 20.76M static 2011-11-07 14:25

Sunscreen upgrade Solaris 2.7 fails

I just rec. my new copy of Solaris 9.
I am attempting to upgrade a previous version of SunScreen
firewall running on Solaris 2.7.
So I kicked off the upgrade script and everything
seemed to be working good. The old Firewall was backed up
and removed. But during the install of the new Sunscreen
packages it failed. The problem is that the upgrade script tried
to install the following package: SUNWhttp as part of the upgrade
process. The problem is it doesn't exist on the CD in the 'sparc' directory.
As a result, the upgrade script terminated with an error complaining that
the package was not found.
Now I have a Solaris 2.7 system with no Firewall and the upgrade will not
continue.
As far as I know, SUNWhttp is not required for SunScreen 3.2 so I think
the upgrade script needs fixing.
Does anyone know of a modified/patched upgrade script that
will allow me to continue the upgrade or at least can someone tell me how best to
proceed? I want to be able to retain my old Sunscreen config.
that was backed up.
I would rather not have to go through the whole install from scratch.
Any help on this would be great.
Thanks.
Ken Kempster.

http://sunsolve.Sun.COM/pub-cgi/show.pl?target=patches/patch-license&nav=pub-patches

RAC Install fails with "OCR upgrade failed with (-1073741819) on 10.2.0

I am trying to install RAC 10.2.0 with two Server 2003 R2 nodes connected to a fiber channel SAN. I have set up the shared storage, created the extended partitions, and setup the unformatted no drive letter volumes. Both servers see the unformatted volumes (and no others do). The preinstallation checks work fine and the installations works fine until the first configuration assistant runs. That would be the "Oracle Clusterware Configuration Assistant". It tries to run crssetup.config.bat and fails on step 3 (configuring OCR Repository) with
ocr upgrade failed with (-1073741819)
If I uninstall clusterware and try again it will not show the OCR and Voting disks as available disks until I delete the volumes and partitions and recreate them. I have run the precheck batch files and they show everything as good as well. When I define the OCR and Voting drives in the clusterware setup I do not select format or assign drive letter. Every time I try to do the install I get the exact same error.
Is there anything I am missing or some trick or patch I may not have done?

Take a look at this notes!!
Note 341214.1 - How To clean up after a Failed Oracle Clusterware Installation on Windows
Note 388730.1 - Oracle RAC Clusterware Installation on Windows Commonly Missed / Misunderstood Prerequisites
Rgrs,
Paulo.

IPhoto library upgrade failed, one third of the photos lost, but the library works as normal. No corruption.

Hello! I recently replaced my tragically crashed Macbook Pro 2008 with a newer model and transferred my volumous iphoto library of 20 000+ photos to my new machine. To be able to use my iphoto '08 library with Aperture I had to upgrade the library in the iphoto '11 version. I left the computer on during the day, and when I got back it seemed to work fine. I browsed my library in Aperture and could see all the thumbnails, but looking closer I noticed a small yellow warning triangle with an arrow in the corner of some pictures. Turns out all pictures from before ~2010 are lost! When I wiev the photos I see nothing but the infinite black of the data void.
Here's how I've tried to fix the problem:
1. Opening the iPhoto Library package in Finder. All the folders for the earlier dates are there, but they are empty. I notice no incorrect or impossible dating, which seemed to be a common problem among users who's libraries where corrupted during the upgrade process.
2. Rebuilding the iphoto library in iphoto. No effect.
3. Recovering the iphoto library from my Time Machine Backup. SInce my old hard drive was just 200 GB, I stored all pictures older than one year on my external hard drive (note that about half of those pictures were successfully imported/upgraded). Both the internal and the external hard drive where backed up using Time Machine on a NAS from Seagate (Black Armor 110, 3TB). I was able to access backed up files on my external drive through Time Machine on my old computer, but since it is now rendered unbootable I tried using Migration Assistant to let my new computer inherit the old backup. However, I could not find the backup of the external drive in Migration Assistant, just my old internal drive. When I tried to access the backup volume on my NAS through Finder it didn't show up (I could find it that way on my old computer).
4. Googling "iPhoto library upgrade failed", or "Inheriting Time Machine backup of external drive", and similarily desperately specific phrases - Nothing useful. Other people seems to have had problems with corrupt Libraries, but I'm not sure that's the case here.
My pictures must exist somewhere on my computer and in a backup on my NAS. I just can't find them! Do anyone have a clue to what may have gone wrong? I'm afraid the computer might have gone to sleep during the upgrade, because I didn't thinkabout adjusting the power saving settings before starting it. But since pictures 1-8000-something are missing, it doesn't seem to have worked properly during the whole beginning of the upgrade, not just during the middle. As I knew I had a backup of the library I didn't worry about upgrading the single functional copy. From now on I will think thrice before doing anything as serious as this.
I am eternally grateful for any answers that might help me recovering my photos!
//Teodor Nilson

b) I split up my photo collection into two iphoto libraries. One for the new photos stored on my internal HD            and one for photos older than one year stored on my external HD
And exactly How did you Split up your iPhoto library?
c) I used Migration Assistant in an attempt to access the Time Machine backup of my old MBP from my new      MBP (by inheriting the backup). When I made my backups, I made sure Time Machine included the external      HD. But Migration Assistant could only find the backup of my Internal HD with the library of new photos!
And again
You should not use Migration assistant on an iPhoto library - it generally does not work
and
     d)   When signing in and mounting the NAS in Finder, I used to be able to see a Time Machine backup      folder/icon. Now I was unable to locate it.
I believe you are using your NAS for your Time Machine backup. If your Time Machine backup and/or your iPhoto library is on a NAS you will have problems - both need to be on Mac formatted volumes - the least troublsome is a volume formatted Mac OS extended (journaled)
http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US
Manually preparing a new disk for Time Machine
If you want to erase a disk before using it with Time Machine, follow these steps:
Open Disk Utility (located in the Utilities folder).
Connect the disk if it isn't already attached.
In the left side of the Disk Utility window, select the disk you want to use with Time Machine.
Optional: If you want to partition the disk, click the Partition tab and select a layout. Make sure "Mac OS Extended (Journaled)" is selected in the Format menu for the partition that will be used for backups. Click Apply.
Click the Erase tab.
Optional: If you want to securely erase the disk, click Security Options to configure, then click OK.
Click Erase.
After erasing, open Time Machine preferences in System Preferences and configure as described in the section above.
Are the iPhoto libraries kept on an external drive formated Mac OS extended (journaled)? Or are they on the NAS? - If you are using the NAS for iPhoto and/or Time Machine that is the source of your problems
LN

Upgrade Solaris 8 to Solaris 10 (Jan 2006) with METASTAT

Hi..
On a v240 server running Solaris 8, I attempted many times to upgrade to Solaris 10 using the Jan 2006 Cd's. However. because a 3310 disk array that was striped, then mirrored using METASTAT and no spare blank disk...all upgrade attempts failed. I had a case open with Sun Support for quite a while and the work around was to unplug the array (containing Oracle 9i databases and 11i Oracle Apps) then do a fresh install of Sol 10, then reconfigure the metastat exactly the same as previously under Solaris 8 so that the databases and applications would become visible again.
So upgrading to Sol 10 from 8 was not simply and easy as one might think (and the marketing hype indicated). Also, I thought the new zfx file system as included with the Jan 2006 release, but sadly, it was not. So there is probably another upgrade from ufs to zfx that will not work because the Solaris 10 upgrade has difficulty with Sun's METASTAT software.
So I wonder out there...is there anyone else that had a similar issue, or solved it easily? And Sol 10 with zfx was to be release in June 2006 sometime...and June is disappearing fast...so any recent update to it?
Roger Sager
Sydney, Aus

Without the case and an explorer we can't comment much on this, but I have seen it before that this behavior is normal when people only patch the software and forget about the hardware connected or firmware. But again that is guessing. Also SVM was changed with the Solaris 9 release.
And for ZFS, its was not part of the release of sol10 1/06 as described in the release notes. Solaris 10 Update 2 is still on the testbed as far as I know and it will be release as soon as its ready (and not sooner then that I hope). As for ZFS, its cool and funny, but I would wait for the Solaris 11 release next year (?) when you want to put it to use in production. But if you really want ZFS hot and spicy then you could go for SXCR ;-)

Upgrading from solaris 9 to 10, with oracle installed

Hi
Friends i have salaries 9 on the my machine with oracle and web server configured,
Now i want to upgrade to solaris 10, any effect to oracle,
Cheer's
Rajendra Prasad

It should work. You can use live upgrade method but needed some space. If upgrade fails ( should not be ) you can always revert back to original setup.
But be ready for installation of same version of Oracle , if needed. No need to say backup is must for OS and Oracle.
You should well aware SMF before upgrdation.
Mahendra Rajgude

Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
             -1: 'startsap.exe' returned an error
             See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
     msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
     disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
     igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        SID
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, ASCII, optimized
pid        5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
     shared lib "dw_xml.dll" version 150 successfully loaded
     shared lib "dw_xtc.dll" version 150 successfully loaded
     shared lib "dw_stl.dll" version 150 successfully loaded
     shared lib "dw_gui.dll" version 150 successfully loaded
     shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01                      <
DpShMCreate: sizeof(wp_adm)          22968     (1044)
DpShMCreate: sizeof(tm_adm)          3642120     (18120)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1296)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Apr 02 11:53:30 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     6916 Ended         no      1   0        0
1 DIA     7724 Ended         no      1   0        0
2 DIA     6044 Ended         no      1   0        0
3 DIA     4300 Ended         no      1   0        0
4 DIA     6992 Ended         no      1   0        0
5 DIA     2412 Ended         no      1   0        0
6 DIA      432 Ended         no      1   0        0
7 DIA     8168 Ended         no      1   0        0
8 DIA     5420 Ended         no      1   0        0
9 DIA     9712 Ended         no      1   0        0
10 UPD     4320 Ended         no      1   0        0
11 ENQ     3476 Ended         no      1   0        0
12 BTC     2676 Ended         no      1   0        0
13 BTC     6816 Ended         no      1   0        0
14 BTC     9636 Ended         no      1   0        0
15 BTC     8356 Ended         no      1   0        0
16 BTC     7004 Ended         no      1   0        0
17 BTC     7284 Ended         no      1   0        0
18 BTC    10048 Ended         no      1   0        0
19 BTC     4560 Ended         no      1   0        0
20 BTC     4196 Ended         no      1   0        0
21 SPO     4268 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          7
wake_evt_udp_now     0
wake events           total     3, udp     3 (100%), shm     0 ( 0%)
since last update     total     3, udp     3 (100%), shm     0 ( 0%)
Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
Vadi

Hi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi

SCSM 2010 to 2012 Management server upgrade failed

I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30   Always:   Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites:        Logic Type:and   AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites:        Logic Type:and   ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites:    Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites:                ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites:        Logic Type:or   WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites:    Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites:        Logic Type:and   RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   PowerShell2Check-err: 0
02:49:36:CheckPrerequisites:        Logic Type:or   PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites:        Logic Type:and   ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites:        Logic Type:and   SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites:    Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.C

Jeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb

CUCM 8.6.2 to 9.1.2 Upgrade fails

I am trying to complete an upgrade of CUCM 8.6.2 to 9.1.2 however the upgrade fails at the very end - I have attempted this 4 times in various different ways from using SFTP to local media I get the following error;
HWModel=7835I3
CPUCount=1
CPUType= Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
CPUSpeed=2000
MEMSize=4096
BIOSVer=IBMCorp. -[D6E150CUS-1.11]- 02/08/2011
ObjectId=1.3.6.1.4.1.9.1.585
OSVersion=UCOS 5.0.0.0-2
SerialNumber= ********
VendorOID=1.3.6.1.4.1.2]|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleaning up download...|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
05/17/2014 13:54:49 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
05/17/2014 13:54:51 upgrade_install.sh|Removing /common/download/9.1.2.10000-28>
05/17/2014 13:54:51 upgrade_install.sh|Started auditd...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::>
05/17/2014 13:54:52 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
05/17/2014 13:54:52 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000>
05/17/2014 13:55:02 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade>
05/17/2014 13:55:02 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock >
05/17/2014 13:55:02 upgrade_install.sh|is_upgrade_in_progress: Already locked b>
05/17/2014 13:55:02 upgrade_install.sh|release_upgrade_lock: Releasing lock (pi>
Installation of UCSInstall_UCOS_9.1.2.10000-28.sgn.iso failed
An unknown error occurred while accessing the upgrade file.
A system reboot is required when the upgrade process completes or is canceled. .
I have previously used this ISO for other clients without an issue and have checked the MD5 is correct
Has anyone else experienced this issue?
Thanks,
Richard

We have got this resolved, after raising a case with TAC they identified that we were hitting the following bug;
CSCub53409
The detail on the bug is very limited but in our case it was caused by an issue with the numbering plan, GBNB 1.1(21) - we upgraded to the latest version 1.1(29) and the upgrade has now completed.

Repository upgrade fails 11.1.0.7 db -10.2.0.5 GC patchset

Installing GridControl 10.2.0.5 on Windows 2003 Server SP2. Initial install successful of 10.2.0.2 using existing database 11.1.0.7. The database was created new to use for GC. Patchset no problems until Configuration Assitant step "Repository Upgrade" failed with errors:
rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
oracle.sysman.emcp.oms.RepositoryPatchUpgrade -verbose
oracle.sysman.emcp.oms.OmsPatchUpgrade -configureOms
oracle.sysman.emcp.aggregates.ConfigPlugIn
oracle.sysman.emcp.oms.StartOMS -configureOms
oracle.sysman.emcp.oms.EMCLISetup
oracle.sysman.ccr.configCCR.ConfigCCRPlugIn
oracle.sysman.ccr.configCCR.ConfigRepeaterPlugIn
Tried to find cause of errors and cannot seem to understand why this step failed.
Considering uninstalling GC and Oracle 11g and reinstalling GC with "new database" option.
Anyone successful at installing GC 10.2.0.5 with an 11g database?
Thank you,
Curt Swartzlander
DBA

pasinc wrote:
Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

SCOM 2012 R2 agent upgrade fails crippling agents

Running into a large amount of SCOM agents that are failing the upgrade from 2012 SP1 to R2 and would appreciate any feedback from my SCOM community colleagues. Warning this issue is not for the faint of heart.
Plan:
I am in the process of upgrading 1900 manually installed SCOM 2012 SP1 agents to R2. I am using SCCM to deliver the upgrade using the standard sanctioned upgrade parameters.
Momagent.msi /qn /l*v %SystemDrive%\SCOM2012AgentUpgrade.log AcceptEndUserLicenseAgreement=1
Problem:
I have run into a problem where on a larger group of systems, 165 servers, where the upgrade fails and leaves the agent in a crippled state. At this point the agent cannot be removed cleanly via add remove, nor can a straight install of the agent
be done. What is required is a manual removal of registry keys and then a clean install of the agent can be performed to remediate. This is no problem and I am able to do this. (Note: all other methods of agent removal did not work ie:
Cleanmom.exe utility or add remove)
Task:
Seeing that we need to do agent upgrades in the future it would be great to know why this happened so we can plan for this in the future.
Notes:
Seems like a random sample of servers (2003/2008) with different applications running on them so that doesn't help in narrowing things down.
Looking at the MSI log, I see a common issue among systems that had this problem.
******* Product: {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (7C:7C) [08:08:43:668]: User policy value 'DisableMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Looking for sourcelist for product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Adding {387306D9-78CE-4E0E-B952-28A50CC8B3EE}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Now checking product {387306D9-78CE-4E0E-B952-28A50CC8B3EE}
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Media is enabled for product.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Trying source C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 2203 2: C:\WINDOWS\SysWOW64\CCM\Cache\LFG00446.1.System\i386\MOMAgent.msi 3: -2147287037
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing net source list.
MSI (s) (7C:7C) [08:08:43:668]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:43:668]: SOURCEMGMT: Processing media source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 2203 2: 3: -2147287037
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Processing URL source list.
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: -2147483647 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: Note: 1: 1706 2: 3: MOMAgent.msi
MSI (s) (7C:7C) [08:08:44:744]: SOURCEMGMT: Failed to resolve source
MSI (s) (7C:8C) [08:08:44:744]: Note: 1: 1714 2: Microsoft Monitoring Agent 3: 1612
CustomAction returned actual error code 1612 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (7C:8C) [08:08:44:744]: Product: Microsoft Monitoring Agent -- Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Error 1714.The older version of Microsoft Monitoring Agent cannot be removed. Contact your technical support group. System Error 1612.
Action ended 8:08:44: RemoveExistingProducts. Return value 3.
Action ended 8:08:44: INSTALL. Return value 3.
Ok so the obvious is that the installer is looking for original source installation files and not able to find them. What is surprising to me however is that the product references a 32 bit scom agent guid
387306D9-78CE-4E0E-B952-28A50CC8B3EE, however this is a 64 bit machine. Our build process dictates that a 64 bit machine only receive a 64 bit SCOM agent.
Doing a search on this product guid I realized I skipped some other references at the top of the MSI log that might offer some more explanation...
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_OM12_SP1_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Modifying OM_OM12_SP1_AGENT_FOUND property. Its current value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'. Its new value: '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_OM_AGENT_FOUND
Action ended 8:08:11: FindRelatedProducts. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding OM_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_OM_AGENT_FOUND.
MSI (s) (7C:8C) [08:08:11:896]: Doing action: _Set_MOMV3_AGENT_FOUND
Action ended 8:08:11: _Set_OM_AGENT_FOUND. Return value 1.
MSI (s) (7C:8C) [08:08:11:896]: PROPERTY CHANGE: Adding MOMV3_AGENT_FOUND property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330};{387306D9-78CE-4E0E-B952-28A50CC8B3EE}'.
Action start 8:08:11: _Set_MOMV3_AGENT_FOUND.
Well that is interesting, seems to me that in the first line the MSI installer reads the OM_OM12_SP1_AGENT_FOUND property and identifies this with a 64 bit agent guid (8B21425D-02F3-4B80-88CE-8F79B320D330), but then appends
the 32 bit guid at the end (387306D9-78CE-4E0E-B952-28A50CC8B3EE). This is the point of my confusion and my suspicion as the cause of the problem I am having.
Concluding thoughts:
Why does the installer seems to first recognizes a 64 bit agent, but then later changes it's property to include a 32 bit agent guid.  Could a 32 bit agent have got on this 64 bit server based on the details of this log? Would this
cause my agents to fail the upgrade? I think so, but looking to bounce this over to another fellow SCOM colleague who may have wrestled with this before.
Thanks in advance if you took the time to read this and think about it. Extra points if you have any extra thoughts!
Keith

Hi,
Have you used Requirement to limit the platform when you deploy application with SCCM.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?

Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Solaris 10 upgrade fails with "mount failed"

Similar Messages

Maybe you are looking for