Solaris 10 upgrade - Major problems - PLEASE HELP

I have a v880 running Solaris 10 11/06 (U3) which I am trying to upgrade to the latest Solaris 8/11 (U10) release without much success. I am simply using the Solaris Installation Program and booting from DVD and running the upgrade option. However the process fails with the following error:
The selected Software exceeds the available disk space.
The Solaris operating environment selected to upgrade contains
a metadevice. Disk Space Re-allocation is not allowed.
Please do one of the following:
Deselect some software to be installed.
Choose another version of Solaris to upgrade. (If available)
Go back and select Initial Install.
Exit the installation.<Press ENTER to continue>
A df -h shows that / has 22Gb free, swap space is 3.1Gb free, /var has 7.1Gb free and /usr 3.1Gb free. All the documentation seems to show that that is ample space. I'm relatively new to Unix and Solaris so be gentle with me if I'm doing something stupid. Many thanks to all. An initial install is not an option as I need to keep the setup as is.

It's probably /usr that it's whining about. It's not very exact when calculating space and 3.1G is not ample space these days. This is why I put everything in the / partition anymore. Don't have to worry about this crap down the line...
You might try copying some stuff off of /usr (if you can find it) and try again.

Similar Messages

  • Iphoto 09 major problems - PLEASE HELP!

    Gosh I really hope someone can help me. .
    I upgraded iphoto 09 this morning and the result has been utter chaos.
    First I have 3 different iphoto libraries for different years. There are albums from 2 years ago now mixed in the middle of 2009 albums (where the websites are listed under Mobile me Gallery on the left hand side).
    To make matters worse, every Mobile Me Gallery is malfunctioning. If you click on a gallery, it starts looking like it is updating the album (even though no changes have been made). It then comes up as an error and takes away the link for that gallery. When I tried to click the link to get the pics, the links are all unavailable. I have hundreds of galleries that I have created over the years.
    I hope this is a common problem with new users. Please let me know.

    Welcome to the Apple Discussions. Did you just upgrade the application and then launch each existing library with the new library?
    Backup and launch iPhoto with the Command+Option keys depressed to rebuild each of the libraries. Select the last three options.
    Click to view full size
    Happy New Year

  • IMovie Major Problem - Please Help!

    I imported video clips from an analog source though my DV VCR into Final Cut Pro via FireWire but for reasons too technical to go into I now have to edit the project ASAP using iMovie 5.0.2
    The problem is that when I import the clips they are stretched into a letterboxed format that distorts the image. Other clips that were brought in with my DV camcorder (which were shot on the camcorder) look fine and fill the screen properly but I can't find any way around the stretching problem with the clips captured from the analog source. This project has to be done by the end of the day OR ELSE! Is there anybody out there who can help me solve this problem?
    Thanks in advance!
    Accumulator

    That one didn't work either. I don't understand why the clips looked fine in Final Cut Pro and look fine in Quicktime but are distorted in iMovie. I know this is an Apple Forum but for crying out loud, is there ANY editing software that I can get that will just play these things correctly while my Quad is in the shop? I even have all of the clips ready for dropping into a timeline (trimmed in QuickTime Pro) and all I need to do is render it into video and audio TS files and I'm good to go. Otherwise I lose a major client! This is crazy because I own Final Cut Studio but my software is back in the States (I'm in London right now)!
    Apple makes great products, and I'm a very loyal customer but this particular problem is gonna sink my business!
    Any help would be greatly appreciated!
    17" G4 PowerBook   Mac OS X (10.4)  

  • Major Problem Please help me.....

    Im Using Macbook black operating at Mac OS X (10.5.3), Recently I cant open my Adobe Photoshop so i decided to re-install but i still cant. So what i decided to do is to Clear all the stuffs from my macbook as there we too much things also. I want to be totally empty so i insert the Mac Disc inside and off my mac gives me a blank screen. help me please...

    Insert your Leopard install DVD
    Hold down the C key and keep it held down
    Press the power key to start it up
    Continue to hold the C key until the computer is done booting up

  • 645 Ultra and Geforce 4200, major problems, please help!!

    I have read through this forum and have seen different problems with this mobo and geforce cards, so first here is my set up.
    P4 1.6A
    645Ultra Rev 1 Bios 1.9
    Visiontek 4200 128mb ddr
    IBM Hard Disk 7200 rpm
    300W Codegen PS
    256 Corsair DDR333
    Let me put it like this: With just the video card in, and "installing" winxp on a fresh formatted drive. The card/board crashes the install. I had been using a radeon 7500 on my system for awhile with no problems, but wanted more power, so bought geforce 4. Did the clean uninstall of radeon drivers,bla bla, and install the geforce 4. Nothing but problems, randoms hangs, and eventually would not even let me boot past the bios screen. When I boot in safe mode, it crashes my computer. When I put back in the radeon, no problems.
    So I reformatted my whole comp, knowing anyway that it was not xp, so I had to use the radeon to reinstall xp since installer crashes with geforece card.(bye the way I tried my older geforce256 SDR, and same problems). I install fresh system, but do not install radeon drivers, turn off comp, put in geforce card on fresh install, again no drivers, and it still crashes my system...random hangs. So I install the drivers from the install CD, forgot which version, and again still crashes. So can anyone help me. This is clearly a mobo card conflict.
    Could it be IRQ settings or Powersupply not enough?
    Thanks for any help

    I would not say it is a PSU problem as you have the same issues with the other cards.
    IRQ could be if you have anything plugged in PCI slot 1 and 2.

  • MAJOR PROBLEMS PLEASE HELP!!

    Before I contact AppleCare I want to know what if I'm the only one who is experiencing all these malfunctions first.
    I bought my iMac last year right around this time and I've never had problems with it until now.
    I decided to leave windows computer about two years ago, I have an iMac and a powerbook g4 now for the very reason why I hated windows, that whole lagging and screen freezing thing.
    Never seen it with any macs before until just last week.
    My iMac just froze. I didn't know what it was.
    I had about 9 safari windows opened and I believed that most of them were in tabs.
    It never freezes until I Minimize a window. It just freezes. Can't click on anything even though the cursor is still active, the screen is still active its just not doing anything. So no panic I just need to restart right? Just a day later it did it again. And it keeps doing it. So I dont know whats wrong. Here's an image as to how it looks like.
    Another problem I am having is with my external hard drives. I dont think its the hard drives because when I connect it with my powerbook it has no problems but with my iMac, every time I restart my computer it gives me that error about my external drives.
    What do I do??

    Since it is systemwide, I'd try to repair this with 10.4.10 Combo Updater Intel.
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    EDIT: Is there something odd going on with red, yellow and green areas at the bottom of your display, or is that just a low quality image causing that?
    -mj
    [email protected]
    Message was edited by: macjack

  • Imac 27 i7 with lg m2762d monitor tv major problem please help

    i guys i have just turned to macs and im stuck
    i have a imac 27" i7 and its beautiful but i wont to connect a second monitor i have its a lg m2762d
    i bought a dr doc mini display port to hdmi cable and the hdmi cable
    when i plug it all in it wont give me the option to use 1920 x 1080 resolution so the second monitor looks naff
    i know the cable works as i tried a samsung 24 inch monitor and i know the lg monitor works in 1080 as ive tried it on my pc
    my question is: is there a compatablity issue or a driver issue and is there a way round it
    many thanks

    Are you using Extended Desktop or mirroring for the displays? Are you getting a Sys Prefs/Displays window on both displays when you go to Sys Prefs/Displays on the iMac?
    Apple suggests that you connect and turn on the ext display before starting up your Mac so that it gets a good read from the ext display's information that it uses to identify itself to the iMac.
    Dah•veed

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • IMovie 09 problems PLEASE help!!! so frustrating!!

    iMovie was working fine before, until I started a new project and when I tried to playback, it only plays the audio in the viewer... I tried viewing in fullscreen, but it was just a black screen, with audio playback only and to make matters worse, it would not exit fullscreen playback mode. I literally had to unplug my iMac to shut it down, and it DID NOT AUTOSAVE ANYTHING! I also notice most of the menu items are greyed out. I can't add themes, transitions... nothing... I can't even select project properties.. and the project is there, at least the first few clips are there... but the hours of work after is lost. I tried editing AGAIN, and it is not saving any of the new changes I made, even if I shut it down properly. I KNOW how to use iMovie, I've read endless forums, no proposed solutions are working for me.. I am NOT upgrading to '11 PLEASE HELP! This is very frustrating!! - thanks

    Hi
    Un-plugging the Mac is a dangerous action and nearly always adds small errors on the hard disk - With luck it starts again - if unlucky it doesn't and eventually need repair by pro - to be back in action.
    Just to mention it.
    If this happens to me I do
    • Run Disk Util tool and Repair Permissions
    • Start Mac from DVD that came with it and now orient to Disk Util tool on this and - Repair Hard Disk
    (This must be done when Mac runs on DVD or external Hard Disk - Can not do Brain Surgery on one self.)
    • Then I would re-start from Main Mac OS Hard Disk - usually named Macintosh HD - then trash the pref file/s associated to Application that behaves Badly (usually in the User Account Library / Preferences
    Else see my long list of what to do
    When in Trouble
    When iMovie doesn't work as intended this can be due to a lot of reasons
    • iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    • Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
    • Event or Project got corrupted - try to make a copy and repair
    • a codec is used that doesn't work
    • problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    • version miss match of QuickTime Player / iMovie / iDVD
    • preferences are wrong - Repair Preferences
    • other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    • External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    • USB-flash-memories do not work
    • Net-work connected hard disks - do not work
    • iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
    This You do by
    _ close iPhoto
    _ on start up of iPhoto - Keep {cmd and alt-keys down}
    _ now select all five options presented
    _ WAIT a long long time
    • free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    • external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    • GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    • Screen must be set to million-colors
    • Third-party plug-ins doesn't work OK
    • Run "Cache Out X", clear out all caches and restarts the Mac
    • Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    • Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    • In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • System D.O.T automatically why? problem please help me

    hello everybody,
                           please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY  ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
    PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
    MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
    DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
    MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
    MSI CD ROM
    SONY FLOPPY
    COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
    STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
    AMI BIOS 3.4
    SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
    WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !

    Hi,
    Go to here for MSI LIVEUPDATE
    http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
    Install and run program.........
    BIOS problems:
    http://www.msi.com.tw/html/support/bios/note/boot.htm
    If you would like to download bios and install........
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
    You can also choose 3.7 if wish too first.....
    I am sure this will help you.
    Del

  • Logic Pro 8 upgrade MAJOR PROBLEM

    I bought a powerpcg5 and have been using Logic Pro 8. I dont have any original packaging since i moved and i lost it. My brother tried pirating Logic Pro 9 and it removed my Logic Pro 8 registration information which caused me to lose my serial. I try opening Logic 8 and it asks me to register and enter the serial number which i dont have. I am in dire need as i run a studio. I need help ASAP!
    -Thanks

    Logic Pro 8 upgrade MAJOR PROBLEM
    There was never a problem since you tried to upgrade from a pirated copy of Logic 9
    Why did you even think this could go well?
    I dont have any original packaging since i moved and i lost it.
    Did you check Lost and Found?
    I am in dire need as i run a studio.
    Yet, you let your brother load a pirated copy of Logic 9.
    I need help ASAP!
    You really don't need help.
    Why is it that when I see POSTS like these that the person registers the same day.

  • My macbook pro run slowed after upgrade to Yosemite, please help!

    Why my mac slowed after I upgrade to Yosemite, Please help!

    You might want to update your profile. Helps people trying to help you.
    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t  solve my problem. please help!!

    my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

    Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

  • Can't Figure Out If My Macbook Can Upgrade , currently running 10.6.8 and wanted to get latest version os but can't upgrade current os Please Help !!!!

    Can't Figure Out If My Macbook Can Upgrade , currently running 10.6.8 and wanted to get latest version os but can't upgrade current os Please Help !!!! Hardware Overview:
      Model Name: MacBook Air
      Model Identifier: MacBookAir3,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 1.4 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: MBA31.0061.B01
      SMC Version (system): 1.67f4
      Serial Number (system): C0*******DQX
    processor 1.4 ghz
    mem 2gb 1067 mhz ddr3
    startup disk Macintosh HD
    <Edited by Host>

    You can upgrade to Mountain Lion
    Upgrading from Snow Leopard to Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

Maybe you are looking for