Solaris 10 will not boot after patch install

running solaris 10 on a Netra machine. installed patch via sun manager and after reboot I get the following error. If anyone can help I would appreciate it.
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0:a File and args: -s
File not executable.
boot failed
Enter filename [platform/sun4u/kernel/sparcv9/unix]

Try following:
1. Go to OK prompt
2. boot -asv
3. just follow the instructions on screen.
(If above does not help)
1. OK prompt
2. boot kernel/unix
(this will help you boot in 32 bit mode)
If kernel got corrupted then look for options of re-install or restore from backup.

Similar Messages

Compaq Presario CQ57 - Will not boot after ram install

I was upgrading the ram on my father's old compaq, and was going along fine. I got the ram in, closed it all up, and went to boot it.
I was greeted with a black screen, a blinking caps lock light, a blinking power button light and the orange wifi light. I've made sure it has no static multiple times, and have tried slowly reintroducing power sources. I have cleaned the ram and the input, swapped out ram cards, everything anf nothing seems to work. When I turn it on I hear the CPU fan, and a single beep, then silence after a few more seconds.
Anyone wanna help me with this? I'm a mac lass now a days, so this is a bit out of my memory.

Hello @Remyyy ,
Welcome to the HP Forums! I hope you enjoy your experience!
I understand your computer will not start properly, since changing the RAM. I will do my best to assist you with this issue! To troubleshoot, please try the steps in this HP document: Computer Does not Start
This document contains steps such as resetting the notebook and more, corresponding to the exact symptoms. I believe this document will resolve the issue. If not, I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Help Please! Macbook will not boot after MacOffice install

I've never used a mac before until now. I've a 2.2ghz, 2gb ram macbook(late '07, it has an *hitachi HD* which I've had for less than a week and was running fine until I installed mac office 2004 student edition.
During the installation process i was prompted to update macoffice and after a while i couldnt see the microsoft update status bar and i just got to the screen where it said installation complete, I clicked 'finish'and then I waited for 30mins or more where i got a spinning colour wheel, and the fans were spinning a lot and it felt quite warm so I decided to turn it off.
When I booted up again I got a *flashing folder with a question mark* on the white/greyish screen. After resetting the P/VRAM(?) a number of times I eventually got into the desktop. Thinking that microsoft must have corrupted some system files. I decided to do an erase and install but when i tried to do it I got a warning screen with 'install failed'and 'the installer is experiencing errors installing on "macintosh HD" The disk may be damaged. Please try installing on another disk...click restart and try again'.
I then tried to use 'disk utility'using the os x disc. I ran first aid on the macintosh HD. I verified and repaired disk permissions but when i tried running verify/repair disk i get in red 'Invalid b-tree node size, volume check failed..Error:filesystem verify or repair failed.'
The lines for apple care are shut today as well..any light shed on this problem appreciated. Any ideas what i can do...I really hope it isnt hardware failure..but the hard shutdown/restart suggest it may be?
Message was edited by: Anon87
Message was edited by: Anon87
Message was edited by: Anon87

The question mark means that important system files needed for startup are either missing or damaged. The only solution is to boot from your Installer DVD and perform an Archive and Install or an Erase and Install.
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Windows 8.1 Pro will not boot after clean install!

Hello all recently went from a Win7pro to Win8.1pro I did a clean install and formatted my HDD just last night. Woke up this morning my machine was turned off I had let it stay on this night as I was installing updates for it. So i turned on the computer
and got nothing let it sit for about 30 min and still got nothing and but nothing im talking just a blank screen. I then did a "hard shutdown(just pressed power button till it turned off the computer)" When I tried to turn it back on again this time
i got the ASUS Sabertooth X58 splash screen to enter bios or load boot devices so was kinda excited. However if i try to enter this BIOS it sits on another screen (American Megatrends) just saying entering setup... Same goes for the Boot Devices page. So let
me back up for just a sec, After I did the clean install it worked fine for about a couple hours I had time to install AVG and Spybot Search and Destroy and then went to bed and let it do updates. I run Win8.1Pro at school and work and have never had
this problem any suggestions?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

AE CS6 will not load after patch install

Thanks for the patch! We are still having trouble:
This is the message we get:
"The application Adobe After Effects CS6 can't be opened. -10810"
Thanks!

> This is the message we get:
"The application Adobe After Effects CS6 can't be opened. -10810"
That is a Mac OS error.
See this page: http://www.thexlab.com/faqs/error-10810.html
Begin by restarting your computer and starting no applications other than After Effects.

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

Mac book pro will not sleep after i installed mavericks

mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

Apps will not open after ios5 install. Any solutions?

Apps will not open after ios5 install. Any solutions?

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

Premier elements 12 will not run after re-install

Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

Brand New 27" iMac i5 will not boot after installing software updates

I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
Any suggestions? A little frustrated here....

If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
Does this help you at all?

IMAC 21.5 " allinone will not boot after OS re-installed

Had to erase HD and re-install Snow Leopard from installation disc. It completed OK but sys will not boot, tone sounds and Apple logo comes up and 'wheel' is spinning, but that's it. Waited for over half hour before shutting down. Thanks for any help anyone can provide.

Try a safe boot by holding the Shift key down between the startup tone and logo.
If succesful, go to System Preferences > Startup disk > select your HD and restart.

Windows 8.1 will not boot after setting up dual-boot with Linux Mint 17.1 Cinnamon

In which forum should I ask this question?
After installing Linux Mint onto a partition of my hard drive, Windows 8.1 is listed a choice to boot into after restarting my computer, but will not boot up. It suggests a boot repair and to obtain Windows 8.1 from my distributor. I have seen on other forums
that this has not worked, and I was wondering if anyone here had any suggestions for how to proceed.
Thanks in advance.

You can try them over here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Solaris 10 will not boot after patch install

Similar Messages

Maybe you are looking for