Solaris 10 will not boot from DVD on my system
I first installed Solaris 10 on my system and it worked fine. Then when it went to boot the OS it just kept rebooting. I must have made a midtake in the install so went to install it again.
Problem is that now the DVD will not boot and give me the option to install Solaris like it did before. It instead goes straight into GRUB. I thought that this was because of the previous install on the hardrive. But then I disconnected my harddrives and still the same problem.
I tried the disk on another system and the disk booted with the option to install Solaris. So the question is why does the disc boot into GRUB even when there is no hard drives attached to my machine
as was mentioned, let's see /etc/vfstabHere it is:
#device to mount #device to fsck mount point FS type fsck pass mount at boot mount options
fs - /dev/fs fs - no -
/proc - /proc proc - no -
/dev/dsk/c0t0d0s1 - - swap - no -
/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no -
/dev/dsk/c0t0d0s5 /dev/rdsk/c0t0d0s5 /usr ufs 1 no -
/dev/dsk/c0t0d0s4 /dev/rdsk/c0t0d0s4 /var/ ufs 1 no -
/dev/dsk/c0t0d0s7 /dev/rdsk/c0t0d0s7 /export/home ufs 2 yes -
/dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s3 /opt ufs 2 yes -
/devices - /devices devfs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
/dev/dsk/c0t1d0s0 /dev/rdsk/c0t1d0s0 /data ufs 1 yes -Sorry for the formatting, I had to type it out since I can't get any files directly off of the server.
The last entry in the vfstab file is the only entry I added myself. It is a secondary hard disk that I mounted to the directory /data. Everything else was automatically created at install according to the partitions that I defined.
I really need to get this server up and running as fast as possible. I want to avoid re-installing everything since that would be really time consuming. Thanks in advance.
Similar Messages
-
Flat Screen imac iMac won't boot up, will not boot from DVD
My 24" imac flat screen will not boot. I only get a blank gray/white screen. Reset the PRAM and tried to boot from the DVD. I held the C key down when I powered on but the system will not boot from the DVD. If I wait long enough, the DVD will eventually be ejected. I have had HD issues and Disk Warrior indicated that the drive was damaged. Will a dead hard drive cause the system to not boot from the DVD? Is there any way to get the system to boot from my DVD?
Hello PMcDer,
Welcome to Apple Discussions!
By what you are describing you're correct in believing your drive is probably gone. The sad news... if Disk utility can no longer see the drive, your ability to retrieve any data off of it is getting slim.
There are a couple of options for data retrieval.
1. If you still have Apple Care have them fix it. But make sure they know that you do not have a backup.
2. If you do not have Apple Care, have an Authorized Apple Tech replace the drive and make sure that they will give you back the old drive. This may prove to be a challenge. Or you can replace the drive yourself. It is not easy for some but take your time and you'll have no problems. Lots of youtube videos on this as well as on-line tutorials.
3. You could try a Hard Disk Utility program like Disk Warrior to see if it can help, but it's not free.
4. You could pay someone big bucks for Data recovery in order to get the data of the drive for you.
If you decided to do the HDD swap yourself. You could purchase a 3.5" firewire enclosure that you could put your old drive into once you do the swap. Plug it into the iMac and prey that it recognizes it. Then "MAYBE" you could copy the data over to the new drive, but that is a stretch. -
Absolutely will not boot from cd or dvd
Someone has given me a Sun Ultra 10 workstation ... problem is that no matter what I do this machine will not boot from the optical drive. Extremely fustrating. The errors I am getting are "Bad magic number in disk label" and "Can't open disk label package" and "can't open boot device".
I have tried three seperate drives, three seperate IDE ribbons, and three different disks. I have tried on both IDE channels, master and slave. The cdrom alias seems to be hard set and does not change when I change its position on the bus. A combination of devalias, probe-ide and show-disks helps. What happens when I try and boot from the correct device is that the disk spins up, I get the error(s) and thats it.
I am aware that there has been a lot of discussion about this in the past and have spent absolutely ages reading pages from google results but none of it seems to help me.
Can anyone shed some light on this for me? It would be greatly appreciated. Thank you :-)nippysaurus wrote:
Someone has given me a Sun Ultra 10 workstation ... problem is that no matter what I do this machine will not boot from the optical drive. Extremely fustrating. The errors I am getting are "Bad magic number in disk label" and "Can't open disk label package" and "can't open boot device".
Just checking that you are trying to boot from a Sparc version.
I checked what happend with boot cdrom -s on a Sun Ultra 10 from a X86 Solaris DVD and got the errors:
Can't read disk label.
Can't open disk label package
Can't open boot device -
Wiped macbook pro will not boot from install DVD
I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs. The computer will not boot from the DVD. I have booted holding down the C key and nothing happens. I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
How do I get it to open up the Utilities from the DVD to install the operating system?It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
Exactly which MBP do you have, and what serial numbers are on the discs ?. -
IBook G3 will not boot from CD/DVD
Ok, I have an iBook G3.
I was restoring it to factory with the Software Restore disks which came with the unit as I was planning to move on to a new unit.. But there was a power cut in the middle of the process and the unit shut off. Now, it does not recognise a HD when booting holding option.
It also will not boot from any CD/DVD other than the Apple HW Test disk provided with the unit.. All other disks spin up and then get ejected, on the odd occasion it does not eject, it boots to a icon of a floppy diskette with a flashing ? (Saying that, I did manage to get it to load from the restore disk 1 once, but it just said it could not mount the image file)
The HW test disk returns no problems
I have reset PRAM multiple times, and reset nvram and all in Open Firmware. I have also reset PMU as a last resort, but no luck
Any ideas?Hi, and welcome to Apple Discussions.
Do you have DiskWarrior, maybe? -
T500 will not boot from bootable CDs/DVDs, but will read and open files on them
System: 2 T500s, both manufactured early April 2009, win XP, ATI Radeon 3650 graphics,4GB RAM, latest Lenovo drivers installed..
Problem:- Our 2 T500s cannot boot from any windows coded recovery CD -except Lenovo's rescue/recovery discs. Some -but not all- Linux code recovery CDs do boot the T500. Every other kind of CD and DVD such as audio and video works fine in windows XP.
Here an example of our 2 T500s' failure to recognise bootable CD/DVD discs. All the files and folders on a Paragon Partition Mgr v8.5 Recovery CD can be viewed in windows explorer and files such as jpg, txt and zip can be opened. This CD will not boot the T500, however, it will boot our other -non-Lenovo- computers. The same applies when the media are DVDs with identical content.
We have tried several different kinds of CD and DVD media to no avail. Burning the media on other computers and using several kinds of burning software does not help, ourT500s refuse to boot from them too.
The problem seems clear enough, on starup our T500s fail to distinguish between windows coded bootable and ordinary CDs/DVDs -unless they are Lenovo recovery/restore discs.
A solution would be gratefully received.Thank you for your very kind assistance,
Q: "1. Did you apply the DVD firmware fix here?"
A. It was` already installed on our 2 T500s. We have also applied just about every driver update from Lenovo.
Q: "2. Did you try booting from a USB optical drive that you first attached to another system where you could verify that booting from it was possible?"
A. Yes, many times from a USB CD/DVD drive, it failed too. We burned on that drive too, but the T500s will not boot from those CDs either.
Q: "3. In this thread the solution was to use another burning program than Roxio..".
A. We have used the Paragon internal ISO creator/burner, the Roxio burner that was preinstalled wth the T500, BartPE internal ISO/burner ,InfraRecorder and others too. Made ISOs and burned from them, burned CDs directly on the fly etc, all to no avail..
For some reason, our two T500s' CD/DVD drive controllers or some intermediate software act as if the CD's boot sector is not present. Clearly, something (BIOS, software, unstable hardware, or ? ) is blocking the read or write of the data necessary to boot these CDs. Whatever that 'something' is, it has no effect on burning and booting Lenovo recovery CDs.
The bizarre part of all this is that a`Lenovo recovery CD burned on the T500 drive WILL BOOT the T500. A Paragon v8.5 recovery CD or BartPE CD burned in one of our non-Lenovo computers will boot ithat and every other computer we have except our T500s.
PS Thank you for the link to the new version of Roxio, will download and install it. -
G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD
We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
We were in the process of installing 10.4 Tiger before placing it for sale.
The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
We have done the following during our troubleshooting:
- Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
- Remove RAM 1 stick at a time and reboot
- Replace RAM with RAM from another working Quicksilver
- Replace Video Card with one from another working Quicksilver
- Zap PRAM
- Reset CUDA switch
- Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
- Tried booting from the Macintosh Server G4 Software Restore CD
- Tried booting from Mac OS X Server CD
- Tried booting from AppleCare Protection Plan CD with TechTool
- Tried booting from Diskwarrior CD
- Tried booting from an external FireWire drive with a disk image of Tiger OS Install
- Tried booting with the hard drive disconnected
The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
I would look at the CD drive cables, etc, and see if another drive gives different results.
You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
HT1310- Startup Manager: How to select a startup volume -
IMac will not boot from any mode except Target Disk
I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide: 0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.1
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AirPortBrcm43224 600.36.17
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3 -
BIOS update, then will not boot from any drive
This old laptop, 3000 C200 8922 was acting very clunky when on wireless.
Downloaded Bios Version 63ET62WW and flashed it into the bios.
Now, even though I can get to the bios screen, and it shows the hard drive, DVD/CD drive, it will NOT boot from either.
It will also "see" a usb installed, but will not boot from it.
I have removed all power and cleared the CMOS several times and I still have nothing. Tried two different hdd's which have been in the machine and same results.
HELP!! I should have never messed with it......hi k4pew,
One rule after a BIOS update is to Load optimize deafults after updating.
Try that go inside BIOS Hit F9 to load defaults then F10 to Save and Exit.
If not
Try turning on the computer and start hitting F1 to load the Recovery Menu and see if that will push then Try Reseting the PC.
If still the same Im afraid that the BIOS needs to be reflashed.
Im not aware of any flash tool or a your Previous BIOS Version Firmware available for download.
You can try calling Lenovo Technical Support for any options available for repair.
Im sorry to hear what happened
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Optical drive trashed and MB Pro will not boot from USB image
Hello,
New here but I have searched and tried all I know to get this MBP working right again. My disk drive is trashed and has been for some time now, this is why I have a bootable version of Snow Leopard on an 8G flash drive. When my MBP began acting funny recently and I went to disk utility to verify permissions and the disk. Both failed = must boot from disk to repair, thus my issue. For some reason by MBP will not boot from the usb image I have used previously??? Pressing C or Option during startup does not work. If I press Option, I only get the harddrive option, C yields nothing and the computer boots normally.
Please!! let me know how / what you would do to resolve this. I don't understand why I have previously been able to boot from this same file on the same drive previously to repair my disk / permissions but cannot do so now. FWIW, I tried placing the file (OSX) on my external HDD to boot from, this did not work either (USB HDD).
Thank you in advance for your input!!It isn't clear what you mean about your HD being trashed or which disk (HD or USB drive) you are trying to repair, but either way you need to start up from your Snow Leopard installer DVD & instead of installing anything go to the Utilities menu & run Disk Utility from there to repair either or both of the disks.
-
Intel Xserve will NOT boot from hard disk drive
I have two Intel Xserves 2.0 QC machines
I have tried to re-install version 10.4.11 OS (don't ask) onto a Hard disk drive that is in a Disk drive caddy and inserted in the machine.
When booting from The installation DVD media
The disk is seen by the "Disk Utility" (the disk is partitioned as GUID boot) and the installation proceeds to the disk.
Once the first pass of the installation is complete and the system reboots, the system shows the folder and ? mark.
If I boot and hold "ALT" key to view all avaialble boot options the Hard Disk Drive does NOT appear as valid boot disk.
It does show, the still inserted Installation DVD.
I CAN boot from an external firewire drive and the Hard disk drive is visible to the OS once logged in.
I have tried different caddy postions (left, middle and right)
I have tried bona fide Apple supplied Disk drives
I have tried various different caddies
I have tried installing Operating System 10.5.* and 10.6.8 server
I have run SMC reset and system reset
But still I cannot boot off from any Hard Disk Drive inserted in a caddy at the front of the system.
Has anyone seen this behaviour?
Is it fixable?
Do I have replace something like the Hard Disk Drive back plane circuit board? Or even the main logic board?
I have now run out of ideas and cannot find any help in discussions or just googling.
ANY help would be very appreciated
Regards
TonyAntonio Hi !
QC = Quad core or QX as it is written on the "pull out" serial number tab at rear of system
I have 3 late 2006 Intel xserves
On my intial posting I declared 2 were 2.0 machines - when I was trying to be concise
2 of the macines are 2.66 systems and 1 is 2.0 system - all are QX machines
the 2.0 and 1 of the 2.66 will NOT boot from the ADM and disk inside the system - whereas the other 2.66 system will.
I have many different Caddies and these have different product/model number labels
603-9965
603-9545
603-9796
these are marked "intel SATA"
The 80Gb was only one of the drives tested - I have used Seagate 400Gb 750Gb and 1Tb - all of which have been used in systems at one time or another
and as I said the drives ARE visible once the operating system (either installation DVD or external firewire are booted from) - they are just NOT visible when the system is searching for boot media.
Thanks for the guide - I will look through that and continue to try and find an answer -
Hard disk not recognised - will not boot from cd & No FW Target Disk mode
hi,
some help would be greatly appreciated.
Some time ago i was switching internal hard drives around and wound up with a kernel panic of some sort (see my previous posts).
following on from this I have tried FW target disk mode with no success, and it will not boot from a retail Tiger install disc (this machine has tiger installed (i think!). I can't force a boot from the optical drive and i also can't even force it to eject the disc inside to try another install DVD/CD (I have panther discs lying around also).
when i start up with the c key nothing happens, but when i start up with the alt/option key i get a closed padlock symbol, password entry field and a "right facing arrow" button.
anyone got any clues with this? i'm guessing it could either and/or be an internal hard drive ribbon failure (i have swapped internal HDs multiple times in this machine, which can't be good for it) or the familiar PRAM problem (although why would it not boot from an install DVD if this was the case?). I have changed the power supply unit in the past due to having a power cable snap off inside the original one - damage to PRAM caused by this?
help would be muchly appreciated!
JesseHi, Jesse. Remove the hard drive and its cable, then see whether you can start up from a CD or DVD. If that works, replace your hard drive cable.
-
MacBook (not unibody) will not boot from Boot Camp USB Key
Hello
I have a MacBook Pro 2007 (17", 2.4GHz, 4GB RAM and SSD) with a defect SuperDrive, and I want to install Windows using an USB key instead. But the computer will not boot from the USB Key, even though the USB key works on my MacBook Retina. Also I was able to install Mountain Lion using USB Key, on the MBP 2007.
Here is a bit more details:
I've installed Mountaion Lion from the same USB Key (so boot from USB works).
I've installed a Windows 7 Boot Camp using the SuperDrive before (when it was not defected)
I've partitioned the harddisk using the Boot Camp assistant (this requires a Windows DVD in the SuperDriver... however it worked just enught to be able to have OS X recognize the Windows DVD, and create the Boot Camp partition). So far so good. Installing from the SuperDriver howerver does not work.
I've created an Windows USB Key using my MacBook retina. Because the Retina does not have a DVD, the Boot Camp assistant offers the creation of a bootable Windows USB Key from an Windows ISO file. I've used this USB key to install Windows on my MacBook retina.
When I try to boot my MacBook 2007 with this Boot Camp USB Key, it shows an "EFI Boot" option (with a orange USB logo) in the MacBook boot menu. When I select this nothing happpens. The mouse freezes, and the computer never boots.
Questions:
Shouldn't I be able to boot from an EFI USB Key on this MacBook 2007, when I'm able to install Mountain Lion using a USB Key?
When I installed BootCamp using the SuperDrive, I had to do som "magic" to make it bootable. Like this: http://www.logicalvue.com/2009/10/installing-window-7-x64-on-a-macbook-pro-using -bootcamp. I tried doing the "oscdimg -n -m -bc:\efi-dvd\boot\etfsboot.com c:\efi-dvd c:\efi-iso\win7x64.iso" trick and create a EFI bootable ISO and created the from this USB key using http://unetbootin.sourceforge.net/. Same result... the USB key shows up in the boot menu, but nothing happens when I select it (except the mouse freezes).
Any suggestions? Right now it feels like I have a bricked computer, because my kids needs Windows to run their games.
: ThomasThanks... I just tried rEFIt... and it almost worked.
After installing rEFIt I got several different boot options:
Bootmgr.EFI - This failed quick with a "unsupported" message
Bootx64.EFI - This actually started the Windows installation with "Loading files.............". But after a few minutes when all files was loaded, the screen went black. I tried ataching an external screen, but the screen was still black.
Boot from "Bootcamp" drive... as this drive is empty nothing happend.
Boot from "USB Key"... I'm not sure how this is different from the first 2 options... but nothing happend. I belive this is what happens if I try selecting the USB key from the build in boot manager.
Ofcause, whan I saw the "Loading files......" I thought I solved the problem, but as you can tell, I'm still stucked.
Actually... I tried with both Windows 7 64 bit, Windows 8 64 bit and Windows 8 32 bit. Only Windows 8 64 bit, got me to the "Loading files.....". This was created with the Retina Boot Camp assistant.
I also tried my own home made Windows 7 and Windows 8 ISO (created with this link: http://www.logicalvue.com/2009/10/installing-window-7-x64-on-a-macbook-pro-using -bootcamp).
I guess my problem is another now. I'll continue my hunt... but I don't have more time right now. So I've installed Parallels and Windows 8 for my kids. Not optimal, but at least the can play their games. -
Power Mac G4 400 MHz (AGP graphics) will not boot from hard drive
I have a Mac G4 400 MHz (AGP graphics) Machine Model: PowerMac 3.1 CPU Type:PowerPC G4 (2.8)
When I try to boot from the hard drive I get the folder with the flashing question Mark. The Machine will start up from the OSX 10.4 installer disk.
The system was running OSX 10.4.9 fine. I began to have problems with the hard drive, so I replaced it with an old Maxtor 5T040H4 40Gig Apple branded drive that I had sitting around.
The drive is jumpered (r50) for Master/Single.
I erased the drive in the old G4 using disk utility and wrote all zeros. I then used my store bought Tiger 10.4 install disk to install 10.4 on the drive.
After restarting I still get the flashing question mark. If I leave the Install disk in the DVD drive the system will attempt to install again.
I have zapped the PRAM, pressed the CUDA button, removed the battery and let the system sit unplugged for over and hour and it still will not boot from the hard drive.
To test the drive I removed it and put it in a Granite Digital firewire enclosure and connected it to another mac. The drive shows up and the system appears to be installed correctly.
What am I forgetting to do? Does anyone have any suggestions.
Thanks in advance.
Wesley G.Hi! If Tom's solution doesn't work I would reboot from the install disc and then partition the drive as 1 partition instead of erasing it. Sounds like the driver on the disk is too old and installing a new partition map should write a new driver to the drive that is compatible with Tiger. Other than that it is possible that the drive has a spin delay jumper enabled and the drive isn't spinning up fast enough and the computer isn't looking long enough for the drive. Tom
-
I'm trying to upgrade to SL from Tiger but the system will not boot from the CD. It reconizes the cd And launchs giving the install option. When install is selected I get a screen with only a restart option. After restart it comes back to the original install screen. Ran disk verify which found an issue. Put the original Tiger DVD in to try to repair and I get the same thing.I have tried the following.
1) Added a new external DVD drive as I thought it could be a hardware issue with the internal drive.
2) Restart holding "c". System simply boots from the hard drive.
3) Reboot holding option key. I receive the hard drive or cd choice. select CD. It boots as normal off the hard drive.
4) Selected Boot from CD in the system utilities start menu. System still boots from the hard drive.
5) Unplugged system for a few minutes. Same thing will only boot from hard drive.
6) reboot holding command, option, P, and R keys to reset. Same thing.
7) Unplugged all peripherals, except external DVD. Same thing boots as normal from the hard drive.
Currently running 10.4.1
Note when look for updates is selected the system always says none available. Other software updates fail.
Any ideas would be appreciated."A Mac that connot boot from an appropriate Installer/Utilities CD/DVD has a Hardware problem."
As a desperation move, you could try pulling your Hard Drive (with power OFF) to see whether you can boot from the DVD alone. It should still boot even if, when it gets there, there will be nothing to Install on.
EDIT: The theory you are testing is whether something on the Hard Drive is interfering with booting up in general.
Maybe you are looking for
-
Safari is not loading pages correctly or even not at all. Help please!
So my Safari is not loading pages correctly, making some have just plain text with no images, and others partially loaded with no images or no video. Some pages, after trying to refresh, completely refuse to load and say that Safari can't find the se
-
Some persons are shared for some identical activities in operations
Hi My client requirement is some casual labours are working as setup team who will be involved all the setup activities of different operations in different machines. My client wants to capture them as capacity and wants to see their utilisation. I t
-
HT204053 i have two accounts and want to download the music from both how do i do that
i have two itunes accounts and music on both i want to dowload the music from both onto one phone but can't please tell me how to
-
Why do my captions not appear in my image project?
Why do my captions not appear in my image project? Is there a command to turn them on?
-
Recordset type of data on Collections
if i were to implement this and this is really dynamic can contain a lot of data runtime. i as key and has its own set of unique values j as key and has its own set of unique values. k as key and has its own set of unique values. example, 2 separate