Solaris 10 x86 failed to install

Hi, I downloaded Solaris 10 x86 a few weeks ago.
I tried installed on a 32-bit old PC and it worked great.
I just got a new box. It is an AMD Athlon64 3000+ CPU/motherboard.
When I put the disk in, it loaded the installation assistant
and gave me this error message almost right away:
error: 64 PCI bit len unsupported
Is there any way I can install Solaris x86 on it? Or is my
CPU not on the supported list?
Thanks
--Vincent

Pl identify which version of Oracle you are trying to install. Check the Install Guide for your version to determine the minimum hardware/software requirements.
http://www.oracle.com/technology/documentation/index.html
HTH
Srini

Similar Messages

Solaris 10 fails to install

Trying to install Solaris 10 (Latest release) on an Enterprise 4500. The install fails. The installation starts, then in lower console window, it says exitsing install and opens a terminal session. Doesn't say why it exited, just quits. Any ideas?

I'm still downloading b69 sparc, so can't say it is the release.
But have seen this before with X86 releases.
Assume this happens installing the first CD.
Does Upper left screen reports a complete installation ?
Did you see something like segmentation fault after this ?
Does the system boot in text mode, after this braek ?

Solaris 10 fails to install on Compaq ML370

Hello All,
I would like to install Solaris10 on Compaq ProLiant ML370. I've configured the machine to expect UNIX - Solaris. I see on Compaq's web that Solaris 2.6, 2.7 and 8 are supported.
Unfortunatelly, when I boot from installation DVD the setup crashes with this error:
PANIC [CPU0] /thread=fec1e1a0: BAD TRAP:TYPE=0 (+DE DIVIDE ERROR).
I am downloading Solaris 10 (11/06) to give it a try... I would appreciate any suggestions.
Thank you for your time.
DanielD

Hello All,
This issue has been addressed by setting OS to 'other' (not Solaris).
I've used smartstart cd and removed all server's configuration. Then, I've set the server for Solaris installation (The Solaris 2.6 up to 8 are supported). The bad trap error did show up again. However, when I changed the OS to 'other', I was able to start the installation process successfully.
Thank you,
Daniel

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
     at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
     at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
     at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
     at oracle.net.ca.InitialSetup.<init>(Unknown Source)
     at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000      /lib/libthread.so.1
0xfefd0000      /lib/libdl.so.1
0xfeed0000      /lib/libc.so.1
0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000      /usr/lib/libCrun.so.1
0xfee50000      /lib/libsocket.so.1
0xfedc0000      /lib/libnsl.so.1
0xfeda0000      /lib/libm.so.1
0xfeeb0000      /usr/lib/libsched.so.1
0xfe9a0000      /lib/libm.so.2
0xfed50000      /lib/libscf.so.1
0xfe980000      /lib/libdoor.so.1
0xfe960000      /lib/libuutil.so.1
0xfe940000      /lib/libmd5.so.1
0xfe920000      /lib/libmp.so.2
0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000      /usr/dt/lib/libXm.so.4
0xf0cf0000      /usr/openwin/lib/libXt.so.4
0xf0cc0000      /usr/openwin/lib/libXext.so.0
0xf1890000      /usr/openwin/lib/libXtst.so.1
0xf0c30000      /usr/openwin/lib/libX11.so.4
0xf0be0000      /usr/openwin/lib/libdps.so.5
0xf0a90000      /usr/openwin/lib/libSM.so.6
0xf0a70000      /usr/openwin/lib/libICE.so.6
0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000      /lib/libkstat.so.1
0xefc40000      /lib/libgen.so.1
0xefc20000      /lib/librt.so.1
0xefbf0000      /lib/libaio.so.1
0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1     localhost.localdomain     localhost
#192.168.100.1     bt.lan.home     bt
#192.168.100.5     jacek.lan.home     jacek
# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

Help with oracle 10g install on solaris x86

hi, i downloaded solaris 10 from oracle site (sol-10-u8-ga-x86-dvd.iso) and i have installed it on vmware. i was going through the installation guide for oracle 10 for solaris x86 and while on the pre-installation steps, i issued this command
# /bin/isainfo -kv
and it gave me
# 64-bit amd64 kernel modules
instead of
# 32-bit i386 kernel modules
as the guide expected.
please what can i do, cos the guide says if i dont see the later, the installation cannot complete.
thnx

First check you Operating System Bit information whether it is 64 or 32 bit , for this first check any of the command path
Example ls command
$ which ls
/usr/sbin/ls
$ file /usr/sbin/ls
It will show you whether your OS is 64 bit or 32 bit and accordingly download the software from below link ,if it is showing 64 bit os then you have to download 64 bit database software .
http://www.oracle.com/technetwork/database/database10g/downloads/index.html

Please suggest the fastest way to install Solaris x86 PC 30 boxes

I've already tested one and it's successfully installed.
I have to install 30 boxes , all are same spec.
Please advise the fastest procedure to install.
Note : There is no sparc machine.

Only problem with imaging a Solaris x86 box is that your machines will end up with the same hostid (which is pseudo-randomly generated at Solaris installation time for x86). This may, or may not, be a problem, depending on what commercial software you use...
To avoid this, you have to use jumpstart, or do some serious hacking.

Install Java on solaris x86

Hello - I am connected to one Solaris x86 machine remotely. It does not have GUI in it and only command line execution. I would like to install Java on this machine. Can you please provide me the link where I can get java and instructions to install it - I surfed in previous topics - But no result found
Thank you!

Java is built-in.
Or you can download a new version from java.sun.com on a different machine and then sftp it over to the Solaris box.

Install Developer 9.0.4 On solaris x86

Hi All
we have installed oracle database 10g rel2 on solaris x86 then we are trying to install oracle application server forms and reports services standalone on the same machine but we have a problem
after running ./runInstaller we have an error
./runInstaller: /export/home/cd1/disk1/install/solaris/runInstaller: cannot execute
any one can help

Hi.
I've installed it on fedora, Red Hat as 2.1 and 3.0. Here are the instructions I followed:
http://www.oracle-base.com/articles/Linux/ArticlesLinux.php
I know they're not what you're looking for but they might give you some ideas.
Cheers
Tim...

Installing Beehive on Solars x86

Hi,
I wonder if it is possible to install beehive on an x86 Solaris box. In particular I would like to install it into a zone. I understand this is currently unsupported, but is it possible?
Günther

Unfortunately, there is no Solaris x86 support for Beehive at this time. You can run the database for Beehive on Solaris x86 I believe, but the Beehive Application Tier needs to be run on Linux or Windows x86 or Solaris Sparc.
richard

Need to install ORACLE 9i on solaris x86

Hi All,
Can anyone tell me where I can get DB Oracle 9i for Solaris x86?
If not, what can I use?
Thanks.
Marfy

Unfortunately no chance. 9i was never supported on Solaris x86 and is desupported now on all other platforms. Use 10gR2 instead.
Werner

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

Solaris x86 8 bootdisk

For some reason my computer fails to boot from scsi cdrom, is there a
bootdisk for Solaris x86? I have a Tekram DC-390F SCSI adapter and
Pioneer DR-U24X CDROM-drive.

Tekram offer a driver for download - this presupposes you have a system already installed and running Solaris so that you can actually install the Tekram driver.
What Tekram have failed to implement and deliver is the "ITU" version of the driver - Install Time Update is Sun's mechanism \for allowing installation of drivers for devices which need to be bootable duringthe installation of the system - you'll see something like "F4 - use ITU floppy" along the bottom of the install screen.
Options are: complain to Tekram and ask if they've heard of ITU
or
install with IDE CD then add SCSI support after

Oracle Database 10g Release 1(10.1.0.3) for Solaris x86

I've downloaded this version of oracle to be installed on solaris x86 for version 5.10 but unfortunatly the following error has occurred:
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2006-02-15_11-16-32AM/installActions2006-02-15_11-16-32AM.log
so it is failed to install ...
please advise,,
thx alot...

from metalink:
General Notes For Oracle Database - Enterprise Edition On
Solaris Operating System x86:
Sun Solaris OS 10 Information:
o Oracle will announce certification of the following database products on the Sun Solaris 10 operating system shortly after it is announced as being generally available by Sun. This is planned for March 2005.
+ Oracle Database 9iR2 (with 9.2.0.4 Patchset) for Sun Solaris SPARC32
+ Oracle Database 9iR2 (with 9.2.0.5 Patchset) for Sun Solaris SPARC64
+ Oracle Database 10gR1 (with 10.1.0.3 Patchset) for Sun Solaris SPARC64
+ Oracle Database 10gR1 (includes 10.1.0.3 Patchset) for Sun Solaris x86
o When Oracle Database 10gR2 releases on Sun platforms later in 2005, the following releases will be certified on the Sun Solaris 10 operating system:
+ 10gR2 Database for Sun Solaris SPARC64
+ 10gR2 Database for Sun Solaris AMD64
+ 10gR2 Database for Sun Solaris x86
pasquale rago

Solaris 10 x86 failed to install

Similar Messages

Maybe you are looking for