Solaris 10 x86 goes to reboot mode after installing Sun x4 PCIe Quad card

I have an x4200 server installed with solaris 10 x86 11/06 OS. After installing the OS it comes up fine.
Now, When I install an SUN x4 PCIe Quad Gigabit Ethernet card on PCI slot 0 and on the power up server does not comes up. It gpes into the reboot mode.
bash-3.00# uname -a
SunOS server1-1 5.10 Generic_118855-33 i86pc i386 i86pc
Does any one has face this issue..

Solution found:
First tried to login using "console login" when solaris booted up, before the desktop login window appeared. Then, run command "kdmconfig", changed the video device to X86 VESA compatible device, which is from the x86 driver and porting kit for solaris, then test/save and exit. After that, reboot the system. Now it is working, not perfect though (due to my old monitor) :)-

Similar Messages

PCI-FBUS -- Dell Optiplex 760, no video after installing the NI PCI-Fbus card

I am just beginning the process of upgrading my 30+ production assembly stations currently using NI PCI-FBUS cards with new computers. (our current PCs are HP dc5100)
I want to utilize our new desktop standard PC system the Dell Optiplex 760.
When I install our existing NI PCI-FBUS cards pulled from functional old PCs and place into this new Dell PCs the PC displays no video signa during the boot process.
I have tried both of the PCI slots on the motherboard, I have upgraded the integrated Intel NIC driver. I have removed the optional dual head video card from the PCI-E slot and am now using the on-board video.
I have run out of things to swap/disable with out correcting the no video issue.
This is the first problem I have had with the new PCI-FBUS cards. They have always seem to plug and play until this new PC model.

Update . ... after swapping the NI PCI-FBUS card with several other PCs, I have determined that card to be defective. It will not start in the new PCs, the other cards I have tested will. I think this is isolated to this card only, so I will be contacting NI about repair/replacement of it.

After installing Sun Studio 11, libfsu.a in Sun Forte 6 is removed.

I have Sun compilers 5.0 and 6.2 on my Sun Solaris 8 Ultra Sparc machine. After installing Sun Studio 11, some library files (e.g., libfsu.a in Sun Forte 6) from the old compilers were removed. What is wrong with my installation?
Note that I install the different versions of compilers in separate directories.

After the 1st failed installation of Sun studio 11,
did you making sure that Sun studio 11 is not exist
on your system before re-install Sun studio 11? The
rule is you can have different Sun studio releases
on the same system, but you can not have the
multiple copy of the same release on the same
system, even though they are in a totally separate
directory. If Sun Studio 11 exist after 1st fail
installation, you need to un-install it first before
you re-start 2nd installation attemp.
Installation of Sun Studio 11 should not remove files
from older releases, but we know the case it did mess
up package of the older release before.
-NgocNo, after 1st install failed due to insufficient disk space, I did not uninstall Studio 11. After I deleted some user files to free up disk space, I run the install again, specified the same directory for installation, and just select Sun Performance Libraries. The installation seems to finished successfully. Perhaps this is one scenario where old versions can get messed up.

Process.conf file not found after installing Sun One Portal Server 6.0

This extract is from the Sun One Portal Server development guide for logging error or logs in log file. This says that to generate the log, entry should be done to enable logging in process.conf file. I could not find any such file after installing Sun One Portal Server 6.0.
Any help will be appreciated...
Reporting Errors to the Robot Log File
When problems occur, robot application functions should return an appropriate response status code (such as REQ_ABORTED), and they should also log an error inthe error log file.
To use the error-logging functionality, you must include the file log.h in thesdk/robot/include/libcs directory. After you have ensured that log.h exists in the correct place, you can use the cslog_error macro to report errors. The prototype is in the following format:
cslog_error(int n, int loglevel, char* errorMessage)
The first parameter is not currently used (may be used in the future) You can pass
this as any integer.
The second parameter is the log level. When the log level is less than or equal to the log level setting in the file process.conf, the error message is written in the robot.log.

Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

IPhone 3G goes into Recovery Mode after every restore

Every time I restore my iPhone 3G, it goes into recovery mode right after an error-less restore has been completed. Yes, I've tried using tools such as TinyUmbrella and RecBoot and iRecovery. The device was not jailbroken when I tried to update it to 4.2.1 yesterday. They all reboot the phone and just throw it back into recovery. I have no idea what to do. Searching is futile. I thought I might as well do what I almost never do and ask these communities for support.
I hope they don't disappoint.

I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
1) Download and install TinyUmbrella for your PC/Mac.
2) Make sure iTunes isn't running and connect your device via USB.
3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
4) Profit.

Solaris 3/05 no longer boots after installing 113000-07

I can't get Solaris 10 3/05 to boot anymore after installing patch 113000-7. The patch was installed by Sun's update connection software.
The computer is a Dell Dimension XPS T600 with 512MB ram.
I get the error:
Error 28: Selected item cannot fit into memory.

I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

Tour in Reboot Loop after Installing new Messenger

Hi all,
A couple of weeks ago I got a message saying there was a new version of messenger available, so of course I upgraded. After install it wanted a reboot so I did, but the phone never came back. It would start to boot for a couple of minutes but never make it to the desktop. I tried a battery pull with no change.
I ended up reloading the OS (latest Verizon 4.7 release) and all my apps and the phone was fine.
Today I got a message saying, of course, "a new version of messenger is available..." so guess what I did?!?! Yep, and bricked the phone again, it's just in a reboot loop. No error messages, it just constantly reboots without ever making it to the desktop.
I did some searching but haven't found much on this exact problem. Anybody have any ideas? I guess for now I will just avoid the new messenger as I don't really use it that much, but it would be nice if it worked.
TIA

You don't have to have it (the 5.0.0.57 version of BBMessenger) loaded, if you used it much you would see the advantages.
But, If you don't use it, don't worry.
I think there is likely some third party app conflcting with you, but that is another whole long drawn out search .
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Iphone 4s goes into recovery mode after doing the IOS 6 update.

I just tried doing the IOS6 update and after about 2hrs into it my phone goes into recovery mode. The Itunes icon appeared on the phone. When i connected it to Itunes, I tunes said i had to restore and update my phone.
BTW my son did the update in about 15 minutes i tunes says my phone will take 7 HOURS!!!
HELP!!!!

Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
I hope this will help those whos undergoing this horrifying iPhone problem.
Just additional info.
Issue: Sticked with USB & Itunes Logo during upgrade attempt to iOS 6.0
Iphone 4S (iOS 5.1.1.(9B206)
32 GB
Official Factory Unlock
PC-Win 7 Home Premium 64bit
iREB Download Link:
http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads:
Message was edited by: johnsawan79

Macbook pro goes into sleep mode after few minutes and won't wake up

Since yesterday my MB pro suddenly goes in sleep mode while working and won't wake up. After reset the MB Pro goes into Sleepmode befor I get the log in screen. After resettin SMC and PRAM I can log in but after a few minutes, againg deep sleep. I'ts not a software isue I think because when I use my MB Pro's harddrive by firewire as the startup disk on an other macbook it works fine. anyone knows about this problem?

It sounds obvious but are you sure your power adapter is ok and the battery is charged. The behaviour sounds a lot like low battery sleep.
Press the check button on your battery pack - do you get plenty of lights?

Reboot require after install the application from SCCM 2012 deployment

Hi team,
I have a application which is having 2 executable files.
1.exe and 2.exe , reboot is require after install every executable file. Please suggest me how can implement this.
Once reboot done (1st executable file installed and reboot), SCCM should start 2nd executable file.

No, because when the application will be installed it will evaluate the requirements of the deployment types in the order of the deployment type priority. The first deployment type that can install, based on its requirements, will be installed, after
that the application will be considered installed and it won't process any other deployment types.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Reboot Stuck After Installing Yosemite

After installing Yosemite I got a notification that the system would be slow while it optimizes the system. Well, after 3 hours of using it in slow motion, I rebooted. During the shutdown phase I got a blank screen with a spinning wagon wheel. It's been like this now for about an hour.
Any suggestions?

Usually, if your drive does not appear at all in Disk Utility, then it has died. What is the exact model Mac that you have? If it is pre-2011 then it cannot do full Internet Recovery. I don't know what the error message means. Are you using a default router setup or are you using your own configuration with different DNS settings? I don't know what that error means, specifically, but usually those errors indicate a connection problem. If possible try using Ethernet rather than Wi-Fi.

Mini goes into sleep mode after login on

I put my mini into sleep mode after logging out. Then, when I log back in, after a few seconds, it goes into sleep mode again. I have to re-awaken it.
This is not the way the computer should work.
Is this a configuration issue, any ideas????
I use Apple's bluetooth wireless keyboard and mouse combination.
Thanks
Mac-mini Mac OS X (10.3.9)

It sounds obvious but are you sure your power adapter is ok and the battery is charged. The behaviour sounds a lot like low battery sleep.
Press the check button on your battery pack - do you get plenty of lights?

IPod touch 1st gen goes into recovery mode after shut down or lock

Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

Welcome to Apple Discussions
Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
http://support.apple.com/kb/HT1808
As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

Transaction goes to display mode after an error message / POPUP - Urgent

Hi All,
    We have a requirement that, in the Service order transaction IW31/ IW32 in the components tab , based on the material numbers entered by the user we need to call a Popup and inform user to fill in the correct value for special stock indicator.
   I tried using the BADI Workorder_update , but within that I could not call a pop up or a message. I tried using the exit EXIT_SAPLCOMK_014 where
   in I collect the incorrect components and call a POP UP with all of them. But once I call the POP UP the IW31/IW32 screen in the background goes
   to display mode and then we are not able to change the value as per information from the POP UP. This is the same problem that we faced with the
   BADI.
Please let me know if this could be handled in any other way.
Regards,
Prabaharan.G

check with exit
Transaction Code - IW31                     Create Order
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
No of Exits:          1
Transaction Code - IW32                     CHANGE ORDER
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
No of Exits:          1
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

MacBook Pro 13 " going slower in performance after Installing LION OSX

Hey Guys ,
I had noticed some problems in my MacBook Pro 13" which I bought in the MID of 2011 ( i5 processor ) , I had purchased and installed LION OSX and observed after installing that my Backlite ( Keyboard ) dont get on when I start up at the LOG IN , which used to work in SNOW LEOPARD .
Booting takes SO SO SO long as when comapared with the previous OS .
Heating Problem is also a must to mention .
If you guys know how to reduce these problems please help me out !
Thank You .

I'm curious if you ever found a solution for this issue. I recently purchased the SanDisk Extreme II 480GB, replacing my OWC Extreme Pro 240GB. The OWC never experienced the "slow to wake" issue whereas the SanDisk drive does, consistently. To make sure I'm having the same symptoms, this is what happens to me: Put the mac to sleep (either manually or letting it do it on its own, waiting for the led to pulse showing that it is asleep), then wake it up (press a key on the keyboard), the logon screen shows almost immediately but as soon as I try to type the pinwheel/beach ball shows up, I wait between 20 and 30 seconds and then I'm able to type and all is well.
I contataced SanDisk and their support was horrible. They simply told me "contact MAC for this issue" (no joke, not "contact Apple" but "contact MAC", in all caps). I explained that it works fine with the OWC drive just not the SanDisk. They replied with another article showing that all macs have trouble waking from sleep (not true). I replied again indicating that I've never had this issue with any of my 3rd party drives, only this SanDisk. Then the replied simply stating that all mac's have issues with 3rd party hard drives when waking from sleep. At this point I threw a fit and yelled at my screen, even though it wasn't my screens fault.
In any case, their support has not been willing to do any actual troubleshooting. I'd love to return it and I might have to - but as you stated, it's annoying to have this issue but the performance is fine the rest of the time.
Thanks for any input you have.
Bryan

Solaris 10 x86 goes to reboot mode after installing Sun x4 PCIe Quad card

Similar Messages

Maybe you are looking for