Solaris 10/x86 PATA to SATA migration (how to get Sol working again?)

Hello,
due to failures in my 80G PATA drive I've bough new 80GB SATA, did:
dd if=/dev/hda of=/dev/sda
in Linux (the disk has WXP/Linuxes and Solaris installed) and after linux kernel recompilation I've been able to use at least linux on my new healthy (knocking on the wood) drive. Now, the problem seems to be that Solaris 10 stopped working. The question is where to obtain SATA drivers for my MB and how to install them to the already installed Solaris to get the installation working again?
My board is Asus A8V and SATA drive is connected to VIA VT6420 chip -- at least that's for what I'm using Linux drivers succesfuly.
Is this support already provided for Sol10?
Thanks,
Karel

I found that there was a library name /lib/ld.so.1 It appears as though this is missnamed. I created a link
ln -s /lib/ld.so.1 /lib/libld.so.1
Then I created a second link:
ln -s /lib/libld.so.1 /lib/libld.so
Everything now compiles without issue.

Similar Messages

  • TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

    I have an iPhone 3GS and was trying to restore it...
    Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
    Any ideas on how to get it working again?

    This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier.  It will now accept a SIM card only from that carrier.
    Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking.  Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

  • Satellite L450D 11X - How to get WLAN working again?

    Hello,
    I've recently had problems with my 4 year old L450D 11X machine with everything slowing up.
    I seem to have sorted this problem by reinstalling Windows 7.
    Now I can only get access to broadband via an Ethernet cable. I've downloaded the Realtek RTL802E/8103 Drivers and run them to see if that will solve the problem, but it didn't work.
    I'd be grateful for any suggestions to how I can get the wireless connection back.
    Thanks

    Thank you for your reply.
    I managed to get it working again after downloading a further Realtek Driver which was highlighted as missing in one of the systems files.
    I had tried the F8 key before but with no luck.
    I had had a problem with the machine for a couple of months and had restored factory settings a couple of times, but it kept slowing up.
    So I then got hold of another copy of the Windows 7 and that so far has worked except for the problem with the broadband access.

  • How to get safari working again?

    Safari won't open in my user name but as guest it will. I deleting some caches then my wi-fi hardware was missing, so I use my disk and reinstall lion.
    My safari won't open tried adding java no good. So some stuff from tried the different user it work. But want it to work again as in my user. I can find the com.apple.safari.plist I think I deleting it. How can I fix this.

    Oct 27, 2013 8:43 PM
    Safari won't open in my user name but as guest it will. I deleting some caches then my wi-fi hardware was missing, so I use my disk and reinstall lion.
    My safari won't open tried adding java no good. So some stuff from tried the different user it work. But want it to work again as in my user. I can find the com.apple.safari.plist I think I deleting it. How can I fix this.
    Mac desk top lion osx 10.7.5

  • Firefox 12's greyed out "reload current page" on file//sample.svg worked in 11.x. How to get it working again?

    Using Firefox 12 the icon "reload current page" works for regular web pages but does not work when I view a local svg file. ex file file:///D:/test/programming/python/svgwrite/test.svg will show the svg correctly but when I update the svg file I can no longer press the "reload current page" icon because the icon is greyed out. This worked perfectly while using Firefox 11.x. How do I get this to work like it did in Firefox 11? Thanks.

    Do the F5 or Ctrl+F5 shortcut keys work?
    You can also click the URL on the location bar to add and remove a Space or anther character and click the Go button that should appear to reload the page.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How to get CS6 working again on 10.6.8 OS

    My InDesign CS6 was working. My Creative Cloud subscription lapsed a few months ago. Today, InDesign 6 won't work. A window to subscribe to Creative Cloud pops up. I renewed my subscription and now InDesign CS6 is asking for a serial number. I don't have one. How do I go about getting InDesign 6 to work without having to upgrade my OS? Thanks.

    Try logging out of the CC Desktop app and then log back in again and let it update the subscription status.

  • My iMessaging is not working, any help as to how to get it working again?

    All of my messages are being sent to other iPhone users as texts, and the Apple system statem shows that nothing is wrong, but it's not working. Anyone else?

    Not enough info in your post to help, such as your Messages settings and whether or not you have a data connection,  Have no idea what you mean by "Apple system statem" 

  • Any suggestions how to get facetime working again?

    Face time was working but stopped working recently. Will not make connection, either side can get to the point of making a connection but then the connection fails. I have tried ichat and it works without any problem but since I am trying to get to an ipad that is not an option. The ipad has no problem with other face time connections so I have to assume something has gone wrong with my side. Can I re-install the software, is anyone else having this problem?

    You should check that their is no updates on the app that you have not installed yet, as this may be the problem.
    You can delete the app and reinstall it on the app store, in your purchased.
    Hope this helps:)

  • My Mail accounts suddenly stopped working and it shows blank Can anyone give me some advise on how to get it working again

    My mail was working up to this afternoon and all of a sudden, it is blank
    I have checked the settings and cannot understand what is wrong
    Any advise please?

    If you haven't done so, try restarting your iPad. Hold down the Sleep / Wake button until you see the red slider then swipe to power off then hold the Sleep / Wake button down until you see the Apple logo.
    If that doesn't help, tap Settings / General / Reset / Reset Network Settings.

  • My iMessage wasn't working so I turned it off under Settings and then tried to turn it back on again.  It hasn't turned back on, it just says "waiting for activation." Any ideas on how to get it working again?

    My iMessage on my iPhone wasn't working, so I turned it off under Settings and then tried to turn it back on again.  It hasn't turned back on yet.  It says, "waiting for activation.". Any ideas?

    Turn the Message App off from the Task Bar, reboot and try again.

  • I just upgraded Dreamweaver CS5 to CC - sites did not migrate - how to get my sites back?

    I just upgraded Dreamweaver CS5 to CC - sites did not migrate - how to get my sites back?
    (I'd rather not recreate them all from scratch)
    PS - Go easy on me - it's my first post in this forum .
    Thanks,
    Rob

    Seems to be different results for different people.
    My sites have usually migrated automatically whenever I have upgraded. Others report the same outcome as you.
    I've never traced the reasons for non-migration to a single root cause.

  • HT5622 My apple I'd has been disabled.  How do I get it working again.

    My apple id has been disables.  How do I get it working again?

    Here's a knowledge base article that tells you what to do:
    http://support.apple.com/kb/TS2446

  • I downloaded updates to iphoto and computer erred on install. I cannot open iphoto. I decided to reinstall iphoto from app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???

    I downloaded updates to iphoto and computer erred on install. A report went to Apple.
    I cannot open iphoto. I decided to reinstall iphoto from my app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???
    My iphoto library still exists and I don't want to lose it.

    https://discussions.apple.com/community/ilife/iphoto

  • After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.

    After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared.  I'm not sure how to get it recognized again.  Help -Sami

    Well, if you did then you may be able to track it, if you did not it's not possible.

  • My iPhone will not work in landscape mode anymore, how do i get to work again

    my iPhone will not work in landscape mode anymore, how do i get to work again??

    Double click round home button then slide icon on the bottom of screen to so you go all the way to left.  There you will see a square icon with a circle arrow .  That is the screen rotation control button.  Tap on that to lock/unlock screen rotatio

Maybe you are looking for

  • IPod is not recognized in windows

    My iPod is not recognized in either Windows 7 or iTunes.  The iPod was jail breaked and that may have an impact.  I did a reset to remove all files and now all I can do with it is view the logo on the screen.  Help.

  • My application wants to open with another application

    I have never had this problem before and can't figure out how to correct it. When I went to my Photoshop 7.0 folder to open Photoshop, I saw that that application icon was NOT the usual icon for Photoshop. This was also true for ImageReady. They appe

  • Html from flash 9 WAY different than flash MX

    Does flash 9 do something majorly different with ActiveX or something? After "publishing" a flash 9 slide show to html, it shows NO swf content in dreamweaver. Yet this show plays. Problem is, it wont align and now there is no alignment options, even

  • Portrait/Landscape: Shown incorrectly

    Hi, I have created an iBook for ipad. On my ipad, my iBook is shown correctly in landscape but incorrectly in portait mode. Is it possible to have ONE iBook with pictures, text, galleries, HTML-Code, widgets in landscape AND portrait mode? All things

  • Hiding helper applications in a Parent Controlled account

    I don't mind having helper applications run in my 5-year-olds' account. I would prefer, however, that they not see the applications. Any suggestions on how to allow the helpers to run without them being accessible to the user? Thanks, Laura