Solaris 10 x86 SunUpdateManager errors: Can't open default CCR

I have a V20z running Solaris 10 (6/06 I believe) which has been registered successfully
with the Sun Update Connection and it has, until recently, been getting and applying
patches successfully.
After the last set of patches was applied (involving a reboot), the machine has taken to
generating an error message which confuses me .
The machine is continually saying:
CNS Transport[3135]: Can't open default CCR. Be sure you are running as root.
CNS Transport[3135]: Could not send message from queue: /var/tmp/cc-transport/CCTQueueStore/store/queues/REGISTRATION/registration
Could someone please tell me what on earth could have gone wrong for this to start
happening?
David Wiseman/David Martin
UWO Computer Science

The transport is used for the optional web feature of the SunUC software. The errors you are getting could suggest a number of problems from a failure to connect to a malformed entry in the queuestore.
In the first instance i'd verify that the transport can connect -
# /usr/lib/cc-cfw/platform/transport/bin/cctrunner -p
Then review the error logs (if they exist) -
* /var/log/swupas/swupas.log
* /var/log/swupas/swupas.error.log
And if they show no problem i'd clear the existing queuestore to ensure there are no problems -
# /etc/init.d/cctransport stop
# rm -rf /var/tmp/cc-transport/*
# /etc/init.d/cctransport start
And then re-test the cctransport process can connect ok -
# /usr/lib/cc-cfw/platform/transport/bin/cctrunner -p

Similar Messages

  • Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1

    I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
    Having received the servers I had installed Oracle (ODI) product on it successfully.
    Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
    As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
    a) Modify /etc/ssh/sshd_config to comment the below line:
    #Subsystem sftp /usr/libexec/openssh/sftp-server
    b) Add below lines:
    Subsystem sftp internal-sftp
    Match Group sftponly
    ChrootDirectory %h
    X11Forwarding no
    AllowTcpForwarding no
    ForceCommand internal-sftp
    Then lastly, Restart sshd services complete the configuration
    # /etc/init.d/sshd restart
    apssvrX server current details are as below:
    apssvrX$ uname -a
    Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrX$ ssh -V
    OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
    I tried the DISPLAY variable setup as well but to no use.
    Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
    apssvrZ$ uname -a
    Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    apssvrZ$ ssh -V
    OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
    Please advise the way forward.

    Tried but still same error.
    Affected servers's sshd_config is as below:
    [root@apssvrX]# cat /etc/ssh/sshd_config
    # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
    # This is the sshd server system-wide configuration file. See
    # sshd_config(5) for more information.
    # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
    # The strategy used for options in the default sshd_config shipped with
    # OpenSSH is to specify options with their default value where
    # possible, but leave them commented. Uncommented options change a
    # default value.
    #Port 22
    Protocol 2
    Protocol 2
    #AddressFamily any
    #ListenAddress 0.0.0.0
    #ListenAddress ::
    # HostKey for protocol version 1
    #HostKey /etc/ssh/ssh_host_key
    # HostKeys for protocol version 2
    #HostKey /etc/ssh/ssh_host_rsa_key
    #HostKey /etc/ssh/ssh_host_dsa_key
    # Lifetime and size of ephemeral version 1 server key
    #KeyRegenerationInterval 1h
    #ServerKeyBits 768
    # Logging
    # obsoletes QuietMode and FascistLogging
    #SyslogFacility AUTH
    SyslogFacility AUTHPRIV
    #LogLevel INFO
    # Authentication:
    #LoginGraceTime 2m
    PermitRootLogin without-password
    #StrictModes yes
    #MaxAuthTries 6
    #RSAAuthentication yes
    #PubkeyAuthentication yes
    #AuthorizedKeysFile .ssh/authorized_keys
    # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
    #RhostsRSAAuthentication no
    # similar for protocol version 2
    #HostbasedAuthentication no
    # Change to yes if you don't trust ~/.ssh/known_hosts for
    # RhostsRSAAuthentication and HostbasedAuthentication
    #IgnoreUserKnownHosts no
    # Don't read the user's ~/.rhosts and ~/.shosts files
    #IgnoreRhosts yes
    # To disable tunneled clear text passwords, change to no here!
    #PasswordAuthentication yes
    #PermitEmptyPasswords no
    PasswordAuthentication yes
    # Change to no to disable s/key passwords
    #ChallengeResponseAuthentication yes
    ChallengeResponseAuthentication no
    # Kerberos options
    #KerberosAuthentication no
    #KerberosOrLocalPasswd yes
    #KerberosTicketCleanup yes
    #KerberosGetAFSToken no
    # GSSAPI options
    #GSSAPIAuthentication no
    GSSAPIAuthentication yes
    #GSSAPICleanupCredentials yes
    GSSAPICleanupCredentials yes
    # Set this to 'yes' to enable PAM authentication, account processing,
    # and session processing. If this is enabled, PAM authentication will
    # be allowed through the ChallengeResponseAuthentication mechanism.
    # Depending on your PAM configuration, this may bypass the setting of
    # PasswordAuthentication, PermitEmptyPasswords, and
    # "PermitRootLogin without-password". If you just want the PAM account and
    # session checks to run without PAM authentication, then enable this but set
    # ChallengeResponseAuthentication=no
    #UsePAM no
    UsePAM yes
    # Accept locale-related environment variables
    AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
    AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
    AcceptEnv LC_IDENTIFICATION LC_ALL
    #AllowTcpForwarding yes
    #GatewayPorts no
    #X11Forwarding no
    X11Forwarding yes
    #X11DisplayOffset 10
    #X11UseLocalhost yes
    #PrintMotd yes
    #PrintLastLog yes
    #TCPKeepAlive yes
    #UseLogin no
    #UsePrivilegeSeparation yes
    #PermitUserEnvironment no
    #Compression delayed
    #ClientAliveInterval 0
    #ClientAliveCountMax 3
    #ShowPatchLevel no
    #UseDNS yes
    #PidFile /var/run/sshd.pid
    #MaxStartups 10
    #PermitTunnel no
    # no default banner path
    #Banner /some/path
    # override default of no subsystems
    Subsystem sftp /usr/libexec/openssh/sftp-server
    ## Commented the sftp jailing configuration
    ##Subsystem sftp internal-sftp
    ##Match Group sftponly
    ## ChrootDirectory %h
    ## X11Forwarding no
    ## AllowTcpForwarding no
    ## ForceCommand internal-sftp

  • Error : "Can't open boot_archive"

    Hello, I am having an issue with a SUN FIRE V240 (SOLARIS 10).
    The server doesn't boot, normally , first we had a file system error (bellow) and now we have an other error message "Can't open boot_archive"
    ====================+FIRST ERROR MESSAGES+===================================================
    Unable to repair the / filesystem. Run fsck manually
    (fsck -F ufs /dev/md/rdsk/d400).
    ====================================================================================
    1) i tried to repair manually the disc with "fsck -F ufs /dev/md/rdsk/d400" , but I wasn't able to run fsck
    2) I decided to boot the server with the solaris dvd
    "boot cdrom -s" to try to repair the mirror "fsck -F ufs /dev/rdsk/c0t0d0s0" but I couldn't.
    3) So I have decided to restore the root from the most recent backup tape that I have
    4)I have mounted the root and all the other partitions from /a/etc/vfstab & /a/etc/system"
    5) I have tried to update the boot archive but it didn't work and I had this error message *"not a boot archive based Solaris instance"*
    6) Then I have reboot the server and since I see this two errors *"Can't open boot_archive" et "The file just loaded does not appear to be executable"*
    =================the error that I see everytime the server boot===============================================
    *"Can't open boot_archive" et "The file just loaded does not appear to be executable"*
    I would appreciate any help

    Have you tried to boot the system from OBP with the following command: boot -F failsafe

  • Server 280R is showing the error  can't open PAM library

    Hello Guys,
    Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
    Its very urgent

    Try searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).

  • Server0 not starting; ERROR = Can't open property file

    Hi,
    I have installed SAP EP 6.0 and it was working fine till yesterday.
    But now when I am trying to open the Portal (http://hostname:50000/irj) it says Page cannot be displayed.
    Also when I try to login to Visual Admin I get this error message:-
    Unable to lookup connection Default http://sbdep:8101/msgserver/text/logon returned empty list of connection parameters
    I restarted the EP instance (not rebooted) and the JC00 and SCS01 have started normally,but portal is till not UP.
    Have found the following details in the logs:-
    dev_jcontrol :-
    [Thr 47609482135840] *** ERROR => Can't open property file [/usr/sap/EPD/JC00/SDM/program/config/sdm_jstartup.properties] [jstartxx_mt. 1952]
    [Thr 47609482135840] *** ERROR => JStartupReadArgumentsEx: can't enumerate nodes [/usr/sap/EPD/JC00/j2ee/cluster/instance.properties:/usr/sap/EPD/JC00/SDM/program/config/sdm_jstartup.properties] (rc = -1) [jstartxx_mt. 524]
    Kindly suggest where cud be the issue and how do I proceed.
    Rgds,
    Abhijeet

    Hi,
    - I think firstly, you need to ensure following files is restored or available as per location
    1. instance.properties file
    2. sdm_jstartup.properties file
    and restart instance
    - check if any profile changes
    Regards,
    Vincent

  • Error can't open display after reboot

    Hi,
    I encounter this problem :
    I just install SSGD 4.2 on Solaris 10 01/06 T2000 server. After installation I can connect to the SSGD using browser from my notebook, and can try the various demo (dtterm, xclock etc)
    I reboot the Solaris 10 OS.
    After reboot I tried to login again via browser in my notebook and try to run the various demo.
    I can login, but almost all the demo failed to execute, the X applications give error "can't open display:" with no hostname following the error.
    The only demo still runs is the vt420 demo
    Anybody can help me to point out what causes the problem ? I am trying to demo this SSGD software to a customer.
    Regards
    Adrianus B. Kurnadi

    I've noticed this as well, under Solaris 10 FCS, Solaris 10 U1, and Solaris Express nv_39.
    However, I have tried it out under S8 02/04, and S9 09/04 and I do not have this problem after rebooting the host at all.
    For the hell of it, I (rather badly) converted the S89/S90 startup scripts to be SMF manifests with S90Tarantella having a dependancy on tS89TarantellaWebServer as I thought perhaps there was a strange issue with the tta process starting before the web service had fully started (beats me why it would matter, ends up it didn't) - as my test S10 host is a slow Netra T1.
    I'd be interested to know what the difference is between it being started up via an rc2.d script and the root user logging into the system console running /opt/tarantella/bin/tarantella start. I haven't even bothered starting to try to observe the environment differences between startup via SMF in S10 and init.d in S8.
    </2.2c>
    Andrew

  • Showing error can't open PAM library

    Hello Guys,
    Please help me to overcome this error .server is showing the error can't open the PAM library contact system administrator.i heard that i have to install one package to fix this problem that package is SUNnspr.but this package i am not getting any where from sun site .so kindly any body can help me what to do now.shall i install the os again or any other process is there.and the server is also not booting.
    Its urgent

    Try searching for SUNWnspr in your Solaris CDs / DVD. Its there. Once you find it, use pkgadd to install the package and if you have access to sunsolve, apply the latest nspr patch (I think this patch available for SunOS 5.8 in patch 119209-11, for SunOS 5.9 in patch 119211-11, for SunOS 5.10 in patch 119213-11, for SunOS 5.9_x86 in patch 119212-11, for SunOS 5.10_x86 in patch 119214-11).

  • [fvwm][main]: ERROR can't open display :1

    I can start a second xfce (session?) in a tty while I have a normal xfce session running in tty10, by logging into the tty and designating an alternative display.  example:
    $ startxfce4 -- :1
    Now I'm playing around with fvwm and trying to start it in a tty with xfce running in tty10, per the command and error below:
    $ fvwm -d :1
    [fvwm][main]: <<ERROR>> can't open display :1
    I've tried find a solution with no luck. How would I start fvwm in a tty?

    You have to start another X session.  Perhaps xfce hides this fact from you by bundling all that in the startxfce4 script, but any other window manager requires X to already be running.
    Use startx/xinit -- :1
    You can create conditional entries in your xinitrc so you could do `xinit fvwm -- :1`
    Edit: As I don't use fvwm you can test and confirm what I am suggesting by trying to start fvwm from a tty even in the default display before any other x session is running.  Calling just `fvwm` from a terminal should fail.
    Last edited by Trilby (2012-09-17 01:31:28)

  • X11 remote app and XQuartz and xterm Xt error: Can't open display: %s

    Hi
    I have Snow Leopard  (10.8.4) and XQuartz on it I need to run X11 remote app on redhat.
    On local host echo $DISPLAY shows /tmp/launch-d33HNb/org.macosforge.xquartz:0
    When i do ssh -X (or -Y) [email protected] and try to run xterm i got:
    xterm Xt error: Can't open display: %s
    xterm:  DISPLAY is not set
    the sshd_config on remote host has
    cat /etc/ssh/sshd_config | grep X11
    #X11Forwarding no
    X11Forwarding yes
    X11DisplayOffset 10
    #X11UseLocalhost yes
    Question is do i need to set up DISPLAY variable on remote host?
    If yes which display number do i choose?
    if i do export DISPLAY=<my mac ip>:10.0 or export DISPLAY=<my mac ip>:0.0
    i still have message xterm Xt error: Can't open display: %s
    Maybe this will help also
    ssh -v -v -Y [email protected]
    OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012
    debug1: Reading configuration data /etc/ssh_config
    debug1: /etc/ssh_config line 20: Applying options for *
    debug1: /etc/ssh_config line 53: Applying options for *
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to 172.20.0.12 [172.20.0.12] port 22.
    debug1: Connection established.
    debug1: permanently_set_uid: 0/0
    debug1: identity file /var/root/.ssh/id_rsa type -1
    debug1: identity file /var/root/.ssh/id_rsa-cert type -1
    debug1: identity file /var/root/.ssh/id_dsa type -1
    debug1: identity file /var/root/.ssh/id_dsa-cert type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
    debug1: match: OpenSSH_4.3 pat OpenSSH_4*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_5.9
    debug2: fd 3 setting O_NONBLOCK
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
    debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: none,[email protected],zlib
    debug2: kex_parse_kexinit: none,[email protected],zlib
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit: first_kex_follows 0
    debug2: kex_parse_kexinit: reserved 0
    debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
    debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
    debug2: kex_parse_kexinit: none,[email protected]
    debug2: kex_parse_kexinit: none,[email protected]
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit:
    debug2: kex_parse_kexinit: first_kex_follows 0
    debug2: kex_parse_kexinit: reserved 0
    debug2: mac_setup: found hmac-md5
    debug1: kex: server->client aes128-ctr hmac-md5 none
    debug2: mac_setup: found hmac-md5
    debug1: kex: client->server aes128-ctr hmac-md5 none
    debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
    debug2: dh_gen_key: priv key bits set: 110/256
    debug2: bits set: 492/1024
    debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
    debug1: Server host key: RSA 92:ac:c2:7b:1e:ba:6b:62:9b:32:3e:14:c6:87:a7:59
    debug1: Host '172.20.0.12' is known and matches the RSA host key.
    debug1: Found key in /var/root/.ssh/known_hosts:2
    debug2: bits set: 524/1024
    debug1: ssh_rsa_verify: signature correct
    debug2: kex_derive_keys
    debug2: set_newkeys: mode 1
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug2: set_newkeys: mode 0
    debug1: SSH2_MSG_NEWKEYS received
    debug1: Roaming not allowed by server
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug2: service_accept: ssh-userauth
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug2: key: /var/root/.ssh/id_rsa (0x0)
    debug2: key: /var/root/.ssh/id_dsa (0x0)
    debug1: Authentications that can continue: publickey,gssapi-with-mic,password
    debug1: Next authentication method: publickey
    debug1: Trying private key: /var/root/.ssh/id_rsa
    debug1: Trying private key: /var/root/.ssh/id_dsa
    debug2: we did not send a packet, disable method
    debug1: Next authentication method: password
    [email protected]'s password:
    debug2: we sent a password packet, wait for reply
    debug1: Authentication succeeded (password).
    Authenticated to 172.20.0.12 ([172.20.0.12]:22).
    debug1: channel 0: new [client-session]
    debug2: channel 0: send open
    debug1: Entering interactive session.
    debug2: callback start
    debug2: client_session2_setup: id 0
    debug2: fd 3 setting TCP_NODELAY
    debug2: channel 0: request pty-req confirm 1
    debug1: Sending environment.
    debug2: channel 0: request shell confirm 1
    debug2: callback done
    debug2: channel 0: open confirm rwindow 0 rmax 32768
    debug2: channel_input_status_confirm: type 99 id 0
    debug2: PTY allocation request accepted on channel 0
    debug2: channel 0: rcvd adjust 2097152
    debug2: channel_input_status_confirm: type 99 id 0
    debug2: shell request accepted on channel 0
    Last login: Thu Jun  6 09:12:43 2013 from 172.20.0.17
    [root@npecdp01 ~]#

    Jeffrey Jones2 wrote:
    I'm always looking for new tricks of the trade.
    I remember now why I originally changed the ssh config file. Here is another trick: In a text editor, type
    ssh://[email protected]
    making the obvious substitutions. Select the line and drag it to the Desktop. It will create an inetloc file that, when double-clicked, opens a Terminal window and connects to the ssh session. I have several of these in my Dock.
    That is a neat trick. However, with LaunchPad I'm not much of a Finder double-clicker anymore. What is interesting is that the OS knows how to handle the ssh protocol. You can also type "open ssh://[email protected]" for the same effect. That may not seem like much of a gain, but it reveals some interesting OS-level possibilities.
    With an RSA key, I don't even need a password
    You can use the newer DSA keys. There is another neat trick too. Pretty much every set of instructions I've seen online suggests using an empty private key password because running ssh-agent is such a hassle on Linux. It is built-in to OS X. So, on OS X, you can create more secure DSA private keys with pass phrases that are stored (and encrypted) in your keychain. You only have to supply the Then, even if someone gets your private keys, they get nothing.

  • Adobe photoshop lightroom won't install on my Mac - error can not open file

    Adobe Photoshop Lightroom4 will not install on my Mac. "Error can not open file" when trying to open will installer. If I cannot get it to work I would like to return product.

    What version of Mac OS are you using?  What is the exact name of the file which you are double clicking on?  If you right click on the file and select Get Info what does it state under the Open With section?

  • AIR 16.0 Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

    When package app with the new AIR 16.0 build 245 and ANE, the following error occur.
    ld: Error: can't open -non_global_symbols_no_strip_list file: ......aot/lib/local_nostrip.arm-air.txt

    Hi DigiCrafts,
    It seems you are doing something wrong at your end. I have used the swf and ane provided by you and I am able to create an ipa. For your reference I am pasting the command I Used.
    ~/archive_air_16.0_with_asc2_drm_sdk/bin/adt -package -target ipa-app-store -provisioning-profile <abcd.mobileprovision> -storetype pkcs12 -keystore <abcd.p12> -storepass <password> Temp.ipa app.xml ShipSim.swf -extdir /Users/abhisek/Downloads/ane-error/bin/

  • Quicktime-no sound & Broadcaster Error - Can't Open Handler (-2004)

    Greetings - I made the following post in the Tiger forum and after 3 days have received no response. Hopefully I'll have better luck here. Thanks in advance.
    10.4.7
    MacbookPro Intel Core Duo
    Suddenly some problems.
    My Fireworks 8 will no longer open. I get a Macromedia error pop-up stating "A problem was detected with your application. Please reinstall software to correct the problem."
    So I reinstall.
    Same problem! Reinstallation does not fix.
    Also, I now have no sound with Quicktime. All other system sounds are fine, DVD player, sound applications like Peak. But Quicktime is silent.
    Lastly - my Quicktime Broadcaster is no longer working.
    Video is no longer appearing in the source preview. (although I can confirm that the camera is working when I click on options for "built in iSight." I DO see video in the "Video Adjustments" window.
    Futhermore, if I click on "broadcast" I get this error "Broadcaster Error - Can't Open Handler (-2004)
    Argghhh.
    Any suggestions for me?
    Thanks!

    I doubt it is corrupt you could try to delete it but that will probably cause a problem with QT. What is the turn of events that took you to the registry?
    This is a permissions issue. What account originally installed QT? Are you an administrator account? You need to take Full Control or Ownership of the item in the registry or QT with a administrator account. Whatever account you're using, now, either is not an administrator account or it is being denied permissions. At worse I would think you might have to create another administrator account to take ownership and full control. There are at least 2 on the computer now.

  • Error can't open display while installation

    Hi,
    While installting oracle, i am unable to launch the oracle universal installer. I have already set the DISPLAY value to IPAddress.
    I am installing it from ora<sid>, it asking about xlock. When i am running it from root, i am able to open up xclock. But i am unable to open up xclock from ora<sid>. It is giving error as error: can't open display.
    Please suggest the solution.
    Regards
    Karunakar

    Hello,
    It already solved!
    What I did was:
    Open a new Term. session.
    Under root user I ran
    #xhost + *
    (this enables the X window for all users)
    Then I don´t needed to set the Display variable with the value  user within that Term. session.
    #echo $DISPLAY
    #:0.0
    ... then I test xclock to validate the display functionality and then I start oracle wizard installation with command
    #./RUNINSTALLER
    The oracle installation finish without problems! 
    Best regards,
    João Dimas - Portugal

  • Error : Can't open local data port

    Hello:
    I�d like present this problem to yours:
    I am executing two files Client/Server into my own PC, using two DOS console different, this one to Client an another to Server.
    I got this error:
    Output of the CLient (DOS Console of the client)
    C:\RUN\EX14>java AVReceive2 1.1.9.147/45300
    - Open RTP session for: addr: 1.1.9.147 port: 45300 ttl: 1
    - Waiting for RTP data to arrive...
    - Waiting for RTP data to arrive...
    - A new participant had just joined: mpalacios@mpv
    - Waiting for RTP data to arrive...
    - Waiting for RTP data to arrive...
    Output of the Server (DOS Console of the Server)
    C:\RUN\EX14>java AVTransmit2 file:/c:/run/format/au/drip.au 1.1.9.147 45300
    Track 0 is set to transmit as:
    ULAW/rtp, 8000.0 Hz, 8-bit, Mono, FrameSize=8 bits
    Error : Can't open local data port: 45300
    Well, 1.1.9.147 is the IP address of my PC.
    So, What�s the problem?
    If you need of the rest of code, please say me.
    Thanks.
    Angel.

    Well, I am agree with you, but I have this code in the Transmit File (Server):
    * Use the RTPManager API to create sessions for each media track of the processor.
    private String createTransmitter() {
         // Cheated. Should have checked the type.
         PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
         PushBufferStream pbss[] = pbds.getStreams();
         rtpMgrs = new RTPManager[pbss.length];
         SessionAddress localAddr, destAddr;
         InetAddress ipAddr;
         SendStream sendStream;
         int port;
         SourceDescription srcDesList[];
         for (int i = 0; i < pbss.length; i++) {
         try {
              rtpMgrs[i] = RTPManager.newInstance();     
    //The local session address will be created on the
    // same port as the the target port. This is necessary
    // if you use AVTransmit2 in conjunction with JMStudio.
    // JMStudio assumes - in a unicast session - that the
    // transmitter transmits from the same port it is receiving
    // on and sends RTCP Receiver Reports back to this port of
    // the transmitting host.
              port = portBase + 2*i;
              ipAddr = InetAddress.getByName(ipAddress);
              localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                       port);
              destAddr = new SessionAddress( ipAddr,
                                  port);
              rtpMgrs.initialize( localAddr);
              rtpMgrs[i].addTarget( destAddr);
              System.err.println( "Created RTP session: " + ipAddress + " " + port);
              sendStream = rtpMgrs[i].createSendStream(dataOutput, i);          
              sendStream.start();
         } catch (Exception e) {
              return e.getMessage();
         return null;
    When I use this Files (Client/Server), between diffrent PCs into LAN, eg, Client (One PC) and Server (Another PC), but I used:
    This One PC: (IP Address PC = 1.1.9.150)
    C:\run\ex14\java AVTransmit2 file:/c:/run/format/audrip.au 1.1.9.147 45300
    Another PC:(IP Address PC = 1.1.9.147)
    C:\run\ex14\java AVReceive2 1.1.9.147/45300
    That�s work right!
    So, what�s happen?

  • Error: Can't open display: localhost:0.0

    Hi all,
    Please help to solve the problem of x display, thanks a lot!
    $DISPLAY=localhost:0.0; export DISPLAY
    $xhost +sky
    xhost: unable to open display "localhost:0.0"
    $xclock
    Error: Can't open display: localhost:0.0
    Vivia/en

    reboot
    or
    using xmanager tool

Maybe you are looking for

  • Characteristic Relationship in IP

    Hi All, I have a database table(SE11) which has 4 fields (3 key fields + 1 Data Field). I want to derive the 4th field based on the other 3 key fields in my IP. For that I need to write a Characteristics Relationship exit. my query is where do i need

  • How to use Stored Procedure Call in Sender JDBC adapter

    Hi All,          Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter? Xier

  • Standard text changes to italicized  text

    I'm using Adobe Acrobat 6.0 Professional Version 6.0.6 in XP Pro. While entering text using the Text Box Tool, the text I'm entering will suddenly change from normal text to italicized text. Does anyone know why this happens ? Is there a way to desel

  • Emails via my Mobile - N95-3

    I have recently set up to receive Emails on my mobile. The message I rec'd today was "There's one more step to complete the setup of Emails on my mobile". Follow the following steps:- Messages>MyEmail>Send/Receive How/Where do I find this procedure ?

  • "atos needs to take control of another process for debugging to continue" ??

    Hi, I just updated to Yosemite, I am using SketchUp Pro and got a scary pop up from "Atos" saying : atos needs to take control of another process for debugging to continue. Type your password to allow this". What do I need to do. I need to use Sketch