Solaris 10x86 fdisk Active partions for Raid 1

Purchased X2270 with 1TB internal disk (c1t0d0). Layed out partitions during completion of Soalris 10x86 install. fdisk shows a Diagnotstic partion of 4 cylinders (starting at cyl 1) and the remaining partition is an ACTIVE Solaris2 partition (starting at cyl 5) for 60790 cylinders. Bought a 2nd 1TB internal disk. Reconfig booted after installing 2nd disk and format sees it - c1t1d0 and fdisk shows NO partions on this disk. My question - I'm going to mirror 1st disk to 2nd for all Solaris partitions for high availability. I know I have to fdisk 2nd disk before I can create like partions as are on 1st disk. Should I create 1 Solaris2 fdisk partition on 2nd disk starting at cyl 5 for same 60790 cylinders and leave the 1st 4 cylinders unused do to no Diagnotic partion on the new disk?
Also, Should the new Solaris2 fdisk partition on new disk be Activated or can only 1 Solaris2 fdisk partion be active on a 10x86 system at any given time (given if I'm going to mirrror the "/" ufs partion between both disks)?

abrante,
Thanks for the quick reply. I went ahead and fdisk-ed the 2nd drive and made it the ACTIVE partition so I guess you need 1 ACTIVE fdisk partition per disk. I also followed your advice and made fdisk partition start at cylinder 5 just like 1st disk and then formatted it same way as 1st disk and went ahead and setup mirrors OK. Everything is working! I found a sun doc - 819-2789 for x86 that had steps to Raid-1 root that I followed to the "T" without trouble. The other partitions were standard mirroring steps I've used with SPARC boxes.
Thansk for the help!
Dino

Similar Messages

Solaris 8 on intel is for the Birds

Okay ... I have been trying for 4 days.....This chronicles the last one
Backed up my system....fdisk'd all drives...here's a rundown....
AMD K6-2 450
98M ram
primary master: hd 1 - seagate 4.0gb
primary slave: hd 2 - samsung 2.0gb
secondary master: hd 3 - maxtor 13.0 gb
secondary slave: e-ide cd rom 54x
sound: sb16 (creative labs)
video: Ati (All-in-wonder pci 8 mb)
nic: Netgear FA310TX
modem: USR 33.6 INTERNAL (COM 4)
mouse: Serail Trackball - 2 button com1
keyb: disposable at connector with the useless
microshaft keys
This time, I will go through it all again...keeping notes in
notepad on my laptop so I can post better details...
(FWIW, I MADE SURE TO UPGRADE TO THE LATEST BIOS)
So, I start....learning to start from power off
(from reading other posts...)
power on...btw this one has no partitions on any disk...
Solaris Device Configuration Assitant
F2 - I continue
Driver list built...F2 - I continue
load com.bef, ata.bef
I select the cd with the 'Webstop Install cd' and F2 to continue
Configuring /dev /devices
Using RPC Bootparams for network configuration information.
English selected...
Start the Web Start....
Searching hd's
'No disks that meet the criteria in the Solaris
installer documentation found.
Please check the system or try another installation option'
Note: The doc's say nothing about having pre-partitioned hd's!
But if anything, I am persistent...
Boot to Red Hat linux 5.2 just to use fdisk....
fdisk on first hd -
n (new)
Partition number? 1
First Cylinder? 1
size? +512M
t (to change type)
Partition number? 1
type ? 82 (linux swap)
a (to toggle bootable)
partition number? 1
w (write changes)
3 finger salute to release the cd
and put in Solaris WebStop
power off 15 seconds...
power on
this is all the same...will cut and paste from above:
Solaris Device Configuration Assitant
F2 - I continue
Driver list built...F2 - I continue
load com.bef, ata.bef
I select the cd with the 'Webstop Install cd' and F2 to continue
Configuring /dev /devices
Using RPC Bootparams for network configuration information.
English selected...
Start the Web Start....
Searching hd's
Wow...something new...
'Installer needs to fdisk root disk c0d0
In order for the Sol. Install to oper correctly a
swap slice also needs to be placed on the disk.
this slice needs to be at least 384 Megabytes.
May the Solaris Installer fdisk (translate HOSE the root disk
c0d0?
Sure...I'm a glutten for punishment...
WARNING: ALL INFORAMTION ON THE SOLARIS FDISK PARTITION WILL BE ERASED!
Is this OK?
No, but what the hell. I hit y<enter>
Enter a swap slice size between 384MB and 4096MB, default = 512MB [?]
I accept 512MB, for fear of changing ANY defaults...
Can the swap slice start at the beginning of the disk?
Whatever... y <enter>
Disk Slice : /dev/dsk/c0d0
Size : 512 MB
Start Cyl : 3
WARNING: ALL INFORMATION ON THE DISK WILL BE ERASED!
Is this ok?
again, whatever you want, Hail Solaris Installer...
y <enter>
The Solaris Installer will use disk slice /dev/dsk/c0d0s1
please wait....
Copying mini-root to local disk.-\|/-\|/-\|/- (gotta add the animation :> )
after a fair amount of HD Grindage...
Copying platform specific files
It's almost ready...
enter to reboot (and remove cd...change cmos back to boot from hd's...)
(Because of notes on how Solaris can be persnickety, I power down....)
boot manager:
PART# Status Type Start Length
1 Active X86_BOOT 945 20480
2 SOLARIS 22370 9399470
3 <unused>
4 <unused>
we timeout on 1....(if it aint broke, don't fix it...)
'Configuring devices...'
'Configuring /dev /devices'
'Using RPC Bootparams for network configuration information.'
Okay, let's id devices...F2 to continue
(we'll try and skip this later...for now...)
F2

this time selected CDE before logging on
go wall paper, and help viewer....
dthle...something said it was generating something before it locked up
45 seconds later rebooted....
I'm fed up!!!
This is ridiculous. Sketchy doc's at best! Is this a BETA? Maybe pre-beta?
Does anyone know how to get in touch with someone at management?
I know, for 200 clams, I can send an email....
it's not that I don't have a clue...I do.
I thought, OK, I will move from Linux to Solaris for develepment work....yeah right.
I am not new to this game. In the past I have been able to set up multiple os's on
my system:
dos 5
dos 6
dos 6 w/ win 3.1
win 95
win 98
win nt
RH linux 5.2
RH linux 6.2
All PEACEFULLY co-existing. This is not possible. I am very disappointed!!!
Back to open source....at least that runs. It doesn't lock up, reboot, core dump,
fruit.
Any one else have opinions, let's have 'em.
Doug
[email protected]

Problem with installation oracle application server 10g on Solaris 10x86

Hello all.
Help me, please.
I'm trying to install Oracle aplication server 10.0.1.2.0.2 on solaris 10x86.
When i install oracle infrastructure(metadata repository and identify management),
i have a problem - on step "Configuration Assistants", where assistants will confugure and start the components, "Single-Sign On Configuration Assistant" -Failed
(Details:....
Finished executing the call.Child Process has exited.
SSO Configuration Assistant failed.
Configuration assistant "Single Sign-On Configuration Assistant" failed
Anybody know, how solve this problem?
Sorry for my english.

Hi.
Now
/etc/hosts
127.0.0.1 localhost
82.179.1.1 testoracle loghost
/etc/resolv.conf
domain kemsu.ru
nameserver 82.179.1.5
Or must be in /etc/hosts/
82.179.1.1 testoracle.kemsu.ru loghost
You about this?

Solaris 10x86 06/06 HP DL585 G1 with Grub issues.

Hello,
I'm trying to understand why Solaris 10x86 06/06 hang just after grub on HP DL585 G1!
If I add the option "-v" (kernel /platform/i86pc/multiboot -v) then the system will boot up and work fine, without error on screen (Is there a way to redirect the screen output in a file?).
I tryed to disable ACPI (as I read previous post but without success),
My question will be why the option "-v" make the system boot up ? is there a better way to sort it out?
Thx

Durring the install process I have already the last HP driver, which was a issue.
http://h18023.www1.hp.com/support/files/server/us/download/24869.html
This would not be a solution because it's already done.
Thanks for your help
rno

WebStack 1.5 - Apache stops responding - Solaris 10x86 Zone

I've got a Solaris 10x86 installation with multiple zones. Webstack is installed in the global but only one zone is using the Apache as a generic web server. Other zones are quite happy and fast (could mail servers, simple ftp server).
The web server however is driving me nuts. It simply stops responding for no apparent reason. Nothing in the apache logs, error, virtual hosts, nothing in the system logs. It just sits there when you are using one of the websites until you stop and restart it.
I thought perhaps this was a memory issue, but we added more memory to the box and it acts the same. I would expect to see some sort of error but none are displayed.
I currently have a script that connects to a site on a regular basis to see if it is still responding and if not, restarts the Apache server (includes MySQL as well), but I am at a loss why this is doing this.
The previous box was very old and used Xampp instead (very very old) and never had this problem.
If I can't get this to stabilize, I will have to put something else on it (Xampp again perhaps?)..
Anyone else see this before or have any suggestions. BTW Truss on the master pid of the Apache doesn't really show anything interesting.

Seems I found the reason....
http://sysadminsjourney.com/content/2009/09/01/apache-2212-2213-and-solaris-10-bug-nastiness
Don't know for sure as the article doesn't state if it was Sparc or x86, but it sure sounds like it. This is older software so getting a fix appears to not be favorable. I really can't rebuild the system until after the first of the year.
No idea if the person mentioned (Jeff Trawick ), would still have the work around .so file.
Sad that many of the Sun links are gone or redirected into Oracle neverland...

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Create an Activity Report for Current Week

I would like to create a activity report for the current week. The trick is that if the weekday is Wednesday or earlier (Sunday being the first day of the week), the report shows last week's activities; but if the weekday is Thursday or later (Saturday being the last day of the week), the report shows the current weeks activities.
I have a filter that works in Access but does not seem to work in Siebel. It does just what I explained above:
Between CDate(Int((IIf(Weekday(Now())<=4,Now()-(6+Weekday(Now())),Now()-(Weekday(Now())-1))))) And CDate(Int((IIf(Weekday(Now())<=4,Now()-Weekday(Now()),Now()+(7-Weekday(Now()))))))
Thank you,
David
Edited by: DavidE on Oct 7, 2008 4:17 PM

David,
try this:
case DAYOFWEEK(CAST(Activity."Planned Start Time" AS date))when 1 then timestampadd(sql_tsi_day,1,CAST(Activity."Planned Start Time" AS date)) when 3 then timestampadd(sql_tsi_day,-1,CAST(Activity."Planned Start Time" AS date)) when 4 then timestampadd(sql_tsi_day,-2,CAST(Activity."Planned Start Time" AS date)) when 5 then timestampadd(sql_tsi_day,-3,CAST(Activity."Planned Start Time" AS date)) when 6 then timestampadd(sql_tsi_day,-4,CAST(Activity."Planned Start Time" AS date)) when 7 then timestampadd(sql_tsi_day,-5,CAST(Activity."Planned Start Time" AS date)) else CAST(Activity."Planned Start Time" AS date) end
This gave me the sunday of the week. You should be able to modify this format for your purposes.
cheers
Alex

Creating Activity object for a Service Request object...

[This thread was migrated from the On Demand Developer Forum in the old Siebel Community] 
drangineni
New Contributor
Ho do we use Activity object of a Service Request object. I am trying to
create an Activity object for a existing Service Request object.
I am looking for some sample code.
I greatly appreciate your help.
Product: CRM OnDemand
11-26-2006 12:40 PM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
drangineni, What programming language are you using?
BS
12-04-2006 10:56 AM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Hi, I am using C# .
12-04-2006 07:40 PM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
drangineni, assuming you know the service requestid or externalId of the
Sr you are dealin gwith you would first set that value.
ServiceRequest1[] objSRList =new ServiceRequest1[1];
objSRList[0] = new ServiceRequest1();
objSRList[0].ServiceRequestId = <YourSRId>;
Then you create an array of activities and initialize the first one:
objSRList[0].ListOfActivity = new Activity[1];
objSRList[0].ListOfActivity[0] = new Activity();
Now set the data fields
objSRList[0].ListOfActivity[0].Subject ="My Subject";
objSRList[0].ListOfActivity[0].Description ="My Description";
objSRList[0].ListOfActivity[0].Display = "Task"; //valid values are either
"Task" or "Appointment"
Then call the ServiceREquestInsertOrUpdate method on the ServiceRequest
WebService and pass in the above variable.
BS
12-06-2006 12:36 PM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Thank you BigSlick.
The following error is thrown when I use the
ServiceRequestInsertOrUpdate(objInput)
"No user key can be used for the Integration Component instance 'Service 
Request_Action'.(SBL-EAI-04397)"
When I use the prxySrvcRequest.ServiceRequestInsert(objInput), no error is
thrown and the Activity gets added, but a new Service Request object is
created, but the Activity gets added to an existing Service Request
object. I greatly appreciate your help.
The following is the code:
int ActivityLength = 0;
WSOD_ServiceRequest.ServiceRequest1[] ServiceRequest = new
WSOD_ServiceRequest.ServiceRequest1[1];
ServiceRequest[0] = new WSOD_ServiceRequest.ServiceRequest1();
ServiceRequest[0].ServiceRequestId = this.Request.QueryString["id"];
ServiceRequest[0].ListOfActivity = new
WebSelfService.WSOD_ServiceRequest.Activity[ActivityLength + 1];
ServiceRequest[0].ListOfActivity[0] = new WSOD_ServiceRequest.Activity();
ServiceRequest[0].ListOfActivity[ActivityLength].Description =
this.txtDescription.Text;
ServiceRequest[0].ListOfActivity[ActivityLength].Display = "Task";
ServiceRequest[0].ListOfActivity[ActivityLength].Subject = "My Subject";
WSOD_ServiceRequest.ServiceRequest prxySrvcRequest = new
WebSelfService.WSOD_ServiceRequest.ServiceRequest();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input
objInput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output
objOutput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output();
objInput.ListOfServiceRequest = ServiceRequest;
Session objSession;
objSession = (Session) Application["Session"];
prxySrvcRequest.Url = objSession.GetURL();
try
objOutput = prxySrvcRequest.ServiceRequestInsertOrUpdate(objInput);
catch(Exception e)
12-09-2006 09:53 AM
Re: Creating Activity object for a Service Request object...
drangineni
New Contributor
Thank you BigSlick.
The following error is thrown when I use the
ServiceRequestInsertOrUpdate(objInput)
"No user key can be used for the Integration Component instance 'Service 
Request_Action'.(SBL-EAI-04397)"
When I use the prxySrvcRequest.ServiceRequestInsert(objInput), no error is
thrown and the Activity gets added, but a new Service Request object is
created, but the Activity gets added to an existing Service Request
object. I greatly appreciate your help.
The following is the code:
int ActivityLength = 0;
WSOD_ServiceRequest.ServiceRequest1[] ServiceRequest = new
WSOD_ServiceRequest.ServiceRequest1[1];
ServiceRequest[0] = new WSOD_ServiceRequest.ServiceRequest1();
ServiceRequest[0].ServiceRequestId = this.Request.QueryString["id"];
ServiceRequest[0].ListOfActivity = new
WebSelfService.WSOD_ServiceRequest.Activity[ActivityLength + 1];
ServiceRequest[0].ListOfActivity[0] = new WSOD_ServiceRequest.Activity();
ServiceRequest[0].ListOfActivity[ActivityLength].Description =
this.txtDescription.Text;
ServiceRequest[0].ListOfActivity[ActivityLength].Display = "Task";
ServiceRequest[0].ListOfActivity[ActivityLength].Subject = "My Subject";
WSOD_ServiceRequest.ServiceRequest prxySrvcRequest = new
WebSelfService.WSOD_ServiceRequest.ServiceRequest();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input
objInput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Input();
WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output
objOutput = new
WebSelfService.WSOD_ServiceRequest.ServiceRequestWS_ServiceRequestInsertOrUpdate_Output();
objInput.ListOfServiceRequest = ServiceRequest;
Session objSession;
objSession = (Session) Application["Session"];
prxySrvcRequest.Url = objSession.GetURL();
try
objOutput = prxySrvcRequest.ServiceRequestInsertOrUpdate(objInput);
catch(Exception e)
12-10-2006 08:49 AM
Re: Creating Activity object for a Service Request object...
BigSlick
Valued Contributor
Ah yes, I forgot you also need to specify a unquie Id for the activity.
It's kinda strange.
Try adding this:
ServiceRequest[0].ListOfActivity[ActivityLength].ActivityId = "DummyId";
//OD will overwrite this with a real Id
Or if you have a unquie ID for your Activities you can use:
ServiceRequest[0].ListOfActivity[ActivityLength].ExternalSystemId = <Your
Unique Value>;
Hope that helps,
BS
12-11-2006 10:52 AM
Re: Creating Activity object for a Service Request object...
surgientweb
New Contributor
Hi all,
I have a similar problem, but mine is returning a message that field
"Display" is required. Looking at this post and the documentation it is
obvious that Display is a required field, but my WSDL did not include a
field called "Display", so my proxy did not generate one.
I tried adding a field called Display to the WSDL and the proxy class, but
I get a different error... I figure I maybe cannot add it manually like
that - but I think the bigger problem is it is not part of the WSDL that
Siebel OD generates for me in my admin account.
On top of that Display is not shown in the list of fields for Activity
through the admin interface.. is it possible my account is bugged? Am I
missing something simple here? BigSlick, I see you mention a .Display in
your code sample so I thought you might understand what is wrong. Here is
my code (I am trying to add a activity to a lead).
Thanks for any insight into this!
private void InsertLeadActivity(Session session, NameValueCollection data,
string leadID)
try
if (blnDebug)
Response.Write("Setting up Activity ";
// instantiate the proxy service
Activity_Service.Activity activityProxy = new Activity_Service.Activity();
// set up the target URL
activityProxy.Url = session.GetURL();
activityProxy.CookieContainer = session.GetCookieContainer();
// set up input argument
ActivityNWS_Activity_Insert_Input input = new
ActivityNWS_Activity_Insert_Input();
input.ListOfActivity = new Activity1[1];
input.ListOfActivity[0] = new Activity1();
if (blnDebug)
Response.Write("Getting Data ";
// dg note: name value
// input.ListOfActivity[0].MrMrs = data["MrMrs"];
input.ListOfActivity[0].LeadId = leadID.ToString();
input.ListOfActivity[0].Description = DataToString(data);
input.ListOfActivity[0].Subject = "Website Submission Activity";
input.ListOfActivity[0].Priority = "3-Low";
//input.ListOfActivity[0].DueDate =
DateTime.Now.AddDays(7).ToShortDateString();
input.ListOfActivity[0].Owner = this.defaultLeadOwner;
input.ListOfActivity[0].Type = "Call";
//input.ListOfActivity[0].Display = "Task";
input.ListOfActivity[0].ActivityId = "DummyId";
input.ListOfActivity[0].ExternalSystemId = "web";
activityProxy.Activity_Insert(input);
catch (Exception exInsertActivity1)
if (blnDebug)
Response.Write(" Error inserting activity. " +
exInsertActivity1.ToString() + " ";
01-06-2007 05:05 PM
Re: Creating Activity object for a Service Request object...
surgientweb
New Contributor
Figured it out.. the field "Display" is also known as "Activity"........
Here are some notes for other people.. good luck and feel free to write me
at raskawa-at-gmail-com if you want a code sample.
Some unpublished nice to knows for Siebel On Demand Activities....
In summary:
- .Activity is also known as Display in documentation and on the error
messages coming back from the WS. Also, it appears based on these boards
some people actually have a .Display field. Maybe different accounts
generate different WSDL's.... buggy.
- If a error message is thrown saying "Description is required" it really
means "Subject is required" (make sure .Subject has a value)
- If a error message is thrown complaining that ActionType is not right..
that is really .Type.. make sure it's lookup value is valid for the
dropdown values in your CRM OD system.
My code/values that worked..
input.ListOfActivity[0].LeadId = leadID.ToString();
input.ListOfActivity[0].Description = DataToString(data);
input.ListOfActivity[0].Subject = "Website Submission Activity";
input.ListOfActivity[0].Priority = "3-Low";
//input.ListOfActivity[0].DueDate =
DateTime.Now.AddDays(7).ToShortDateString();
input.ListOfActivity[0].Owner = this.defaultLeadOwner;
input.ListOfActivity[0].Type = "Call";
input.ListOfActivity[0].ActivityId = "DummyId";
input.ListOfActivity[0].ExternalSystemId = "web";
//input.ListOfActivity[0].Display = "Task"; //doesn't work
input.ListOfActivity[0].Activity = "Task"; //does work.
01-06-2007 05:17 PM
Re: Creating Activity object for a Service Request object...
raskawa
First Time Contributor
Hi,
This is surgientweb (under my own login now..)
Anyway, I wanted to add that I figured out that there are two ways to add
a Activity to a Lead. Via the Lead object (by getting a ListOfActivities)
OR by creating a Activity directly and just adding your "LeadID" to it (or
you can also add a "ContactID" to relate the activity to a Contact.)
Feel free to email me for a code example (raskawa....at....gmail)
-David
01-09-2007 02:58 PM

Hi Stephane,
You can definitely read the categories using Tables in CRM. The logic is a bit complicated though.
Use the following steps to retrieve Categories using Std. CRM Tables:
1. Pass transaction GUID in field GUID of table CRMV_REPORT_SUBJ and get KATALOGART, CODEGRUPPE and CODE field values in lv_catalog, lv_codegrp and lv_code.
2. Now you need to concatenate these 3 fields values carefully like this:
CONCATENATE lv_catelog lv_codegrp ' ' lv_code into lv_category1.
Remember there are 4 spaces between lv_codegrp and lv_code.
3. Now pass this lv_category1 in field OBJEXT in table CRMC_ERMS_CAT_OK and get OBJGUID in field lv_objguid.
4. Pass this lv_objguid in field OBJ_GUID and LNK_TYPE = 'IS_CODE' in table CRMC_ERMS_CAT_LN and get value of CAT_GUID in lv_cat_guid.
5. Pass this lv_cat_guid in field CAT_GUID in table CRMC_ERMS_CAT_CA and get value of CAT_ID in field lv_cat_text.
Remember this lv_cat_text is the text value of your last level of category of transaction.
6. To get its upper cateogry level value, simply use table CRMC_ERMS_CAT_HI and get parent guid value and pass this as CAT_GUID again in table CRMC_ERMS_CAT_CA to get its text.
Alternatively, you can also use class method cl_crm_ml_category_util=>get_parse_all to get all levels of categories.
Hope this helps.
Thanks
Vishal

Training and event management - Internal Activity Allocation for Attendees(PV18)

Dear all,
I run the PV18 transaction (Internal Activity Allocation for Attendees). Lets imagine that I successfully allocated 1000 EUR in the CO module. Then I realize that it was a mistake, and I want to correct this by sending -1000 EUR to CO.
My question is: how can I do that? Is PV18 capable of doing this? Or this has to be corrected manually in CO module?
Thanks
Nándor

>>I tried to create it and the system generated a message about using the allowed name space.
if it is a warning message, I think, you can go ahead & create the HRTEM entry in TTYP table.. you can check if this will let you get past the Activity Allocation.
~Suresh

How can I tell if HD is set up for RAID?

I received an external Western Digital 4TB drive with some files on it and I'm trying to tell if the drive is already set up for RAID or not. The company I received it from couldn't tell me and according to the WD box, it's "pre-configured for maximum capacity (RAID 0)". However, when I go into Disk Utility to view the drive, it says the capacity is only 1.8T.
I little more detail... In Disk Utility the left window shows the drive named, "1.8 TB WD My Book Media". Total capacity 1.8TB
S.M.A.R.T. Status: Not Supported
Partition Map Scheme: GUID Partition Table
...In the Partition window it looks like a single partition. Again, Size: 1.8 TB, Available space: 1.1 TB.
Does this make sense? Sorry, I'm not familiar with RAID drives and how they're set up and used. Any help with this would be greatly appreciated.
I'm just trying to find if this drive is in fact set up as a RAID drive and if so, is it mirroring to the second drive in the enclosure? or not? And if not why does it say that the drive is only 1.8 TB?
Sorry for the rambling.
Thanks.

There is no such thing as a "RAID" drive. Any drive can be used in a RAID array. A single drive is not a RAID drive. It is simply a single drive. When multiple drives are combined into an array via software and/or hardware then one has a RAID array.
Now as far as I can determine WD does not make a single drive larger than 2 TBs. Formatted the drives will contain roughly 1.8 TBs. WD does make a My Book version that has two 2 TB drives that can be configured into a striped RAID array that will provide 4 TBs of storage. I don't know if the product is pre-configured as a RAID array or if you must configure it as such using Disk Utility. For the latter you must first partition and format each drive then use the RAID tab option of DU to set up the RAID array. Select Disk Utility Help from the DU Help menu and search for "raid" to get the help articles on how to set up striped or mirrored RAIDs.

How can I get a list of active savepoints for the current session?

Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"
So how can I get a list of active savepoints for the current session?
Could you please also let me know if there is any better way to debug this issue.
Appreciate any quick response as the issue is very critical.
Thanks,
Soma

user776523 wrote:
Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"It sounds like there's an execution path in the code where the SAVEPOINT is never issued.
There is no way to get a list of active savepoints. Is this your code or a "canned" procedure? If it is your code you can go through the code looking for answers, possibly tracing execution using DBMS_OUTPUT.PUT_LINE or writing messages to a log table. If its a "canned" procedure you may need to open an SR with Oracle

Third-Party Licensing and Activation Toolkit for Labview 8.5

There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
Solved!
Go to Solution.

I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

GL account linkage with activity group for AVC- Funds management

Hi,
I have activated (BCS) funds management in my system. My client wants that system will give error message for some expense GL accounts and for other expense GL accounts it will only give information message.
For that i have created new activity group for AVC but i have no idea how we can link GL accounts with activity group for AVC.
Request immediate help.
Thanks in advance.
Manisha

Hi,
The correct way to deal with this is not with activity groups, but with tolerance profiles. Create tolerance profiles with error and warning messages accordingly and then create a tolerance derivation strategy, which on the basis of commitment item, will derive the relevant profile.
Regards,
Eli

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Solaris 10x86 fdisk Active partions for Raid 1

Similar Messages

Maybe you are looking for