Solaris 11.1 Application Problem

I had previously used the Live Media (ver 11) and understood that any change made would not be saved and so I installed 11 Automated Install, erverything went fine and I then installled GDM and and that went ok. My problem is that I cannot even get the zipped file to stay in the tmp folder, I have tried twice and after rebooting each time the unzipped files have disappeared. Is this because of the GDM? I have not tried ftp and install from the console yet.
Solariss 11.1 is running under VMware Player on a x64 machine.

Solaris has always by default emptied out /tmp at reboot. That is the nature of the "temporary" area. /var/tmp is persistent through reboots, so can be used instead if you want a file to stay around after rebooting.
-- Alan

Similar Messages

Solaris 6 binary on Solaris 8 ( Multithreaded application.)

I have to explore further, but I like to know whether any of you have faced similar problem.
We have multithreaded server. A thread in detached mode will be created to serve each new connection. The binary was compiled on 32bit solaris environment and it was running fine on solaris 6 machines.
Recently we switched to Solaris 8 machines. We used the same binary that was compiled on solaris 6. One problem I am noticing is some of the threads are idle and are alive for 3-4 days. We have timeouts enforced between successive transactions, inspite of that threads are alive for longer duration. We use "poll".
Do you see any problem in Solaris 8 w.r.t Poll/Select syscall or Detached threads ( we use POSIX APIs) that were compiled on Solaris 6 ?.
I would also like to give anyother information that would help you in identifying the problem.
Thanks
Mega

we have ported our product to solaris 5.7 from solaris5.6. With this version we are unable to install the product on solaris 5.6. It is unable to find the following libraries in 5.6, while installing and finally it is failing.
libMrm.so.4
libXm.so.4
libgen.so.3
Is there any way to make my product work on both versions of solaris?

Premiere Elements 12: start application problem - an incompatible display driver massage

Premiere Elements 12: start application problem - "an incompatible display driver" massage
I did everything what I could find online forums. (Except messing with BIOS settings)
- Updated video cards drivers
- Set to “High-Performance GPU” in Catalasyt for application exe and gpusniff.exe
- Added “run as administrator” privileges
- Each time before trying to run the application I removed BadDriver.txt file
My laptop specification:
Product name: HP Pavilion dv6 Notebook PC
Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
System memory: 8GB
Memory slot 1: 4GB SODIMM Samsung 1333MHz
Memory slot 2: 4GB SODIMM Samsung 1333MHz
Windows 7 Professional 64-bit Service Pack 1
Intel(R) HD Graphics Family 8.882.2.3000 (30/09/2011)
Radeon (TM) HD 6770M 8.882.2.3000 (30/09/2011) (newer updates are not available)
please help...

cmbishop82
Did you go through the drill
a. video card driver version up to date according to the manufacturer of the video card
b. if so, deletion of the BadDrivers.txt file....for Premiere Elements 12 in Windows 7, 8, or 8.1 64 bit, the path is:
Local Disk C
Program Data
Adobe
Premiere Elements
and in the Premiere Elements Folder is the BadDrivers.txt file for version 12. The BadDrivers.txt file is a file in this Premiere Elements Folder which also contains folders. You do not want anything in those folders. All you want is the BadDrivers.txt file in the Premiere Elements Folder.
Make sure that you have Folder Option Show Hidden Files, Folders, and Drives active so you can see that complete path.
The rationale for the being of the BadDrivers.txt file has its origins in post 10 of the following older thread
http://forums.adobe.com/message/3177024
When you get the display card error message, is it before you import media into the project? And, when you get the message, does the program allow you to continue by pressing a Continue Button or are you stopped from going further?
ATR

N82 application problems

Hello everyone. I bought N82 a few days ago and I have an application problems. My installed applications works for 6-7 hours. I can see them in applications folder and application manager. But 7 hours later, I can't see them in applications folder also application manager. Why it happens? Please help me!
I tried those but I can't solved this problem:
Soft format
Hard format
Reinstall N82's software ( V31) with Nokia Software Updater
Formatting memory card and reinstall applications.
Note: I don't have this problem with my videos and musics .Only applications.
Solved!
Go to Solution.

Finally I solved this problem. I bought a new memory card and then installed my app.I think Nokia's 2GB memory card have a problem. (System folder.)

Applications problem: "You cannot update this software since you have not owned the major version of this software."

Hi all,
RE: Applications problem: "You cannot update this software since you have not owned the major version of this software."
Until recently, I have not encountered this problem. And I am facing this problem for both my iPad and iPhone.
I only have 1 iTunes account and the most recent change was that I switched the location from Singapore to UK (I'm currently in the UK). I also updated my applications a couple of times before since the change in location, so I doubt it's due to the location change. I've tried signing out of the account in the iTunes accounts on the devices, then signing back in. I've also tried restarting the devices (and for the iPad, I even updated the iOS).
Any idea what else I can do to try to rectify this?
Thanks and regards,
Tammy

Hi there!
Thanks for replying!
1. Yup, my iOS is the latest (6.0.1), and I have 7 apps on my iPhone that apparently have updates. But it's been 6.0.1 for quite some time and I've also been able to update the apps till just this week.
2. I don't have a credit card associated with my account anymore. Ever since I changed the location, I removed the credit card details. But I didn't have problems with any of my apps (updating or downloading new ones) until this week. Also, all the apps I've downloaded since I came to the UK are free apps.
I still don't know what's wrong.

Solaris 10 NFS caching problems with custom NFS server

I'm facing a very strange problem with a pure java standalone application providing NFS server v2 service. This same application, targeted for JVM 1.4.2 is running on different environment (see below) without any problem.
On Solaris 10 we try any kind of mount parameters, system services up/down configuration, but cannot solve the problem.
We're in big trouble 'cause the app is a mandatory component for a product to be in production stage in a while.
Details follows
System description
Sunsparc U4 with SunOS 5.10, patch level: Generic_118833-33, 64bit
List of active NFS services
disabled   svc:/network/nfs/cbd:default
disabled   svc:/network/nfs/mapid:default
disabled   svc:/network/nfs/client:default
disabled   svc:/network/nfs/server:default
disabled   svc:/network/nfs/rquota:default
online       svc:/network/nfs/status:default
online       svc:/network/nfs/nlockmgr:default
NFS mount params (from /etc/vfstab)
localhost:/VDD_Server - /users/vdd/mnt nfs - vers=2,proto=tcp,timeo=600,wsize=8192,rsize=8192,port=1579,noxattr,soft,intr,noac
Anomaly description
The server side of NFS is provided by a java standalone application enabled only for NFS v2 and tested on different environments like: MS Windows 2000, 2003, XP, Linux RedHat 10 32bit, Linux Debian 2.6.x 64bit, SunOS 5.9. The java application is distributed with a test program (java standalone application) to validate main installation and configuration.
The test program simply reads a file from the NFS file-system exported by our main application (called VDD) and writes the same file with a different name on the VDD exported file-system. At end of test, the written file have different contents from the read one. Indeep investigation shows following behaviuor:
_ The read phase behaves correctly on both server (VDD) and client (test app) sides, trasporting the file with correct contents.
_ The write phase produces a zero filled file for 90% of resulting VDD file-system file but ending correctly with the same sequence of bytes as the original read file.
_ Detailed write phase behaviour:
1_ Test app wites first 512 bytes => VDD receive NFS command with offset 0, count 512 and correct bytes contents;
2_ Test app writes next 512 bytes => VDD receive NFS command with offset 0, count 1024 and WRONG bytes contents: the first 512 bytes are zero filled (previous write) and last 512 bytes with correct bytes contents (current write).
3_ Test app writes next 512 bytes => VDD receive NFS command with offset 0, count 1536 and WRONG bytes contents: the first 1024 bytes are zero filled (previous writes) and last 512 bytes with correct bytes contents (current write).
4_ and so on...
Further tests
We tested our VDD application on the same Solaris 10 system but with our test application on another (Linux) machine, contacting VDD via Linux NFS client, and we don�t see the wrong behaviour: our test program performed ok and written file has same contents as read one.
Has anyone faced a similar problem?
We are Sun ISV partner: do you think we have enough info to open a bug request to SDN?
Any suggestions?
Many thanks in advance,
Maurizio.

I finally got it working. I think my problem was that I was coping and pasting the /etc/pam.conf from Gary's guide into the pam.conf file.
There was unseen carriage returns mucking things up. So following a combination of the two docs worked. Starting with:
http://web.singnet.com.sg/~garyttt/Configuring%20Solaris%20Native%20LDAP%20Client%20for%20Fedora%20Directory%20Server.htm
Then following the steps at "Authentication Option #1: LDAP PAM configuration " from this doc:
http://docs.lucidinteractive.ca/index.php/Solaris_LDAP_client_with_OpenLDAP_server
for the pam.conf, got things working.
Note: ensure that your user has the shadowAccount value set in the objectClass

Migration from Solaris 9 to Solaris 10: Memory fault problem

We are facing to migrate appication from Solaris 9 to Solaris 10,
Compilation was not a problem, but while running the application it is raising the following fault,
tail of truss
Incurred fault #5, FLTACCESS %pc = 0x100025CA8
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
Received signal #10, SIGBUS [default]
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
core analysis show that the fault occurs at different points for different runs.
Please let us know if there is a patch to solve the same.
Thanks & Regards

Sorry i should have mentioned it as migration from Solaris 8 to Solaris 10.
Other info: In solaris 8 we compiled using -m32 and on Solaris 10 we are using -m64.
We had never tried on Solaris 9.
i just tried compiling on Solaris 9, i got the same error as in Solaris 10.
I tried to find using dbx but it crashes at different points for different runs.
First Run by pointing connection string - schema 1
dbx m2 core
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddClient(0xffffffff7ffff0c0, 0xffffffff7ffff2f0, 0xffffffff7ffff1d4, 0x373300, 0xff0000000000, 0x8080808080808080), at
0x100025ca8
[2] DBSERV_RadReadProxyClients(0x1, 0x10002599c, 0x0, 0x0, 0x0, 0x0), at 0x10006106c
[3] ClientInitialise(0x1, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000263e8
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff600, 0xffffffff7ffff5f8, 0xffffffff7ffff5f0), at 0x10002bd4c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2aa5, 0x10cf000, 0x20000000, 0x1, 0x8), at 0x10000c5d0
Second run by pointing Connect-string to Schema 2:
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddReplyMessage(0xffffffff7ffff1d8, 0x6564006d69732d63, 0xffffffff7ffff200, 0x656400, 0xff0000000000,
0x8080808080808080), at 0x10002e458
[2] DBSERV_RadReadRadiusReplyMessages(0x10002e348, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000700a4
[3] RadiusReplyMessageInitialise(0x1000b0538, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x10002e2dc
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff5f0, 0xffffffff7ffff5e8, 0xffffffff7ffff5e0), at 0x10002bc3c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2c29, 0x1be400, 0x20000000, 0x1, 0x8), at 0x10000c5d0

SSO java sample application problem

Hi all,
I am trying to run the SSO java sample application, but am experiencing a problem:
When I request the papp.jsp page I end up in an infinte loop, caught between papp.jsp and ssosignon.jsp.
An earlier thread in this forum discussed the same problem, guessing that the cookie handling was the problem. This thread recommended a particlar servlet , ShowCookie, for inspecting the cookies for the current session.
I have installed this cookie on the server, but don't see anything but one cookie, JSESSIONID.
At present I am running the jsp sample app on a Tomcat server, while Oracle 9iAS with sso and portal is running on another machine on the LAN.
The configuration of the SSO sample application is as follows:
Cut from SSOEnablerJspBean.java:
// Listener token for this partner application name
private static String m_listenerToken = "wmli007251:8080";
// Partner application session cookie name
private static String m_cookieName = "SSO_PAPP_JSP_ID";
// Partner application session domain
private static String m_cookieDomain = "wmli007251:8080/";
// Partner application session path scope
private static String m_cookiePath = "/";
// Host name of the database
private static String m_dbHostName = "wmsi001370";
// Port for database
private static String m_dbPort = "1521";
// Sehema name
private static String m_dbSchemaName = "testpartnerapp";
// Schema password
private static String m_dbSchemaPasswd = "testpartnerapp";
// Database SID name
private static String m_dbSID = "IASDB.WMDATA.DK";
// Requested URL (User requested page)
private static String m_requestUrl = "http://wmli007251:8080/testsso/papp.jsp";
// Cancel URL(Home page for this application which don't require authentication)
private static String m_cancelUrl = "http://wmli007251:8080/testsso/fejl.html";
Values specified in the Oracle Portal partner app administration page:
     ID: 1326
     Token: O87JOE971326
     Encryption key: 67854625C8B9BE96
     Logon-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
     single signoff-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout
     Name: testsso
     Start-URL: http://wmli007251:8080/testsso/
     Succes-URL: http://wmli007251:8080/testsso/ssosignon.jsp
     Log off-URL: http://wmli007251:8080/testsso/papplogoff.jsp
Finally I have specified the cookie version to be v1.0 when running the regapp.sql script. Other parameters for this script are copied from the values specified above.
Unfortunately the discussion in the earlier thread did not go any further but to recognize the cookieproblem, so I am now looking for help to move further on from here.
Any ideas will be greatly appreciated!
/Mads

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

Ideas for flights partner application problem

Hi!
We got problem with trying to configure flights demo partner
application.
URL: http://orawat5/servlet/flights/
Error code below:
An error has occured in this Application
oracle.security.sso.enabler.SSOEnablerException:
oracle.security.sso.enabler.SSOEnablerException:
java.sql.SQLException: ORA-06550: line 1, column 13: PLS-00201:
identifier 'WWSEC_SSO_ENABLER_PRIVATE.GENERATE_REDIRECT' must be
declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
at
oracle.portal.devguide.partner.application.PartnerSSOEnabler.getS
SOUserInfo(PartnerSSOEnabler.java:215) at
oracle.portal.devguide.partner.application.FlightDispatch.process
(FlightDispatch.java, Compiled Code) at
oracle.portal.devguide.partner.application.PartnerServlet.doGet
(PartnerServlet.java:48) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:499) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at
org.apache.jserv.JServConnection.processRequest
(JServConnection.java:402) at
org.apache.jserv.JServConnection.run(JServConnection.java:260)
at java.lang.Thread.run(Thread.java:479)
What do you think about what is problem?
(maybe this java ...PartnerSSOEnabler.getSSOUserInfo calls some
pl/sql code)
Regards,
Olli-Pekka

Can you please provide me following information so that I can understand the environment clearly?
1. Login Server version
2. SSO SDK version (e.g. ssosdk307_011223.zip) etc
3. Database version for Login Server and SSO SDK partner application
4. Where did you get the original JPDK zip file and version number?

Java application problem

I am using JDK1.4 and working on Windows Xp.
I have written a code for application in java as follows:
import javax.swing.*;
public class sample
JPanel panel;
static JFrame frame;
JButton but;
public sample()
frame=new JFrame("frame");
panel=new JPanel();
frame.getContentPane().add(panel);
but=new JButton("click");
panel.add(but);
public static void main(String args[])
sample s=new sample();
frame.setSize(300,300);
frame.setVisible(true);
on executing program application window has appeared and it ran properly.
Then I closed that application window.But after that in command prompt window curser was just blinking and it was not allow to enter also.
I have tried pressing CTRL+C also.But situation in command prompt was same i.e curser in command prompt was just blinking.
Then I closed cmd window ;but one error has occured saying that cmd window can not close .
My friend has told me that she is also having windows xp and JDK1.4 ; ctrl+c is working properly in her command prompt.She has written the above same code in her computer and it executes properly.
Even though she has not written following statement:
"frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);"
when she exits from application window ,her cmd window gave same problem of only blinking curser.But when she press CTRL+C ; her command prompt starts responding by giving root.But my command prompt is not giving
positive responce to "ctrl+c" when I am exiting java application.
Is it possible to solve this problem without giving statement
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); ?
Why my command prompt is not responding to CTRL+c?
How can I tackle this problem ?
Is there any other key which can be used in command prompt of Windows Xp?

Is it possible to solve this problem without giving
statement
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
?this is because Swing have started some non-daemon helper threads for its internal purposes and the default close operation for frame is just HIDE_ON_CLOSE. So, the system will not exit because those non-daemon thread still not terminated.
What is the problems setting the default close operation to JFrame.EXIT_ON_CLOSE ?

Java Webstart application problem with TLS certificate revocation checks (Java 1.7.0_76)

We have a problem with our Java Web Start Application regarding the TLS certificate revocation check:
The application is running on a server within a wide area network which is separated from the internet.
The application users have access to the WAN, and also access to the internet over some corporate proxy/firewall.
The user has to enter, for example "https://my-site.de/myapp/ma.jnlp" within a webbrowser or could also call "javaws https://my-site.de/myapp/ma.jnlp" to start the application client.
The webserver has a certificate from a trusted certificate authority. This certificate seems to be ok, the browser is even configured to perform OCSP status check.
The application files are signed with a certificate from another trusted certificate authority. This certificate seems also to be ok. Regarding this certificate there
are no problems with certificate revocation checks.
The problem is, while starting the application client there is a message box which tell us something like "the connection to this website ist not trustworthy",
"Website: https://my-site.de:80", and something about an invalid certificate, meaning the webserver certificate.
Obviously the jvm runtime, which is executed on the users workstation, tries to perform a revocation check for the webservers certificate, but this fails because
it cannot fetch the certificate under https://my-site.de:80.
The application will execute without further problems after that message but the users are very concerned about the "invalid" certificate, so here are my questions:
- Why is the application trying to get the webserver certificate over Port 80. Our application developers told me, there is no corresponding statement. Calling this address
has to fail while "https://my-site.de:443" or "https://my-site.de" would not have a problem.
- Is there a way to make the application go on without performing a tls revocation check? I mean, by adjusting the application sourcecode and not by configuring the users Java Control Panel.
While disabling the TLS Certificate Revocation check in the Java Control Panel, the Webstart Application executes without a warning message, but this is not a workable solution for
our users.
It would be great if someone can help me with a hint so i can send our developers into the right direction;-)
Many thanks!
This is a part from a java console output after calling "javaws -verbose https://my-site.de/myapp/"
(sorry for this is in german... and also my english above)
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
security: OCSP Response: GOOD
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
security: UNAUTHORIZED
security: Failing over to CRLs: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
network: Cacheeintrag gefunden [URL: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl, Version: null] prevalidated=false/0
cache: Adding MemoryCache entry: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl
cache: Resource http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl has expired.
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: ResponseCode für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: 200
network: Codierung für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: null
network: Verbindung mit http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl trennen
CacheEntry[http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl]: updateAvailable=true,lastModified=Tue Mar 24 10:50:01 CET 2015,length=53241
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird
network: Verbindung von socket://ldap.serverpass.telesec.de:389 mit Proxy=DIRECT wird hergestellt
security: Revocation Status Unknown
com.sun.deploy.security.RevocationChecker$StatusUnknownException: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    at com.sun.deploy.security.RevocationChecker.checkOCSP(Unknown Source)
    at com.sun.deploy.security.RevocationChecker.check(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.checkRevocationStatus(Unknown Source)
    at com.sun.deploy.security.X509TrustManagerDelegate.checkTrusted(Unknown Source)
    at com.sun.deploy.security.X509Extended7DeployTrustManagerDelegate.checkServerTrusted(Unknown Source)
    at com.sun.deploy.security.X509Extended7DeployTrustManager.checkServerTrusted(Unknown Source)
    at sun.security.ssl.ClientHandshaker.serverCertificate(Unknown Source)
    at sun.security.ssl.ClientHandshaker.processMessage(Unknown Source)
    at sun.security.ssl.Handshaker.processLoop(Unknown Source)
    at sun.security.ssl.Handshaker.process_record(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
    at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
    at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
    at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
    at com.sun.deploy.model.ResourceProvider.getResource(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory._buildDescriptor(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.Main.launchApp(Unknown Source)
    at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
    at com.sun.javaws.Main.access$000(Unknown Source)
    at com.sun.javaws.Main$1.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Suppressed: com.sun.deploy.security.RevocationChecker$StatusUnknownException
        at com.sun.deploy.security.RevocationChecker.checkCRLs(Unknown Source)
        ... 35 more
Caused by: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    ... 36 more
security: Ungültiges Zertifikat vom HTTPS-Server
network: Cacheeintrag nicht gefunden [URL: https://my-site.de:80, Version: null]

Add the JSF Jars to the WEB-INF/lib directory of the application. If still getting error add to the CLASSPATH variable in the startWebLogic script in the domain/bin directory.

Java Swing application problem in Windows vista

When we execute the Swing application in windows vista environment.
The look and feel of the swing components are displayed improperly.
Do we need to put any specific look and feel for windows vista environment or any specific hardware configuration is required to setup windows vista environment.
Please give some inputs to solve the problem.
We have tried with the following sample code to run in windows vista.
* Vista.java
* Created on December 5, 2006, 5:39 PM
public class Vista extends javax.swing.JFrame {
/** Creates new form Vista */
public Vista() {
initComponents();
pack();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">//GEN-BEGIN:initComponents
private void initComponents() {
jButton1 = new javax.swing.JButton();
jToggleButton1 = new javax.swing.JToggleButton();
jPanel1 = new javax.swing.JPanel();
jCheckBox1 = new javax.swing.JCheckBox();
jScrollPane1 = new javax.swing.JScrollPane();
jTextArea1 = new javax.swing.JTextArea();
jTextField1 = new javax.swing.JTextField();
getContentPane().setLayout(null);
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jButton1.setText("Button 1");
getContentPane().add(jButton1);
jButton1.setBounds(20, 20, 170, 30);
jToggleButton1.setText("Togle btn");
getContentPane().add(jToggleButton1);
jToggleButton1.setBounds(100, 80, 90, 20);
jPanel1.setLayout(null);
jCheckBox1.setText("jCheckBox1");
jCheckBox1.setBorder(javax.swing.BorderFactory.createEmptyBorder(0, 0, 0, 0));
jCheckBox1.setMargin(new java.awt.Insets(0, 0, 0, 0));
jPanel1.add(jCheckBox1);
jCheckBox1.setBounds(10, 40, 130, 13);
getContentPane().add(jPanel1);
jPanel1.setBounds(10, 150, 200, 130);
jTextArea1.setColumns(20);
jTextArea1.setRows(5);
jScrollPane1.setViewportView(jTextArea1);
getContentPane().add(jScrollPane1);
jScrollPane1.setBounds(210, 150, 164, 94);
jTextField1.setText("jTextField1");
getContentPane().add(jTextField1);
jTextField1.setBounds(240, 30, 140, 30);
pack();
}// </editor-fold>//GEN-END:initComponents
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new Vista().setVisible(true);
// Variables declaration - do not modify//GEN-BEGIN:variables
private javax.swing.JButton jButton1;
private javax.swing.JCheckBox jCheckBox1;
private javax.swing.JPanel jPanel1;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextArea jTextArea1;
private javax.swing.JTextField jTextField1;
private javax.swing.JToggleButton jToggleButton1;
// End of variables declaration//GEN-END:variables
}

When we execute the Swing application in windows
vista environment.
The look and feel of the swing components are
displayed improperly.Improperly means what? You must be aware that Vista's native L&F certainly isn't supported yet.

Sample application problem

I am following the guide to construct pages.
My problem is that i just create a page in the sample appliction and
i want to run it but when i click the run page
icon the page is not run. A user/password screen appear,
and then i am sent to the main form of the demo application.
Not the page i just build and want to test.
Should i have to mmodify the login screen to point to
my page?
Where is located the name of the first form in the login screen? I just cant find it
Regards,
Pierre

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

Solaris 10 x86 installation problem on ProLiant DL380..

I'm trying to put Sol10 b72 on a dual-proc ProLiant DL380 here, with the Compaq 5i array controller.
I have the Solaris 9 drivers from HP; they seem to work just fine for the installation.
The problem comes at the end of the first disc.
Sidebar:
For one thing (and this drove me NUTS until I got lucky and caught it during a reboot), at the end of the install, on the console, it asks for the driver diskettes..again.
The problem is, it doesn't say this ANYWHERE else, only on the console..and if you're doing the installation in the X desktop, you just never know it. It doesn't write this to the xconsole window. I tried installing a good 5-6 times before, instead of hitting the power button out of frustration after the install just hung again, I actually opened up a terminal and typed 'reboot'..and caught the "Please insert the diskette and press Enter" as it killed X. If anyone at Sun is reading this..you may want to fix this, before someone gets very frustrated that their installations never seem to finish...
End Sidebar.
So...I'm doing the console text install (otherwise you'll never see the message to insert the driver diskettes for the Broadcom NIC and the Compaq array), and sure enough, at the end of the install, it asks for the diskette. I pop in the diskette it's specifically asking for (the Compaq array diskette in this instance), and hit enter. It chugs for a second and then says it can't find the driver on the diskette.
Which is incorrect, because if it haden't found it on the diskette during the device configuration assistant phase during bootup, it wouldn't have even been able to install Solaris.
So..what's up? Anyone have any ideas why Solaris finds it one time but can't find it later? Is this a bug or problem in the installation script?
Thanks,
Greg

problem 1 is that it's looking for ../../s0.. Which I
managed to
fake out by creating the dir in the same mount
point.
Problem 2 is that it can't find .tmp_proto, which I
must
concur with. I can't find that on any of the b72 cd
images.
So, the setup_install_server fails.This seems to be the problem when you try to setup an install
server on a Solaris SPARC system for Solaris x86 clients, using
the Solaris 9 or Solaris 10/Express CD media.
There's a Solaris x86 UFS filesystem on slice 0 on the CD media,
and it's supposed to be mounted on the "s0" mount point,
otherwise setup_install_server won't work. On a Solaris x86 box,
vold mounts it automatically for you: /cdrom/cdrom0/s2 is the
mount point for the platform independant ISO9660 part of the CD
media, /cdrom/cdrom0/s0 is the UFS root filesystem.
Problem is that Solaris SPARC:
- does not understand Solaris x86 disk labels
- does not allow mounting x86 UFS filesystems
(and vice versa).
AFAIK, Solaris 9 DVD media does not have this problem. I
guess the same will be true when Solaris 10 DVD media is
available in a few months. On the DVD media there's enough
free space to include an extra copy of the files in the ISO9660
filesystem.

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Solaris 11.1 Application Problem

Similar Messages

Maybe you are looking for