Solaris 11 - after installation there is no remote desktop avaliable
Hi All,
I have the problem that after installation of Solaris Express on SPARC machine there is no available remote desktop. I am using Xmanager to connect to my server.
It works fine with Solaris 9 and 10.
Do you know what is the problem?
Thanks,
Daniel
I was installing Solaris Exrepss using JumpStart server running on Solaris 10. Solaris Express installed successfuly.
But there was no XServer running.
So I was enabling some services.
During the enabling services error message appers:
Jun 8 18:44:33 sun1 gdm[295]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:39 sun1 gdm[390]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:43 sun1 gdm[541]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Jun 8 18:44:43 sun1 gdm[294]: Failed to start X server several times in a short time period; disabling display :0
bash-3.00# svcs -a
STATE STIME FMRI
legacy_run 18:44:24 lrc:/etc/rcS_d/S29wrsmcfg
legacy_run 18:44:31 lrc:/etc/rc2_d/S10lu
legacy_run 18:44:31 lrc:/etc/rc2_d/S20sysetup
legacy_run 18:44:31 lrc:/etc/rc2_d/S40llc2
legacy_run 18:44:32 lrc:/etc/rc2_d/S42ncakmod
legacy_run 18:44:32 lrc:/etc/rc2_d/S47pppd
legacy_run 18:44:32 lrc:/etc/rc2_d/S70uucp
legacy_run 18:44:32 lrc:/etc/rc2_d/S72autoinstall
legacy_run 18:44:32 lrc:/etc/rc2_d/S73cachefs_daemon
legacy_run 18:44:33 lrc:/etc/rc2_d/S81dodatadm_udaplt
legacy_run 18:44:33 lrc:/etc/rc2_d/S89PRESERVE
legacy_run 18:44:33 lrc:/etc/rc2_d/S91afbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91gfbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91ifbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91jfbinit
legacy_run 18:44:34 lrc:/etc/rc2_d/S91kfbinit
legacy_run 18:44:35 lrc:/etc/rc2_d/S91zuluinit
legacy_run 18:44:35 lrc:/etc/rc2_d/S94ncalogd
legacy_run 18:44:35 lrc:/etc/rc2_d/S98deallocate
legacy_run 18:44:40 lrc:/etc/rc3_d/S16boot_server
legacy_run 18:44:40 lrc:/etc/rc3_d/S50apache
legacy_run 18:44:41 lrc:/etc/rc3_d/S52imq
legacy_run 18:44:41 lrc:/etc/rc3_d/S80mipagent
legacy_run 18:44:41 lrc:/etc/rc3_d/S84appserv
disabled 18:43:48 svc:/platform/sun4u/mpxio-upgrade:default
disabled 18:43:48 svc:/system/metainit:default
disabled 18:43:48 svc:/network/iscsi_initiator:default
disabled 18:43:48 svc:/network/ipfilter:default
disabled 18:43:48 svc:/network/rpc/keyserv:default
disabled 18:43:48 svc:/network/rpc/nisplus:default
disabled 18:43:48 svc:/network/nis/server:default
disabled 18:43:48 svc:/network/nis/client:default
disabled 18:43:48 svc:/network/dns/client:default
disabled 18:43:48 svc:/network/ldap/client:default
disabled 18:43:48 svc:/network/nfs/status:default
disabled 18:43:48 svc:/network/nfs/nlockmgr:default
disabled 18:43:48 svc:/network/nfs/cbd:default
disabled 18:43:48 svc:/network/nfs/mapid:default
disabled 18:43:48 svc:/network/inetd-upgrade:default
disabled 18:43:49 svc:/network/nfs/client:default
disabled 18:43:49 svc:/application/print/server:default
disabled 18:43:49 svc:/network/ntp:default
disabled 18:43:49 svc:/platform/sun4u/sf880drd:default
disabled 18:43:49 svc:/system/auditd:default
disabled 18:43:49 svc:/system/mdmonitor:default
disabled 18:43:49 svc:/system/metasync:default
disabled 18:43:49 svc:/system/rcap:default
disabled 18:43:49 svc:/network/rarp:default
disabled 18:43:49 svc:/network/dhcp-server:default
disabled 18:43:49 svc:/network/nfs/server:default
disabled 18:43:49 svc:/network/rpc/bootparams:default
disabled 18:43:49 svc:/network/samba:default
disabled 18:43:49 svc:/application/management/seaport:default
disabled 18:43:49 svc:/application/management/snmpdx:default
disabled 18:43:49 svc:/application/management/sma:default
disabled 18:43:49 svc:/application/management/webmin:default
disabled 18:43:50 svc:/application/print/ipp-listener:default
disabled 18:43:50 svc:/network/dns/server:default
disabled 18:43:50 svc:/network/routing/legacy-routing:ipv6
disabled 18:43:50 svc:/network/routing/ndp:default
disabled 18:43:50 svc:/network/routing/rdisc:default
disabled 18:43:50 svc:/network/ipv6-forwarding:default
disabled 18:43:50 svc:/network/routing/legacy-routing:ipv4
disabled 18:43:50 svc:/network/routing/ripng:default
disabled 18:43:50 svc:/network/routing/route:default
disabled 18:43:50 svc:/network/security/krb5kdc:default
disabled 18:43:50 svc:/network/ipv4-forwarding:default
disabled 18:43:50 svc:/network/security/kadmin:default
disabled 18:43:51 svc:/network/security/krb5_prop:default
disabled 18:43:51 svc:/network/nis/passwd:default
disabled 18:43:51 svc:/network/nis/update:default
disabled 18:43:51 svc:/network/nis/xfr:default
disabled 18:43:51 svc:/network/http:apache2
disabled 18:43:51 svc:/network/apocd/udp:default
disabled 18:43:51 svc:/network/slp:default
disabled 18:43:51 svc:/platform/sun4u/sckmd:default
disabled 18:43:51 svc:/platform/sun4u/dscp:default
disabled 18:43:51 svc:/platform/sun4u/dcs:default
disabled 18:43:51 svc:/platform/sun4u/oplhpd:default
disabled 18:43:51 svc:/platform/sun4u/efdaemon:default
disabled 18:43:51 svc:/platform/sun4v/efdaemon:default
disabled 18:43:51 svc:/system/consadm:default
disabled 18:43:51 svc:/system/pools:default
disabled 18:43:51 svc:/system/pools/dynamic:default
disabled 18:43:51 svc:/system/iscsitgt:default
disabled 18:43:51 svc:/system/cvc:default
disabled 18:43:51 svc:/system/sar:default
disabled 18:44:38 svc:/network/swat:default
disabled 18:44:38 svc:/network/nfs/rquota:default
disabled 18:44:38 svc:/network/tname:default
disabled 18:44:38 svc:/network/telnet:default
disabled 18:44:38 svc:/network/uucp:default
disabled 18:44:38 svc:/network/chargen:dgram
disabled 18:44:38 svc:/network/chargen:stream
disabled 18:44:38 svc:/network/daytime:dgram
disabled 18:44:38 svc:/network/daytime:stream
disabled 18:44:38 svc:/network/discard:dgram
disabled 18:44:38 svc:/network/discard:stream
disabled 18:44:38 svc:/network/echo:dgram
disabled 18:44:38 svc:/network/echo:stream
disabled 18:44:38 svc:/network/time:dgram
disabled 18:44:38 svc:/network/time:stream
disabled 18:44:38 svc:/network/comsat:default
disabled 18:44:38 svc:/network/finger:default
disabled 18:44:38 svc:/network/login:eklogin
disabled 18:44:39 svc:/network/rexec:default
disabled 18:44:39 svc:/network/shell:default
disabled 18:44:39 svc:/network/shell:kshell
disabled 18:44:39 svc:/network/talk:default
online 18:43:48 svc:/system/svc/restarter:default
online 18:43:50 svc:/system/installupdates:default
online 18:43:50 svc:/network/loopback:default
online 18:43:51 svc:/milestone/name-services:default
online 18:43:52 svc:/system/filesystem/root:default
online 18:43:54 svc:/network/physical:default
online 18:43:55 svc:/milestone/network:default
online 18:43:55 svc:/system/boot-archive:default
online 18:43:55 svc:/system/scheduler:default
online 18:43:55 svc:/system/identity:node
online 18:43:55 svc:/system/filesystem/usr:default
online 18:43:56 svc:/system/keymap:default
online 18:44:20 svc:/system/device/local:default
online 18:44:20 svc:/system/filesystem/minimal:default
online 18:44:20 svc:/system/cryptosvc:default
online 18:44:20 svc:/system/rmtmpfiles:default
online 18:44:20 svc:/system/identity:domain
online 18:44:20 svc:/system/coreadm:default
online 18:44:20 svc:/system/picl:default
online 18:44:20 svc:/system/sysevent:default
online 18:44:20 svc:/system/device/fc-fabric:default
online 18:44:21 svc:/milestone/devices:default
online 18:44:21 svc:/system/name-service-cache:default
online 18:44:23 svc:/network/initial:default
online 18:44:23 svc:/network/service:default
online 18:44:23 svc:/system/manifest-import:default
online 18:44:24 svc:/milestone/single-user:default
online 18:44:25 svc:/system/power:default
online 18:44:25 svc:/system/filesystem/local:default
online 18:44:25 svc:/system/cron:default
online 18:44:25 svc:/system/sysidtool:net
online 18:44:26 svc:/system/dbus:default
online 18:44:26 svc:/network/shares/group:zfs
online 18:44:27 svc:/network/shares/group:default
online 18:44:27 svc:/network/rpc/bind:default
online 18:44:27 svc:/system/sysidtool:system
online 18:44:27 svc:/milestone/sysconfig:default
online 18:44:27 svc:/system/sac:default
online 18:44:27 svc:/system/filesystem/autofs:default
online 18:44:27 svc:/network/inetd:default
online 18:44:28 svc:/system/utmp:default
online 18:44:28 svc:/system/console-login:default
online 18:44:28 svc:/system/system-log:default
online 18:44:28 svc:/system/dumpadm:default
online 18:44:28 svc:/application/management/wbem:default
online 18:44:28 svc:/system/postrun:default
online 18:44:29 svc:/network/ssh:default
online 18:44:29 svc:/application/graphical-login/gdm:default
online 18:44:29 svc:/application/font/fc-cache:default
online 18:44:30 svc:/network/smtp:sendmail
online 18:44:31 svc:/system/fmd:default
online 18:44:32 svc:/network/routing-setup:default
online 18:44:35 svc:/milestone/multi-user:default
online 18:44:36 svc:/system/intrd:default
online 18:44:36 svc:/application/graphical-login/cde-login:default
online 18:44:36 svc:/application/cde-printinfo:default
online 18:44:38 svc:/system/hal:default
online 18:44:38 svc:/system/filesystem/rmvolmgr:default
online 18:44:39 svc:/network/rpc/gss:default
online 18:44:39 svc:/network/rpc/meta:default
online 18:44:39 svc:/network/rpc/smserver:default
online 18:44:40 svc:/application/x11/xfs:default
online 18:44:40 svc:/network/rpc/ocfserv:default
online 18:44:40 svc:/network/rpc/cde-calendar-manager:default
online 18:44:40 svc:/network/rpc/cde-ttdbserver:tcp
online 18:44:40 svc:/network/rpc/mdcomm:default
online 18:44:40 svc:/network/rpc/metamed:default
online 18:44:40 svc:/network/rpc/metamh:default
online 18:44:40 svc:/network/rpc/rex:default
online 18:44:40 svc:/network/rpc/rstat:default
online 18:44:40 svc:/network/rpc/rusers:default
online 18:44:40 svc:/network/rpc/spray:default
online 18:44:40 svc:/network/rpc/wall:default
online 18:44:40 svc:/network/cde-spc:default
online 18:44:40 svc:/network/security/ktkt_warn:default
online 18:44:40 svc:/network/login:klogin
online 18:44:40 svc:/network/login:rlogin
online 18:44:41 svc:/network/ftp:default
online 18:44:41 svc:/network/rpc-100235_1/rpc_ticotsord:default
online 18:44:41 svc:/milestone/multi-user-server:default
online 18:44:41 svc:/system/zones:default
online 18:44:42 svc:/system/basicreg:default
online 18:45:03 svc:/system/webconsole:console
offline 18:44:30 svc:/application/print/rfc1179:default
Could you please help me to resolve that issue?
Thanks,
Daniel
Similar Messages
-
We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.Hotfix Released here:
http://support.microsoft.com/kb/2916846 -
Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
Messages.app no longer connects to Jabber after App Store auto-installed Remote Desktop Update 3.8.2
Messages.app no longer connects to my company's Jabber server after App Store auto-installed Remote Desktop Update 3.8.2 (even though I never purchased that app). The Remote Desktop app can not be found anywhere on my machines.
I suspect the Remote Desktop update because Messages stopped connecting on my office MB Air after the update but still worked on my home iMac. Next day the iMac received the update and Messages stopped connecting on that machine too.
Messages attempts to connect for several minutes (it's been trying for 30 mins as I type this) and just hangs. Occasional I get the following error message:
Error: Messages lost the connection to the Jabber account 'account'. A network error occurred.
I've tried:
- Deleting and recreating the Jabber account in Messages.app
- Toggling on/off SSL (SSL required by our server)
- Toggling on/off auto detect server and port (port 5222 on our server)
- Deleting every plist, cache, etc., I could find in the Library for any IM client I've ever used
- Checked that Keychain trusts the Jabber server SSL certificate (it is a self signed cert)
- Tried connecting from three completely different networks including the company VPN
- Multiple PRAM resets
- Setup a Google Talk account in Messages - works fine
I'm at a loss...
KurtI installed and setup Adium. Adium works but Messages.app still does not connect to Jabber.
-
Are there any free remote desktop programs
Are there any free remote desktop or remote assistance programs available for Panther? I only need a server for the Panther computer, as I would be helping that user, but he would not need to help me. I was wondering if anyone knew of any. I wanted to try LogMeIn, but it requires Tiger. I couldn't find anything at Wikipedia's comparison of remote desktop applications. Thanks
Look for the following at VersionTracker or MacUpdate.
AstroAppMacX 2.11
Share My Desktop 1.2
Vine Server 3.0 -
I am the Server Administrator and have server 2012 Standard running on a single computer for our small (50 employee) company. It's primary role is to house one software application that manages our data. Our employees need to remotely access this
server to use this software program. For the last 4 months we have successfully done that using Remote Desktop.
Unfortunately our RDS trial period ran out on our Server, and so I have recently installed 21 RDS User CALs on to the server to still be able to access this server remotely. When I installed them, using the Install Wizard, I selected 'User CALs' as that
is what they are. However, when I try to use remote desktop and access the server remotely, I get the message: "remote session was disconnected because there are no remote desktop license servers available to provide a license"
Do I have to install the RDS User CALs as Device CALs instead even though they are USER CALs?? Did I forget to check a box or something? Please help! We are a Non-Profit and really can't afford Microsoft's $260 support fee when I have a feeling
this has got to be an easy solution.Hi,
1. Did you create an RDS deployment or just install the RD Session Host and RD Licensing Role Services on your server?
2. If yes to #1, have you set the licensing mode and licensing server name in Server Manager -- RDS -- Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab? Did you make your RDSH server part of a collection? The RDSH server must
be part of a collection in order for the deployment settings to apply.
3. If no to #1, then please set the licensing mode/specify the licensing server name via group policy setting. For example, you could use gpedit.msc and configure the following settings:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
Use the specified Remote Desktop licensing servers
Set the Remote Desktop licensing mode
Thanks.
-TP -
Hi,
I have been using Windows server 2012 at my company and generally take a remote access to this server. However, since last few days, I have been receiving the Error "The remote connection was disconnected because there are no Remote Desktop License
Servers available to provide a license. Please contact the server administrator".
My entire work has come to a halt because of this error as all my applications are running this server and their remote access is needed for my regular requirements.
I had tried one of the solutions proposed at one of these forums especially using gpedit.msc but to no avail.
Regards,
AdityaHi Aditya,
Thank you for posting in Windows Server Forum.
Agree with the words of armin, please verify that you have properly installed correctly. Verify RDS Licensing service running on License Server. Verify that the client, the RDS server, and the license server can communicate by ensuring that Domain Name System
(DNS) is configured correctly on each computer. You can run the ping command from each computer to each computer using the IP address, FQDN, and the NetBIOS name. If any of the ping commands fail, verify the DNS configuration on the network.
In addition, you can also try “GracePeriod” registry setting on this path (HKLM\System\CurrentControlSet\Control\Terminal Server\RCM) from
this article.
Hope it helps!
Thanks.
Dharmesh Solanki -
Hi,
I am getting this error from windows server : remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator.
Remote desktop Session Host Server Configuration Details:
The RD licensing Diagnoser(WIN-909xxxxxxxxxxx):
Number of license available for clients : 0
Remote Desktop Session Host server version: Windows server 2012 R2
Active Directory Domain : Not applicable
Licensing mode : Not configured
Now, Down I am getting this error as well shown by the system:
RD licensing Diagnoser Information- 2 errors:
Win-909xxxxxxxxxx : licensing mode for the Remode Desktop Session Host Server is not configured.
Win-909xxxxxxxxxx : The grace period for the Remote Desktop Session Host server has Expired, but the RD Session Host server has not been configured with any license servers. connections to the RD Session Host server will be denied
unless a license server is configured for the RD Session Host server.
Now my kestion is :
Do I need to buy a license key of the windows server to not getting this error or it may continue appear even if I purchased the license and not configure RDS and AD.
Do I need to configured only RDS and AD and buy the license key of windows server later because I still have 55 day of trial.
Do I just buy the RDS client access license (L).
Please could you help on this, am new in windows server?Hi,
As the message indicates, the grace period for the Remote Desktop Session Host server has Expired, you need to purchase and install RDS CALs. Also, you need to configure related settings
to continue using Remote Desktop Services. Otherwise, you cannot connect to the server remotely.
References:
Understand the licensing grace period
http://technet.microsoft.com/en-us/library/hh553157(v=ws.10).aspx
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
Specify the Remote Desktop Licensing Mode on an RD Session Host Server
http://technet.microsoft.com/en-us/library/cc754487.aspx
Specify a License Server for an RD Session Host Server to Use
http://technet.microsoft.com/en-us/library/cc770585.aspx
Meanwhile,
1. AD is not required for RDS. However, it is recommended.
2. As you do not purchase Windows Server and related licenses as well, I suggest you contacting Microsoft sales or partner firstly.
How to buy Windows Server 2012 R2
http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx
Best Regards.
Jeremy Wu
TechNet Community Support -
Installation of packages via Remote Desktop 3.5.3 fails
Hi,
I'm using Remote Desktop on one of our Mac Mini's (OS X Server 10.6.8) to install packages on one of our Xserve's
If I try to do it from a Mac Mini with Remote Desktop 3.4 remote installation of packages works fine on Xserve's running either ARD v3.5.1 or v. 3.5.3
However, on one of our Mac Mini's I upgraded ARD to 3.5.3 and remote installation of packages fails.
This is what I see in /var/log/system.log:
Oct 1 10:30:34 ws11893 Remote Desktop[1806]: SendMessageToAgentWithReply: gCmdReplyPtr->cmdResult contained error code -6404
Oct 1 10:30:34 ws11893 Remote Desktop[1806]: SendPacketWithReply error -6404
Oct 1 10:30:34 ws11893 Remote Desktop[1806]: Failed in SendPacketWithReply for kCmdFT2_AdminToSender with packet sub-command kFT2_AdminSendInfo. Error: -6404
Any one having any experience with solving this issue?
Thanks
Hi,
I'm using Remote Desktop on one of our Mac Mini's (OS X Server 10.6.8) to install packages on one of our Xserve's
If I try to do it from a Mac Mini with Remote Desktop 3.4 remote installation of packages works fine on Xserve's running either ARD v3.5.1 or v. 3.5.3
However, on one of our Mac Mini's I upgraded ARD to 3.5.3 and remote installation of packages fails.
This is what I see in /var/log/system.log:
Oct 1 10:30:34 ws11893 Remote Desktop[1806]: SendMessageToAgentWithReply: gCmdReplyPtr->cmdResult contained error code -6404
Oct 1 10:30:34 ws11893 Remote Desktop[1806]: SendPacketWithReply error -6404
Oct 1 10:30:34 ws11893 Remote Desktop[1806]: Failed in SendPacketWithReply for kCmdFT2_AdminToSender with packet sub-command kFT2_AdminSendInfo. Error: -6404
Any one having any experience with solving this issue?
Thanks
-
I recently installed 21 Remote Desktop Services (RDS) User CALs on my Server 2012 standard computer. It was an Open License donation from Microsoft as we are a non-profit. After installing them successfully (I installed them as USER and not DEVICE)
the warning message that my "remote desktop services will expire in 63 days" message no longer appears :) however, I can no longer connect to our server remotely. Our staff needs to access a single data management program on a daily basis and
that program is housed on our server computer.
I know that the solution to this is probably easy (like checking a box or installing a component). Can you please help? Why would we have been able to access the server remotely before the install of RDS User CALs and not after?
Thank you for your time and help in this regard.Hi,
Thank you for your posting in Windows Server Forum.
First of all the user which you want to provide access for remote session must be member of “Remote Desktop User” local group.
In regards to your error it seems that your RDS license server not able to locate the license server properly and licensing mode not configured properly. To resolve this issue you can try to change the Licensing mode or need to call the MS clearing house to
reactivate the license server in a correct mode. You must have all the license paper and all related document on hand and then call clearing house, explain them your issue and they will help you to reactivate it.
Please check beneath article for additional details.
Event ID 26: Your terminal services temporary client license will expire in N days (Only for reference as the link is for server 2003)
RD Licensing Configuration on Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki -
Xvnc hangs after exiting Remote Desktop session
After closing a window of Remote Desktop session with XFCE Desktop run on latest ArchLinux, XRDP server exits, but Xvnc server started by that session keeps running, and within 5-10 min starts suddenly putting high load on CPU, while doing nothing useful.
Why this happen, and how to auto close it when closing Remote Desktop window & session?While the hang reason is still unknown, I found that login out of XFCE from within open XRDP session window before closing the session will shutdown relevant processes on the server host, including Xvnc.
-
The grace period for the Remote Desktop Session Host server has expired
<p>I'm running Windows Server 2012, we only have 1 server and it's a DC. I'm trying to RD to the server from my Windows 7 laptop. It was working fine on Friday but when I came in on Monday I got message saying that 'The remote session was disconnnected
because there are no Remote Desktop License Servers available to provide a license'
So after a bit of digging I found out my 'grace period' had expired, so ordered a new license which I got today, installed this all ok but still i cannot connect via RD I get the same message....went into the RD License Diagnoser and it said the problem
was as follows
'The grace period for the Remote Desktop Session Host server has expired, but the RD Session Host server has not been configured with any license servers. Connections to the RD Session Host server will be denied unless a license server is configured for
the RD Session Host server.'
Suggested Resolution as follows
Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host Server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
Host Server to use it.'
I cannot figure out how to do this as I cannot find the RD Session Host Server tool.
Can any of you lovely people help me pleaseHello,
Best option would be to assign the license server by using AD GPO. Youl will need to configure the following:
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
and define the settings for:
Use the specified Remote Desktop License Server
Set the Remote Desktop Licensing mode
Then assign the policy tho your server.
regards Robert Maijen -
SSIS Package will only run as SQL Agent Job when I have remote desktop to server open.
Hey guys, so I have another problem to add to the already massive 'SSIS/SQL Server Agent Job' pile. After days of searching, I can't seem to find anything specific to my problem though.
The setup is as follows: a SSIS package that refreshes and saves excel files that are hosted on a server. The package runs fine on the local machine, using BIDS on the server, and will even work as a SQL Agent Job on the server IF there is a remote
desktop connection to the server. To elaborate, if I simply run the job as you would normally do it will fail and give the below error. If I run the job while either myself, or a different machine, has a remote desktop connection to the server where the
job is scheduled - it will run successfully.
Below is the error from the History File of the job. Any help would be greatly appreciated.
Source: Refresh Excel and Save Description: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x8000401A): Retrieving
the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 8000401a. at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.ExcelRefresh(String FileName)
at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.Main() --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct&
sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags
invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo
culture, String[] namedParams) at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture) at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
UPDATE:
In my previous post the Identity in DCOM Config file for Microsoft Excel was set as The Interactive User. The job was working only when I had a remote connection to the server open.
If I set the Identity to 'This User' and use the username and password of the server login account, it will work as a scheduled job without needing an open remote connection to the server. So it works, great! but I have reservations setting this
for all instances of Excel for the server. I'm sure other users have different accounts they use for running Excel. Any suggestions around this?Hi LiamSexton,
It should be the server-side Automation of Office issue described in the following KB article:
http://support.microsoft.com/kb/257757
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
User Identity: Office applications assume a user identity when the applications are run, even when Automation starts the applications. The applications try to initialize toolbars, menus, options, printers, and some add-ins based on settings in the user
registry hive for the user who launches the application. Many services run under accounts that have no user profiles (such as the SYSTEM account or the IWAM_[servername] accounts). Therefore, Office may not initialize correctly on startup. In this situation,
Office returns an error on the CreateObject function or the CoCreateInstance function. Even if the Office application can be started, other functions may not work correctly if no user profile exists.
To work around the issue, you can refer to the following alternative introduced in the article:
Most server-side Automation tasks involve document creation or editing. Office 2007 supports new Open XML file formats that let developers create, edit, read, and transform file content on the server side. These file formats use the System.IO.Package.IO
namespace in the Microsoft .NET 3.x Framework to edit Office files without using the Office client applications themselves. This is the recommended and supported method for handling changes to Office files from a service.
Regards,
Mike Yin
TechNet Community Support -
Upgraded to Lion missing Remote Desktop
I'm running 10.8.1 and after I upgraded to Lion remote desktop is missing (this is a work computer so i'm unsure if ARD was there to begin with, but there was some related files i found poking around in the termial). I've tried installing many different versions but during the install i get an error with a caution on my harddrive telling me I need 10.7 or later. I've also tried various walk arounds for this issue like extracting the app and adding it to hdd and trying a software update, but no updates are found. I managed to get to a serial input window with version 3.6 but from what i understand this should be part of the Lion install. I'm not sure what to do at this point. i'm using a mac-mini server if that helps. Please give me some suggestions.
Apple Remote Desktop (Client) is built into Mac OS X. As such, it is normal to find file on the computer assocheated with Apple Remote Deskop. To check if Apple Remote Desktop (client) is enabled on your computer, you can go to: Apple Menu, System Preferences, Sharing, Remote Management. If Remote Management is checked then your computer may be configure to allow remote access to the computer.
Because Apple Remote Desktop (Client) is built-in, you would not need to install the client. Trying to install the client would result in an error message; because it's already installed.
You can check for Apple Remote Desktop (Client) updates, and other system updates, by clicking apple menu, and choosing check for software updates.
If you want to be able to Remotely Connect to other computers from the server, or from another computer using Apple Remote Desktop, then you would need a copy of Apple Remote Desktop 3. The current vertion of Apple Remote Desktop, for 10.8, can be purchased, and then downloaded, through the App Store. (apple menu, app store)
Apple Remote Desktop 3 is not included with lion, or lion server, it is a sperate purchased in the app store.
If you need to remote into many computers on your local network (not over the internet) then Apple Remote Desktop 3 may be an effective product to do so.
If you want to connect to one or many other computers over the internet then you may want to look into other solution.
If you want to connect just remotely to the server, and only the server, from the local network, then you may want to consider using VNC, it's built into Mac OS X. -
Apple Remote Desktop 3.4 issue
Hi there,
In Apple Remote Desktop 3.4 server I added a client computer by doing a scan by IP. Once the computer was added to a group I was able to take remote control, however after a few minutes I noticed the ARD console was having issues authenticating to it (Even though I authenticated properly to get the machine in ard). The ARD console was reporting that the computer was offline, but I was still able to observe and take control of the machine.
I then noticed that the MAC address was the incorrect address. It was displaying another computer mac address that is on campus.
My question: is ARD getting the Ethernet ID/MAC address from DHCP? WINS? DNS? Open Directory? LDAP? or from the client it's self? or do I have corruption in my ARD database?
I am seeing this on a hand full of computers around campus (out of 500+ computers)
(If I remove the client - the same thing occurs)Yes I've tried to ping the IP address and I get a reply.
I've just discovered this morning that the issue appears to be with Apple remote desktop.
The issue came up again this morning...I ended up shutdown ARD completely then loaded it back up, and guess what! The MAC address was showing up properly. I've discovered this is working for SOME of my issues. For the ones that weren't displaying properly I deleted the computer account out of ARD and then manually added the computer though a scanner import via single network address. The scanner finds the computer and it displays the correct Ethernet ID.
So I’m guessing there is a bug with ARD and its mixing up/displaying the wrong Ethernet ID of some machines....
Q
Maybe you are looking for
-
i've been using my tv as an external monitor to watch itunes content for some time now. until the last week, all i had to to was plug in the mini-dvi to s-video cable that connects to the video-in jacks in the back of the tv, and it would recognize t
-
I am trying to get an IPOD touch started. It will not connect to wifi. Any tip?
-
Firefox help drop down menu disabled
I'm running Firefox 26, as far as I can tell. When I try to open the Help drop down menu with my mouse or Alt-H, nothing happens. The Help menu doesn't drop down. I scanned for Malware, but found nothing. Happy Holidays!
-
Hi , where can i get PPTs on web dynpro for ABAP for beginers... points assured. Thanks in advance, Kiran
-
Safe to replicate when I can't get +R to play?
I am working on my third project destined for DVD-9 replication in DVDSP 3.0.2. I had a successful build, and DVDSP told me that my formatting was successful on a Memorex dual-layer DVD+R using an NEC ND-3540A burner. I can play the disc on my two Po