Solaris 11 Bare Metal Backup and Restore

Hi,
I am new to solaris. can anyone guide me how to do a bare meta image backup and restore? any software solution.
Thanks,
Mazhar

See this article:
http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-091-sol-dis-recovery-489183.html
Which BTW was the second hit from google when I searched for "Solaris 11 backup restore"

Similar Messages

Exchange Server 2013 backup and restoration question

Good afternoon
I am wondering if I can pick people's brains here if that's not too much trouble.
I have recently implemented an Exchange 2013 environment with 3 servers (two multi-role CAS & MBX physical machines, and one further virtual CAS server). Everything is working correctly and mail-flow is fine. My question relates to backup and restoration
procedures. I am running a single Database Availability group with the two multi-role servers members of the this group and I have one Mailbox Database on the DAG, passive on one member and active on the other. Failover has been tested and this is functioning
as expected.
The backup environment I have implemented is as follows. I have utilized a separate Microsoft DPM 2012 server that runs a nightly Bare Metal backup on both multi-role servers with a retention range of 14 days and I have protected the DAG using DPM with a
nightly full-express backup and 4 hourly syncs on one of the multi-role servers. Furthermore the Mailbox Database is protected, again nightly with a copy-backup.
I am confident I know what to do should the mailbox database become corrupted or lost or need to be restored for one reason or another (it would just be a case of restoring the backed up mailbox database using DPM to a pre-created recovery database), what
I am not quite so sure on is what I would do should I lose one or both of the multi-role CAS and MBX servers (the third CAS I am not so worried about as it is not used for incoming mail flow from the internet and we really only use it for ECP as we did not
want to expose this to the internet). I wonder what process should follow to restore my Exchange servers (I know how to perform the Bare Metal recoveries using WSB) and what configuration would be required after restoring the Bare Metal backups.
I know this is a reasonably long question but if anyone has any advice for me I would appreciate it greatly in the unlikely event something goes horribly wrong with my Exchange environment.
Thanks in advance

Hi,
Yes, Most of the configuration settings are stored in AD. Mail data and personal related data are store in Mailbox DB. We just need to take consideration of these two points.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

WIndows Server Bare-Metal Backup

I have just completed a bare metal installation of 2008 Server R2 from a Microsoft 2008 Server DVD image.
I have found a (OEM Partition) 63MB, standard System partition from Dell as expected.
I have found a (OS Partition) 2.01GB. I believe this is the standard WinRE partition created by the Microsoft installer, considering I can do an F8 boot, and select Repair Server. The interesting thing is that it was created as a FAT32 partition,
and it is apparently hidden since there is no driver letter assigned in Disk Management.
I then tried to used Windows Server Backup to complete a bare-metal backup so I could test it. But Windows Server Backup will not backup the FAT32 partition. It indicates I must convert it to NTFS.
Am I correct, is this the WinRE partition?
How can I convert it to NTFS considering there is no driver letter assignment?
Thanks in advance!

I assume that this is the Dell recovery partition that is used to
restore your computer’s software to the factory settings. Many years ago, Dell started shipping computers with a small Dell Utility partition hidden at the front of the hard disk, followed by the main (Windows operating system) partition. For information,
please read:
Inside the Dell PC Restore Partition
However, after you installing the new operating system, the boot file is changed, you may not be able to access this recovery partition. Currently you
could either format this partition to free the space and
make your own WinRE partition on the hard disk or contact Dell to rebuild the recovery partition.
Please note:
we provide the third party link for technical reference. There might be some changes without notice, Microsoft doesn’t guarantee any accuracy on contacting
information.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Full OS backup and restoration

I have a Win 2012 R2 server installed on a Dell PE730 box. The box is highly critical and there are lot of configurations in that server that I want to create a full backup and incase of failure of the box, the backup should be useful to restore the box
with all configurations.
I don't use any third party tools for backup - use Windows backup role in Win 2012, also plans to use the Windows feature itself to restore also.
What is the best method of creating a backup and restore plan. Pls suggest

Hi,
You can use a full server backup to perform all types of recoveries, including system state and bare metal recoveries. We recommend this option. Then you could recover your server operating system or full server by using Windows Recovery Environment.
For more detailed information, you could refer to the articles below:
Backing Up Your Server
https://technet.microsoft.com/en-us/library/cc753528.aspx
Recover the Operating System or Full Server
https://technet.microsoft.com/en-us/library/cc755163.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

2013 Backup and Restore

When I go to my backup and Restore and check the job status it tells me there is a backup in progress:
A backup or restore is currently in progress
How do I reset this as there is no backup that I have run for some time?

Hi,
According to your post, my understanding is that the job status still shown “A
backup or restore is currently in progress”.
Did you delete a old search application and recreate a new one before?
If so, maybe the old object is still existing in SQL, you can used the following stsadm command:
Stsadm -o deleteconfigurationobject -id “object GUID”
To find the object GUID, simply go into Central Admin - Manage Service Applications and highlight the offending legacy service application (Search Service
Application in the case). You should now be able to see the GUID in the IE address bar. Run the command above, and try your backups again and all should be well.
For more information:
http://imperfectit.blogspot.com/2010/06/sharepoint-2010-farm-backup-fails.html
There is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/en-US/0310b061-ea1c-4576-bb74-a02f5e04a3a0/backup-job-stuck-in-process-in-backup-and-restore-job-status?forum=sharepointadminprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Backup and Restore not working or am I missing something??

I installed the Desktop Manager primarily to be able to save the info on my computer. Only problem is when I go to Backup and Restore the button that allows me to backup (or restore) is not highlighed so it's not allowing me that option. All it will allow me to access is the 'advanced' and 'options button' on the Backup and Restore window. I don't want to lose all my info again if the phone crashes so please HELP! And it took me about 10 tries before the Desktop Manager successfully loaded on my computer so not sure if the problem was in the installation but when I look at the Desktop Manage window it shows 'disabled' and also doesn't allow me to choose any of the options on the bar at the top. How do I enable this program?? When I tried loading the disk I got some message about now being able to run Adobe scripts so not sure if that might be part of the problem.
Solved!
Go to Solution.

Just realized that I had the backup and restore window open when I wrote the above post and when I closed that the window for the Desktop Manager did allow me to access the toolbar at the top but the Desktop Manager is still disabled.

HT201250 Does Time Machine backup and restore Bootcamp?

I am replacing defective hard drive in an iMac that I primarily use as a pc under Bootcamp. I have to find some way to clone and restore the bootcamp partition. I was told today by a Genius at the Apple store that I should buy a 2 TB external (which I did for $150) and run Time Machine. He assured me that my bootcamp partition would be backed up along with the entire mac partition and that I would be able to restore everything perfectly on the new hd. Now that I am home and continuing my research, I can't find anywhere that says it will work. Documentation on Time Machine fails to mention bootcamp. So, does Time Machine backup and restore bootcamp or not? And will it be bootable after the restore? Help!

I think you've got it! I have never used WinClone so I cannot attest to how well it will work, but it's pretty much all lthere is. You will have to create a new Boot Camp partition on the new drive, and it should be the same size as the partition you cloned.
Be sure you prep the new hard drive:
Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU upon completion and return to the installer. Now install Snow Leopard or restore from your Time Machine backup.

Solaris9 Backup and restore

Hi
I want to backup the entire file systems of Solaris9 server to a single tape. I also want to restore it when its is required.
The backup drive is connected to a remote machine and proper access is there.
Which is the best way ie., ufsdump, cpio,......... to do this and what is the exact syntax to do backup and restore.
Thanks in advance
Ashraf.

Perhaps you might monitor this other discussion thread from the Solaris 9 forum:
http://swforum.sun.com/jive/thread.jspa?threadID=94883&tstart=0
It is still a work-in-progress, with no final resolution.

HT4528 My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished the RESTORE would fail c

My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

HT1766 Now, I understand how the backup and restore the backup functions. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already the

Now, I understand how the backup and restore the backup features function. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already there? I really do not want any music on my iPhone because I have an iPod for that. Thanks. Hope someone can help.

When you connect your phone and start iTunes on the left side you will see your phone listed under devices.Click on te icon next to it that looks like a battery. Click on the music button at the top and uncheck the sync music box.

Windows 8 full system backup and restore to new laptop (system with 32GB mSata Cache)?

Hi, I have a new Envy DV7-7205 which has 2TB storage with 32GB HDD Cache (or mSata, not really sure how it's implemented). I need to return the laptop as it's faulty but I would like to startup on the replacement exactly where I left off.
Are there any special methods required to backup and restore the system image from the old laptop to the new one, particularly with consideration to the 32GB SSD cache, as this doesn;t seem to appear as a distinct "drive" on the system.
Please can anybody advise the simplest, safest method to move my entire system from old to the new laptops (should be exactly the same spec machine).
Many thanks,
Greg
HP Envy DV7-7205tx, 2x1TB HDD, 32GB mSata Cache, Windows 8 Pro

Hi,
Firstly I don't know how this is going to work on new machine because the Windows 8 lisence would NOT work at all.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I backup and restore my itunes media using a hard drive?

Can I backup and restore files if I used a hard drive?
I do not want to backup my entire itunes library of >200 GB to individual CDs and DVDs, if I can help it; it will take forever. Hence the above question.
Thanks!

The answer to your question is yes, though anyone who posts to this group would not be asking that question. I think you might be looking for the iTunes discussions group?
RealDave

How to backup and restore working Mac OS 9 computer ?

I have a working G4 running OS 9.0, and I would like to backup and restore that hard disk to a second G4 computer that is OS 9 bootable.
I have a CD backup taken by Toast v4, of the entire disk, but I do not know how to restore the contents to the second computer. My previous attempt hosed the hard disk inside the second computer.
I'm thinking I can boot up the second computer via cd-rom or external hard disk, but I'm not sure I can copy the contents from the cd-rom correctly. In particular, I'm guessing the boot sector is challenging to restore.
I probably have some old OS 9 cd-roms around here, if I need to go that route.
I've thought about removing the working hard disk, and using dd on a linux machine to make a clone of the drive. I'd prefer not to go that route, as I don't want to touch working hardware.
I've also thought about hooking up a portable USB disk drive to my working OS 9 machine, and doing some sort of cloning. I'm not sure what program I would need to do that, and whether it's part of the OS 9 suite of tools, or a 3rd party tool. I used to own some various disk tools, but it's been so long I'm not sure I can find the cd's.
So if anybody can point to some instructions on the net for me to follow, or have any suggestions, I'm all ears.
Thanks
mark

If the second computer originally shipped supporting a newer OS 9.x
system than the first 9.0, the other computer's OS9 version probably
won't work since it would be too old. In the case of drag and drop,
you can get away with a lot more than what an installer package may
allow, since the installer's software can be avoided with Pacifist. So
another computer's OS9.2.2 basic system could be used as a boot
volume even if it is sparse and not the fully complemented OS 9.2.2
that a full retail build would install from a rich full retail install disc.
Usually the retail path was an OS 9.2.1 retail and the update to 9.2.2;
but machines requiring OS 9.2.2 won't like a 9.2.1. Sometimes, since
a drag and drop is not driven by installer software, you can use older.
But machine specific bits, some critical for graphic card drivers & etc,
would be likely missing unless the software used offered that support.
If you can find one of these, it may work = note, out of stock:
691-3638-A Apple G3/G4 9.2.2 (CD) System Software
{This is a Mac OS 9.2.2 full installation CD, color Grey.}
These do not come in retail packaging.
http://www.welovemacs.com/6913638a.html
Have fun, even if it isn't exactly as planned.
Good luck & happy computing!
{ edited }

Solaris 11 Bare Metal Backup and Restore

Similar Messages

Maybe you are looking for