Solaris 11: configuring/installing/verifying zone: dataset does not exist

Hello all, I am working my way through setting up a dataset via the instructions listed here
http://docs.oracle.com/cd/E23824_01/html/821-1460/z.conf.start-85.html
http://docs.oracle.com/cd/E23824_01/html/821-1460/z.inst.task-2.html
I am now trying to verify my zone (*zoneadm -z stfsun1 verify*) and I get the following error message:
"*could not verify zfs dataset waas/stfsun1: dataset does not exist*
*zoneadm: zone stfsun1 failed to verify*"
I did a search but nothing of benefit showed up. Can anyone point me in the right direction?
Edited by: thisisbasil on May 22, 2012 9:04 AM

zonecfg -z stfsun1 info
zonename: stfsun1
zonepath: /zones/stfsun1
brand: solaris
autoboot: true
bootargs: -m verbose
file-mac-profile:
pool:
limitpriv: default,sys_time
scheduling-class: FSS
ip-type: exclusive
hostid: 80825649
fs-allowed:
[max-sem-ids: 10485200]
fs:
     dir: /usr/local
     special: /opt/local
     raw not specified
     type: lofs
     options: []
anet:
     linkname: net0
     lower-link: auto
     allowed-address not specified
     configure-allowed-address: true
     defrouter not specified
     allowed-dhcp-cids not specified
     link-protection: mac-nospoof
     mac-address: random
     mac-prefix not specified
     mac-slot not specified
     vlan-id not specified
     priority not specified
     rxrings not specified
     txrings not specified
     mtu not specified
     maxbw not specified
     rxfanout not specified
anet:
     linkname: net1
     lower-link: auto
     allowed-address not specified
     configure-allowed-address: true
     defrouter not specified
     allowed-dhcp-cids not specified
     link-protection: mac-nospoof
     mac-address: random
     mac-prefix not specified
     mac-slot not specified
     vlan-id not specified
     priority not specified
     rxrings not specified
     txrings not specified
     mtu not specified
     maxbw not specified
     rxfanout not specified
device:
     match: /dev/wifi/*
     allow-partition not specified
     allow-raw-io not specified
device:
     match: /dev/ipnet/*
     allow-partition not specified
     allow-raw-io not specified
device:
     match: /dev/*dsk/*
     allow-partition not specified
     allow-raw-io: true
dedicated-cpu:
     ncpus: 1
     importance: 10
capped-memory:
     physical: 1G
     [swap: 2G]
     [locked: 500M]
attr:
     name: comment
     type: string
     value: "This is the CodeTEST work zone."
dataset:
     name: waas/stfsun1
     alias: stfsun1
rctl:
     name: zone.max-swap
     value: (priv=privileged,limit=2147483648,action=deny)
rctl:
     name: zone.max-locked-memory
     value: (priv=privileged,limit=524288000,action=deny)
rctl:
     name: zone.max-sem-ids
     value: (priv=privileged,limit=10485200,action=deny)
Edited by: thisisbasil on May 22, 2012 9:56 AM

Similar Messages

  • Lucreate zfs BE dataset does not exist

    Hi guys,
    I'm trying to upgrade a Solaris 10 full zfs with liveupgrade but unfortunatly after one day search and after re-reading all sunDocs I block on and I cannot create a new BE.
    The final objective is to have the server on release 10 10/09 for VDI3.1.1
    If someone get an idea would be so great.
    tks
    Please find here all informations:
    SunOS lima 5.10 Generic_142900-02 sun4v sparc SUNW,Sun-Blade-T6340
    Solaris 10 10/08 s10s_u6wos_07b SPARC
    NAME USED AVAIL REFER MOUNTPOINT
    rpool 15.0G 119G 94K none
    rpool@install 0 - 94K -
    rpool/ROOT 5.83G 119G 18K legacy
    rpool/ROOT@install 0 - 18K -
    rpool/ROOT/s10s_u6wos_07b 5.83G 113G 5.71G /
    rpool/ROOT/s10s_u6wos_07b@install 127M - 5.70G -
    rpool/ROOT/s10s_u6wos_07b@sol10_u8 394K - 5.71G -
    rpool/ROOT/sol10_u8 0 119G 5.71G /.alt.tmp.b-.7.mnt/
    rpool/dump 2.00G 119G 2.00G -
    rpool/export 112K 1024M 20K /export
    rpool/export@install 16K - 20K -
    rpool/export/home 75.5K 1024M 56.5K /export/home
    rpool/export/home@install 19K - 31K -
    rpool/flar 4.38G 3.62G 4.38G /var/flar
    rpool/flar@install 67K - 68K -
    rpool/opt 134M 890M 133M /opt
    rpool/opt@install 200K - 89.0M -
    rpool/tarantella 2.61G 397M 1.11G /opt/SUNWvda
    rpool/tarantella@install 491M - 491M -
    rpool/tarantella/var 1.02G 397M 1.02G /var/tarantella
    Boot Environment Is Active Active Can Copy
    Name Complete Now On Reboot Delete Status
    old yes yes yes no -
    sol10_u8 no no no yes -
    The errors :
    root@ lima #lucreate -n sol10_u8
    Analyzing system configuration.
    Comparing source boot environment <old> file systems with the file
    system(s) you specified for the new boot environment. Determining which
    file systems should be in the new boot environment.
    Updating boot environment description database on all BEs.
    Updating system configuration files.
    Creating configuration for boot environment <sol10_u8>.
    Source boot environment is <old>.
    Creating boot environment <sol10_u8>.
    Cloning file systems from boot environment <old> to create boot environment <sol10_u8>.
    Creating snapshot for <rpool/ROOT/s10s_u6wos_07b> on <rpool/ROOT/s10s_u6wos_07b@sol10_u8>.
    Creating clone for <rpool/ROOT/s10s_u6wos_07b@sol10_u8> on <rpool/ROOT/sol10_u8>.
    Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/sol10_u8>.
    ERROR: cannot open ' ': dataset does not exist
    ERROR: cannot mount mount point </.alt.tmp.b-.7.mnt/opt> device < >
    ERROR: failed to mount file system < > on </.alt.tmp.b-.7.mnt/opt>
    ERROR: unmounting partially mounted boot environment file systems
    ERROR: cannot mount boot environment by icf file </etc/lu/ICF.2>
    ERROR: Unable to mount ABE <sol10_u8>
    ERROR: Unable to clone the existing file systems from boot environment <old> to create boot environment <sol10_u8>.
    ERROR: Cannot make file systems for boot environment <sol10_u8>.

    In fact the /opt were seperated to include this in the / resolve the issue.

  • Configuration file "config\jazn.xml" does not exist

    I have just installed 10g and am trying to setup iSQL*PLUS/dba. I found directions here http://download-west.oracle.com/docs/cd/B12037_01/server.101/b12170/ch3.htm#BCEIHEJF, however, when I try to start the JAZN shell or run the command line to create the dba user, I receive this error:
    oracle.security.jazn.JAZNRuntimeException: Configuration file "config\jazn.xml"
    does not exist. Check your JAAS configuration settings.
    at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
    at oracle.security.jazn.JAZNConfig.access$100(Unknown Source)
    at oracle.security.jazn.JAZNConfig$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jazn.JAZNConfig.getJAZNPropertiesNoCheck(Unknown Source)
    at oracle.security.jazn.JAZNConfig.<init>(Unknown Source)
    at oracle.security.jazn.JAZNConfig.initJAZNSingleton(Unknown Source)
    at oracle.security.jazn.JAZNConfig.getJAZNConfig(Unknown Source)
    at oracle.security.jazn.util.Dbg$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jazn.util.Dbg.getJAZNProperty(Unknown Source)
    at oracle.security.jazn.util.Dbg.getBoolJAZNAndSystemProperty(Unknown Source)
    at oracle.security.jazn.util.Dbg.<clinit>(Unknown Source)
    at oracle.security.jazn.JAZNConfig.fileExists(Unknown Source)
    at oracle.security.jazn.JAZNConfig.getDefaultJAZNConfigFilePath(Unknown
    Source)
    at oracle.security.jazn.JAZNConfig.access$000(Unknown Source)
    at oracle.security.jazn.JAZNConfig$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jazn.JAZNConfig.getJAZNPropertiesNoCheck(Unknown Source)
    at oracle.security.jazn.JAZNConfig.<init>(Unknown Source)
    at oracle.security.jazn.JAZNConfig.initJAZNSingleton(Unknown Source)
    at oracle.security.jazn.JAZNConfig.getJAZNConfig(Unknown Source)
    at oracle.security.jazn.tools.Admintool.refresh(Unknown Source)
    at oracle.security.jazn.tools.Admintool.init(Unknown Source)
    at oracle.security.jazn.tools.Admintool.main(Unknown Source)
    User does not exist in system.
    Has anyone run in to this and found a solution? Is there something more that I need to do? I know nothing about JAAS.

    I have the same problem. Did you resolve this problem?

  • 11g R2 -silent install: "Template General_Purpose.dbc does not exist"

    I'm working in an environment where no X-Windows/GUI is permitted; therefore, I'm attempting to perform a -silent install of 11g R2 on RHEL 5.3 and am finding the screen output to my terminal window less than helpful. Fortunately, a thorough review of the install actions log provides what appears to be my problem.
    The screen output I receive is as follows (I've added some line breaks to make it more readable):
    (oracle@blade2-1 database)$ cd /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database
    (oracle@blade2-1 database)$ ./runInstaller -silent -responseFile /home/oracle/ResponseFiles/11gR2/ORCL11GD_enterprise_11201.rsp
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 80 MB. Actual 91127 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 8000 MB Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-09-14_01-25-28PM. Please wait ...
    (oracle@blade2-1 database)$
    You can find the log of this install session at:
    /u01/app/oracle/oraInventory/logs/installActions2009-09-14_01-25-28PM.log
    That's it - no indication as to whether the installation was successful or failed or whether the NETCA/DBCA/etc. were successful or not.
    I found that a listener existed after the install:
    (oracle@blade2-1 database)$ ps -ef | grep tns
    oracle 22597 1 0 13:29 ? 00:00:00 /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr LISTENER -inherit
    My instance didn't appear to be up, though:
    (oracle@blade2-1 database)$ ps -ef | grep ORCL11GD
    oracle 22776 19142 0 13:39 pts/0 00:00:00 grep ORCL11GD
    So, I checked the /u01/app/oracle/oraInventory/logs/installActions2009-09-14_01-25-28PM.log to see what it revealed. It shows me the following for the DBCA:
    INFO: Started Plugin named: Oracle Database Configuration Assistant
    INFO: Found associated job
    INFO: Starting 'Oracle Database Configuration Assistant'
    INFO: Starting 'Oracle Database Configuration Assistant'
    INFO: Executing DBCA
    INFO: Command /u01/app/oracle/product/11.2.0/db_1/bin/dbca -silent -createDatabase -templateName General_Purpose.dbc -sid ORCL11GD -gdbName orcl11gd.blade2-1.mycompany.com -emConfiguration LOCAL -storageType FS -datafileDestination /u02/oradata -datafileJarLocation /u01/app/oracle/product/11.2.0/db_1/assistants/dbca/templates -responseFile /home/oracle/ResponseFiles/11gR2/ORCL11GD_enterprise_11201.rsp -characterset WE8ISO8859P15 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.2.0/db_1/install/oratab -automaticMemoryManagement true -totalMemory 2048 -maskPasswords false -oui_internal
    INFO: ... GenericInternalPlugIn.handleProcess() entered.
    INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
    INFO: ... GenericInternalPlugIn: checking secretArguments.
    INFO: ... GenericInternalPlugIn: starting read loop.
    INFO: Read: SYS_PASSWORD_PROMPT
    INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
    INFO: Read: SYSTEM_PASSWORD_PROMPT
    INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
    INFO: Read: DBSNMP_PASSWORD_PROMPT
    INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
    INFO: Read: SYSMAN_PASSWORD_PROMPT
    INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
    INFO: End of argument passing to stdin
    INFO: Read: Template General_Purpose.dbc does not exist. Please specify an existing template for database creation.
    INFO: Completed Plugin named: Oracle Database Configuration Assistant
    INFO: Oracle Database Configuration Assistant failed.
    INFO: Oracle Database Configuration Assistant failed.
    I don't see a template named "General_Purpose.dbc" in the $ORACLE_HOME/dbca/templates directory:
    (oracle@blade2-1 database)$ cd /u01/app/oracle/product/11.2.0/db_1/assistants/dbca/templates
    (oracle@blade2-1 database)$ ls -lrt
    total 23216
    -rw-r--r-- 1 oracle oinstall 11492 Feb 25 2009 New_Database.dbt
    -rwxr-xr-x 1 oracle oinstall 1179648 Aug 14 03:01 example.dmp
    -rwxr-xr-x 1 oracle oinstall 22536192 Aug 14 03:01 example01.dfb
    Any suggestions would be welcomed!

    Hans: None at all, unfortunately.
    Srini: I obtained a copy of the note and read through it. It does look as though I should be able to run the DBCA in -silent mode to create a template, so no GUI needed. Thanks again!
    On a side note: Did anybody else notice the "General_Purpose.dbc" template missing from the $ORACLE_HOME/dbca/templates directory after an 11g R2 software install on RHEL 5.3? I'm beginning to suspect that not all components were installed as expected during the software installation. the oraInstall<Date/Time>.err file is full of errors such as the following:
    java.io.FileNotFoundException: /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database/stage/Components/oracle.rdbms.install.seeddb/11.2.0.1.0/1/DataFiles/filegroup2.jar (No such file or directory)
    All of these errors are complaining about only the following 4 compoments:
    - oracle.ctx
    - oracle.sysman.console.db
    - oracle.owb.rsf
    - oracle.rdbms.install.seeddb
    Upon investigation, I found that there is no oracle.ctx, oracle.sysman.console.db, oracle.owb.rsf, or oracle.rdbms.install.seeddb under /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database/stage/Compoments. Instead, the grouping is located under /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk2/database/stage/Components.
    It seems that I may have staged the media incorrectly in two separate directories. Should I have unzipped both files into the same directory instead of separating them out?

  • Error during install PCK - Group GUESTS does not exist

    Hi,
    I'm installing PCK 3.0 SR1 on Web AS 6.40 Java SR1 and getting an error during phase "Create J2EE User". The following error is from the java.log file:
    --- INITIALIZE ---
    --- STARTING SETTING PROPERTIES ---
    --- STARTING USER CREATION ---
    com.sap.security.core.server.userstore.UserstoreException: Could not add user pckuser to group GUESTS
         at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:314)
         at com.sap.engine.services.security.userstore.context.GroupContext.addUserToGroup(GroupContext.java:168)
         at com.sap.engine.services.security.userstore.RemoteGroupContextImpl.addUserToGroup(RemoteGroupContextImpl.java:112)
         at com.sap.engine.services.security.userstore.RemoteGroupContextImplp4_Skel.dispatch(RemoteGroupContextImplp4_Skel.java:86)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
    Caused by: com.sap.security.api.NoSuchGroupException: Group with id="Group "GUESTS" does not exist." does not exist
         at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:853)
         at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:309)
         ... 12 more
    predecessor system -
    com.sap.security.core.server.userstore.UserstoreException: Could not add user pckuser to group GUESTS
         at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:314)
         at com.sap.engine.services.security.userstore.context.GroupContext.addUserToGroup(GroupContext.java:168)
         at com.sap.engine.services.security.userstore.RemoteGroupContextImpl.addUserToGroup(RemoteGroupContextImpl.java:112)
         at com.sap.engine.services.security.userstore.RemoteGroupContextImplp4_Skel.dispatch(RemoteGroupContextImplp4_Skel.java:86)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
    Caused by: com.sap.security.api.NoSuchGroupException: Group with id="Group "GUESTS" does not exist." does not exist
         at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:853)
         at com.sap.security.core.server.userstore.GroupContextUME.engineAddUserToGroup(GroupContextUME.java:309)
         ... 12 more
    Has anyone experienced the same problem? what is the solution?
    Thank you.
    Regards,
    Robert

    Hi Robert,
    Check note 792456.
    Regards,
    Vijay

  • ECC 6.0 IDES install requires disk that does not exist?

    Hello all,
    When doing the installation, there is one portion that asks for:
    Java Component Netweaver 7.0 SR3
    I am doing an ECC 6.0 IDES install for Oracle/ Linux.
    In the listing, I only see:
    51033513 NW 7.0 SR3 SP14 Java Based SW Comp
    *but this does not work *
    What is the correct one to use?
    TIA

    Hi and thanks,
    In the past, I have installed an ECC 6.0 IDES (ABAP Stack only) on an Oracle/Linux system. This worked out fine.
    Now, I am using the ECC 6.0 IDES collection set again except I am trying to install all of the EP Content (XSS - ESS/MSS)  as well (requiring both ABAP + JAVA stacks).
    So, again, I am trying to do ECC 6.0 IDES and EP on the same box but in one installation run (one SID and not 2 different SIDs)
    Is this possible?
    Also, you mentioned:
    >
    vamshi polasa wrote:
    >
    You need to specify the BS java component and the Java components path. You can downlad the files from the markt place.
    For the Linux ECC 6.0 IDES, what would the names of these items??? From the entire list of CDs, which ones would I choose?
    TIA

  • DB instance Install stops - account user does not exist

    Hi all,
    We had a problem with our hostname being too long (15 characters), and did not realize it until we were in the middle of the database instance installation and disp+work.exe could not start. We tries all tips about restarting SAPInst, rebooting server etc. to no avail.
    We then changed the hostname on Windows 2003, changed the hostnames in the SAP profiles and changed the service via sapstartsrv.exe. When we started SAPInst again, user account "old hostname"\<sapsid>adm did not exist. We need to change the user account to reflect the new hostname. How can this be done? We have tried the user administration in Windows, but did not find a way.
    Please let me know if you have any ideas.
    Regards,
    Thomas

    nevermind...
    null

  • The sharemgr utility does not exist on my system

    OK... I need to use the sharemgr utility and it's not even installed on my Solaris 10 sparc system. It simply does not exist. There isn't even a man page on it. I installed the Entire Distribution plus OEM support. Anybody know how to get this utility installed? My release info is as follows:
    Solaris 10 10/08 s10s_u6wos_07b SPARC
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 27 October 2008

    This question is partially answered in the thread listed below. It also appears the sharemgr utility has not been ported to Solaris 10 Sparc, it's only included in Open Solaris. The file system/zfs/sharing stuff is still in flux and is being moved over to the Sparc is phases. Looks like some of the code has creeped into the Sparc while referencing utilities that have not been moved over yet.
    http://forums.sun.com/thread.jspa?messageID=10551779

  • Printpocessor does not exist

    I have the following problem. After updating Windows on three computer the printerspooler stopped and the printers disappeared. Restarting the printerspooler did not work. I deleted all the drivers and reinstalled my printer software (Samsung Laser and HP PHotosmart 5510). The Photosmart 5510 does have I yello '!' when looking at the printers in the configuration screen. Reinstalling without firewall did not solve the problem.
    The installation software says their is no connection. However I can ping the printer and when I type the IP adress in a browser I see the printer and it tells the wireless connection is ok. However I cannoit see the printer when going to word of notepad. When I tried to add the printer form Notepad I got the following error: (translated from Dutch tot English:
    Cannot install the printer, printprocessor does not exist.
    How do I solve this problem?

    I hope I can help but I need to ask a few questions first. When you say updating Windows, do you mean Windows 7, Windows XP, or Windows Vista?  Also, is it that the problem you are having is with the print spooler or is it that the software will not re-install?  I assume the print spooler was the original problem and now you can not install the printer.  What is the IP address of the printer?  Some can be valid and some not.
    Here is a document from Microsoft regarding the PrintProcessor error message. Answer those questions for me if this doesn't help.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Error in sender file adapter: source directory does not exist

    Hi,
    The PI system is 7.11
    I've created sender file adapter with following details:
    Transport Protocol : File System
    Source directory: /interfaces/In
    I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
    But still i get in Communication Channel Monitoring the following error:
    "Configured Source directory "/interfaces/In" does not exist.
    (i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
    Any suggestions as to what is wrong?
    kr
    Robert

    Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
    But wanted to try if that works..
    Also check directory name , path again as this is case sensitive...
    --Divyesh

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

  • PS Elements 11 says Redemption Code does not exist

    Just bought and have activated receipt. Install says Redemption Code does not exist.

    See if this FAQ helps you:
    http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

  • /grub/pxegrub does not exist, invalid boot image

    hi all
    i'm having a small prob when trying to jumpstart an x86 client, with my sparc server.
    any help ?
    i think it's simple, i have to install x86 bootfiles on the server, or something, but how to do that ?
    thanks
    here's my error in detail :
    [599][root@srv-parnode2][Tools]> ./add_install_client \
    -d \
    -e 00:e0:81:58:af:c8 \      -s 10.211.0.2:/DATA2/export/jumpstart/install \
    -s 10.211.0.2:/DATA2/export/jumpstart/install \
    -c 10.211.0.2:/DATA2/export/jumpstart/config \
    -p 10.211.0.2:/DATA2/export/jumpstart/config i86pcadd_install_client: /DATA2/export/jumpstart/install/boot/grub/pxegrub does not exist, invalid boot image
    [601][root@srv-parnode2][Tools]>

    nm, i found my prob, you can close the thread :)

  • The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

    I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
    The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
    Thanks,
    Venu S.
    Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

    Hi Venu S,
    Based on my research, you might encounter a known issue, please try the hotfix in this KB:
    http://support.microsoft.com/kb/928385
    Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
    The version of Windows Server you are using
    The result of SELECT @@VERSION
    The scenario when you get this error
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

    Hi,
    I'm having issues with the report created using SSAS cube.
    An error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
    The Operator_Performance cube either does not exist or has not been processed.
    I have searched through internet and tried all the solutions, but didn't worked for me.
    SSRS services running as NETEWORK SERVICE user.
    SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
    Can any one please help me.
    Thank You,
    Praveen.
    Praveen

    Hello,
    Have you tried it to execute on report manager , Is your data source properly configured in Report Manager  and your report is mapped with Datset correctly?
    Have you executed the Dataset query MDX editor  now?
    What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data  are failing on IE , on the other hand these reports are running fine Google
    Chrome
    blog:My Blog/
    Hope this will help you !!!
    Sanjeewan

Maybe you are looking for

  • Some Doubts in Objects

    Hello SDN Community..!! I have some theoritical doubts in XI objects. <b>Question 1:</b> what i know about Integration Process is: Integration Processes are defined in integration Repository. Processes defined in Integration Repository are used as se

  • Performance issue with using MAX function in pl/sql

    Hello All, We are having a performance issue with the below logic wherein MAX is being used in order to get the latest instance/record for a given input variable ( p_in_header_id).. the item_key is having the format as : p_in_header_id - <number gene

  • How do I replace -| symbol with paragraph mark?

    I edit a newsletter. Some of the contributors send their articles inline (not as attachments). Some of them have a non printing special character that looks like a bent left arrow instead of a paragraph mark. I think it is one of the first ascii char

  • IPhone SIM in a GoPhone?

    There's another post on this topic, but nothing really solid for an answer. Is it possible to buy a cheap GoPhone and use the iPhone's SIM card in it? There are times when I would prefer not carrying a $600 phone around...ie. beach, amusment park, et

  • Using reg exp's in filters

    We have followed the recommendation to convert the cache database from Derby to MSSQL. There seems to be an un-documented disadvantage in this: regular expressions are no longer supported in filters ! Can anyone confirm this ? We are running TES 6.1.