Solaris 3/05 no longer boots after installing 113000-07

I can't get Solaris 10 3/05 to boot anymore after installing patch 113000-7. The patch was installed by Sun's update connection software.
The computer is a Dell Dimension XPS T600 with 512MB ram.
I get the error:
Error 28: Selected item cannot fit into memory.

I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

Similar Messages

Very slow boot after installing 10.10.3

insanely slow boot after installing 10.10.3, it takes 10times longer compare to 10.10.2, using MBA 2014

Open System Preferences, select Startup Disk, and make sure your internal drive is selected as the startup disk. Then click restart!
This worked for me, personally with the same issue.
Good luck!

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

My telus email no longer works after installing the new os Yosemite

my telus email no longer works after installing the new os Yosemite

This is a problem between Telus and Yosemite. Telus, of course, blames Apple.
Check the box that says "Allow insecure authentication" That will get your email working.
However, this box will get un-checked when you stop start Mac Mail. The next time you start Mail, you'll have to re-check it for each Telus account. (This is the bit that Apple needs to fix.)

Windows 8.1 Pro not booting after install of Hyper V - ASUS z87 + intel 4670K

Hi,
I am running windows 8.1 pro on a intel 4670K 4th Gen Haswell CPU and ASUS z87 plus motherboard. 16gb of kingston hyperx ddr1600 memory.
I have enabled virtualisation technology in the bios. CPU has SLAT.... or Extended Page Table, as intel likes to refer to it.
When I install HyperV platform and management tools the computer configures and reboots
AFter reboot it brings up the blue window image and spinning circle of dots for a while then reboots. It does the same thing again and then reboots and goings into repair mode and asks me to do a system restore. It then restores to before they HyperV install.
I've tried turning off xHCI mode (i.e USB 3.0) in the bios as this seemed to be a known issue with some gigabyte boards. This did not rectify the issue
Updated to latest asus mainboard bios 1405. Same issue still occurs upon install of hyper V.
Automatic repair does not work and I have to restore from system restore point.
I performed a clean boot after installing the feature and it still couldnt boot to windows.. it just sits at windows logo and then restarts a few times and then launches the startup repair. Once the startup repair begins, the only way I can get into windows
is restoring to a system restore point from before the hyperv feature install.
Please see the following logs which may have further information:
CBS Log
https://skydrive.live.com/redir?resid=1F523A0B8734322C!685&authkey=!AGMjUfosLFpzYNI
Setuperr
https://skydrive.live.com/redir?resid=1F523A0B8734322C!682&authkey=!AKS8Jb1S6W2IAH8
Windows update
https://skydrive.live.com/redir?resid=1F523A0B8734322C!683&authkey=!AJdWKuKj4negBoQ
Windowsupdate(1)
https://skydrive.live.com/redir?resid=1F523A0B8734322C!684&authkey=!APplVjuLpNZW_AY
I logged a job with asus support and their response was:
"Clear CMOS and ensure virtualisation technology is turned on in BIOS. If it still doesn't work, seek assistance from Microsoft"
Previously asked this question but took a while to get back to update with the logs and it was listed as Answered.
This issue is still existing and I'd appreciating any assistance.
Simon

Hi Simon,
Thank you for uploading the Log files.
According to the log files, no actuate clue can be found.
So, I suggest you upload the dump file so that we can help you analyze them.
Automatic Memory Dump Settings on Windows 8:
http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
It also applies to windows 8.1.
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing,
privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

Hi Jeff,
Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
Hope it goes well,
Rick

Some USB ports no longer working after installing Mountain Lion?

Some of my USB ports are no longer working after installing Mountain Lion onto my 21' 2011 iMac. I used to plug in my iphone 4S and charge it, or transfer files onto my iPad but none of the ports no longer work to do this. Funnily enough, other equipment plugged into the works. I have tried changing the cable. Any ideas?

In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
bd

Tapping no longer works after installing Windows 7 RC using boot camp.

After installing it i found that tapping to click no longer works in either OS X or Windows. I've checked system preferences and it is still ticked and all other gestures work except double tap and single tap. How do i fix this?

OK, here's what you do. I'm assuming that you've got the partition laid out and your drivers ready:
Insert your Win 7 Upgrade DVD and hold down the C key while restarting the Mac This boots Setup
Run through Setup once, formatting your Boot Camp volume. For this go-around, use a Custom install
You will get to a point where you are asked for your Product Key. Skip this request now!
Install the Boot Camp software
Next, go back to your Win 7 Upgrade DVD and allow the AutoRun. Click Install Now on the window that opens.
You're in Setup again. This time, do an Upgrade. You should be back at your Desktop when this runs through. If asked for the key again, skip it.
Click Start > Computer
Now click System properties
At the bottom of the System Properties window is a link, Change product key. Click this link.
Enter the Upgrade key now while you walk through activation. It should be accepted this time.
We've just tricked Windows into thinking it was upgraded, thereby fulfilling the license requirement. This method works because the installer makes no check as to what specific versions of Vista or 7 the upgrade will qualify on. In this way, it is possible to "clean install" an upgrade copy for about $100 less than a full copy.
Nate

Leopard USB install no longer boots after software update

Hi all,
I have recently installed Leopard onto a USB partition in order to perform maintenance on my main Leopard installation. Installation proceeds without a problem however after downloading software updates the USB partition will not boot successfully, despite there being no problems with the disk / volume structures / apparently anything at all. In desperation I also tried to install Tiger, which worked, however I have the same problem after updating - it will not boot! I don't think my hardware is at fault - Techtool Pro tells me all is in order.
Has anyone had this problem and if so, how did you fix it?
Thanks,
Jason

I just installed Leopard onto a USB 2.0 external hard drive for a dual-boot. It booted fine at 10.5.1 but is taking ridiculously long to boot after 10.5.2 (I just got it to finally boot after the update while waiting more than 40 minutes!).
It seems that you may want to attempt booting several times - maybe turning off the machine in between or booting to the internal OS first and then to the external. Can't help you much beyond that as this is my introductory experience with this mess.

Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5

It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread. I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1). It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz. It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down). Then it had trouble booting into windows. I ran startup repair to no avail and decided to do a sytem restore. My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine. I went back to that point and the machine worked fine again. Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8. I did another system restore and have not put iTunes back on. The system is working fine. I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer? I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch. Anyone else seeing this? Apple employees...a little help here? Any input?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

External monitor no longer works after installing iLife '09

Before, the external monitor (Apple Cinema HD display) connected via DVI to Mini-DVI adapter was working fine. However, after installing iLife '09 and restarting, the iMac will no longer detect the external display attached to it. I even tried installing a different (but same model) display but it still will not detect.

I'm not sure how installing an application would cause that to happen. Have you shut down (powered off) the iMac completely, and then restarted, since this problem occurred?
Some display settings are stored in PRAM, so if you have not already, try resetting PRAM
http://support.apple.com/kb/HT1379
If that does not help, you can try disconnecting the iMac from power and reconnecting it, using the reset SMC (power management) procedure.
http://support.apple.com/kb/HT1543
When you reconnect it, initially connect the iMac to a wall outlet, by itself. Leave all peripherals disconnected, except for your USB keyboard/mouse. Make sure it is working properly, then connect only the external display.
If it still does not work, as a test, start up with your Mac OS X installation disc. You are not installing anything, but note if the second display is displaying the background image or not when you are booted from a different system.

Solaris 3/05 no longer boots after installing 113000-07

Similar Messages

Maybe you are looking for