Solaris 8 container error
During the Installation of the solaris 8 zone I get this message. Anyone familiar with this?
[Fri Feb 6 09:11:16 CST 2009] Postprocess: Applying p2v module S33_fix_vfstab
[Fri Feb 6 09:11:17 CST 2009] Postprocess: Applying p2v module S34_fix_inittab
[Fri Feb 6 09:11:17 CST 2009] Postprocess: Applying p2v module S35_fix_crontab
[Fri Feb 6 09:11:17 CST 2009] Postprocess: Applying p2v module S36_fix_pam_conf
[Fri Feb 6 09:11:17 CST 2009] Postprocess: Applying p2v module S40_setup_preload
ln: cannot create /usr/lib/secure/64/s8_preload.so.1: No such file or directory
[Fri Feb 6 09:11:17 CST 2009] Postprocess: ERROR: p2v module S40_setup_preload failed: 0
[Fri Feb 6 09:11:17 CST 2009] Postprocess: ERROR: Postprocessing failed.
[Fri Feb 6 09:11:17 CST 2009] Result: Postprocessing failed.
[Fri Feb 6 09:11:17 CST 2009]
[Fri Feb 6 09:11:17 CST 2009] Result: *** Installation FAILED ***
during netboot for jumpstart installation bpgetfile-call fails because it uses wrong netmask
Senthilkumar
Similar Messages
-
Solaris container error - patch
Hi guys,
I tried to install the flar archive and got the following error. i have done the same way to my other solaris 8 box and that container is working fine.
this is my error.
Checking installed patches...
One or more patch packages included in
109147-44 are not installed on this system.
Patchadd is terminating.
[Mon Dec 13 13:38:20 EST 2010] S20_apply_patches: Unpacking patch: 111023-03
[Mon Dec 13 13:38:20 EST 2010] S20_apply_patches: Installing patch: 111023-03
Checking installed patches...
One or more patch packages included in
111023-03 are not installed on this system.
Patchadd is terminating.
[Mon Dec 13 13:38:22 EST 2010] S20_apply_patches: Unpacking patch: 111431-01
[Mon Dec 13 13:38:22 EST 2010] S20_apply_patches: Installing patch: 111431-01
Checking installed patches...
One or more patch packages included in
111431-01 are not installed on this system.
Patchadd is terminating.
[Mon Dec 13 13:38:23 EST 2010] S20_apply_patches: Unpacking patch: 112605-04
[Mon Dec 13 13:38:23 EST 2010] S20_apply_patches: Installing patch: 112605-04
Checking installed patches...
ERROR: This patch requires the following patches
which have not been applied to the system:
111431-01 111023-02
Patchadd is terminating.
[Mon Dec 13 13:38:24 EST 2010] Postprocess: ERROR: p2v module S20_apply_patches failed: 0
[Mon Dec 13 13:38:24 EST 2010] Postprocess: ERROR: Zone boot failed
[Mon Dec 13 13:38:24 EST 2010] Postprocess: ERROR: Postprocessing failed.
[Mon Dec 13 13:38:26 EST 2010] Result: Postprocessing failed.
[Mon Dec 13 13:38:26 EST 2010]
[Mon Dec 13 13:38:26 EST 2010] Result: *** Installation FAILED ***
[Mon Dec 13 13:38:26 EST 2010] Log File: /var/tmp/sambo.install.15654.log
do i need to apply those patched to my globla zone ?
thankshi,
apply the patches directly to the global zone.
it should automatically get applied to the non-global zone..
regards,
Raj -
Disk Access Failed while Installing Solaris Container.
I have setup 5 guest domains together with the Control Domain.
$ ldm list
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 4G 0.8% 2d 2h 15m
secondary active -t--v 5000 4 2G 0.5% 3h 5m
dmz active -t--- 5001 8 2G 0.0% 46m
sunray inactive -----
application inactive -----
identity active -t--- 5002 4 4G 0.1% 1h 2m
In each of the guest domain, I plan to install a number of Solaris Containers to run different applications. While installing one Solaris container (zoneadm �z <zone name> install) in dmz domain, I start the installation/configuration (either zoneadm �z <zone name> install or zlogin �C <zone name>) of another Solaris container in identity domain. Everything starts OK until half way I get an error message as follow:
Jun 13 18:33:16 dmz vdc: NOTICE: [1] disk access failed.
The installation of the Solaris Container in dmz halts as soon as I see the message above. Nothing will work except a force stop in the Control Domain using ldm stop �f dmz and restart.
What happen to the Solaris Container installation/configuration in identity domain? It either continues the process without error or fails with the same error message shortly after. For example,
Jun 13 18:33:24 identity vdc: NOTICE: [1] disk access failed.
The vdisks for each guest domain are setup by following the steps on section �Using ZFS Over a Virtual Disk� in LDoms 1.0 Administration Guide. Each guest domain is booted from a disk image in the Control Domain and has two 9GB data vdisks (mapped to two physical 9GB disks on A5200 disk array) running ZFS striping. Each guest domain vdisks are serviced by a separate vdisk server.
Any idea?I am not sure if multiple virtual disk servers are officially supported under current LDoms release.
I had tried using only one virtual disk server. The same problem exhibited. I thought may be the vds was not able to keep up with the virtual disk I/O. That's why I setup multiple vds. -
The boot configuration data for your Pc is missing or contains errors: error code 0x000014c
Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Setup Cluster using Solaris Container data service
We have a two-node cluster that we would like to use to create either a zone cluster or use the Solaris Container data service that would create a scalable (or multiple master) data service of two zones, one on each node. We have an app running in the zone, CiscoWorks, that has a local database of jobs that are scheduled to run to configure Cisco switches. I was curious how we setup the storage. If each zone is running on local disks, how do the zones stay in sync and the database updated with job information? Would I setup a device group of the disks where the zones will reside on each node? Can I use SAN as the local disk so the zones can be replicated to a Disaster Recovery location?
Thanks for any help,
ChuckChuck,
Sadly, I think I'm going to make your implementation decisions a lot more complicated because there are three ways you can use zones within Solaris Cluster.
1. Create a failover zone using the HA Solaris Container Data Service. Here the zone root moves between the cluster nodes as the zone fails over.
2. Create static zones between with resource groups can migrate. Each zone root is local the the physical node. However, the configuration of the zones can be subtly different.
3. Create a virtual cluster using static zones within which resource groups can migrate. Each zone root is local the the physical node. However, the configuration of the zones are forced to be the same.
Note also, that a ZFS zpool can only be mounted on one node or zone at anyone time, although it can be mounted read/write in one zone and read-only in other zones on the same node (IIRC).
I would be inclined to put your database into an HA configuration, i.e. one that runs on one node at any one time. I would then constrain that in a zone cluster that is bound to a project with restricted resources, i.e. CPUs and memory. Any other tiers of the application, could then be placed either in the global zone (main cluster) or placed in another zone cluster and equally constrained.
I don't know if that's any help. I can recommend a good book on the subject <shameless plug "Oracle Solaris Cluster Essentials"/>. The example chapters should be of help.
Regards,
Tim
--- -
Error in using BAPI_CONFEC_CREATE : Interface data contains Errors
Hi,
I am using this BAPI BAPI_CONFEC_CREATE to create confirmations locally in SRM for a PO. I am following Documentation available for this BAPI. But when I excuted with below data getting error " INTERFACE DATA CONTAINS ERRORS"
I am passing these data:
Hedaer: Ref_doc_no - PO Number
Description:
Process Type: "CONF"
Header_cust: parent_guid : PO GUID
Item: Parent: PO Header GUID
PO Number: PO number
PO GUID: PO HEDAER GUD
PO ITEM Number: PO item Number
PO_ITEM_GUID: po item guid
Account:
Parent_GUID : PO Item GUID
G/L acct : Po G/l acct
cost center : PO cost center
what are the data sholud be passed to this BAPI?
Am I missing any input data to this BAPI? Please let me know.
Am I using correct Function Module to create a confirmation for a PO in Stand alone scenario?
Thanks.
Shears
Edited by: Shears80 on Sep 10, 2010 1:39 AMHi Matt
I'm using the same FM but it's not working. Can you please share what data you are passing in the FM.
After debugging I found that my confirmation is getting created but it's not getting saved.
Please enlighten me.
Thanks
Ankit -
Adding a window to a container: Error
Hello there,
Im facing a problem with my program.My program is about a Car Rental System and I am using GUI for the interface. From the main(CarRental) program,when user click one of the menu, there is another interface will appear for user to enter details.The problem is,my main (CarRental)program is running,click the first menu,then another interface open,but wen user enter details n click buttons , it is not even working. Below is my program:
//This is main menu program
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import javax.swing.JFrame;
public class CarRental extends JFrame implements ActionListener{
JFrame f;
JLabel l1,l2,l3,choice;
JPanel p1,p2,p3,p4,p5,p6,p7,p8,p9;
JButton btnA,btnB,btnC,btnD,btnE,btnF;
Connection conn;
Statement stmt;
ResultSet rs;
public CarRental(){
p1=new JPanel();p2=new JPanel();p3=new JPanel();
p4=new JPanel();p5=new JPanel();p6=new JPanel();
p7=new JPanel();p8=new JPanel();p9=new JPanel();
f=new JFrame("New Rental Record");
l1=new JLabel("........::: Car Rental System :::.........");
l2=new JLabel("*******************************************************");
choice=new JLabel("Please select your option:");
btnA=new JButton("[1] New Rental Record");
btnB=new JButton("[2] Update Rental Record");
btnC=new JButton("[3] Search Rental Record");
btnD=new JButton("[4] Delete Rental Record");
btnE=new JButton("[5] Display Rental record");
btnF=new JButton("[6] Exit");
l3=new JLabel("*******************************************************");
f.setLayout(new GridLayout(10,1));
f.pack();
f.setVisible(true);
f.setSize(350,500);
f.setBackground(Color.white);
p1.add(l1);f.add(p1);
p2.add(l2);f.add(p2);
p3.add(choice);f.add(p3);
p4.add(btnA);f.add(p4);
p5.add(btnB);f.add(p5);
p6.add(btnC);f.add(p6);
p7.add(btnD);f.add(p7);
p8.add(btnE);f.add(p8);
p9.add(btnF);f.add(p9);
btnA.addActionListener(this);
btnB.addActionListener(this);
btnC.addActionListener(this);
btnD.addActionListener(this);
btnE.addActionListener(this);
btnF.addActionListener(this);
f.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e)
{System.exit(0);}});
public void actionPerformed(ActionEvent e){
if(e.getSource()== btnA)
{ NewRecord nr=new NewRecord();}
else if(e.getSource()== btnB)
{ updateRecord ur=new updateRecord();}
else if(e.getSource()== btnC)
{ searchRecord sr=new searchRecord(); }
else if(e.getSource()== btnD)
{ deleteRecord dr=new deleteRecord(); }
else if(e.getSource()== btnE){
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException e3) {
JOptionPane.showMessageDialog(null,"ERROR:"+e3.getMessage());
try{
conn=DriverManager.getConnection("Jdbc:Odbc:Car Rental", "", "");
stmt=conn.createStatement();
rs=stmt.executeQuery("Select * from Customer where CustID");
String s=("CustID: CustName: CustAdd: CustPhone: No.of days rent: Rate per rental: \n");
while(rs.next())
s=s+rs.getString(1)+" "+rs.getString(2)+" "+rs.getString(3)+" "+rs.getString(4)+" "+rs.getString(5)+" "+rs.getString(6)+"\n";
JOptionPane.showMessageDialog(null,s);}
catch(SQLException e4){e4.printStackTrace();}}//end of F
//to exit the program
else if(e.getSource()== btnF){
JOptionPane.showMessageDialog(null,"Thank you");System.exit(0);}
else
JOptionPane.showMessageDialog(null,"Invalid Option!");System.exit(0);
}//end of if statement
public static void main(String args[]){
CarRental cr= new CarRental();}//end of main
}//end of main menu
//New Rental program when user selects it
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class NewRecord extends JFrame implements ActionListener{
JFrame f;
Container c;
FlowLayout layout;
JLabel l1,l2,custId,custName,custAdd,custPhone,dayRent,rateRent;
JTextField tid,tname,tphone,tday,trate;
JTextArea tadd;
JButton save,clear,exit;
Connection conn;
Statement stmt;
ResultSet rs;
JPanel p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11;
public NewRecord(){
//super("New Record");
layout = new FlowLayout();
c=getContentPane();
c.setLayout(layout);
p1=new JPanel();p2=new JPanel();p3=new JPanel();
p4=new JPanel();p5=new JPanel();p6=new JPanel();
p7=new JPanel();p8=new JPanel();p9=new JPanel();
p10=new JPanel();p11=new JPanel();
f=new JFrame();
l1=new JLabel("........::: New Rental Record :::.........");
l2=new JLabel("*******************************************************");
custId =new JLabel("Customer ID:");
custName=new JLabel("Customer name:");
custAdd=new JLabel("Customer address:");
custPhone=new JLabel("Customer phone:");
dayRent=new JLabel("Days of rental:");
rateRent=new JLabel("Rate per rental:");
tid= new JTextField(10);
tname=new JTextField(10);
tphone=new JTextField(10);
tadd=new JTextArea(4,30);
tday=new JTextField(5);
trate=new JTextField(10);
save=new JButton("SAVE");
clear=new JButton("CLEAR");
exit=new JButton("EXIT");
f.setLayout(new GridLayout(11,1));
f.setBackground(Color.white);
f.setVisible(true);
f.setSize(600,600);
p1.add(l1);f.add(p1);
p2.add(l2);f.add(p2);
p3.add(custId);p3.add(tid);f.add(p3);
p4.add(custName);p4.add(tname);f.add(p4);
p5.add(custAdd);p5.add(tadd);f.add(p5);
p6.add(custPhone);p6.add(tphone);f.add(p6);
p7.add(dayRent);p7.add(tday);f.add(p7);
p8.add(rateRent);p8.add(trate);f.add(p8);
p9.add(save);f.add(p9);
p10.add(clear);f.add(p10);
p11.add(exit);f.add(p11);
/* f.add(l1);
f.add(l2);
f.add(custId);
f.add(tid);
f.add(custName);
f.add(tname);
f.add(custAdd);
f.add(tadd);
f.add(custPhone);
f.add(tphone);
f.add(dayRent);
f.add(tday);
f.add(rateRent);
f.add(trate);
f.add(save);
f.add(clear);
f.add(exit);*/
c.add(f);
save.addActionListener(this);
clear.addActionListener(this);
exit.addActionListener(this);
f.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e)
{System.exit(0);}});
public void actionPerformed(ActionEvent e){
if(e.getSource()== exit)
{System.exit(0);}
if(e.getSource()== clear){
tid.setText("");
tname.setText("");
tadd.setText("");
tphone.setText("");
tday.setText("");
trate.setText("");}
if(e.getSource()== save){
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException e1) {
JOptionPane.showMessageDialog(null,"ERROR:"+e1.getMessage());
try{
conn=DriverManager.getConnection("Jdbc:Odbc:Car Rental", "", "");
stmt=conn.createStatement();
rs=stmt.executeQuery("Select * from Customer");
while(rs.next()){
tid.setText(rs.getString(1));
tname.setText(rs.getString(2));
tadd.setText(rs.getString(3));
tphone.setText(rs.getString(4));
tday.setText(rs.getString(5));
trate.setText(rs.getString(6));}
String s=("CustID: CustName: CustAdd: CustPhone: No.of days rent: Rate per rental: \n");
while(rs.next())
s=s+rs.getString(1)+" "+rs.getString(2)+" "+rs.getString(3)+" "+rs.getString(4)+" "+rs.getString(5)+" "+rs.getString(6)+"\n";
JOptionPane.showMessageDialog(null,s);
catch(SQLException e2){
e2.printStackTrace();
public static void main(String args[]){
NewRecord nr=new NewRecord();
// nr.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}//end of newRecord class
}//ends of New rental program
I tried to use extending to JPanel or JApplet but still the same. Any help??Hi,
In the NewRecord java file, use change the
f = new JFrame();
c = f.getContentPane();, after that all panel add into the container
p1.add(l1);c.add(p1);
p2.add(l2);c.add(p2);
p3.add(custId);p3.add(tid);c.add(p3);
p4.add(custName);p4.add(tname);c.add(p4);
p5.add(custAdd);p5.add(tadd);c.add(p5);
p6.add(custPhone);p6.add(tphone);c.add(p6);
p7.add(dayRent);p7.add(tday);c.add(p7);
p8.add(rateRent);p8.add(trate);c.add(p8);
p9.add(save);c.add(p9);
p10.add(clear);c.add(p10);
p11.add(exit);c.add(p11);and finally remove this line below
//c.add(f);Try to avoid add frame into the container, or else you will receive adding a window to a container error.
Rgrds,
Sen
Message was edited by:
arjensen -
Windows 8.1 installation first reboot 0xc000007b ntoskrnl.exe missing or contains errors
I'm trying to install Windows 8.1 (with updata 1) using UEFI on my Intel DP45SG.
Starting up the installation by using UEFI works fine, but after the files have been copied and the system reboots I get the following error code: 0xc000007b ntoskrnl.exe missing or contains errors
I've tried reformatting my USB stick and recopying the files, as well as re downloading the installation files but this hasn't resolved the problem.
Is there anything I can try to fix this? Perhaps give some commands in the commands prompt?Hi Gi,
It might be caused by changes in Windows 8 PnP in which Boot Start Drivers are not installed by default.
Please try following
the instructions as mentioned in the KB aticle.
https://support.microsoft.com/en-us/kb/2751461?wa=wsignin1.0
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Attribute for user contains errors. Inform system admin
Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.Hi
<b>Which SRM version are you using ? This is an SRM error message.</b>
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
<u>Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.</u>
<b>Please go through the following links as well -></b>
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
<u>Hope this will definitely help. Do let me know.</u>
Regards
- Atul -
IDX1: Port SAPIDS, client 800, RFC destination contain error
hi
i changed the client on xi for idoc to file scenario.
in sm 58 iam getting following error
Transaction IDX1: Port SAPIDS, client 800, RFC destination contain error
regards viju........VIJENDER SRIRAMOJU,
If you change the client on xi for that scenario, make the corresponding changes
in Idx1.
Also delete the entries from Idx2. (entries in idx2 are read automatically during runtime)
There is a howto on idoc scenario in sdn. Just go through that.
reg, -
XI: idoc 2 file scenario( Contain error in SM58)
Hi experts,
Here i am having one issue. i have done Idoc 2 file scenario...i have created material in R/3 successfully. when i have sent the material to legacy system..Idoc was generated Successfully in r/3 but i haven't seen that message in SXMB_MONI..
i got the error message in SM58 i.e. IDX1 port SAPDE1, Client 220, RFc Destination Contain error.
plz any one can u help me on this....
Regards,
YadavHi Yadav,
The RFC port you defined is not correct in IDX1. The Port name must be in the form of u201CSAPxxxu201D, where xxx is the system ID of the backend SAP system.
Just cross check it.
Check this for more details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards,
Sachin -
having lots of problems with TB lately but until today it worked itself out somehow....now today I- can't open it. suddenly after being prompted to update TB I get error messages. 'program files(x86) Mozilla/Thunderbird/ icud+52.dll is either not designed to run on windows or contains error. install again or contact software vendor' then after I click that away get another one 'cannot load xpcom' . I am not very tech savvy with computers but have tried every reasonable thing I trust myself doing. I thought it might have to do with a an outdated Firefox so reinstalled that. I have searched high and low on how to uninstall TB and reinstall again WITHOUT losing any emails...,but none of the answers I found on this question are clear about this so I don't dare to do it yet. I don't have my pop address emails redirected anywhere else (not to webmail) so only access them via TB on my computer. How can I solve this without losing ALL my existing emails and email folders?
thanks in advance.Hi Chanpuff,
I have a look at my own Windows 8.1 machine, the sqmapi.dll in 'C:\Program Files
(x86)\Windows Portable Devices' is 217KB and in “C:\Program Files \Windows Portable Devices” is 272KB.
If you want to make a modification to the files, it is recommended to make a restore point and backup the important data to reduce the risk of unexpected error.
“Would it be safe to try it out? Or are there other possible solutions?”
The SqmApi.dll is a part of system ,we don`t recommend to try to repair it with a thirty party software. We cannot verify the safety of the software.
I agree with
DonPick, to ensure the safety of the whole system .It is recommended to have a full scan of the whole system.
Best regards -
Document Contains Errors - Approval not possible
Hi,
We are having issue in our Invoice Workflow.
When ever the approver is trying to approve the document, he is getting the error message "Document Contains Errors -> Approval not possible".
We have verified the document and check for error messages and found the below error messages on the Document.
E BBP_PD 047 Posting period 006 2011 is not open.
The document was submitted some time in the first week of December and as part of AP process the posting period will be closed during the first week of every month. This is a common business case and why is it stopping from posting the doc?
FYI..this Invoice is posted against the WBS element.
Pls give some insight on this and how to address the issue.
Regards,
SatyaHi,
The posting date in the invoice is referring to the past period which is closed.You will have to change the invoice posting date to current period date and then process.
Regards,
Sanjeev -
Error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors
I have a new 2 month old(Aug 2014) hp eliteone 800 all in one computer running win 8.1 64bit. i have two 1 tb hard drives raid configuration. left computer on for an afternoon and when I came back it was off mysteriously. tried to turn on and it
attempted to repair and was never able to repair. hp sent a new windows 8 software to install, they said os was corrupt. installed three times now i get error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors. hp said installation
disc probably corrupt and sent me another. installed twice with same result, error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors. This began after the computer was just one month old and after i had placed 300-400
gb of my personal data from other computers on it. I need all of these files so can't just recover/delete all of the files on the computer, although i have read that that may be my only solution? If i do recover will the files still be on the second hard drive??
can you help with this problem?? thanks.Hi Richard,
Did you try to repair or reinstall the system when you insert the new media?
Have you tried to carry out a system recovery, which will restore your system back to factory defaults and how was the result?
In addition, I suggest you use the new installation media to do a clean install(full format the old system).
How to perform a clean installation of Windows
http://windows.microsoft.com/en-IN/windows-8/clean-install
Note: If you have important personal data, remember to insert your drive into another computer to backup your personal data before you do any operation.
Karen Hu
TechNet Community Support -
Mapping of element contains errors
Hi experts,
I was doing a complex mapping for creating a Sales Order (Items, ItemsX, ...)
Everything worked fine, I added 2 simple Types to the Data Type xsd file, redeployed and still worked.
Now all of a sudden I can't seem to map anymore, with a problem: "Mapping of element x contains errors".
When I start mapping, either I get an exception (and NullPointerExceptions) that he can't find the root element of my context anymore. Or I just save, and all my mappings dissapear and I get a screen like the screenshot bellow, with broken mappings.
All the failed mappings get the value "TaskOutput".
Another detail is, that when I delete all those broken mappings with the value "TaskOutput".. close and save, the broken mappings appear again.
Tried solving with: creating new .xsd file (same data), created new process, new UI component.
Screenshot of problem
http://i53.tinypic.com/2ykfh3r.png
Screenshot of illegalstate exception (I also get nullPointer sometimes)
http://i56.tinypic.com/1zl68m1.pngjust delete old mapping
-
Solaris Container Manager console does not work
I've loaded SMC 3.6 and loaded the container manager piece with no problems on a fresh Solaris 10 (11/06) install on a blade 1000. The managment center works just fine. I've loaded the container manager according to the following doc:
http://docs.sun.com/app/docs/doc/819-4098/6n699bc48?a=view
The install went fine but when I point my browser to the page specified in the doc above the browser wants to download a bin file. I've restarted the java web server as shown in the above doc and I've scanned the port 6789 with nmap to make sure it was open. All browsers I've tried want to download a bin file. They are not launching a console as shown in the doc.
I've tried firefox on linux, netscape on solaris and IE on windows. Java is loaded and working on all platforms. How do I get this working?use secure http
https://<server name>:6789
make sure you ran the setup for Solaris Container Manager
Maybe you are looking for
-
Single User Mode: Still waiting for root device
iMac G4. I reset the NVRAM, PRAM. It won't attempt to boot from anything but a OS 10.4 cd; booting from OS 9 cd just leaves me at the flashing question mark icon. If I try to boot from OS X cd, it comes back with the prohibitory sign. If I try to boo
-
How to concatenate a string with single quotes
Hi all, how to concatenate a string with single quotes to a variable. Sathya
-
How do I save my itunes music/ library to a flash stick?
I want to put all my itunes music onto a flash stick to play in my car. Do I just pluf flash stick into usb slot on Mac and transver? Sorry not too good at this!!!!
-
Outputting currency in external format???
I am doing project for an external client. (China). I was outputting some currency values in report. I a mworking from india. Now i am getting warning that i should output currency in external format?? What does that mean??? Rakesh
-
i cant export the window moves itself and wont resize. what do i do?