Solaris 8 DCA Download Won't Fit on Floppy

Holy Schmokes Gus, here's my prob. I downloaded
the Solaris 8 Device Configuration Assistant file
to drop on a floppy, but the file is like 19k too big.
My floppy has a formatted size of 1,457,664 bytes, but
the file size is 1,474,560.
Has anyone else had this problem, or even better, does
anyone have an idea for a solution? I'm running
NT, but I'm assuming that has nothing to do with
the available disk space on a standard floppy.
Thanks for any advice!

Yes, it's a floppy <b>image</b> including boot sector, fat, directory
information, etc...
Do <b>not</b> write it as a file onto an empty MSDOS diskette. That
does not work (and it doesn't fit on the floppy :-)

Similar Messages

  • TS1702 any app I download from the app store doesn't open. after I finished downloading the app I tap it to open but it crashes as soon as i finish downloading it. yes, the downloading process works but any app I download won't launch. pls help

    any app I download from the app store doesn't open. after I finished downloading the app I tap it to open but it crashes as soon as i finish downloading it. yes, the downloading process works but any app I download won't launch. pls help

    Hi,
    Install the v10.6.6 combo update available here. It's ok to do this even though you are already running v10.6.6. The combo includes fixes that were not included in the original update.
    http://support.apple.com/kb/DL1349
    Restart your Mac and try the MAS again.
    You can download apps directly from the MAS once you have it running.
    Considering the TM backup took so long, make sure there's enough space on your Mac startup disk.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 15% free disk space.*
    Carolyn

  • I have an iPhone5 16 gb and a 120 gb iPod. All my songs won't fit on the iPhone of course. How can I just get some of them on the iPhone? I want to keep all my music on the iPod. I am VERY new to all this so be gentle and thanks.

    I have an iPhone5, 16 gb and a 120 gb iPod. All my songs won't fit on the iPhone of course. How can I just get some of them on the iPhone? I want to keep all my music on the iPod, but just want SOME of my music on the iphone. I am VERY new to all this so be gentle and thanks.

    You Sync the Music you want on the Phone via iTunes on your computer.
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

    I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work.  The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything.  What I copied was the entire iTunes Media folder.  So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air?  Whew!

    iTunes- How to move the library to an EHD
    After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

  • I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external?

    I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?

    Good luck and you are welcome.
    Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
    This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/

  • Pc card won't fit

    I backed up all my stuff from my old hp computer to a Toshiba 5-GB PC Card drive. I transferred most of it to my new Satellite L305 through a USB cable (I think; Properties doesn't work) but one thing doesn't work and now I find the card won't fit. It goes part way into the PC Card slot but it won't go all the way in. I tried both ways, a reasonable amount of force, ejector button in or out; it simply will not go in. Computer (from Start) won't recognize it. I'm afraid to really jam the thing in. Why won't it fit???
    Roger AC Williams

    That system has an ExpressCard/34 and ExpressCard/54 slot.  I may be wrong, but I don't believe it will accomodate a PC Card. 
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Firewire connector from Digi-02 won't fit into my new iMac firewire slot.

    I'm using my new I-mac with a Digi002 interface,but the cable end
    which is firewire won't fit into the I-mac firewire slot.

    Do you have the Thunderbolt to FW cable?
    Likely you need a 9-pin to 6-pin cable...
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Category&Ns=P_Popularity|1&Ne=5000&N=7160&Ntt=firewire+1394+cables

  • One hour 25 minutes won't fit on a single layer

    Hey People,
    Using Toast 7, I get the error that 1:25 min. won't fit on a single layer Verbatim. ???
    It is an export from FCE with lots of editing if that makes a difference.
    iDVD is not much use; it spits out blank disks during multiplexing stage but pretends to keep burning,
    a common problem I know but I have never been able to fix it.
    Thanks for any insight,
    Al

    Hi
    This is my notes on first part - From FC to iDVD (or Toast™)
    FCE/P to iDVD
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    How to go from FCE/P to iDVD I do
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
    • Export out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not as Self-Contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    This QT.mov file I import into iDVD from within iDVD.
    Free space on Start-up hard disk
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    Brand and type of DVDs used
    • I use Verbatim
    • I use DVD-R
    Burn speed set
    • I set down this to x4 (or x1)
    iDVD BUG
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    Use of Chapters
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    Material used to build movie
    • video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref. file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
    Yours Bengt W

  • Video won't fit perfectly on screen?

    http://uploadimage.tk/?v=screenipi.gif
    Why does it do that?
    (The September Random Music Mix image won't fit perfectly.)

    What are the EXACT video settings, and what project preset are you using?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

  • Burn won't fit - is it minutes or MB's?

    I'm getting the message that my songs won't fit on one CD. There are 55 songs (actually spoken word) 1.5 hours, 482 MB. The CD is 80 min, 700 MB. Is it the minutes or the MB that is important? 482 MB should fit easily.
    Dell Precision 340   Windows XP Pro   iTunes 7.0.0.70

    Its where your burning an audio CD.
    All your songs/books are in either MP3 or AAC both being compressed formats. When a program gets ready to burn an audio CD, it has to uncompress the song(s) and burn them in a uncompressed format so a regular CD player can read it.
    So the 400 and something MB COMPRESSED files when uncompressed are MUCH larger. If you look at the blank CD or the case it came in, it will tell you how many minutes of music it can hold on average. I THINK most 700MB CDs hold 80min worth of audio

  • At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none  lightening fitting that I want.

    At the moment I have a long Griffin charging cable. Unfortunately now that I have the Smart Case this won't fit through the available hole. Is there any other make that will fit that has the none  lightening fitting that I want.

    I wonder if this comment on the Amazon site is the answer to my problems?
    PLEASE NOTE: In order to provide the same power output as an original 3 ft Apple USB cable, the housing of our 6.5 ft cables need to be a bit larger. Due to the larger head size, it will not be compatible with some cases that have a smaller charger opening
    If that is the case then I am stuck with the Griffin one or just use the original.
    Thanks for your observations guys

  • I just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?

    i just bought a macbook pro and the mountain lion free update applied correctly but the internet went down and now the download won't appear/ continue, and when i open the app store it requests me to pay for the update? what can i do?

    Welcome to Apple Communities
    http://www.apple.com/support/mac/app-store/contact

  • WD My Book 1 TB External Hard drive firewire cable won't fit into Mac Pro

    Hi the firewire cable that came with my Western Digital My book External Hard Drive won't fit into my Quad Core Mac Pro. Is it the wrong cable? What's the correct cable that would connect my Western Digital External Hard Drive into my Quad Core Mac Pro? Any help is greatly appreciated

    If you have a port that looks like this one, it's FW400. If it looks like this one it's FW800. If you have one of each it supports both. If you don't have either then it's USB only.

  • HT4623 Hi. My device won't update iOS in settings. It won't download apps for me. Itis connected to the internet). The latest app I tried to download appears stuck! Has not completed its  download, won't open and I cannot delete it. What can I do?

    Hi. My device won't update iOS in settings. It won't download any new apps for me. (It is connected to the internet). The latest app I tried to download appears stuck! Has not completed its  download, won't open and I cannot delete it. What can I do? I purchased the product online a year ago. I'm not sure of the exact date... I think it was late November 2012.
    Any help appreciated.
    Fileas

    If this has happened more than once the problem is likely on your PC.
    See here: http://www.apple.com/support/iphone/assistant/itunes/

  • Can't find adobe reader on computer - download won't work - says already downloaded

    can't find adobe reader on computer - download won't work - it says it's already downloaded!

    What is your operating system?  You write "downloaded", but did you also install it?

Maybe you are looking for

  • Making a backup of my Time Capsule

    Bonjour, Sorry if this has already been asked; I could not find what I was looking for. I have a Time Capsule (500 GB) which connects to a MacBook Pro, an XP desktop and a Vista laptop. I make backups of my PCs each week (ish) and store them on an ex

  • Editing with photoshop gives duplicate images

    Prior to going to Lion and iLife 11, when I edited photos with Photoshop that were in iPhoto, the edited images was all that was visible in the iPhoto window, but could revert to the original image that was filed "invisibily" in background if necessa

  • Moving clips to the timeline

    I have a partially edited video in the timeline. I also have a lot of clips still sitting on the clip pane (or whatever it's called). Is there a way to transfer, say, next 34 clips to the timeline all at once, in order? I really don't feel like dragg

  • I want to remove my email password from the firefox memory

    I chose to have firefox remember my email password. I want to change that back so that a user has to enter the password to access my email.

  • ItemListBox behaviour not consistent

    Hi All, We have ItemListBox(multi select), I/p field, button, button as part of UI screen. When user uses keyboard a) for selection of item in itemlistbox and b) uses keyboard for going to next field (i.e. in our case I/p field), selection can be tra