Solaris 8 does not recognise second CPU

Hi,
my Solaris 8 installation on my E250 does not recognise my second CPU. prtdiag and psrinfo only show one CPU. OBP reports the second has no problem and is online (ASR). It even has the same temperature as the other operating one...
Can someone help me?
Thanks in advance to all,
Horst

# eeprom
check the .upa-noprobe-mask variable. It has to be 0 to see all cpu's
depending on OBP revision, it may be called upa-noprobe-list
# eeprom .upa-noprobe-mask=0
# init 6 (to reboot)

Similar Messages

Solaris does not see second cpu

I have put together the following system:
Asus A7M266-D mobo
2 - Athlon MP 1.6+ cpus
2 - 512 MB DDR PC2100
Maxtor 60 gb hd
Matrox G450 agp video
mpstat shows only cpu 0. Any thoughts on how to get both cpus running?
Allen

Allen,
What does the following command indicate:
psrinfo -v.
Do a man page on mpstat and I think you'll find out that this display shows cpu sets! In a multiple cpu machine, CPU's can be grouped into "sets". Unless there is a defination to group otherwise, a dual processor machine will indicate only one "set".
John

Leopard does not recognise second scanner

I have 2 scanners connected to my Mac Mini, an Epson V700 and an Epson CX3650.
Under OSX 10.4 when starting Epson Scan I was presented a list of scanners where I could chose from and both scanners could be operated.
After upgrading to Leopard and installing the new drivers from Epson, Leopard only recognises the Epson V700. The CX3605 is an All-in-one and the printer works fine under Leopard.
If I only install Epson scan for the CX3650 it works fine.
How can I get both scanners recognised by Leopard?

Have you checked Epson's website for new drivers?
I had to reinstall the drivers for my Canon scanner for it to work properly.

Please help. ive bought a second hand ipod nano, when i connect it to my pc it recognises it as a sigma mass usb device, yet its a 8gb ipod nano,and i tunes does not recognise it, im running on windows vista basic yet my own 80g classic ipod runs perfect

please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.

there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit.

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

My i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update

my i pad shows connect to itunes but my computer does not recognise the devise -- it was ok until i tried to do a software update

Try and force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

MDS9148 does not Recognise 6248 FI

Hi there
I cannot get an MDS 9148 to recognise and push zoning to a 6248 FI.
I have an MDS9148 (6.2.3) connected to a 6248 FI (2.1.2a). I am using DCNM 6.2.3. I only have the base port license on the MDS, and the free version of DCNM. My reading of the documentation suggests that with that suite of product I should be able to see and manage the 2 SAN elements of the MDS and FI (zoning etc etc) from the DCNM.
I have configured the FI in Switch mode, I want the MDS to do the zoning for both devices.
I have link up on the ports between the FI and the MDS. There are 2 ports, configured as a port channel.
I have an EMC SAN connected to the FI. It is visible to the MDS.
I have an operational blade in the chassis. The MDS can see that too.
So the DCNM shows the whole network, but does not recognise the FI as a 6248, and so it will not allow me to configure and manage my zones across the 6248 either.
I have attached showing the view of the network from fabric A and Fabric B sides.
Any thoughts would be appreciated
Anthony

calopez2
Thanks for that tip. I had an SNMP user "dcnmuser", in the UCS, but not a local admin user. Once I did that I was able to discover the Fabric and have the ability to pick the Fabric or the MDS ports for zoning purposes. That is certainly an advance!
I seem to be 2 steps forward and 1 step back though. I have 2 other issues.
1. when I edit the zone and add some of the SAN ports into the zone, I can select either the fabric or the MDS SAN Switch A, connected to Fabric A (so far so good), I can select the ports I want (I will use WWNN later, but for now I am using port zoning), but when I apply I get an error
"SNMP: zoneMemberRowStatus.10.1.1.3:Permission denied or feature disabled- MP001-SANSW01 zoneMemberRowStatus.10.1.1.3 Failed to add 1 members out of 1"
2. I have 2 FIs and 2 MDSs. I cannot see the same thing on fabric B (MDS and FI) as I see on fabric A. I have reviewed the configs on the 2 MDS units. They appear to be identical. However, if I do a Discover on the second MDS, it takes a very long time, and if I try to discover the B FI, on its specific address, it is successfully discovered, but then a
"192.168.25.86 has already been discovered as Fabric_MP001-SANSW02. The original SNMP credential will be used and the version checking is skipped"
If I look at License Assignments i see 4 switches, the 2 MDS 9148s and the A 6248 with correct model numbers, and the B 6248 "Switch model unknown". For some reason the B fabric is behaving differently from the A fabric. I expected that I would be able to do the same thing on both sides.
Anthony

After having updated the software on my apple tv, i cannot set up home sharing on it (let alone itunes!) simply, the apple tv does not recognise my apple id and password anymore

i have updated the apple tv software (on one apple tv, ihave 2) after having used for 2 years withou any problem.
i tried to log in again to watch movies already purchased but i cannot. the itunes store is not available and the home sharing does not recognise my id and password. on my pc i have alsoupdate to the latest software my itunes.
the second apple tv where i am still resisting tomupdate the software works very well as always.
help!?

Hi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore

Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.

Apple tv does not recognise movies in itunes library

Homesharing works. My issue is that apple tv does not recognise all movies in my library, particularly reference movies (created them through quicktime pro to overcome itunes not playing AVI issue). Can anybody help?

They may not be compatible.
Supported formats
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Time machine does not recognise new imac

I backed up a new imac using time machine and a 1TB time capsule.
The imac died, and I have a second brand new imac.
Using the migration assistant/restore from time machine, I was able to restore my old system - note when this was completed, after 3 days, I had to create a new user, then go back and switch to the user that I recovered.
Now when I try to set up time machine, it does not recognise the current system, and wants to create a brand new back up of the entire system. I do not have enough room on my time capsule to do this, plus I don't want to lose my previous back ups.
I am currently using the computer as recovered from time machine, so don't understand why it wants to start from scratch and what I can do.
Any help would be greatly appreciated.

I have part of the answer, but cannot -at least yet - find the rest of the answer in older discussions.
The name of you backup file is YourMachineName_YourMACaddress.sparsebundle. Time Machine is using the MAC address of your (1st) network adapter as a unique identifier. Your new machine has a new MAC address so Time Machine thinks it's a different machine. Which it is in one sort of way, but you want to treat it as the same machine and continue backups.
It's not as simple as renaming the sparse bundle changing the MAC address part of the name to the new MAC address.
If you look the contents of the TC disk you see a "hidden" file named '.YourMacAddress' which contains 16 bytes of data - some kind of token?
I know there was a discussion of this - in these forums I believe - and possible practical information on how to change things so they'd work like you wish, but so far I can't find it.
Note: YourMACaddress and YourNewMacAddress are the 12 hex digits of your machines MAC addresses in ASCII.

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

HT1414 I was in the middle of updating my iphone 4s to iOS7, then it crashed, I am able to get the apple simple when trying to restart, then it shows the cord and itunes logo and then switches off again. Itunes on computer does not recognise the phone

I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???

Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success.

My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

Hi Mick2291,
Thanks for visiting Apple Support Communities.
I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
Apple TV (2nd and 3rd generation): How to restart your Apple TV
http://support.apple.com/kb/HT3180
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Best Regards,
Jeremy

Solaris 8 does not recognise second CPU

Similar Messages

Maybe you are looking for