Solaris 8 IA "Device busy too long"

The installation of Solaris 8/IA proceeds completely fine. However, when the system is to boot on it's own as the last step, I get the following error: "device busy too long." I've tried many different configurations for the SCSI card and I have followed the "device configuration guide." What could be causing this? It seems as though Solaris is completely happy with the hard drive and CD ROM during installation. Why are things different during runtime?
I am using an Adaptec 2940AU SCSI card with a SCSI hard drive and with a SCSI CD ROM.
Thanks in advance.

Thanks for responding to my message concerning the "device busy too long."
Before configuring the system I purchased components that were supported in the hardware compatibility list. Most importantly, the motherboard is an ASUS P3B-F and the SCSI card is an Adaptec AHA-2940AU. I read and followed the advice in the Solaris 8 Configuration Guide, the Adaptec literature, and the specs for the SCSI hard drive. I think I've tried every combination available.
As a check I installed Windows 2000 on the system to make sure that there was fundamental compatibility. The OS installed without any problems the first time!! The system booted and operated completely stable. So I must assume that the components basically work together.
I would like to know what Solaris is checking to arrive at a "device busy too long" state. If I knew this, perhaps I can solve the problem.
Thanks again!! This sure is frustrating.

Similar Messages

New SCSI hard drive problem: Device busy too long

I set up second SCSI hard drive for my sun box Sparc Station 20. The set up is as follows:
New SCSI hard drive (ID #2) connects to Sun box and connects to tape drive (SCSI #4) with terminator.
Hard drive is Seagate model ST15150N with J01 (open : means disable drive terminator) and J04 (jumper on second position, ID=2).
I CAN format the hard drive and assign label etc.. but when I type the command : > newfs /dev/rdsk/c1t2d0s7 (I use whole slice 7 as one partition and c1 is my second controller).
The following error displays continuously:
WARNING: /iomnn@f,e0000000/sbus@f,e0001000/dma@1,81000/esp@1,80000/sd@2,0 device busy too long
Is this error come from the wrong hardware set up or from other reason ? Any suggestion is welcome . Thanks in advance.
William

First of all, thanks for your reply. I appreciate it.
A couple of things. I check my system profiler and I couldn't find out what kind of SCSI card I have. I even opened up my machine and there wasn't any writing on it. So how do I find out what type of card I have? My other question is if the same card worked for the SCSI drive I had before, why won't it work on the new drive. I've set it as the master at the end of the SCSI cord and like I said I used CCC. The drive shows up on my desktop but won't boot. Should I try loading OS from disks instead of using CCC?

Business Rules Project Takes Too Long to Open

Does anyone know why it takes too long (~3-5 minutes) to open/edit a security project definded for assigning business rules to planning application forms? We are using Hyperion v11.1.1.3.0. Essbase is on Windows server, Shared Services on Solaris 10 Unix. Even before we migrated Essbase to Windows to gain better performance running calcs, opening projects using EAS has always been very slow to open. Please advice if there is a way to improve performance on this.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Firefox takes a long time to start up
* https://support.mozilla.com/en-US/kb/firefox-takes-long-time-start-up
Check and tell if its working.

HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it....

HT1349 i have problem with my iphone4s in the icloud ; when i wont too make a ID apple free dis messege apear: Accont Limit Reached This device is no longer eligible for creating a free icloud acoont.What i cant 2 doo???.

i have problem with my iphone4s in the icloud ; when i wont too make a ID apple free dis messege apear: Accont Limit Reached This device is no longer eligible for creating a free icloud acoont.What i cant 2 doo???.

were i have too pay for additional storage?

Takes too long to hibernate when I close the lid - Also random device noise when it boots up

Hello guys.
Ever since i've wiped the machine, i've been having these two problems. When I close the lid, it used to go to sleep straight away, but now I can see the sleep light (and the power button) flash and flash, then it goes to sleep.
When waking up it goes through the lenovo startup screen and resuming windows, then it asks for a password, before I used to open the lid and it would ask me for the password straight away. I know it was going to sleep because I could hear the beep straight away when I closed and opened it, but now it just takes too long.
Also, everytime I boot up into windows or resume into windows from a sleep state, I can hear the device noise, like something is being plugged in/out. But there is nothing being plugged in or out at the time. I can't get to device manager quick enough to see what it is that is causing it.
But all drivers seem okay.
Thanks in advance.
Sam.
EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (hear the beep) an then turns back off again.
Weird.
T420 model number: 4180-PR1 with OS: Windows 7 Pro 64 bit
T420 4180-PR1 - OS: Windows 7 Pro 64 bit
Solved!
Go to Solution.

Hi Sam,
is this to do with the T420 model number: 4180-PR1 with OS: Windows 7 64 bit installed on it as in another thread you posted in?
Maybe you could pop the information into your signature; members like to know which system and OS are involved. At the top next to Sign Out choose My Settings > Personal Profile > Personal Information - Signature
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Taking too long to load

I just got a refurbished iPod 4g. When I try to connect to iCloud, it says it 'cannot connect to server' and when I try to access iMessage it tries to load the country/region I am in... for a very very long time. I have not been able to get any further in these programs that the 'loading' or 'cannot connect' screen.
Any way to fix these loading problems, or do I just have to wait it out?
Thanks so much!

Hi Pandiarajan,
well I doubt you are able to speed it up (aside from taking a faster computer ).
And you didn't say what exactly is "too long" !?
This message only shows the last loaded item.
Maybe LabView is busy with initializations like checking 'VISA resource names'. This may take a while (especially when scanning GPIB or other communication buses for devices) and you just have to wait for finishing this step...
Message Edited by GerdW on 07-20-2007 10:43 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

TS3772 I made a 3 minute movie with my iphone 4s. when I attempt to share it by message or email, a message says the movie is too long and that I must make clips. Is there any way to get around this and send the whole video? I think everything is in the c

I made a 3-minute movie with my iphone 4S. When I attempt to share it via email or message I get a message that says it is too long, that I should try to make a clip. Of course I had rather send the whole thing. What are the possibilities? I think my music and likely my videos and pictures are in the cloud.

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

AirPlay Screen Mirroring (Mavericks) disconnects frequently with "Feedback taking too long to send" message

My company has several TVs with AppleTVs (3rd generation units) connected in our conference rooms so we can "Screen Mirror" our Mac laptops via AirPlay during meetings. Many employees have complained that AirPlay Screen Mirroring drops frequently during meetings for no apparent reason.
In attempts to determine the cause of the issue, I removed the AppleTV units from Wi-Fi and hard-wired them all to the LAN (100Mbps/Full duplex, no switchport errors seen on the Cisco switch). I upgraded the AppleTVs to the latest firmware. I had our AppleTV users ensure they were running MacOS Mavericks with the latest software updates installed. I had the Mac laptops hard-wired into the LAN during meetings in the conference rooms. None of these changes resolved the AirPlay issue.
I reviewed the MacOS "/var/log/system.log" file from the laptops of several users that reported issues. I found a pattern that seemed to indicate that the "coreaudiod" process reported "Feedback taking too long to send" several times before the AppleTV connection was terminated. Also, from a network trace (using "tcpdump") taken during an unexpected AirPlay Screen Mirroring disconnection, I could see that the Mac laptop sent a TCP FIN packet to the AppleTV unit (this would indicate that the MacOS laptop initiated the closing of the AirPlay connection).
I have included the relevant log file entries below. Please note that the LAN internal to our company is "solid" and there have been no connectivity issues detected or reported during the times the AirPlay sessions were disconnected.
I believe I have found a workaround to this issue. By going into "System Preferences", "Sound" and then changing the "Output" device BACK to the "Internal Speakers" (rather than the AirPlay destination), the AirPlay Screen Monitoring connection seems to remain stable.
My questions are:
- is anyone else experiencing this type of problem? any other solutions recommended?
- is there a way to change the AirPlay defaults so that Screen Mirroring only sends the video (not audio)?
- does anyone know what the log file entries indicate (like, what does "Feedback taking too long to send...." mean)?
- any fix planned for this issue?
From: "/var/log/system.log":
Jan 16 10:50:16 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:16.454404 AM [AirPlay] ### Feedback taking too long to send (1 seconds, 1 total)
Jan 16 10:50:18 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:18.524517 AM [AirPlay] ### Feedback taking too long to send (4 seconds, 2 total)
Jan 16 10:50:20 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:20.533639 AM [AirPlay] ### Feedback taking too long to send (6 seconds, 3 total)
Jan 16 10:50:22 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:22.548168 AM [AirPlay] ### Feedback taking too long to send (8 seconds, 4 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554522 AM [AirPlay] ### Feedback taking too long to send (10 seconds, 5 total)
Jan 16 10:50:24 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:24.554809 AM [AirPlay] ### Report network status (3, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:26 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:26.545531 AM [AirPlay] ### Feedback taking too long to send (12 seconds, 6 total)
Jan 16 10:50:28 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:28.559050 AM [AirPlay] ### Feedback taking too long to send (14 seconds, 7 total)
Jan 16 10:50:30 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:30.628868 AM [AirPlay] ### Feedback taking too long to send (16 seconds, 8 total)
Jan 16 10:50:32 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:32.655638 AM [AirPlay] ### Feedback taking too long to send (18 seconds, 9 total)
Jan 16 10:50:34 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:34.641952 AM [AirPlay] ### Feedback taking too long to send (20 seconds, 10 total)
Jan 16 10:50:36 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:36.659854 AM [AirPlay] ### Feedback taking too long to send (22 seconds, 11 total)
Jan 16 10:50:38 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:38.653594 AM [AirPlay] ### Feedback taking too long to send (24 seconds, 12 total)
Jan 16 10:50:40 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:40.659279 AM [AirPlay] ### Feedback taking too long to send (26 seconds, 13 total)
Jan 16 10:50:42 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:42.745549 AM [AirPlay] ### Feedback taking too long to send (28 seconds, 14 total)
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.532853 AM [AirPlay] ### Endpoint "AppleTV" feedback error: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533151 AM [AirPlay] ### Feedback failed: -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533273 AM [AirPlay] ### Error with endpoint "AppleTV": -6722/0xFFFFE5BE kTimeoutErr
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533427 AM [BonjourBrowser] Reconfirming PTR for AppleTV._airplay._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533588 AM [BonjourBrowser] Reconfirming PTR for 9C207BBD8EA1@AppleTV._raop._tcp.local. on en0
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.533839 AM [AirPlay] ### AirPlay report: Network dead for 10+ seconds after 159 seconds, screen, nm "AppleTV", tp WiFi, md AppleTV3,1, sv 190.9, rt 0, fu 0, rssi -54
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534104 AM [AirPlay] ### Report network status (5, en0) failed: 1/0x1 kCFHostErrorHostNotFound / kCFStreamErrorSOCKSSubDomainVersionCode / kCFStreamErrorSOCKS5BadResponseAddr / kCFStreamErrorDomainPOSIX / evtNotEnb / siInitSDTblErr / kUSBPending / dsBusError / kStatusIsError / kOTSerialSwOverRunErr / cdevResErr / EPERM
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.534315 AM [AirPlay] Deactivating virtual display stream for quiesce
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543682 AM [AirPlayScreenClient] Stopping session
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543815 AM [AirPlay] Quiescing endpoint 'AppleTV'
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.543907 AM [AirPlayScreenClient] Stopping session internal
Jan 16 10:50:44 My-MacBook-Pro.local coreaudiod[161]: 2014-01-16 10:50:44.544218 AM [AirPlayScreenClient] Stopped session internal
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.544266 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.544297 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.553084 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.554904 AM [AirPlayAVSys] ### Quiesce AirPlay
Jan 16 10:50:44 My-MacBook-Pro.local SystemUIServer[159]: 2014-01-16 10:50:44.557604 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local AirPlayUIAgent[985]: 2014-01-16 10:50:44.560307 AM [AirPlayAVSys] Ignoring route away when AirPlay not current
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: Display 0x04280880: GL mask 0x21; bounds (0, 0)[1920 x 1080], 62 modes available
Jan 16 10:50:44 My-MacBook-Pro.local WindowServer[89]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000001f, accelerator 0x00004ccb, unit 0, caps QEX|MIPMAP, vram 2048 MB
I am happy to provide more information if needed.
Thank you.
-Tim

I'm currently still experiencing this as well. I've confirmed it occurs on 10.9.1, 10.9.2, and 10.9.3 on MacBook Pro Retina's, Mid-2012 and 2013 MacBooks. It happens on multiple ATV's not just one, all are updated to 6.1.1 and a simple reboot seems to fix it temporarily but it does come back. All the ATV's are connecting to the network via Wireless not Ethernet. These are 3rd Gen ATV's but I checked the serial number and these do not match the bad batch of Apple TV's from 2013 that were offered up for Replacement for Apple due to the bad firmware update. None of the computers have the Firewall turned on. Here's the two logs that we always find after the issue occurs (logs are recent, happened this morning):
5/30/14 8:57:36.017 AM coreaudiod[183]: 2014-05-30 08:57:36.016946 AM [AirPlay] ### Feedback taking too long to send (30 seconds, 17 total)
5/30/14 8:57:36.332 AM coreaudiod[183]: 2014-05-30 08:57:36.331492 AM [AirPlay] ### Feedback failed: -6723/0xFFFFE5BD kCanceledErr
The user will get disconnected from Airplay anywhere between 30 seconds to 3 minutes after logging on and can reconnect but then once again get disconnected after the same time period. One interesting thing to note is that when the Feedback Taking Too Long to send error starts occuring and the countdown to disconnect start ticking down to 30, its solely referring to Audio not being sent over the network and Video is working just fine. If I try to play sound I get another log and the sound doesn't play through the speakers. After a reboot, sound works fine and the Feedback Error's do not show up. I've also tried switching to Internal Speakers (since it defaultly switches to Airplay Speakers) after connecting to Airplay and seeing the Feedback timer start in the Console Logs but even after that the log continues to saw its taking too long to send and disconnects in 30 seconds.
This issue has been ongoing for months, I've got a ticket logged as far back as January with this occuring but its infrequent enough that we've just restarted and moved on. I'd say its an issue that occurs to about 5%-10% of meetings but that's an entire meeting that doesn't have the ability to Airplay until someone comes down and reboots it.
I don't often post in this forum but its still an active issue with no resolution, proof that its occuring on other people's systems, and no firmware updates having been released to correct it. It'd be nice to know of any workarounds other than having to buy some lamp timers for each conference room just to get a functional ATV or putting up a sign that says hey if you get disconnected every 3 minutes, reboot the ATV. The whole reason we're using Apple products is for ease of use otherwise I'd put together a much cheaper solution myself. Any help or recommended troubleshooting steps would be fantastic at this point.

SP2-0027: Input is too long -error on pl/sql procedure

Hi,
We are on Oracle 11.2.0.2 on Solaris 10. I have a procedure call that errors out with this error:
SP2-0027: Input is too long (> 2499 characters) - line ignored
It is one single procedure but it takes too many long inputs in it. This giant procedure call -with some names changed - is as below - is there a way I can avoid this errro? I will be thankful for inputs on it.
SQL> exec func_j23k_TYPE_ADD( 'coR-EXECUTION-SUCCEEDED-XLS-PDF-HTM-TXT-CSV-XML-FLF','co Reporting','NOT',func_j23k_TYPE_ACTION_ARRAY(func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Find in Report List'),LANG_TEXT_TYPE('en_CA', 'Find in Report List'),LANG_TEXT_TYPE('fr_CA', 'Chercher dans la liste des rapports'),LANG_TEXT_TYPE('es_US', 'Buscar en lista de informes')),'/Reporting/el/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open using Excel'),LANG_TEXT_TYPE('en_CA', 'Open using Excel'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format Excel'),LANG_TEXT_TYPE('es_US', 'Abrir usando Excel')),'/Reporting/el/xls/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in PDF'),LANG_TEXT_TYPE('en_CA', 'Open in PDF'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format PDF'),LANG_TEXT_TYPE('es_US', 'Abrir en PDF')),'/Reporting/el/pdf/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in HTML'),LANG_TEXT_TYPE('en_CA', 'Open in HTML'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format HTML'),LANG_TEXT_TYPE('es_US', 'Abrir en HTML')),'/Reporting/el/html/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in TXT'),LANG_TEXT_TYPE('en_CA', 'Open in TXT'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format TXT'),LANG_TEXT_TYPE('es_US', 'Abrir en TXT')),'/Reporting/el/txt/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in CSV'),LANG_TEXT_TYPE('en_CA', 'Open in CSV'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format CSV'),LANG_TEXT_TYPE('es_US', 'Abrir en CSV')),'/Reporting/el/csv/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Open in XML'),LANG_TEXT_TYPE('en_CA', 'Open in XML'),LANG_TEXT_TYPE('fr_CA', 'Ouvrir au format XML'),LANG_TEXT_TYPE('es_US', 'Abrir en XML')),'/Reporting/el/xml/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL),func_j23k_TYPE_ACTION_TYPE(LANG_TEXT_ARRAY(LANG_TEXT_TYPE('en_US', 'Download Data Extract File'),LANG_TEXT_TYPE('en_CA', 'Download Data Extract File'),LANG_TEXT_TYPE('fr_CA', 'TÃ©lÃ©charger le fichier d''extraction de donnÃ©es'),LANG_TEXT_TYPE('es_US', 'Descargar archivo de extracciÃ³n de datos')),'/Reporting/el/flf/',1,func_TYPE_ACTION_STATUS_ARRAY(),func_TYPE_ACTION_SCREEN_ARRAY(),'NWR',NULL, NULL)), 'MC');
SP2-0027: Input is too long (> 2499 characters) - line ignoredThanks,
OrauserN

It is an sqlplus error..
Did you try this?
begin
func_j23k_TYPE_ADD( 'coR-EXECUTION-SUCCEEDED-XLS-PDF-HTM-TXT-CSV-XML-FLF',
'co Reporting',
'NOT',
end;http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4789399600346029472

How to handle the SQL Error: ORA-01704: string literal too long

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta name="generator" content="HTML Tidy for Java (vers. 26 Sep 2004), see www.w3.org">
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta content="MSHTML 6.00.2900.2963" name="GENERATOR">
</head>
<body class="BodyContent">
HI please chek the query getting error like string literal too long update PRVDR_ENRLMNT_AGREEMENT B set b.terms=q'#
<div class="widget-title">
<h5>Medical Assistance Provider Enrollment & Trading Partner Agreement - Conditions:</h5>
<a href="# class="btn-minimize pull-right"></a></div>
<div class="widget-content">
<table width="100%" border="0">
<tbody>
<tr valign="center">
<td class="Label" align="left" width="14%" colspan="2" height="32">In applying for enrollment as a provider or trading partner in the Medical Assistance Program (and programs for which the Michigan Department of Community Health (MDCH) is the fiscal intermediary), I represent and certify as follows:</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">1.</td>
<td class="LabelValue" valign="top" align="left" height="32">The applicant, and the employer (if applicable), certify that the undersigned has/have the authority to execute this Agreement.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">2.</td>
<td class="LabelValue" valign="top" align="left" height="32">Enrollment in the Medical Assistance Program does not guarantee participation in MDCH managed care programs nor does it replace or negate the contract process between a managed care entity and its providers or subcontractors.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">3.</td>
<td class="LabelValue" valign="top" align="left" height="32">All information furnished on this Medical Assistance Provider Enrollment & Trading Partner Agreement form is true and complete.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">4.</td>
<td class="LabelValue" valign="top" align="left" height="32">The providers and fiscal agents of ownership and control information agree to provide proper disclosure of provider's owners and other persons criminal related to Medicare, Medicaid or Title XX involvement. [42 CFR 455.100]</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">5.</td>
<td class="LabelValue" align="left" height="32">The applicant and the employer agree to provide proper disclosure of any criminal convictions related to Medicare (Title XVIII), Medicaid (Title XIX), and other State Health Care Programs (Title V, Title XX, and Title XXI) involvement. [42 CFR 455.106 and 42 U.S.C. ? 1320a-7]</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">6.</td>
<td class="LabelValue" align="left" height="32">I agree to read the Medicaid Provider Manual from the Michigan Department of Community Health (MDCH). I also agree to comply with 1) the terms and conditions of participation noted in the manual, and 2) MDCH's policies and procedures for the Medical Assistance Program contained in the manual, provider bulletins and other program notifications.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">7.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with the provisions of 42 CFR 455.104, 42 CFR 455.105, 42 CFR 431.107 and Act No. 280 of the Public Acts of 1939, as amended, which state the conditions and requirements under which participation in the Medical Assistance Program is allowed.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">8.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with the requirements of Section 6032 of the Deficit Reduction Act of 2005, codified at section 1902 (a)(68) of the Social Security Act which relates to the conditions and requirements of "Employee Education About False Claims Recovery."</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">9.</td>
<td class="LabelValue" align="left" height="32">I agree that, upon request and at a reasonable time and place, I will allow authorized state or federal government agents to inspect, copy, and/or take any records I maintain pertaining to the delivery of goods and services to, or on behalf of, a Medical Assistance Program beneficiary. These records also include any service contract(s) I have with any billing agent/service or service bureau, billing consultant, or other healthcare provider.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">10.</td>
<td class="LabelValue" align="left" height="32">I agree to include a clause in any contract I enter into which allows authorized state or federal government agents access to the subcontractor's accounting records and other documents needed to verify the nature and extent of costs and services furnished under the contract.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">11.</td>
<td class="LabelValue" align="left" height="32">I understand that the incentive payment requested using my National Provider Identifier (NPI) number will be made directly to the Tax ID Number (TIN) that was indicated during the registration process.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">12.</td>
<td class="LabelValue" align="left" height="32">I am not currently suspended, terminated, or excluded from the Medical Assistance Program by any state or by the U.S. Department of Health and Human Services.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">13.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with all policies and procedures of the Medical Assistance Program. I also agree that all disputes, including overpayments, may be adjudicated in administrative proceedings convened under Act No. 280 of the Public Acts of 1939, as amended, or in a court of competent jurisdiction. I further agree to reimburse the Medical Assistance Program for all overpayments, and I acknowledge that the Medicaid Audit System, which uses random sampling, is a reliable and acceptable method for determining such overpayments.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">14.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with the privacy and confidentiality provisions of any applicable laws governing the use and disclosure of protected health information, including the privacy regulations adopted by the U.S. Department of Health and Human Services under the Health Insurance Portability and Accountability Act of 1996 (HIPAA), and Public Acts 104-191 (45 CFR Parts 160 and 164, Subparts A and E). I also agree to comply with the HIPAA security regulations, as applicable, for electronic protected health information by the compliance date, which is currently April 21, 2005 (45 CFR Parts 160 and 164, Subparts A and C).</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">15.</td>
<td class="LabelValue" align="left" height="32">This Agreement shall be governed by the laws of the State of Michigan and applicable federal law including, but not limited to, the Health Insurance Portability and Accountability Act of 1996 (HIPAA).</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">16.</td>
<td class="LabelValue" align="left" height="32">The provisions of this Agreement are severable. If any provision is held or declared to be illegal, invalid or unenforceable, the remainder of the Agreement will continue in full force and effect as though the illegal, invalid or unenforceable provision had not been contained in this Agreement.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">17.</td>
<td class="LabelValue" align="left" height="32">Failure or delay on the part of either party to exercise any right, power, privilege, or remedy in this Agreement will not constitute a waiver. No provision of this Agreement may be waived by either party except in writing and signed by an authorized representative of the party requesting the waiver.</td>
</tr>
<tr valign="center">
<td class="Label" align="left" width="14%" colspan="2" height="32"></td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">18.</td>
<td class="LabelValue" align="left" height="32">If the nursing facility named on the Medical Assistance Provider Enrollment & Trading Partner Agreement is sold, the seller will notify MDCH of the sale at least ninety (90) days prior to the expected sale date. Further, it is understood that the sale will not be recognized for reimbursement purposes under the Medical Assistance Program until ninety (90) days after such notification. Provisions of 42 CFR 413.135(f) will be retrospectively satisfied at that time. Any exception must be approved in writing by MDCH. The new owner/provider must receive Medicare certification for all Medicaid-only beds in the facility within one year from the date of purchase of an operating nursing facility or from the date of reopening a previously closed nursing facility.</td>
</tr>
<tr valign="center">
<td class="Label" align="middle" width="14%" colspan="2" height="32">Medical Assistance Provider - Employer/Employee Conditions</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">19.</td>
<td class="LabelValue" align="left" height="32">The applicant is employed by the business listed, now referred to as the "employer", to provide Medical Assistance Program services to eligible beneficiaries at the service address listed.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">20.</td>
<td class="LabelValue" valign="top" align="left" height="32">The employer and the applicant shall advise MDCH within thirty (30) days after any change(s) in the employment relationship.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">21.</td>
<td class="LabelValue" align="left" height="32">The employer and the applicant agree to be jointly and severally liable for any overpayments billed and paid under Act No. 280 of the Public Acts of 1939, as amended, for services provided by the applicant to eligible beneficiaries.</td>
</tr>
<tr valign="center">
<td class="Label" align="middle" width="14%" colspan="2" height="32">Trading Partner Provisions</td>
</tr>
<tr valign="center">
<td class="Label" align="left" width="14%" colspan="2" height="32">The MDCH and its Trading Partner desire to facilitate the exchange of healthcare transactions ("Transactions") by electronically transmitting and receiving data in agreed formats in substitution for conventional paper-based documents.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">1.</td>
<td class="LabelValue" align="left" height="32">Companion Documents; Standards; Other Documentation. MDCH makes available certain inbound and outbound Electronic Data Interchange (EDI) transaction sets/formats and associated version. From time to time during the term of this Agreement, MDCH may modify supported transaction sets/formats. In submitting Transactions to MDCH, the Trading Partner agrees to conform to MDCH-issued provider publications and MDCH Companion Guides as amended from time to time. The MDCH Companion Guides, incorporated by reference herein, contain specific instructions for conducting each Transaction and as such supplement Implementation Guides issued under the Standards for Electronic Transactions mandated by the Health Insurance Portability and Accountability Act of 1996 (HIPAA) as amended. The MDCH Companion Guides are not intended to be complete billing instructions and do not alter or replace applicable physician guides or other healthcare provider billing publications issued by MDCH or by other third party payers. The Trading Partner agrees to comply with the requirements set forth in the applicable MDCH Companion Guides. The Trading Partner, or its vendor, or other authorized technical representative responsible for EDI software will document Trading Partner Information, data formats and related versions, trading partner identifiers, and other information MDCH requires to receive and transmit specific Transactions supported by MDCH.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">2.</td>
<td class="LabelValue" align="left" height="32">Support. 
As to software, equipment, and services associated with each party's performance under this Agreement, the parties agree to provide support services sufficient for Transactions to be exchanged. Each party will assist the other in establishing and/or maintaining support procedures, and will complete appropriate problem determination procedures prior to contacting the other with a support related matter. The parties agree to use all commercially reasonable efforts to avoid and resolve performance and unavailability issues. Each party will perform remedial action, as requested by the other, to assist in problem resolution. Each party, at its own expense, shall provide and maintain the equipment, software, services, and testing necessary to effectively and reliably transmit and receive transactions.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">3.</td>
<td class="LabelValue" align="left" height="32">Data Retention. 
MDCH will log all Transactions for the purpose of problem investigation, resolution, and servicing. The Trading Partner is responsible for maintaining and retaining its own records of data submitted to MDCH. Trading Partners who are healthcare providers will ensure that electronic healthcare claims submitted to MDCH can be readily associated and identified with the correct patient medical and business office records, and that these records are maintained in a manner that permits review, and for the time period as may be required by MDCH or other third party payer responsible for claim payment.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">4.</td>
<td class="LabelValue" align="left" height="32">Proper Receipt and Verification for Transactions. 
Upon proper receipt of any ANSI ASC X12N Standard Transaction, the receiving party shall promptly and properly transmit a functional acknowledgement in return, unless otherwise specified. The functional and interchange acknowledgements must be accepted and reviewed, when applicable, to confirm the receipt of a Transaction. The ability to send or receive functional acknowledgements is applicable only to ANSI ASC X12N Standard Transactions. Additionally, MDCH originated outbound Transactions must be accepted and reviewed, when appropriate, to obtain MDCH's response to specific inbound Transactions. The acknowledging party does not attest to the accuracy of the data contained in the transmission; rather, it only confirms receipt of the transmission.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">5.</td>
<td class="LabelValue" align="left" height="32">Liability. 
MDCH shall not be responsible to the Trading Partner nor anyone else for any damages caused by loss, delay, rejection, or any misadventure affecting such electronic information. In addition, MDCH shall be excused from performing any EDI servi

You cannot use string literal of more than 4000 characters in an Oracle SQL statement. I'm not going to count that string you so rudely posted but I presume it is longer than that figure. You'll need to use a variable instead.
declare
 c clob := '<your vast XML doc here>';
begin
 update PRVDR_ENRLMNT_AGREEMENT B set b.terms= c
 where ....
{code}
Cheers, APC

To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
Regards

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

HT4736 Taking too long (2 minutes) to locate and download photos into Photo '11 9.5 (902.7 build running on an older Intel based MacBook Pro with iPhoto libraries on a USB2 External HD). I checked and repaired HD permissions. Any ideas?

Regarding iPhoto '11 9.5 (902.7 build running on an older Intel based MacBook Pro with iPhoto libraries on a USB2 External HD). I am dealing with iPhoto taking too long to download photos. Specifically, I rechecked and repaired HD permissions. I am running the most current software my five year old Intel MacBook Pro can run. What happens is that when I connect an external SD card, or my iPhone, the new version of iPhoto takes up to two full minutes to fully acknowledge the device. Then locate new photos and be ready to download them to my external HD. I am kind of concerned about this. This has never happened before.
I take 20,000 photos a year. I really don't want to lose any. Or is there something I am doing wrong? Or need to be aware of? Any experienced suggestions would be appreciated. Thanks. Have a great day.
PS.... The cameras I use are Canon SX-30, Nikon D3100, and my iPhone 4S. Thanks again for your assistance.

Hello Old Toad.... Those sound like great ideas.
I thought I checked and repaired disk permissions on my main boot HD. That boot disk is Mac OS Extended (Journaled) Capacity 749.3 GB. Available 562.53 GB. BUT.... now that I think of it.... the Seagate external HD with USB2 interface is: Mac OS Extended (Journaled), Capacity 639.79 GB, Available 36.2 GB with my latest iPhoto Library 517.37 GB that was already scanned & updated to be read by the latest iPhoto version.
I'll try your suggestions tonight as far as double checking 'permissions' and setting up a tiny test library.
Or maybe it's time to fill up another External HD?
I appreciate your and anyone else's suggestions to try.
Have a great day. ~~ David in Rochester NY

SQL Error: ORA-01704: string literal too long

select * from table(fn_split('some 10000 characters with comma separation .........................'))
Error report:
SQL Error: ORA-01704: string literal too long
01704. 00000 - "string literal too long"
*Cause: The string literal is longer than 4000 characters.
*Action: Use a string literal of at most 4000 characters.
how to pass my 10k record string

933663 wrote:
The string is through a user interface.So, that interface is using what datatype for the string? What language is the interface written in?
insert into table
select * from table(fn_split('2,4,2,5,7'));Do you understand what a string literal is? You cannot provide a varchar2 string that exceeds 4000 bytes from within SQL. Fact. It just cannot be done.
If you are passing the string from a user interface using a datatype that supports more than 4000 bytes, and you pass it directly to PL/SQL code by calling the function or procedure directly (not using SQL) then you can use up to 32767 bytes for your VARCHAR2.
The code you've posted (which happens to be some of my own code posted years ago on these forums) takes a VARCHAR2 as an input. You would have to change that to accept a CLOB datatype and work on the CLOB instead. However, you still wouldn't be able to pass in a string literal of more than 4000 bytes from SQL for it.
Looking at your other thread: Seperate the string value
... it looks like the 'user' is trying to pass in a table definition. What is it your application is trying to do? Surely you are not trying to create a table at run time?
So explain, what is the business issue you are trying to solve? We may be able to provide a better way of doing it.

Importing a table with a BLOB column is taking too long

I am importing a user schema from 9i (9.2.0.6) database to 10g (10.2.1.0) database. One of the large tables (millions of records) with a BLOB column is taking too long to import (more that 24 hours). I have tried all the tricks I know to speed up the import. Here are some of the setting:
1 - set buffer to 500 Mb
2 - pre-created the table and turned off logging
3 - set indexes=N
4 - set constraints=N
5 - I have 10 online redo logs with 200 MB each
6 - Even turned off logging at the database level with disablelogging = true
It is still taking too long loading the table with the BLOB column. The BLOB field contains PDF files.
For your info:
Computer: Sun v490 with 16 CPUs, solaris 10
memory: 10 Gigabytes
SGA: 4 Gigabytes

Legatti,
I have feedback=10000. However by monitoring the import, I know that its loading average of 130 records per minute. Which is very slow considering that the table contains close to two millions records.
Thanks for your reply.

Solaris 8 IA "Device busy too long"

Similar Messages

Maybe you are looking for