Solaris 8 in ultra 2 got panic and auto reboot when install Oracle software
Dear all,
I installed Solaris 8 by selecting 'Entire Solaris Software Group' and select 32 bit support only in an old ultra II machine. Then I tried to install Oracle 8.1.7 in the same machine but machine always got panic and started auto reboot when Oracle installed about 17% or 20% or even 70% (I tried install the minimum of Oracle).
What is the problem? Anyone can help?
Thanks in advance,
Vicky
I think you need to check the parameters like SHMMAX etc in /etc/system file as recommanded by oracle if not already added you need to add them .Oracle manuals have a list of these parameters and don't forget to reboot and boot with boot -r after adding these parameters.
Make sure you have sufficient memory or some patch recommanded by Oracle .
Hemant
http://www.adminschoice.com
Similar Messages
-
[Solaris] rebooting in installing Oracle 10g R2 after Clusterware install
Hi..
Currently I am practicing the configuration of Oracle 10g R2 RAC (Solaris x86-64) with a Clusterware 10g on VMware
With the installation of Oracle Clusterware 10g software, there's no problem and look like working well on both nodes.
But, whenever I try installing the Oracle 10g R2 with 'install the software only' option, I got unstoppable rebooting
problem on the first node, rac1.
I tried both installation mode: OUI-typed and Silent approaches. Nothing worked!!
I wanted to figure out why this problem happened, but so far I did not have any bright answer for this. I looked in
the log and error files from /u01/app/oracle/oraInventory/logs, but there's no good answer or hint to resolve the
problem I have now.
Until now I tried 4 times of installations, but all stopped and were automatically rebooted at the same point with
almost 3% copying of software. I found some of trainers are having same problem I have now.
oracle@rac1 ~ $ crs_stat -t
Name Type Target State Host
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE ONLINE rac1
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE ONLINE rac2
This happens whenever I install the Oracle 10g R2 software.
Is there any unknown or hidden problem regarding CRS or something else?
Anybody has some hints or solution to this problem? If so, please let me have it ASAP.
Thank you so much.I have gone through similar problem when installing oracle 10g in linux. You should follow the oracle installation documentation and make sure that all required OS patches and packages must be installed before starting the oracle installation. In my installation few OS packages was missing in the oracle documentation too and searching over the net solved the problem. I have installed few extra OS packages (RPM) and installed oracle successfully.
Regards
Asif Kabir -
Auto reboots when battery is lower than 50%
Hi, I have my 4s 16gb from this year Jan. I knew that Iphone 4S long have a problem with the battery. It is horrible but recently my unit will auto reboot when the battery is lower than 50%............ which I can only use my phone with 3G for 4 h then have to recharge........... Plz help!!!
JUst in windows or osx too?
-
when downloaded adobe bridge on trial and select english ,when installed it comes up in Chinese language, i have uninstalled and installed a few times and this still happens ?
Unusual to be getting a DEP in those circumstances. (Still, I haven't been around all that much in recent times. So the world may have changed.)
What seems most likely is that we've got an iTunes preference file gone bad in some way. So I'd try the "Remove iTunes preferences files" section in the "User-specific troubleshooting" section from the following document. (Note you'll have to make sure that "Show hidden files and folders" is set on the PC in order to find the pref files.)
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay
Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry -
I installed Adobe Photoshop Elements 11 in my computer before. Right now I'm not using that computer anymore and want to re-install the software to a new computer. I still have the redemption code. Can you please provide me the download link or which ever way I can re-install the software to the new computer? Thank you.
Hi,
Please go to the link below to download Photoshop elements 11
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
To get your serial number from redemption code click on the link below
https://redeem.licenses.adobe.com/getserial/s/redeem
Thank you,
Mohd. Naseem -
i do not remember my password of filevault and i can not install some softwares on my mac please help me
Are you sure FileVault is active? You could not have started up without entering the password.
If you are sure, see below.
If you forget the password and FileVault is on -
If I sign up for LR and PS, may I install the software on both my desktop and laptop computers?
If I sign up for LR and PS, may I install the software on both my desktop and laptop?
Yes. You aren't supposed to use them simultaneously.
Hal -
Kernel panic and no reboot allowed. What next ?
Hello,
i have to apologize, i'm not very fluent in english. My MacPro 3.1 early 2008, quad-core 2.8 GHz Intel xeon started experience a permanent Kernel panic problem at boot six month ago. I tried many tips and tricks, reboot in safe mode, reboot without extensions, clean the p-RAM at startup. Nothing seemed to work and i constantly end up with a grey screen with weird white stripes on it and the kernel panic message (black background and reboot thingie).
A bit upset, as i couldn't boot, i finally erased the disk and tried a brand new install.
There, i got a message stating that i need at least 2 GHz memory to install... Wich I theorically got : 2x1 GHz DIMM DDR2. It seems only 1 GHz is taken in count
(checked on a screenshot i previously printed of my mac specifications). I then thought i found the problem and tried switch the memory cards and bars. But it still remains helpless.
I then owns a very heavy and expensive paperweight...
Can anyone help me find what's wrong and get a new install ?It seems only 1 GHz is taken in count
Some of your RAM memory has FAILED. That is the source of ALL your problems. -
CSS 11050 SYN Attacks and auto-reboot
Running software version 5.00 build 2 to load balance two web servers. The DOS log shows SYN attack activity--with one incident logging 62 "attacks". I read that if this value reaches a threshold, then the machine will reboot. Can someone tell me what the guidelines are for this? Are there any other events that can cause the switch to auto reboot? Thanks!
First, you should definitely upgrade.
5.0(2) is VERY VERY OLD.
Next, a box never reload by itself on purpose or because it reached a certain threshold.
If there is an auto-reboot, this means the box crash and this is not normal.
Gilles. -
Please Help! My MB pro 2010 quit and auto restart when I upgrade my MB Pro with a SSD
Hi all!
Please let me know what's happen with my Mac & help me to solve this problem pls?
Since my Mac is on normall working but a little bit slow. So that's why I update it to SSD. But from that day, when I'm working, it suddenly quit & auto restart without reason, just only appear the warning " Your Mac have problem" & restart.....
Attached here is which appeared on my screen after it auto restart, please go throught it & let me know what I should do for avoiding this problem, pls!
And here is my MAC info :
Macbook Pro 15-inch, Mid 2010
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics Intel HD Graphics 288 MB
Software OS X 10.8.5 (12F45)
My SSD info:
Total Capacity : 256.1 GB (256,060,514,304 Bytes)
Model : V4-CT256V4SSD2
Firmware Version : S5FAMM22
Drive Type : Crucial SSD
HDD info:
Total Capacity : 320.1 GB (320,072,933,376 Bytes)
Model : Hitachi HTS545032B9SA02
Firmware Version : PB3AC60W
Drive Type : HDD 5400 rpm
Please Help me!
Thank you!Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton -
Treo 755P from TELUS freezes and/or reboots when using bluetooth headset
My treo 755P has worked fine for almost a year. I recently purchased a Motorola H870 headset. Since then the phone freezes up and/or reboots several times a day. Sometimes when I am dialing and sometimes apparently randomly. I have worked with my provider, TELUS, but have no resolution. I am using the latest Palm desktop software and I have tried a hard reset on the phone. Any other ideas??
Thanks.
Jason
Post relates to: Treo 755p (Sprint)Hi.. Welcome to the Palm forums. Lets put things in order here:
1- got 755p and worked fine for almost a year
2- purchased Motorola H870 and 755p starts freezing.
Bottom line here is that you 755p worked find until the H870 was introduced. This headset is not on Palms bluetooth compatibility list. For the list see this link: http://kb.palm.com/SRVS/nua/launchKB.asp?c=44829 .
I would recommend that you do a hard reset and do not sync or use the H870 for atleast 24hrs. If the 755p works fine that will confirm the H870 is the problem. If your still having the problem then you will need to look at a repair/replacment. -
WRT54GS v5.1 auto reboot when wireless device connects
Hi,
I'm using the linksys WRT54GS wireless router v5.1
Current Firmware version v1.50.9, Sep. 14, 2006
The problem that I have is that everytime a new device connects to the Router wirelessly, the router reboots itself.
After the reboot, everything seems to be working fine. This becomes quite annoying when it comes to gaming and another family member turns on their laptop and then I get disconnected by the router because they are connecting.
What I have done upto now is reset the router after doing the FirmWare Version update and the problem still occurs. (The problem was still there even before I had done a FirmWare Update.)
Is there a way to solve this problem? because I have read about a few other problems just like mine on the forums and they don't seem to have been resolved.
Or will I have to go back to PCWORLD to see if I can get a refund / replacement?
Message Edited by chopsticks on 11-11-200611:05 AM
Message Edited by chopsticks on 11-11-200611:05 AM
Message Edited by chopsticks on 11-11-200611:08 AMI do not see a "keep alive" option. I use the Automatic Configuration - DHCP because I have connected, a CABLE MODEM provided by my cable provider Telewest Blueyonder
The router just reboots when the wireless laptops connect. The wired desktop (this PC) loses connection as it is rebooting and regains connection after the reboot. Then both PC and Laptop work fine.
Message Edited by chopsticks on 11-12-200612:03 PM -
Help...just got nano and itunes isn't installing :(
When installing iTunes error comes up.
"ERROR
String PRODUCT_NAME was not found in string table"
Click OK, another error comes up.
"UNHANDLED EXCEPTION
Error number 0x80040706
Description Objecty reference not set.
Setup will not terminate"
It closes. Reset my windows and no difference.
HELP!!!Search the forums or google for the error that is occurring and you'll find resolutions.
Maybe you are looking for
-
I believe what I must do is install a driver but I don't know where the drivers are indexed at in apple. Itunes is up to date, and I am using the USB that came with the Ipod.
-
Error while receiving message from partner.
HI All, i am having interface Thrid Party -- > XI -- > SAP We are using AS2 adapter at sender side and IDOC as receiver end. My scenerio was working fine till quality server and when we went live message started failing in seburger workbench. AS2 mes
-
Screen exits linking to standard screen
Hi sap guru's, I am sivakumar, i am working with exit on IS-U and CRM if anybody have the idea on these concept give reply. I nedd a help on Screen exits, can any one pls send me deatail procedure for creating screen exit and the important thing how
-
I cannot download the program, I boght it three times but is always the same, when I try to download does not do anything. I could do it whit photoshop but not working in ligthroom
-
Bt homehub 2.0 phone suddenly dead !?!
the fone on my homehub has suddenly stopped working,all I get is unobtainable tone. All other fones in the house are ok, have tried resetting the hub no joy. I dont use bt broadband anymore is this the problem? surely the fone should still be ok.