Solaris 8 installation in Dell 8100 met "Resource Confilict"

Hello There,
During I installated Solaris 8 in Dell Dimension 8100, I received the warning message:
"Resource Conflict: both devices are added.
NON-ACPI device:PNP0c01
Port 800-8DF, C00-C7F; Memory FFB00000-FFFFFFFF
ACPI device:PNP0C01
Memory: 9FC00-9FFFF, 3f87000-7F86FFF, FFFB0000-FFBFFFFF, FFC00000-FFFFFFFF."
How can I recovery this "CONFLICT".
Thanks very much !!!
Jack

AFAIK, this is a warning and can be ignored. But on dell
systems there a lot of other problems that can prevent
a successful solaris 8 installation (dell keyboard problems,
problems with a panic when the system include a 3com
3c905c NIC, ACPI problems, ...).
See also:
http://groups.yahoo.com/group/solarisonintel/message/26542
Does it crash/reboot when you continue?
Try to boot from the "Software 1 of 2" CDROM and at the
"1 interactive or 2 custom jumpstart" prompt type "b kadb -v"
instead of "1" or "2". In case it crashes while booting the
solaris kernel from cdrom, this should give some usable
error message...

Similar Messages

Oracle8i8.1.7 installation onto Dell 8100 P4 1.5GHz

I am having trouble in the installation of the 8i to my system. My computer is Dell 8100
Pentium 4 1.5GHz. Whenever I insert the Oracle 8i to my dvd-rom drive to install that, the installation doesn't go well. At first, it shows autorun screen where I choose to install the 8i. Then the autorun screen disappears shortly, and for a very short period, the cdrom drive seems to be running by indicating the green light, but then it stops. No further installation procedure occurs any more. i don't know what the problem is. Since the other softwares are always installed well without any problem. Only this Oracle8i8.1.6 or 8.1.7 causes this kind of problem. Currently I just installed Oracle8 8.0.5 to my system. Very weirdly, the old version of Oracle was installed with no problem. But I really need to install O8i8.1.7 to my system. I'd like to know whetehr there is any other persons experiencing the same problem like me.

Hi, Im new to this oracle world, we just got a Dell 8100 1.3GHZ P4 machine running win 98 SE. I tried to intall the Oracle8i Personal Edition, but allways get this error message from windows:
JREW caused an invalid page fault in
module JAVAI.DLL at 0187:6ee37f8a.
Registers:
EAX=00000057 CS=0187 EIP=6ee37f8a EFLGS=00010202
EBX=c0000005 SS=018f ESP=0063ebf0 EBP=0063f17c
ECX=d2ad82e0 DS=018f ESI=00000015 FS=1947
EDX=817887fc ES=018f EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
Stack dump:
0063f17c 0063f298 0063f1c0 c0000005 00000000 00000000 00000000 00400000 00010000 00000000 00020000 6ee37a19 00000015 0063edb8 00000104 0063ec58
Look's like some of you also havin this kind of problem, is the any solution for this.. pls drop me a line if there is any solution.
Thanking u in advance
Muraly (Malaysia)

Solaris 8 on Dell Inspiron 3500 ?

Hi!
Is there anyone who successfully installed Solaris 8 on a Dell Inspiron 3500 laptop? The problem is with the video card (NeoMagic) which is not automaticaly recognized by Solaris installer.
Thanks for any advices,
Claudiu

I am trying to install on a Dell Latitude laptop. I cant get very far though. Please see below:
I'm quite familiar with Solaris 8 and have done numerous installs
including dual boot on x86, and jumpstarts on Ultras.
I am trying to install x86 on a Dell laptop. No problems with setting up
the bios, and telling it to boot into the Solaris install menu. (from 1
of 2 cd)
My problem is this:
When I get to the language preference question, my keyboard mapping is
shot. I've tried numlock off and on, and used 3 different keyboards.
Laptop keyboard out of docking station, and two different keyboards
while the Dell is docked.
Funny thing is, the mapping is fine until the point where the install
program wants language preferences entered. I tried various keys and the
whole mapping of the keys on the board is off.
As I mentioned, in the earlier phase of the install program, when it
asks if you want Jumpstart, the mapping is fine. I did not have this
problem on my x86 install on my tower, (same keyboard tested as bad on
the Dell) and used the exact same cd's (1 of 2) that sun sent.
So I tried to configure Jumpstart to get around the mapping. Booted the
Dell bios to boot from the network using BOOTP, which is the core
protocol that Jumpstart uses. No go. Used the procedure from the Sun
Admin 2 class, it is proven to work on an Ultra environment. No go on
x86 though.
Any suggestions?
Thanks much,
Sam

Installation on Dell PowerApp 100 - No Disks

I am receiving the following error while attempting to install Solaris 8 on my Dell PowerApp 100.
"No Disks meet the criteria in the Solaris installer documentation found."
The server is listed in the Hardware Compatibility document as having Level 1 support.
I have tried using both the diskette and the CD-ROM to boot and install and receive the same message. I have also downloaded the latest Device Configuration Assistant (10/01) and used to to boot.
The following device is found during the device search:
Adaptec 29160/N/LP Ultra160 SCSI HBA
The following drive is listed as a potential boot source during installation:
Target 0:Quantum Atlas V 9 WLS 0201 on Adaptec 29160/N/LP Ultra160 SCSI HBA in PCL Slot 2
It would seem that since the drive is listed as a potential boot source that the installer is able to see the drive, so I'm getting a little miffed as to why it can see it to install.
Thanks for any suggestions you can provide.
-- Scott

Jacob,
I'm seeing the same issue. Have you received a reply from anyone? If so, would you share?
thanks.
I'm trying to install Solaris 10 on Dell PowerEdge
2850.
The Kernel boots from CD without any problem but
configuring devices stage lasts very long without
any success.
At least after "Configuring devices" message I got
in ~15 min (!?):
Using RPC Bootparams for network configuration
information.
Attempting to configure interface e1000g1
Skipping interface e1000g1
Attempting to configure interface e1000g0
Skipping interface e1000g0
Than \ continue rotating ... and no result.
I can't find any suitable drivers for my comp
anywere.
Jacob.

Unable to install Solaris 10 on Dell PowerEdge 2850

The Kernel boots from CD without any problem but the "configuring devices" stage lasts very long without any progress/success.
The following messages appear, and the install seems to hang at this point:
Attempting to configure interface e1000g1
Skipping interface e1000g1
Attempting to configure interface e1000g0
Skipping interface e1000g0
This is a PowerEdge 2850, no RAID, three 73Gb drives, 2x3.4 GHz processors, 4 GB mem.
Attempted to install Solaris 8 and 9 and no success with either.
Please help.
thanks.

Hello,
I had a similar problem with an install on Dell. It appears it comes from the screen and/or video configuration detected by the installer. The installer try to test the screen conf and freezes.
To resolve, i had to choose the #4 option installation (console only).
When Solaris installation asks for validating the screen conf. press Esc and Continue (F2 ...) then choose BYPASS (F4) the test configuration.
You have to do the same with the CD 2 because the installer detect you did not validate the configuration before. At this step, press F5 to bypass again.
After that, all works well.
Hope this help you.
Kub.

FANAQ: Solaris 8 on Dell CPx

This is one of those Frequently Asked but Never Answered Question. I am having problem with install Solaris 8 on my new Dell CPx. The frist problem seems to be that the Solaris kernel does not recognize the system keyboard. I was able to use USB keyboard to perform installation ok, but when I booted it up, I endup with a blank screen even with the USB keyboard. I guess I may have to solve these problems one by one. I know that Sun has a translate program that translate Linux dev. drivers to Sun driver. So if someone can point out what missing driver could cause the keyboard problem, I may try to work that first, then bit-by-bit, I hope I can have Solaris 8 running on Dell Laptop.
Of course, if someone has already installed solaris 8 on Dell CPx, I'm glad to learn the tricks.
thanks.
steve

dont think so..not for the 7500. post here if you get it working for the 7500.

Solaris 7 on Toshiba 8100 notebook ?

Hi,
Has anyone has the experience of installing solaris 7 on Toshiba 8100 laptop? or knows anywhere can download the driver for that model? My problem is solaris always say unknow monitor type when installing and I can not find the monitor type from the existing monitor list.
Any advice will be appreciated.
Top

I have Toshiba Tecra 8100 with RedHat 6.2 installed.
I wouldn't try to get Solaris 7-8 running there though.
Toshiba Tecra 8100 has an S3 Savage MX / 8Mb card
(a crapy one, ATI were much better in 8000 series)
You don't have to run X Windows in installation just
run install in text mode (which is avialable).
After install completed, go to -s mode and remove /etc/rc3.d/S9?dtlogin. You'll have a working Solaris at
that point.
Then you have 2 options: first get XFree86 running
and grab configs from Linux on Laptops page for
S3 Savage MX; second option is to purchase Accelerated X
server for Solaris from www.xig.com (150$). They support
S3 Savage. (I personaly would go with Accelerated X option).

Help install solaris 10 on dell 430SC

tried without success install solaris 10 on dell 430SC.
the installation hangs at the very begining with no
appreant errors . any suggestions?thanks.

I couldn't get Solaris 10 to install.
However, I downloaded the Solaris express 11 b24 and that installs fine. It runs the 64 bit kernel :) No problems so far.
The graphics for the SC430 is a little odd. We use the SUN window system (not XOrg) and select the XF84Intel driver for the card. This works fine, trouble is it tends to like to start in a very high res mode i.e 1600xmnnnn. Run KDM config and drop the resolution.
This release uses the grub boot loader which is different but good.
Best of Luck

Can't install Solaris 10 on DELL VOSOTRO 200 ?

Hi All,
I am new to SOLARIS, and wanted to play with it.
I tried to install Solaris 10 ON dell VOSOTRO 200 and it does not install at all. It gets stuck at the very first place. I tried open solaris and Solaris in all different ways, CD/DVD/USB.
I used the same CD/DVD in Emachine and they get install just fine. Is solaris not compatible to DELL VOSOTRO? Or am I doing something wrong ?
Any answer would be appreciated.
Thanks,
Envrionment
SOLARIS 10, 32 Bit.
DELL VOSOTRO 200
Thanks,
jfk

Hi, I had a similar problem when I tried to Install Solaris X86 on an HP Proliant DL586g2. You'll probably find the problem Is that you need to Install some drivers first to enable the Installation. If you need more specific details I can probably find a guide on how to do this. But I'm certain It Is possible to run Solaris on the Dell It just might take a bit of perseverance.
Good luck

No Disk meet the criteria for Solaris installation

Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
Appreciate for any help.
Wallace

Did you check that your adaptec scsi controller is
supported by solaris and/or has a working driver
(from sun or adaptec) ?
Here's the HCL for solaris 8 x86:
http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

How do I determine what type of Solaris installation I have ?

I'm runnig "SunOS PSP 5.8 Generic_108528-13 sun4u sparc SUNW,Sun-Fire-480R" but I would like to determine the type of Solaris installation I have....do I have a a "development" installation ? Do I have all the SUNW developer packages ? Also what are the "types of installations" that are possible ?
I'm thinkig about download the mysql binary (from Sunfreeware.com) and I went to the dpendencies site (http://wwws.sun.com/software/solaris/freeware/s8u7dependencies.html) to check what dependencies exist and I saw the following line (among other non "related" info.):
mysql-3.23.43 gcmn-1.0 ncurses-5.2
What exactly does this mean ?

Hi
You can check the type of solaris install from the below file
/var/sadm/system/admin/CLUSTER
Regards

Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

Hi there
I am installin sloaris 8 in Pentium Pro Machine with Quantum Firball Hard
Disk 10 GB , at installation time the Solaris recognize the existance of the hard disk by givingme the option to load from CD ROm or the Quantum Hard disk but later on it gives me the following message
No Disks that meet the Criteria in the solaris installer documentation
Your help will be appreciated
Thanks

Hi
I am using IDE Controller not SCSI, the Hard disk is being partitioned using Dos FDISK , When i got this problem Solrais write this message after the error i mentioned before
Please Check the system or try another installation option
then it gives me Unix Prompt , I tried to use FDISK but could not get the right Disk name , I tried FDISK /drv/dsk/c0t0d0s0 or /drv/rdsk/c0t0d0s0
but no way , I am new to Unix any way , I tried to get the disk name through df,sysdef,prtconf but could not as well , I guess may be the solaris partition is the problem ? may be if i could creat a solaris partition it will solve it ? , I am using the full version of solaris 8 not the beta one.
Thanks for your help
Roushdy

Solaris 9 on Dell Power Edge 6650 x86 system

Does anyone have driver for PERC3 controller for Solaris 9, which comes with Dell Power Edge 6650?? We are tring to install Solaris 9 on Dell Power Edge 6650. The error we get is "No Hard Disks Fount".
Thank U!

After thrashing for 2 weeks with the onboard 7880 SCSI and onboard 7890 RAID controllers, I was finally able to load up Solaris 8 on a Poweredge 2400. (4/01 build)
The only way I was able to do it was configure the server as below:
7880 SCSI: CD-ROM drive only device on this controller, set to ID 5.
7890 RAID controller: Disabled. Dont' believe Dell or Adaptec, this card will not work with Solaris 7 or 8. Even with the RAID chip removed and running as standard SCSI controller, it still would not work.
Adaptec 2940 U2W: 9G Quantum Atlas V drive with HP SureStore DAT 24i drive.
PERC II RAID controller yanked out of older 4100 system, 3 drives running RAID 5.
Important note: Do not attach anything to the 7880 controller besides the CD. The system will not boot if attempting to boot to the HD or if you attempt to boot from CD, it will hang at the adp.bef file.
Hope this helps..
Mike

Link to download X86 Solaris Installation for weblogic 10.3

Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.
I am only able to see installables for X86 windows,X86 linus & sparc but nothing for X86 Solaris.

Hi;
Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.I belive its not available. Please check :
WebLogic 10.3 availability?
Also check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Regard
Helios

How to get the free space from logical drive for solaris installation?

Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

Hi,
See: http://www.sun.com/software/solaris/self_help.jsp
At the bottom of that page, FAQ # 3
HTH,
John

Solaris 8 installation in Dell 8100 met "Resource Confilict"

Similar Messages

Maybe you are looking for