Solaris 8 installation

Hello everyone,
i have ultra 30, 10 and 2. my question is whether i can install solaris 8 in these systems. next question is whether they have network and graphic cards in each machines.
if anyone can help, please drop the line asap.
thanks

All 3 can use Solaris 8.
All 3 will have an on-board RJ45 TPE (Twisted Pair Ethernet) connector controlled by a chip set (not card) on the System board.
Ultra 10 will have on-board HD15F Video connector controlled by a chip set (not card) on the System board. Ultra 1 & Ultra 30 will require a Frame Buffer card (Video Card).

Similar Messages

No Disk meet the criteria for Solaris installation

Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
Appreciate for any help.
Wallace

Did you check that your adaptec scsi controller is
supported by solaris and/or has a working driver
(from sun or adaptec) ?
Here's the HCL for solaris 8 x86:
http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

How do I determine what type of Solaris installation I have ?

I'm runnig "SunOS PSP 5.8 Generic_108528-13 sun4u sparc SUNW,Sun-Fire-480R" but I would like to determine the type of Solaris installation I have....do I have a a "development" installation ? Do I have all the SUNW developer packages ? Also what are the "types of installations" that are possible ?
I'm thinkig about download the mysql binary (from Sunfreeware.com) and I went to the dpendencies site (http://wwws.sun.com/software/solaris/freeware/s8u7dependencies.html) to check what dependencies exist and I saw the following line (among other non "related" info.):
mysql-3.23.43 gcmn-1.0 ncurses-5.2
What exactly does this mean ?

Hi
You can check the type of solaris install from the below file
/var/sadm/system/admin/CLUSTER
Regards

Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

Hi there
I am installin sloaris 8 in Pentium Pro Machine with Quantum Firball Hard
Disk 10 GB , at installation time the Solaris recognize the existance of the hard disk by givingme the option to load from CD ROm or the Quantum Hard disk but later on it gives me the following message
No Disks that meet the Criteria in the solaris installer documentation
Your help will be appreciated
Thanks

Hi
I am using IDE Controller not SCSI, the Hard disk is being partitioned using Dos FDISK , When i got this problem Solrais write this message after the error i mentioned before
Please Check the system or try another installation option
then it gives me Unix Prompt , I tried to use FDISK but could not get the right Disk name , I tried FDISK /drv/dsk/c0t0d0s0 or /drv/rdsk/c0t0d0s0
but no way , I am new to Unix any way , I tried to get the disk name through df,sysdef,prtconf but could not as well , I guess may be the solaris partition is the problem ? may be if i could creat a solaris partition it will solve it ? , I am using the full version of solaris 8 not the beta one.
Thanks for your help
Roushdy

Link to download X86 Solaris Installation for weblogic 10.3

Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.
I am only able to see installables for X86 windows,X86 linus & sparc but nothing for X86 Solaris.

Hi;
Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.I belive its not available. Please check :
WebLogic 10.3 availability?
Also check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Regard
Helios

How to get the free space from logical drive for solaris installation?

Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

Hi,
See: http://www.sun.com/software/solaris/self_help.jsp
At the bottom of that page, FAQ # 3
HTH,
John

No Disks that meet the citeria in the Solaris installer documentation found. Please check the system or try another installation option #

I'm tring to install this on an IBM netfinity 5100 server which has ultra 160 scsi drives.I get this message
"No Disks that meet the citeria in the Solaris installer documentation found. Please check the system or try another installation option #"
Please help me. I new to UNIX and SOLARIS.Thanks!
VC

You are probably using the INSTALL CD that comes with Solaris x86.
Don't use it but use the Software CD 1/1 to boot and install the system instead. The INSTALL CD is supposed to be used on a completely blank system (no other OS's) although even there I think Software CD 1/1 does the job.
Also, if you are new to Solaris I advice you to get the FAQ (you can find it on e.g. http://www.science.uva.nl/pub/solaris/solaris2- it should be really helpfull during the first few weeks/months on Solaris

Is Perl part of default Solaris Installation ?

I am devloping an application which invokes a few perl scripts during installation. I just want to know:
Is Perl part of default/standard Solaris Installation ?
How safe is it to assume existence of Perl on client-side Solaris System?
Thanks & Regards,
Satish

Perl has been in Solaris in /usr/bin since Solaris 8. I am not completely certain, but I believe it is included in all metaclusters including the minimal Core cluster.
Richard

Flash installation - fatal error. solaris installation program exited

Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error.
Any ideas?

paulfoel wrote:
Any ideas?http://www.unix.com/solaris/217675-solaris-10-flash-installation-fatal-error-solaris-installation-program-exited.html
You could have mentioned you were cross-posting this to other sites.

Solaris installation - ORA-01034

On my Solaris installation I am getting a - ORA-01034 error at the Database Configuration Assistsance screen
olny option I get is to ignore or Abort
I get about 20% loaded then I get the error
Any suggestions?

Hi,
What are the other messages u r getting.
R u getting ORA-27102 also.
This problem is the result of the kernel parameters for Oracle not being setup properly in the /etc/system file.
Please see the Installation Guide for complete instructions.
Here is an example of the Oracle related settings in the /etc/system file.
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=20
set semsys:seminfo_semmns=2000
set semsys:seminfo_semmni=70
Please reboot your machine after making any changes to the /etc/system file.
Thanks
Aravind

Which Name Service for Solaris installation behind router?

I want to install Solaris on my computer in a small home LAN behind a router.
The Solaris computer is not part of a zone, a domain and there is no own DNS server in LAN.
I want Solaris to get the DNS from router which in turn gets the DNS server assignments from network provider.
This is similar to a Windows installation which gets the current DNS servers defintion from network provider at connection startup.
Now what do I have to select during Solaris installation? See attached snapshot
I guess LDAP, NIS and NIS+ are not suitable.
Do I have to select "None"?
Does DNS mean "own DNS server in LAN" or "DNS from router" (as intended)?
Thank you
Peter

Hello
I don't know you home setup but in general you will have to use DCHP so solaris will get all info from the route the ip and dns etc..
If you want to use a static ip you will have to config the DNS by hand.
Regards
Eze

Minimum Solaris installation for Directory Server

Hello,
i want to set up a new Solaris installation for Sun ONE directory server.
But i don't want to install always the "entire distribution" and then turn off all services. I want to keep the solaris os installation as small as possible. Has anybody tried this before and can report some experiences? Is the "reduced network" cluster the right way to go or better the "core" cluster? Does anybody have a list of the packages which must be installed after a minimal solaris installation for the ds to work?
Thanks a lot,
af_inet

Since you original question is "minimum requirement
at the SERVER", I would say that X is not really
needed at the server end if you use installer text
mode CLI (command is "./installer -nodisplay")
instead of installer graphical mode (GUI). However,
to fix uninstall/reinstall issue, X is needed as the
"prodreg" which is used to uninstall packages is a X
program, without text mode option.This is correct.
It is not a must to run ./startconsole (X program)
LOCALLY so as to perform DS admin functions as you
could always run SUN ONE Console REMOTELY from any
remote host (Windows or UNIX/Linux) with just the
console binaries installed. (for large data centre
env. the LDAP server is usually locked in server room
away from your desk and you tend to use remote admin
console).This is correct too. I think it's a matter of taste if i want to install console on the DS itself or on a separate host. As long as i have only one DS i will leave it on the machine itself. But you are right, this is not a must. So i should have asked my question more precicely :-)
Thank you very much,
Chris

Step by Step RAC 11GR2 with Grid Infrastructure on Solaris installation

Y'ello All,
Please I need documentation for RAC 11GR2 with Grid Infrastructure on Solaris installation urgently.
Thany you very much for your support
BR,

What type of shared storage will you be using?
Properly configure DNS
Properly configure /etc/hosts files
Properly configure SCAN
Properly configure SHARED storage (Preferably ASM - "raw" devices) - make sure you partition the disk devices to "skip" the first 1MB of the device)
BEFORE installation, confirm grid-owner and oracle-rdbms-owner can read AND write to these shared devices from ALL nodes. Permissions must be set to <grid-owner:<grid+oracle shared group> (grid:oinstall where oracle is also in the oinstall group)
Properly configure ssh password-less connections for both GRID-owner AND oracle-rdbms-owner.
IP addresses required
3 SCAN addresses that point to myhost-scan.mydomain.tld in a round-robin fashion
PER NODE:
1 public IP address
1 virtual IP address
1 interconnect IP address should be iin /etc/hosts ONLY - Non-routable and not reachable via the public interface. DO NOT use CROSSOVER cable.
Interconnect should be on a DEDICATED INTERCONNECT switch.
As for the SHARED storage, the LUNS/Devices can be "carved" out on your SAN by your SAN admin. MAKE SURE that ALL devices in a given diskgroup are EQUAL size. (ie - DATA000=250GB/each, DATA001 500GB/each etc)
The installation guide gives a lot of directions on PRE-REQUISITES. Follow them. And remember, since you are new to this, you may install this several times before you get it the way you need it to be. Even installing MANY RAC clusters on multiple platforms, I still install it 2-3 times. Generally because the SA has forgotten some pre-req step.

IPlanet App Server 6.5 on Solaris Installation failed

During installation of Application Server 6.5 I got the following errors:
Error#1
Setting up Administration Server Instance...
ERROR: Ldap authentication failed (151:Unknown error.)
Error#2
ldap_simple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: raptor.mycompany.com.unixport
Port: 11024
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager >
Hostname figured out automagically by the iPlanet's setup script has fully qualified hostname followed by domainname somehow and I did not have a chance to fix it.
/etc/defaultdomain contains unixport
/etc/hosts has:
127.0.0.1 localhost
ipaddress raptor.mycompany.com raptor loghost
Applied all the patches recommended for Solaris8 per installation doc.
Installed iPlanet WebServer ( Enterprise ) 6.0SP4
Has anyone faced a similar problem with this server on Solaris 8?
Vamsi

Really I have the same problem with iAS6 SP4 under Solari 2.6.
I've got:
0. *****************ERROR: Register_NASA: One of these variables was not defined:
LDAP_Hostname [sirocco.uab.es] LDAP_ServerPort [391]
LDAP_RootDN [cn=Directory Manager ] LDAP_RootDNPwd []
... skipping LDAP registration ...
but I already have an installation with the SAME install.inf and userinput.log and it runs without problem. When I install it interactively I can't see this error msgs at all !!! but after all I can't connect like admin (I've got a msg "Cannot login....."
In my /etc/hosts I have all kind of names :-((
Oleg Mercader

Solaris installation related questions/problems

I've recently purchased Sun's Solaris 8 OE media kit 2/02.
I tried installing them on two computers and experienced the following problems:
On my Pentium 3, I get the following messages when during the first steps of installation:
Determining bus types and gathering hardware configuration data...
Warning:Resource Conflict - both devices are added
NON-ACPI device: PNP0C01
Memory: 9FC00-9FFFF, FFE0000-FFF7FFF,FFF8000-FFFFFFFF,
FFC0000-FFDFFFF,FFF00000-FFFFFFFF
ACPI device: PNP0C01
Memory: 9FC00-9FFFF,E0000-EFFFF,40FFC00-FFFFFFF
Warning: Resource Conflict - both devices are added
NON-ACPI device: ISY0050
Port: 3F0-3F5,3F7,IRQ:6;DMA:2
ACPI device: ISY0050
Port: 3F0-3F1,3F2-3F3,3F4-3F5;IRQ:6;6JDMA:2
Most surprisingly, the installation worked!!!
However, if anyone understands what the above means, its implications or other important information, I'd like to hear it and its workarounds if any.
On my newly purchased Pentium 4, I had to first remove my Ethernet card to prevent system boots during installation. My problem is that I have some hardware conflicts.
I have a "15 LCD monitor from LG.
Display adapters: ASUS vn179 DDR v28.32
GeForce 4 MX 440 64 MB BV17 Internal (MV)
I think that these two are causing the problem.
As a result, I cannot install Solaris with the windowing system.
I cannot see these types when choosing hardware devices.
Please advise on this matter.
I tried choosing some other hardware from the configuration list but the installation halted.
Am I doomed with this computer not having Solaris on it?
Last is a matter of Solaris residing on a single harddisk with other OS.
I want to have Solaris, Redhat Linux 7.3 and Windows XP Professional.
In what order should I install the OSs?
Is it recommended to make partitions before any of the above installations take place?
Which OS should go into each partition if it makes a difference?
P.S.
I'm a total newbie to Solaris and plan doing some Java programming on it.
So using a GUI is absolutely essential to me.

Hi TH,
You can install UPK server with WS 2008 R2 SP1 without any issues(may it be standard or enterprise edn.). Oracle database 11.2.0.4 can be used as well.
You can refer the installation guide for version 12.1 incase you have any queries.
You would only need to open the database port(eg 1527) or so on the subject server. There are no other specific port opening requirement on the firewall (port 80 must be open as well, but mostly it is not blocked on servers).
Let us know if you have any further queries or if you have any issues.
regards,
SD

Dell Laptop Solaris Installation

Hi
I have Dell Inspiron 8100 with P-III, 256 MB RAM.
I would like to install Solaris(Intel) 8 10/01on this.
When I run installation, after device check it gives an error: epb0: M II link not found. and when it asking to enter laguage option, it won't accept character or will accept some wrong characters instead of 1 (For English). I tried with another keyboard also.
Also I want to know what are the major problem I can faced particularly damaging PCMCIA card or TFT screen.

I am running into the same problem with my Solaris x86 installation. For some reason it is not recognizing my keyboard input once it gets to the language selection menu. I was wondering if you had received a workaround as of yet?
B

Solaris 8 installation

Similar Messages

Maybe you are looking for