Solaris 8 (Intel) install - graphics adaptor

This product seems to operate with a limited range of graphics cards.
I have a TX Pro motherboard with an SIS 6326 AGP graphics chip, and 8 Mbytes of on-board VGA memory. I can't install Solaris unless I can configure the display adaptor correctly, and it works with none of them.
As you can guess, I am trying to avoid buying a new card. SIS do not supply Solaris drivers.
Any suggestions ?

Have run into this problem on a tnt ultra2. Found that if I just accepted the default resolution during the install, it worked fine. After the install, I ran kdmconfig again, and had no problems changing the resolution.
Hope this helps.

Similar Messages

  • HT203254 Macbook pro 15. Intel HD Graphics 3000/ AMD Radeon HD 6490M. Screen seems 'solarized'/pixellated at startup. disappears after 30 minutes. Any idea of cause and cure?

    New Machine in Mar 2011. OS version 10.6.8
    All software updates installed via Automatic update.
    Screen has a 'solarized' look on start up, which disappears after about 30 mins, suggesting a 'warm up' issue?
    Am aware of Nvidia issues with Macbook pro but this machine has the following graphics/display on logic board.
    Does anyone have a view on this matter and a way of resolving it? Still under extended warranty.
      Chipset Model:          AMD Radeon HD 6490M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x8
      VRAM (Total):          256 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x6760
      Revision ID:          0x0000
      ROM Revision:          113-C0170H-521
      gMux Version:          1.9.23
      EFI Driver Version:          01.00.521
      Displays:
    Color LCD:
      Resolution:          1680 x 1050
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    Intel HD Graphics 3000:
      Chipset Model:          Intel HD Graphics 3000
      Type:          GPU
      Bus:          Built-In
      VRAM (Total):          384 MB
      Vendor:          Intel (0x8086)
      Device ID:          0x0116
      Revision ID:          0x0009
      gMux Version:          1.9.23

    You said the magic words:  Still under extended warranty.  Take it in for evaluation and repair.  That is not a normal situation.  The display should not have to 'warm up'.
    Ciao.

  • Intel i740 graphic card support in solaris 8

    -does anybody know if i can use the old intel i740 8mb graphic card
    on this solaris 8, because at the beginning of the instalation the
    boot manager does not recognize my graphic card, and i have to set
    a simple svga card support ....
    i am waiting for an answer soon ...... than you !!!

    Hi,
    I have searched through our databases and did find that there was
    considerable development of the Intel i740 Graphics Adapter driver.
    Unfortunately, this driver was never released for late 2.6 or 2.7
    and I cannot find any evidence of current driver development.
    There may be Third party drivers available currently from http://www.xig.com as I am aware that they do write drivers for this card.
    Regards
    Derek SUN-DTS

  • Is it Possible to install oracle 9i  32 bit on Sun Solaris Intel Edition

    Dear OTN Members ,
    It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
    Sun Solaris Intel Editon 2.8 . Please inform me on
    email :-
    [email protected]
    [email protected]
    Thanking You
    Piyush Patel
    - Server name :- pi.com
    - Filename
    - Date/Time
    - Browser + Version : Netscape 4.7
    - O/S + Version : Sun Solaris Intel Edition 2.8

    857211 wrote:
    I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
    Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
    http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
    http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
    However the Installation Guide for Database Client adds:
    "Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

  • Can you install 9i on Solaris Intel ?

    Can you install Oracle 9i on Solaris Intel ? 32 / 64 bit

    Hello dear people,
    I'm trying to install the 9i Database for Sun SPARC (32-bit) on an Intel machine with Solaris 8 running. I followed all steps of the installation documentation, but when I try to execute the runInstaller programm, I get always the following error:
    Syntax error at row 1: '(' unexpected.
    Can you tell me, which is actually the terminal Release for Intel Solaris? I were very pleased.
    Thanks,
    Reinaldo

  • Installing Oracle 8i in Solaris Intel Version With Pentium 4

    Hi Guys,
    I am trying to Install Oracle 8i under Solaris 8 Intel version with Pentium 4 processor fixed.But iam'nt able to continue after I click "Install" button,the runInstaller exited badly with no response.I was told that even Installing Oracle under Windows P4 is facing the same problem,but on searching I got solution by renaming a DDL file before starting installation.Is there any similar method to do for installing it under p4 processor on solaris intel 8 version.

    Dear Mr. Kumar, i am chandrasekaran from singapore, actualy i need your help regarding the intel sun os oracle. I have Intel Based SUN OS, but i try to get Oracle CD Any version either 8i or 9i for intel sun os.
    One of my friend have the cd but it already damaged so that i need your help.
    My address
    S.Chandrasekaran, Blk 84 #07-93, Commonwealth close, Singapore 140084. If you have the cd you make one copy for me and send by post. Thank you
    My email id: [email protected] or yahoo.com
    by chandran.s

  • Install Oracle on Solaris Intel

    I have purchased Oracle8i Enterprise Edition, Release 2(8.1.6) for Intel Unix(Solaris Intel), and have installed successfully. However, as soon as I shut down and reboot the machine, I can connect to sqlplus
    internal, but I cannot log into the database as "sys".
    The procedure I did is as following:
    Immediately after the installation (message says "installation successful"),
    1. Log in as user "oracle" in the Bourne shell.
    2. At the $ prompt, type "sqlplus internal"
    3. It come out with SQL prompt
    4. SQL> show user ( I typed show user under SQL prompt)
    5. Then it return "sys"
    Things seemed to work fine at that point.
    But, when I shut down and reboot the machine and logon again, and follow the same steps 1-5 as above, it did not work. When I did the "show user" command at SQL prompt, the user is not "sys", instead it returned
    " ". I followed the installation guide and tried to reinstall 5 times.
    Every time I had the same problem. I was wondering if this is a bug in
    the CD. How can I solve it?
    Thanks,
    Lillian

    Got past this spot... Thanks to the beefier shared memory/semaphore settings in this website (from another response in this forum)
    http://www.dbspecialists.com/4dbas/presos/oracle817solaris.html

  • Solaris 8 Intel install problems

    I'm a noob to this, I try to install the Solaris 8 Intel on AMD XP as second os (XP Pro 1st os) but failed. I get this error message:
    error: Configuration error - missing controller?
    The root file system is not mounted and the configuration assistant has exited prematurely.
    Booting is unlikely to succeed. CTRL-ALT-DEL may be used to reset the machine.
    Failover to boot interpreter - type ctrl-d to resume boot
    >
    I tried ctrl-d it didnt work like it said and give these error message:
    Cannot load drivers for
    (can't load the root filesystem)
    Please help, thank you

    Did you get any help with these problems? I am worried now beacuse my install files are nothing like these sizes. I unzipped a v1-a to 128 Kb.
    Did you find some isntructions? Could you forward them to me because I cannot find any. Thank you.
    Mike
    Hello,
    I'm trying to create the 3 iso files from the Solaris
    8 Intel download and am having
    a problem with the iso formed file sizes. Two of the
    iso files, the "install.iso"
    and "v1.iso" are larger than 700 meg. (which is the
    limit on my CDs) They are
    944 meg and 729 meg respectively.
    The sun intructions say to create the iso files from
    the zipped files I downloads after
    unzipping them. Well, combining 3 files each into
    each iso file for the CD image is
    creating these large iso images.
    Is this the right procedure?
    Also, do I even need the install.iso image as I see a
    lot of talk on the newsgroups
    about starting a fresh Solaris 8 install with CD 1
    ("v1.iso")?
    Thank you!
    - Steve

  • I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

  • Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics

    Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics and if i can where
    can i find a graphics card that will install in that computer.

    There are many MANY threads on this, the answer is that it's not worth your time since you have to have a replacement card that the HP system BIOS already likes,, and this is not the same as replacing anything in a desktop, this is the equivalent of replacing the graphics in a laptop.
    Since the graphics cards are not considered a user upgradable component there are no lists of "approved cards" nor guides to doing it, the closest you could do is the service or recycling disassembly sheets.

  • Intel 3000 Graphics driver from windows update failing to install. Error 800F0244

    Hi all, So an update has come through windows update for my embedded graphics which is an Intel HD 3000. Problem is the update keeps failing. Tried restarting and nothing changed. I ended up jumping on to the Windows Forums and seems like this problem has just started to pop up for quite alot of users and no solution yet. This is what the windows website says for the Error : SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH0x800F0244 The software was tested for compliance with Windows Logo requirements on a different version of Windows, and may not be compatible with this version. So was wondering if anyone else had this problem and if anyone found a solution?  

    Hi Everyone , So after a few minutes of digging around this is what I found. This is the driver version that is failing for intel HD 3000. ( 9.17.10.4229 )     So I thought I'd check the driver on the Intel site, to see if it was the latest, which it was .. (9.17.10.4229)    And this is the driver currently installed for my HD 3000... and as noted its  ( 9.17.10.4229 )   SO its seems this problm is a windows update issue and the most current driver is available through intels website. No need to stress, jump onto the intel downloads page and download the latest one if you havent already, This is a link to the  32Bit Driver https://downloadcenter.intel.com/download/24970/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit  Heres the link for the 64Bit https://downloadcenter.intel.com/download/24971/In​tel-HD-Graphics-Driver-for-Windows-7-8-64-bit As for the windows update one, hide that update as clearly something isnt right and surely MS will patch it soon enough! Hoped this helped   

  • Where is Intel Control Center install / where do I find the program for Intel HD Graphics options?

    Hello,
    I reinstalled the NVidia Quadro 2000M driver, which also reinstalled Intel HD graphics.  I did this because I was having problems opening up Photoshop 5 - not sure if I needed to do that, because the problem remained afterwards, but then magically, it works every time now.  So something fixed itself.
    Anyway, after it reinstalled Intel HD Graphics, the Intel Control Center button, which opens Intel HD Graphics options does not work.  I realize that the Intel Control Center is just a simple front-end with a couple of buttons, but how can I get it to work again?... I cannot find the install program.  Also, as an alternative, where is the executable to get to the Intel HD Graphics - and what is its name?
    Thanks!

    From the Finder, hold down the option key and click on the "Go" menu bar. You'll see your user Library listed there.
    Clinton

  • Problem installing Intel HD Graphics drivers on HP G62-234DX notebook for windows 10

    HI!I have a HP G62-234DX with intel HD Graphics with the processor Intel core i-3. the driver for my laptop is properly working well on windows 7, but aftering upgrading to windows 10, the driver on intel HD Graphics is not working well. I tried to search for the driver compatible for windows 10, but i could not find the driver from your website. the resolution of the graphics on windows 7 was 1360X738, but now the resolution is 1024X 768.So would you help me install the driver compatible with windows 10?Please help!    

    I think you have Intel 3000 video. Here is official word from Intel. It appears Intel 3000 is not supported: http://www.intel.com/support/graphics/sb/CS-034343.htm What is listed under display adapter in device manager?

  • Solaris 8 intel install problem

    When my Solaris 8 install gets to the spot where it asks for the language to use (0-9, english is 0, which I want), anything I hit on my keyboard sends bogus VT codes to the screen. Earlier in the install process (when it asks for solaris interactive vs custom for example), my keyboard works fine, I can choose 1 or 2 there.
    Has anyone else seen the problem? I've tried multiple keyboards, and they all do the same thing.

    Sounds like the dell keyboard problem:
    http://groups.yahoo.com/group/solarisonintel/message/20088
    Did you try an USB keyboard? That's supposed to work around
    this bug...

  • Standard vga graphics adaptor not working

    the standard vga graphics adaptor of my hp laptop is not working its saying code 10. its an hp pavilion dv6 model 6b60sa.. intel coreTM i3-2330M [email protected] 2.20GHz. 64 bit

    Hi:
    You need to install the graphics driver if you see a standard vga adapter listed.
    You should be seeing two adapters...Intel HD graphics and AMD Radeon HD 6490M .
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&dlc=en&lc=en...

Maybe you are looking for

  • JTree cell renderer: how to fill whole row?

    hi, i'm trying to make a tree cell renderer that renders at default height, but fills the horizontal width of the tree (e.g. with a JLabel with a custom background color). I'm working on the theory that in order to do this you need to change the pref

  • Edit an Uploaded PDF Within Website

    Hello, I'm looking for a solution to editing a client uploaded PDF, saving it, and passing it off for print.  Is there a module or plugin out there capable of giving a website more than simple read only functionality? My apologies for how vague this

  • Camcorder connection problem

    I connected my Sony DCR-HC21 mini DV tape camcorder to my MacBook Pro with a USB cable and iMovie does not recognize it. Nothing happens. How do I import? Do I need a different cable?

  • Creating XSD file for given XML

    Hi All, I have requirement to create XML Schema file (XSD) for any given XML. The minimum information that I want to include in the XSD is the dataType of the elemnt. I should be able to dpecify some DEFAULT data type so if I don't specify any data t

  • I can't update to iTunes 11.0.5

    I cannot update iTunes from 11.0.2.26  to 11.0.5