Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

Hi there
I am installin sloaris 8 in Pentium Pro Machine with Quantum Firball Hard
Disk 10 GB , at installation time the Solaris recognize the existance of the hard disk by givingme the option to load from CD ROm or the Quantum Hard disk but later on it gives me the following message
No Disks that meet the Criteria in the solaris installer documentation
Your help will be appreciated
Thanks

Hi
I am using IDE Controller not SCSI, the Hard disk is being partitioned using Dos FDISK , When i got this problem Solrais write this message after the error i mentioned before
Please Check the system or try another installation option
then it gives me Unix Prompt , I tried to use FDISK but could not get the right Disk name , I tried FDISK /drv/dsk/c0t0d0s0 or /drv/rdsk/c0t0d0s0
but no way , I am new to Unix any way , I tried to get the disk name through df,sysdef,prtconf but could not as well , I guess may be the solaris partition is the problem ? may be if i could creat a solaris partition it will solve it ? , I am using the full version of solaris 8 not the beta one.
Thanks for your help
Roushdy

Similar Messages

No Disks that meet the citeria in the Solaris installer documentation found. Please check the system or try another installation option #

I'm tring to install this on an IBM netfinity 5100 server which has ultra 160 scsi drives.I get this message
"No Disks that meet the citeria in the Solaris installer documentation found. Please check the system or try another installation option #"
Please help me. I new to UNIX and SOLARIS.Thanks!
VC

You are probably using the INSTALL CD that comes with Solaris x86.
Don't use it but use the Software CD 1/1 to boot and install the system instead. The INSTALL CD is supposed to be used on a completely blank system (no other OS's) although even there I think Software CD 1/1 does the job.
Also, if you are new to Solaris I advice you to get the FAQ (you can find it on e.g. http://www.science.uva.nl/pub/solaris/solaris2- it should be really helpfull during the first few weeks/months on Solaris

HT201364 I have a MacBook Pro 17" that meets all criteria on this list but it still won't let me upgrade... Help.

I have a MacBook Pro 17" that meets all criteria on this list but it still won't let me upgrade... Help.
To install Mavericks, you need one of these Macs:
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later) **** Maybe my MacBook Pro is early 2007 ? How do I find that out? ****
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed ***YES
2 GB or more of memory ***YES
8 GB or more of available space ***YES
Last Modified: Nov 6, 2013

Then your model cannot upgrade to Mountain Lion or Mavericks. That is why you could not download it. You can upgrade to Lion, however.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

"the feature you are trying to use is on a RD-ROM or ohter removable disk that is not available insert the 'itunes' disk and click OK

I've beeing having problems with Itunes since about january, wheneveer i click on itunes the error message reads "The file 'ituneslibrary.itl' cannot be opened because it was created by a newer version on of itunes", yet when i try to updat to itunes 11 or uninstall itunes from my computer i keep on getting a message stating "the feature you are trying to use is on a RD-ROM or ohter removable disk that is not available insert the 'itunes' disk and click OK" what is the best way to fix this problem?

yet when i try to updat to itunes 11 or uninstall itunes from my computer i keep on getting a message stating "the feature you are trying to use is on a RD-ROM or ohter removable disk that is not available insert the 'itunes' disk and click OK"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How to add a character at the end of an array element that meets certain criteria.

Hi. I am using CF 9.2.1. I started learning CF yesterday, and I am trying to figure out a way to add a special character (like "?", "!"," & ") to an array row if the first row element (say, element [1][1]) has a specific letter like " t" in the word it is holding. In this case the special character will be added at the end of the last row element (element [1][3]).
Example: The take columns are: "Firstname", "Lastname", "Age". If Firstname contains an "s" or "S" (in any order) then add "!" at the end of the row so that :
Sam, Rubins, 26 !
Nick, Palo, 32
Robert, Williams, 28
Oscar, Ramirez, 23 !
I tried using the ReReplace, Refind and the #findoneof functions. I could probably loop through the array and return a value and store, while storing the value in a separate variable and using an if/Boolean function to compare that value and so on.... But I am sure there's an easier and more efficient way. Thanks in advance.

<cfset CityInfo = QueryNew("City, State, LCode","VarChar, VarChar, Integer")>
<cfset newRow = QueryAddRow(CityInfo, 2)>
<cfset newRow = QueryAddRow(CityInfo, 3)>
<cfset newRow = QueryAddRow(CityInfo, 4)>
<cfset newRow = QueryAddRow(CityInfo, 5)>
<cfset newRow = QueryAddRow(CityInfo, 6)>

<cfset temp = QuerySetCell(CityInfo, "City", "Dallas", 1)>
<cfset temp = QuerySetCell(CityInfo, "State", "TX", 1)>
<cfset temp = QuerySetCell(CityInfo, "LCode", "214", 1)>
<cfset temp = QuerySetCell(CityInfo, "City", "Fort Worth", 2)>
<cfset temp = QuerySetCell(CityInfo, "State", "TX", 2)>
<cfset temp = QuerySetCell(CityInfo, "LCode", "817", 2)>
<cfset temp = QuerySetCell(CityInfo, "City", "San Antonio", 3)>
<cfset temp = QuerySetCell(CityInfo, "State", "TX", 3)>
<cfset temp = QuerySetCell(CityInfo, "LCode", "210", 3)>
<cfset temp = QuerySetCell(CityInfo, "City", "L.A.", 4)>
<cfset temp = QuerySetCell(CityInfo, "State", "CA", 4)>
<cfset temp = QuerySetCell(CityInfo, "LCode", "213", 4)>
<cfset temp = QuerySetCell(CityInfo, "City", "Austin", 5)>
<cfset temp = QuerySetCell(CityInfo, "State", "TX", 5)>
<cfset temp = QuerySetCell(CityInfo, "LCode", "512", 5)>
<h4> Number1. City info TABLE contents:</h4>
<cfoutput query = "CityInfo">
#City# #State# #LCode#<br>
</cfoutput>

<cfset cityarray=arraynew(2)>

<cfloop query="CityInfo">
<cfset cityarray[CurrentRow][1]=City>
<cfset cityarray[CurrentRow][2]=State>
<cfset cityarray[CurrentRow][3]=LCode>
</cfloop>
<h4>Number2. City info ARRAY contents before appending:</h4>
<cfloop index="Counter" from=1 to=5>
<cfoutput>
City: #cityarray[Counter][1]#,
Estate: #cityarray[Counter][2]#,
Code: #cityarray[Counter][3]#<br>
</cfoutput>
</cfloop>

<cfset cityarray[6][1] = "Irving" />
<cfset cityarray[6][2] = "Texas" />
<cfset cityarray[6][3] = "972" />
<cfset cityarray[4][1] = "Los Angeles" />
<h4>Number3. City info Array contents after adding Irving, TX and updating L.A.:</h4>
<cfloop index="Counter" from=1 to=6>
<cfoutput>
City: #cityarray[Counter][1]#,
Estate: #cityarray[Counter][2]#,
Code: #cityarray[Counter][3]#<br>
</cfoutput>
</cfloop>
<br>

<h4>Number4. City info after searching for "s"</h4>
<cfloop index="Counter" from=1 to=6>
<cfoutput>
City: #cityarray[Counter][1]#,
Estate: #cityarray[Counter][2]#,
Code: #cityarray[Counter][3]#,

#findoneof("sS",cityarray[Counter][1])#
<br>
</cfoutput>
</cfloop>

It is much simpler than you think. Additions and modifications are in italics. Good luck!
<h4>Number2. City info ARRAY contents before appending:</h4>
<cfloop index="Counter" from="1" to="#CityInfo.recordcount#">
<cfoutput>
City: #cityarray[Counter][1]#,
State: #cityarray[Counter][2]#,
Code: #cityarray[Counter][3]#<br>
</cfoutput>
</cfloop>

<cfset cityarray[6][1] = "Irving" />
<cfset cityarray[6][2] = "Texas" />
<cfset cityarray[6][3] = "972" />
<cfset cityarray[4][1] = "Los Angeles" />
<h4>Number3. City info Array contents after adding Irving, TX and updating L.A.:</h4>
<cfloop index="Counter" from="1" to="#arrayLen(cityarray)#">
<cfoutput>
City: #cityarray[Counter][1]#,
State: #cityarray[Counter][2]#,
Code: #cityarray[Counter][3]#<br>
</cfoutput>
</cfloop>
<br>

<h4>Number4. City info after searching for "s"</h4>
<cfloop index="Counter" from="1" to="#arrayLen(cityarray)#">
    <cfset sPosition=findNoCase("s",cityarray[Counter][1])>
    <cfoutput>
    City: #cityarray[Counter][1]#,
State: #cityarray[Counter][2]#,
    Code: #cityarray[Counter][3]#
    </cfoutput>
   <cfif sPosition GT 0>
    <cfelse> 
    (no 's')
    </cfif>
    <br>
</cfloop>

ADF-BC JSF Counting the number of displayed rows that meet certain criteria

Hi everyone.
I have a JSF page that displays a table containing rows with a type attribute that may be either 'A' or 'B'. The page uses an executeWithParams form in order to set query parameters and execute the query. My users have asked me to display percentage information for type A rows at the same page.
One way to do this would be to create an application module method that would parametrize the query, execute it, iterate through the results, do the calculation and return everything in a formatted string.. Somehow this approach does not seem right.
Is there a best practice regarding situations like this? Any reference to code example would be perfect.
Thanassis

Maybe you can use the getEstimatedRowCount() method on the view.
See more info here:
http://download.oracle.com/docs/html/B25947_01/bcquerying006.htm

Record count that meet certain criteria in query

Dear all,
I need to calculate number of customers that bought particular material in certain period, how can I do so?
e.g.
Cube Data
SO__CalMonth___Customer_____Material
1____2008.01____Customer A___ Material A
2____2008.01____Customer B___ Material B
3____2008.01____Customer A___ Material A
4____2008.01____Customer C___ Material A
Expected Query Result:
CalMonth__Material_____Customer Count
2008.01___ Material A___2
2008.01___ Material B___1
2008.01___ Material C___1
Since SO 1, 3, 4 all sell Material A, but only 2 customers (A & C) are involved, so the result is 2.
Since SO 2 sell Material B, and it involve only 1 customer B, so the result is 1
Please help!!
Points will be assigned for helpful answers.
Thank you.
Best regards,
Chris

Dear Pavan,
Can you further elaborate the formula you mentioned?
Source Data;
SO__CalMonth___Customer_____Material
1____2008.01____Customer A___ Material A
2____2008.01____Customer B___ Material B
3____2008.01____Customer A___ Material A
4____2008.01____Customer C___ Material A
According to what you suggest,
"Drag date char,material and customer into rows and hide customer char."
It will result in
CalMonth__Material_____Customer
2008.01___ Material A________A
2008.01___ Material A________C
2008.01___ Material B________B
But I want to merge the first 2 Material A into one row, without showing the customer. I just need to count only.
Please advise. Thank you.
Best regards,
Chris

Can't do factory restore & only disks that keep ejecting are the osx install and apps disks

First of all let me say, this is my first Apple computer and I'm not experienced in forums. Please do not read rudeness into what is actually frustration at searching forever for a solution and trying not to wish I had been talked into an Apple. With that said....
I've had my iMac for about a year and a half. We had lost our internet and were using a hotspot for awhile so we could look for another provider and get online if we needed to. One day I signed on and, we didn't have an isp mind you, but the browser opened up to the dominant isp in this area saying a virus was detected coming from this iMac address? I thought that was strange and panicked so decided to do what I would on a pc, just restore the whole thing to factory settings. Everything was going smooth, (my updates were at 10.6.8 at the time)... when I restored I was back at 10.6.2. (osx disk) I was doing systems updates and one apparently hung.... when told to restart, I did... but the computer would never boot back up. It would turn on.... go to gray screen... then blue screen... then shut off. I couldn't boot in safe mode, pram reset did nothing, smc reset did nothing, couldn't hold 'd' to get to diagnostics, couldn't boot to recovery... it kept spitting out disks after trying to read them... with all those solutions I found online and nothing helping I had to call Apple... they couldn't help over the phone because Apple Care expired, unless I purchased help... this frustrated me because every where I found my problem and a different solution their Apple Care had expired too.... so had to set an appt at an Apple store.
So took it in to Apple, just got it back yesterday. I let them know I was restoring to factory settings so wasn't worried about losing anything. When I picked it up, I was told no charge... it was a software issue they saw where it hung and fixed it. I tried to ask questions about the 'software repair' but they didn't seem to want to answer my questions. It just says 'software repair' on my order. So I asked 'okay, so it's back to factory settings like when I bought it?' I was told yes and I said great that was my goal anyway. I get home and it's NOT like when I first purchased it or like a factory restore. Everything I was doing before it crashed is on there. So I'm back to trying to do a factory restore. But for some reason now, it seems the only disks that keep self ejecting are the osx install and application disks. I still can't do a boot recovery, AHT, or 'c' boot... since the apple disks eject I can't use start up to get to them.
I find it odd that both the oxc install disk and applications disk would be damaged at the same time when they both previously worked. I called the Apple Store where I took it to talk to the geniuses that worked on it because I had a question about the repair they did....
Apple: I'm sorry we don't offer tech support
Me: I understand but I had a question about the repair done from there the other day
Apple: We are just a store and can't answer tech questions
Me: I understand and get that but since I took my mac to your store to be worked on I thought I could ask the person that worked on it a question about the 'software repair' and meaning and what software was repaired
Apple: No you will have to set another apt to bring your computer in if you are still having problems
Me: UGHHHHHH (pulling hair out)
So (a little late huh?) to make a long story short giving what I stated above:
Why is it, only the osx install and application disks not working now? They worked before taking it to Apple
What can I do at this point?
Can you do a factory restore without disks on a Mac?
If by chance both disk did for some reason go out, how do I get them replaced?
If I gave TMI without enough important info let me know.
My OS X install disk says version 10.6.2 on it
About this Mac currently says Mac OS X version 10.6.8
Batteries died on keyboard and mouse so am using usb wired keyboard and mouse
At some point I had used bootcamp and then later found parallels so I could install a Corel product and keep using... could some windows files be messing something up in there somewhere?
It used to say Mac OS X Version 10.6.8 and I could have sworn I saw it said 'snow leopard' in there somewhere, now I can't even find that word in search on the computer. Long post I know but trying to set what was going on at the time I took it in.
I'm not sure what else needs to be added to get this to the correct thread or help. As I stated my goal is to have it like I just pulled it out of the box for the first time so no solution will scare me off about loss of data.
Thanks for any help.

Wow, sorry to hear of your experience. Seems strange that your disk would just eject like they did. It could be a lot of things but more than likely you just kind of have to start all over.
What I would do is insert your system disk and instead of going immediately to an install I would go to disk utility and erase the drive. That will erase everything on the disk and give you a new blank disk to start with. After that I would try to reinstall the system. Assuming that goes well then you should be restored to where it was when you purchased it. After that you can reinstall all your applications or personal files. I hope you have good backups.
I remember one time I was having a similar problem and don't ask my why I did it but I actually could not get it to install a system. I removed both of my ram sticks, shut the computer down for about 10 minutes including unplugging it from the wall plug, then reinstalled the ram, plugged it back in and started up from the system disk and all worked just fine. To this day I have no idea if pulling the ram helped but I have never had to do it since and for some dumb reason that solved the problem I was having, which is the same problem you are having now. Call it voodoo but it worked.
Good Luck!!
Message was edited by: Al Van Malsen

The default disk that itunes saves videos onto is full. How can I set the default to the other disk I have installed?

When adding a video onto iTunes I get the error message that my disk is full. I am aware of this. I have another disk(Actually same disk but it's split into two parts under computer). It has plenty of space(629 GB free). How do I set the disk that itunes downloads onto as the second disk?

Hi o0OZACO0o,
Thanks for visiting Apple Support Communities.
If you have iTunes set to organize your files, you'd need to make the other drive the default location of your iTunes library. See these articles for more information:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Best Regards,
Jeremy

How do I know if a login site is secure? In Safari or Explorer there is a visual lock icon, but not so in Firefox. Is there an add-on that meets this need?

How do I know if a login site is secure? In Safari or Explorer there is a visual lock icon in the web browser window, but not so in Firefox. Is there an add-on that meets this need?

The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server. So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL. The functionality of the padlock has been replaced by the Site Identity Button on the left end of the location (address) bar.
https://support.mozilla.com/en-US/kb/Site+Identity+Button
http://www.mozilla.com/en-US/firefox/security/identity/
This has actually existed since Firefox 3.0
If you still want a padlock icon also then there is this Extension.
https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/

On the interactive form - the filter icon

I have a user that has a dumb question, they want to the filter to go away they selected when they come back to the first page of the interactive form, when there is no data left.
Of course all they have to do is click the x to make the filter list appear. The reason it says no data when you go back to the first form is that that records no longer meets the criteria for the filter. The user wants the filter with the green check and the red x to disapear if there is no data left for that filter.
Hope this makes sense.

Hi -
Two things you might want to look at are:
1) To reset an interactive report in a link, use the string "RIR" in the Clear-Cache section of a URL. This is equivalent to the end user choosing the Reset option from the interactive report actions menu on the target page. The report is returned to the default report settings specified by the developer.
or
2) You can reset a report with a js call also: javascript:gReport.reset()
Good luck.

Can I change the screen saver on my apple tv? or change the display to the awesome equalizer while i stream my music?

I am trying to find a way to change the screen saver for my apple tv while I stream my music. Anyone have a solution? Besides my photos, can i show the awesome equilizer? Or can I show the album artwork screensaver that the macs have? I feel like this feature is much needed on the Apple TV while I stream my music to the Apple TV 2nd generation!

Hi byee322!
If you are using devices that meets these criteria:
iPhone 4S (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)1
Apple TV (2nd or 3rd generation)2
Wi-Fi (802.11a/g/n) network
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
you may want to try using a feature called Airplay Mirroring to show whatever you'd like on the screen while your music is playing. We have a couple of articles about that online that can tell you more information about Airplay Mirroring. The first one here is about using Mountain Lion to mirror the display from your Mac onto the TV to which the Apple TV is connected, and can be found here:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
The second is an article with more information about Airplay Mirroring in iOS, and can be found here:
iOS: How to use AirPlay Mirroring
http://support.apple.com/kb/ht5209
Thanks for using the Apple Support Communities!
Cheers,
Braden

Job scheduling(passing the values to the child program)

when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
But the values of the parent program are not being passed to the child program what may be the cause for it?

rathan,
Why con't you use
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
These options have the following effects:
VIA SELECTION-SCREEN
The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
USING SELECTION-SET <var>
This option tells the system to start the called program with the variant <var>.
WITH <sel> <criterion>
Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
<op> <f> [SIGN <s>], for single value selection
If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
[NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
<f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
IN <seltab>, transferring a selection table
This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
WITH FREE SELECTION <freesel>, user dialog for dynamic selections
To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
WITH SELECTION-TABLE <rspar>, dynamic transfer of values
You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
SELNAME (type C, length 8) for the name of the selection criterion or parameter
KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.
Pls. reward if useful...

Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords. More than one account downloaded from older Laptop. Now the computer has the turning wheel in from of gray screen and won't go any further when

I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se. I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc. Can't keep them straight even though I write everything down. The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black. When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that. Then I held the on button in the back until the screen went black again.
What should I do? Is there a way to combine all my accounts into one account with one Apple ID? I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them.
In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
Very confused. Any Ideas about how I can get the computer to start up again and show a new screen?
Thanks to anyone who has workable suggestions.

If you really believe that your system has been compromised, here's what you do:
Disconnect your Mac from your cable modem;
Back up any documents on your system that are important to you;
Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
Choose a language and click the arrow button to continue;
From the Utilities menu, choose Disk Utility;
In Disk Utility, select your computer's hard drive;
Click the "Erase" tab;
Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
Click the "Erase" button and allow it to process;
Once the "erase process has completed (it will take a while), reinstall Mac OS X.
Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
Regards.

Reformatted disk but nothing appears in Mac OS X Installer

Hello,
Please help. I am stuck in a situation where I have erased the disk on my iBook G3 but the Mac OS 10.2 Installer doesn't recognize any destination disk or volume on the iBook so I can't reinstall the Mac OS.
Background: I formerly had Mac OS 10.3.9 installed on my iBook, which worked fine for many months. I then began having repeated startup issues that neither Disk Utility, Norton Disk Doctor, nor Disk Warrior could fully fix. The startup screen either had flashing folder/question mark, or Apple logo with spinning gear wheel that never stopped, or circle with line through it. Sometimes I would get thrown into the Unix command line window.
After all suggested solutions failed I tried re-installing Panther from the update CDs but it wouldn't work because it couldn't find an earlier version of the Mac OS on the destination disk. I then tried an Archive and Install with the original Jaguar CDs that came with the iBook. This didn't work and I still had a startup screen showing an Apple logo with spinning gear wheel that never stops.
I then did a backup of all my important data by starting up in Classic (somehow that still worked) and copying the data over a wireless network to my desktop G3.
I then started up the iBook with the Jaguar CD and used the DU on the CD to erase the iBook hard drive and tried to install a new copy of Jaguar but when the Installer gets to the Select Destination Disk screen there are no disks to select from.
I have tried running DU numerous times to repair the Disk but it reports "Underlying task reported failure on exit (-9972)"
Please help.
Thanks,
Bob

Deb,
Thank you very much for jumping in to help me. So far things have not gone well but I'm still trying.
To answer your question first, I don't (or didn't) have any partitions on the iBook. Before I erased the disk I was able to access Classic by starting up with the Mac 9.2.1 install disk and then selecting Mac 9.2.2 (Classic) from the startup contol panel.However, I am able to run the WipeInfo, Disk Warrior and DU from their respective bootable CDs.
I ran the cycle you suggested multiple times and found that WipeInfo didn't do anything, but eventually multiple reformatting with DU and multiple times with DW brought me to a clean disk that could be seen by the 10.2 Installer. The installer ran for over an hour and it seemed that everything was being installed from Disk 1 and then almost at the end of the progress bar the Installer quit with a message about not being able to finish the installation.
So I tried again but found the disk was once again not recognized by the Installer. so I did more erasing/reformating, running disk repair on DU, and trying to build a new directory with DW. At first I kept getting the message in DW "unexpected error while writing the replacement directory" and it would say I neded to try again. With DU I got messages about "invalid B-tree node size, catalog fiile entry not found for extent, keys out of order", etc etc..-- all different errors at different trys
Somehow by going back and forth between DU and DW I finally got a clean disk recognized by the Installer and tried again. This time the Installer completed the Installation and said Mac OS successfully installed. But then it automatically rebooted and booted up with the Disk 1 install screen again. I never had a prompt to insert Disk 2. When I ejected the Disk 1 install CD and tried to reboot the machine it went back to the flashing folder/question mark screen.
I was ready to give up but tried the cycle once again. At first the errors seemed really scary-- neither DU or DW could even read the disk - but after multiple reformatting, repair, and rebuilding I seem to have a disk that can be seen by the Installer on the Select Destination screen.
I haven't tried another Installation attempt because I wanted to first get your advice. Shouldn't the computer be giving me a prompt to insert Disk 2 of 3 at some point? What option should I choose for the installation? Should it be "install Mac OS X for the first time"? Do I need to partition the iBook with an 8 GB partition? The iBook was never partitioned before but maybe a re-installation requires a partition? don't know.
Is all this just a sign that my hard drive is totally toast? Funny thing is that I also ran the Apple Hardware Test CD that came with the iBook and my machine passes all the hardware tests, including mass storage.
Thanks,
Bob

Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

Similar Messages

Maybe you are looking for