Solaris 8 on Intel and apps for Sparc

I have installed Solaris 8 on PC wit Intel processor
but when i tried to run applications compiled for Solaris 2.6 for Sparc or Ultrasparc
they did not start .
Is there any way to start applications compiled for Solaris - Spark
under Solaris for Intel ?
And how if possible ?
Or the problem is elsewhere ?
Thanks

No way. Different CPU architecture, you must
recompile the applications from source to intel
binary code.
(Exception: shell scripts and other interpreted
languages, including byte code interpreters ("java"),
run on different solaris architectures without
recompiling)

Similar Messages

  • Is Solaris 9 Intel mature enough for serious usage?

    Hello everyone,
    I'm a Solaris newbie. I downloaded Solaris 8 Intel and installed a few times with and without success since Sun first released version 8 for free download. I had sucessfully installed Solaris 8 on Compaq Proliant Server and IBM Intel Xseries (with bad video) but failed on Dell PowerEdge (due to the lack of RAID and SCSI dirver or I didn't know where to get the drivers my hardware.
    The reason I posed the question is that the System Requirement Note states the Solaris 9 x86 OE Customer Early Access software is not suitable for deployment on any production systems.
    Is the current release of version 9 stable or final release? I'd rather not waste my bandwidth, time (It'd take me 3 days to download 3 iso images), CDs for beta releases.
    Please advise me.
    Thanks.
    Trent

    Depends on what you mean by "serious usage". Like right now, it provides a electronic place for me to dump my school work to instead of bringing disks or blank CDs.
    Overall, it's an alright system. Though, Solaris 9 was a little more difficult to set up on my old computer (probably more because of the computer itself rather than the software.)
    But, I did it. Installed Solaris 9 on 32 MB of RAM on a Pentium MMX 166.

  • What are the available software and apps for ipod nano

    what are the available software and apps for ipod nano

    saif78 wrote:
    what are the available software and apps for ipod nano
    Sorry, but Apps are not compatible with the iPod and there is no additional software available for it.
    B-rock

  • When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching.  Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod too.  Can I move these back?

    When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching.  Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod touch too.  Can I move these back?

    weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
    how weird is that?
    oh well JG - maybe you mixed a magic potion for me?
    anyway, thank you for all the help.
    to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
    cheers
    P

  • Solaris 8 (Intel) and Voodoo Banshee

    Hi all,
    I need install the Solaris 8 operation system in a INTeL machine and it has this kind of video card. Please, there is a driver for this video card?
    I downloaded the Solari's HCL and I could not see this card in the Capatibility List. If someone have some way to do this, please send me a email or the driver.
    Thanks in advance,
    Marcelo Muzilli ([email protected])

    Hi,
    Not sure about Windows 95.
    But yes, I have done dual boot with Windows 98 and Solaris 8.
    I installed Solaris 8 first, used only 50% of disk for Solaris and then installed Windows 98.
    May be somebody else in forum can share their experience with Win95.
    Thanks
    Kalpesh

  • What are the best games and apps for nokia X2-01.

    can nokia X2-01 support the angry birds game,which other games and apps are cool for this phone.where can i download them.dont tell me of nokia store,it doesnt have any intresting apps and games.thanks.
    Solved!
    Go to Solution.

    no it cannot support the Angry Birds franchise, because simply the hardware is too old and weak. Apart from Nokia Store, Google is your only bet for apps and games, there is nothing else that can be done about this mate.

  • Is there and app for receiving credit card payments?

    so i could type in the CC # and doesn't need the actual card?

    BAR files are apps you can install (side load) to your BB10 device. BAR files are converted (usually by others) from those native to Android and iOS.
    DDPB is a PC app that can be used to perform the side-loading process of the BAR file app to your BB10 device.
    So, if someone somewhere (you must search the Internet) has created already a BAR file for this Cielo app you want (which you say already exists for Android and iOS), then you can download that BAR file to your PC, install DDPB to your PC, and then use DDPB to install the app (using the BAR file) to your BB10 device.
    The process is called side loading. If a developer has not written their app for BB10, then you can still side load it if the above conditions are met (someone has created a BAR file already for the app).
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unifying web apps, modules and apps for better discoverability

    Hi guys,
    With the rise of open platform apps, and the growth of the developer ecosystem, we are facing a few challenges impacting user experience and apps visibility. The main ones that we see are:
    Increase the app market place visibility inside the BC admin console
    Reduce the confusion among beginners and SBOs generated by the two very similar concepts (web apps & modules) to which add a third one (open admin apps)
    Reduce the barriers in front of partners looking for additional functionally so that we increase apps sales to the app developer’s benefit
    One way we’re looking to solve this is to unify the Module & Web Apps entries into a single one called Apps, to which we’ll also add the open admin apps. From this Apps top level entry, partners will be able to see the list of apps (on the long run, the current BC modules will also become apps), add a web app  and browse the app market to purchase and install custom apps.
    The main benefit of this approach will be a really fast and easy discovery of apps and the app market, which will make it easier for new partners to understand the concepts and also drive more apps sales. The downsides (cause this is not a perfect solution) are that those of you who have built training videos need to reshoot some of the, to take this menu change into consideration and the mix of the custom app with web apps.
    What do think about that, or what would you suggest us to do to provide better apps visibility and discoverability.
    Regards,
    Cristinel

    Hi Christenel,
    I understand what you are trying to do and I think it's a good initiative, but I partiall agree with Liam. The Modules and Webapps should remain where they are.
    1. Modules are each an indiviual type of functionality that work in a very specific way. They cannot be changed and are core features of the BC system to meet a very confined function.
    2. Webapps are a piece of functionality that also work in a very specific way however, they can be modified to meet a specific need within a set of confined boundries. Simlar to modules they cannot be modified outside their acutal scope. The UX is generic and cannot be customised hence it sits in the middle of a Module and an App but they can be built of the fly. From an non-developer partner, this is a very important difference.
    3. Apps ( or what ever they are called) site outside the the scope or boundries of Modules and Webapps and can be complety tailored to meet a specific need as well as being an extension BC capabilities. They don't necessary have to rely on BC functionality.
    I can create an App that is in-fact a Webapp, or an App that is a completely independant of BC functionality, or re-write an entire module or existing piece of functionality (like an ecommerce app or a News Module).
    With the App Marketplace you are not only going to have a variety of products meeting different business needs, but also work and be styled completly different to each other as no UX can be the same without some sort of overlying UI framework. This will become very confusing when the experience in BC become's a hap-hazard collection of different UI's and UX's.
    I have to think more about this by my proposal would be to keep things the way they are but have an App Market Place where you can browse download Apps and install them to the specific area like a module, webapp, ecommerce, CRM etc. BUT the UI needs to be consistent.
    The core modules of BC is what's used in any CMS. What I would love to see is BC release the Events Module for example, which I can download, customised to suit my needs and replace the current module with the additional features that I want or have been asking for over the past several years. Like adding an event end date with my own custom tag that I can add it for the additional fields. While still keeping the core functionality like list views, and tags.
    My last point is that my understanding is that BC was not going to get involved with an App Marketplace? Has this position changed? and how does this affect Brent's works?

  • ICloud backup storage keeps popping up and I've delete a lot of data and apps for it to have more space, but it keeps popping up and deleting things doesn't work, how do I fix this?

    I've been trying to delete things to make room for more storage but nothing is happening, it keeps saying that iCloud won't backup because there is too much storage. I only have a few apps and I've deleted things I don't use, but nothin is working. How do I fix this?

    http://support.apple.com/kb/ht4847

  • Itunes is now "my music" and apps for tv news have no sound, is my itunes out of date? My last sync updated my os to 5

    I sync'd to upgrade and now iitunes is " my music" and I can not turn on any sound when playing video from tv network apps.  I tried twice to re-install the app without sucess.  Some panels recommend tapping the " mute" button on itunes, but my ipad no longer has that option (all music formerly in itunes is still there, but re-arranged in different format). My sync is to a laptop running windows xp, but my video is apples version of player.

    You play your music in the Music App in iOS 5. See if this helps with the app sounds.
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How to configure an X86 Solaris 10 laptop as Jumpstarter for SPARC T1000?

    I believe that I have taken due diligence WRT using search and Google to research the topic. There is a little voice that says "hopefully you haven't and the answer is right there in front of you".
    That being said, I did find an article for [configuring an X86 box to jumpstart another X86 box|http://www.sun.com/bigadmin/features/articles/jumpstart_x86_x64.jsp]. As many of you well know the T1000 is lacking a keyboard and monitor port so I'm forced to jumpstart the server. I received conflicting information whether I can jumpstart a T1000 (SPARC) box with an X86. My intuition says that this can be done, but may need modifications to the process in the hyperlink.
    Before trekking forward, {color:#0000ff}+I'd like to hear from you if you have jumpstarted a SPARC box with an X86 box.+{color} Ideally there would be a [link to a wiki, (much like this broken link I found on Google).|http://www.ignorantinc.com/www/ignorantwiki/index.php/Solaris_Wiki:Procedures/jumpstart] *+{color:#0000ff}Any procedures or lessons learned would be greatly appreciated{color}+*. Thank you for taking the time to this posting.

    There should not be a reason it doesn't work the support is there for both sparc and x86 support.
    What steps have you taken and what part is not working ?
    The basic high level steps for a network boot are just
    to create the image
    cd /os_image/Solaris_xx/Tools
    ./setup_install_server /somepath
    set the client up
    cd /somepath/Solaris_xx/Tools
    ./add_install_client client sun4v
    on the client
    ok  boot netAnyway just need some more details around where you are seeing the problem, what you have done etc.

  • Optimized software and apps for Mac Pro 2013 ?

    Hi
    I'm wondering which apps have been optimised for the Mac Pro ?
    The ones I was able to find so far:
    Final Cut X
    Compressor
    Motion
    Logic
    Aperture
    here: http://appleinsider.com/articles/13/10/23/updates-to-aperture-final-cut-pro-will -tap-into-horsepower-of-new-mac-pro and here : http://www.idownloadblog.com/2013/12/19/final-cut-pro-compressor-motion-mac-pro- 4k-update/
    Pixelmator (here: http://www.pixelmator.com/blog/2014/01/23/pixelmator-3-1-marble-fully-optimized- for-new-mac-pro/)
    Any other you can think of ?

    If what you say is true, then it would be a question of hardware support capabilities in Win 7, not a near-sighted policy. In any event, these are user forums. You aren't speaking to Apple, so I suggest you speak to Apple. Don't complain here. It's inappropriate and violates the Terms of Use.

  • Can I find games and apps for my Nano 5th generation?

    I have had my iPod Nano for quite some time now (I'm almost certain it's a 5th generation), and I have gotten bored with the games I put on it when I first got it. Are there still any games or apps around that I can put on my iPod?

    No.
    (111876)

  • Best game and apps for tungsten

    Hello all, and I just moved back in time..... so I was told.  But I love the palm pilot.... I had my iiixe for years until it met up with the washing machine... and now i just got a tungsten.  Hope it will live half as long as the other one....
    So looking to update this one with some apps.. and cant find much.
    Can someone point me in the right direction.
    Thanks
    Jeff
    Post relates to: Tungsten T2

    no it cannot support the Angry Birds franchise, because simply the hardware is too old and weak. Apart from Nokia Store, Google is your only bet for apps and games, there is nothing else that can be done about this mate.

  • Playlists and apps for newly reformatted computer

    I recently reformatted my Macbook Pro and did a clean install of Leopard 10.5.6. I backed up the machine using Time Machine. iTunes is working and I reimported all of my music and copied the apps folder for my iPhone. I just need to know where the file for my playlists is?
    Also, when I resync my iPhone am I going to lose all of the saved data for my games and everything? I obviously don't want this to happen.
    My contacts, calendar, and email are in sync via mobile me.
    Thanks!

    *I just need to know where the file for my playlists is?*
    Playlists are part of the data set contain in your iTunes Library database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?

Maybe you are looking for