Solaris 8 on Intel STL2 server board - installation problem

Hi,
I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
Booting kernel/unix...
SunOS Release 5.8 Version...
then reboots after 2 seconds.
Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
Finally, I found the very strange specification update info of STL2 board, published by Intel:
"13. Sun* Solaris* 8 installation issues
PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
I would appreciate any help. Thanks.
Matt

The problem has been resolved.
I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
Matt

Similar Messages

Problem booting Solaris 10 on ProLiant server after installation.

Hi all!
I have a brand new HP ProLiant DL360 G5 server. It contains 6 internal
hard drives. RAID 5 is configured on these drives using built-in HP
Smart Array P400i controller. I've just installed Solaris 10 8/07 on this
server. Solaris requires a driver for P400i controller. I'm using Driver
Update CD created from HP provided ISO image. Solaris 10 is
officially supported OS for DL360 G5 server.
Installation proceeds as expected:
1) At the begining of Solaris installation, Driver Update is used to
load HP driver for raid controller. During installation, disk is
recognized as c1d0t0 (the only disk in system); one partition is
created on this disk.
2) Disk is devided to 6 slices:
c1d0t0s0 - swap, 4GB
c1d0t0s1 - /, cca 32GB
c1d0t0s[3,4,5,6] - /zones/[a,b,c,d] - each cca 160GB
3) At the end of installation, CPQary3 driver is installed to target
system without any errors reported. No errors are reported during
installation at all.
After reboot, GRUB is started. It shows boot menu containing two
options:
- Solaris 'normal' boot
- failsafe boot
PROBLEM: Selecting 'normal' boot leads to immediate system restart.
According to documentation, this case occurs when PCQary3
driver is not installed.
I'm able to boot using 'failsafe' option in grub. After entering single
user, I load PCQary3 driver to runtime using 'install-du' command.
I'm also able to find instaled Solaris using 'install-recovery' and mount
its root volume to /a directory. Necessary driver IS installed inside
/a/kernel/drv/ directory. Options 'bootpath' in /a/boot/solaris/bootenv.rc
file is set up correctly pointing to device associated with /dev/dsk/c1d0t0s1
device. Also GRUB is able to recognize UFS filesystem for boot partition.
I've already tried (without success):
1) Use RAID 1+0 instead of RAID5
2) Create only 3,5GB partition instead of 700GB large one.
3) Place / on c1d0t0s0 instead of c1d0t0s1.
4) Re-create boot archive using 'bootadm update-archive -R /a'
So, everything seems to be installed correctly, but system cannot boot.
Do you have any ideas how to fix this problem?
Jozef

Sounds like an issue I just had with a brand new X4150, installation and failsafe worked fine, but normal booting led to immediate reboot of the server. This was due to an incompatibility of solaris and intel's newest generation xeon chips.
You can still boot 'normal' solaris in 32-bit mode:
hit 'e' at the grub menu, 'e' again to edit the 'normal' boot entry and add 'kernel/unix' after multiboot. This should boot up solaris in 32-bit mode. From there, download and install the latest patch set (125370-06 and 127112-05 are fixing this issue). After that you should be fine.
Bjoern

SQL Server 2012 installation problem (error server didn't respond in timely fashion ....)

Hi everyone,
I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
has window 7 OS , 80 GB freen HD and 6 GB RAM. ) Therefore I download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
But during installation of SQL server I have problem ...it says
the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
The database engine also not installed displaying same error.
I don't know how can i install sql server 2012 to use with visual studio in same computer.
Can somebody please help with SQL installation please ?
It will be great help.
Many thanks in advance
regards
rash

Hi
my summary file is :
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146232832
Start time: 2015-04-06 11:34:18
End time: 2015-04-06 19:04:46
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for IS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for AS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: RASHA-VAIO
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.1.2531.0 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: RASHA-VAIO\RASHA
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: MAIN
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: RASHA-VAIO\RASHA
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RASHA-VAIO\RASHA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Integration Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Client
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Analysis Services
Component error code: 0x80131600
Error description: The service could not be started. Reason: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
thank you

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

Ethernet Intel 82562 pro/100 installation problem on sun 10

HI,
I have installed sun 10 on my Pentium 4 machine. but sun os has not detected on board intel 82562 pro / 100 Ethernet card.
I also searched for drivers on net but could not find any thing.
any one will help me out.
Thanks,
Rajesh

In your Applications folder, there should be an app caller Server.app
Double-click that to start the server installation.

Reports Server 6. installation problem on NT

Hi,
I am trying to install Dev2k Reports server on NT4, SP3. I created the Report server service, configured it to start up service as my user account.
The starting up of the service fails. In the ORAHOME/Rerpot60/server/*.log file I keep getting the 'Daemon failed to listen to port.' error message. I simply have not got a clue, what may be the problem.
Any help will be highly appreciated.
Tamas Szecsy
[email protected] or [email protected]
null

hi Akshay!
Is there something in this log that looks fishy?
i'm not a software engineer (kind of an installation nurse/paramedic), so i can't help you there. did you email the log to Gayle?
love, b

SQL Server 2014 Installation Problem

I run the setup file and hit the New Standalone Installation Of SQL Server.
When i enter the license key and accept the terms of use and pass the Product Updates and Install Setup Files, i see a warning on Microsoft.NET Security ... but i know that's nothing ... i go to Installation Type and choose new installation ...
I choose all features installation and in features selection i choose whole features. and i set the installation directory the default ...I choose default instant in Instant Configuration ... In the Server Configuration i only change SQL server browser i change
it from disabled to automatic . in the Database Engine Configuration I do nothing and i go to Analysis Services Configuration i add current user to Administration permissions for analysis services ... i hit next and go to Reporting Service Configuration and
hit the Install & Configure radio button and hit next ... i add current user again ... in the Distributed Reply Client i pass the controller name & Hit next ... When i hit Install and when installation completes ... i see the an error ... Some of the
features didn't installed successfully and another warning about The specified service has been marked for deletion.
(This warning occurred when i deleted the database engine file from the previous installation folder that the new SQL is going to install in it .)
Reporting Services , Database Engine Services ,
SQL Server Replication , Quality Services and Full-Text and Semantic Extractions for Search features are
not able to install ... why ?
My Operating system is Win 7 SP1 and i have Visual Studio 2013 on my PC.
CPU : Intel Pentium Dual Core

Can you please post output of summary file it would be located at.
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log
You can use
This Link to Locate Log files
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Content Server 10gR3 installation problem on Windows 7

Hi,
I just started working on UCM. I tried to install Content Server 10gR3 on my machine with Windows 7 OS. When I try to install, the installation suddenly aborts or hangs until I abort it. Web server (Apache) and DB (Oracle 10g) are running fine.
System has got adequate configuration: Enough Disk space, 2GB RAM and 2 GHz CPU
The same installer worked perfectly on Windows XP Pro 2002 SP2. Can some one reply if UCM 10g is support on Windows 7 ? This, however, is only for learning purpose on my home PC and not for production use.
I also tried running the installer in Windows XP compatible mode. But this didn't help me either. Do, I need to install Win XP to run it or is there any alternative to make it run on Windows 7.
Thank you
Rama

Hi Srinath,
Thanks for your prompt reply. Could you also please let me know if there is any advanced version of UCM (like 11g) that works on Windows 7 - before I go for a windows XP installation.
Thanks again
Rama

Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2

Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
Log

A few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running.

Solaris 8 on Ultra 2 Enterprise installation problem...

I've a Sun Ultra 2 Enterprise with dual 200 Mhz UltraSPARC I and I tried to install Solaris 8, I download the binaries from Sun site and I burnt the CDs. Insert them in the CDROM drive, I type "boot cdrom", the installation started and it started also the grafical interface, the mouse doesn't work (the cursor still in the center of the screen) and appear a Console windows that asks if Solaris should use the slice c0t0d0s1 for swap, but the keybord (I use a type 5C keyboard and mouse) don't write, so I can't type "yes", but STOP+A works and on OPB I can write.
In the end, on the grafical interface of installation mouse doesn't work and I can't write (works only STOP, arrows, ecc...)
Thanks, Paolo.

Well, to install the box you could type
boot cdrom - install w
that will give you the textbased install GUI if you are booting from Solaris CD 1/2 . You might have to get a working mouse later, but this will at least install the OS for you.

SAP Crystal Server 2011 installation problems on VM Ware

Hello,
I have download Crystal Server 2011 and I want to install on an VM Ware with:
- Windows Server 2008 R2 64Bit
- I am the administrator
- 2 Core
- 6 GB RAM
- MS Visualk C++ 2005 and 2008 is installed
The VM-Ware ist started with Version 4.0.2 Player
I Start the setup an then come the error:
Micrsosoft Visual C++ Run time Libary
Runtime Error
This apllication has request the runtime to terminate it in an unusual way.
Please contact ...
Can anybody help me. I need this testinstallation on Monday..its very urgent.
Many than ks for your help

Hello,
many thanks for your help. I have uninstalled 2005 and 2008. After that I started the Installation of Server 2011. But its the same misstake
Other suggestion?
Tobias

Portal Server 7 installation problem?

Firstly I have installed JES 2005Q4, after that I want to upgrade portal server 6 to the portal server 7. and when I try it, it gave these errors. What I have to do?
1. Install
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}?
Java Enterprise System
|-1%--------------25%---java.io.IOException: java.io.IOException: /opt/sun/portal/bin/psconfig: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:464)
at com.sun.orion.installer.common.config.OrionConfigurator.executeCmdWithArgs(Unknown Source)
at com.sun.orion.installer.portalserv.config.PortalServerConfigurator.unconfigure(Unknown Source)
at com.sun.orion.installer.common.config.OrionConfigurator.performUnconfiguration(Unknown Source)
at com.sun.orion.installer.common.config.ConfigLeaf.uninstall(Unknown Source)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1637)
at com.sun.install.products.InstallNode.finishUninstall(InstallNode.java:1270)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1642)
at com.sun.install.products.InstallNode.finishUninstall(InstallNode.java:1270)
at com.sun.install.products.InstallComponent.performUninstallation(InstallComponent.java:1642)
at com.sun.install.products.Product.performUninstallation(Product.java:223)
at com.sun.install.products.InstallNode.CheckCancelledAndWriteToLog(InstallNode.java:965)
at com.sun.install.products.InstallNode.startInstall(InstallNode.java:1090)
at com.sun.install.products.InstallComponent.performInstallation(InstallComponent.java:1457)
at com.sun.install.products.Product.performInstallation(Product.java:651)
at com.sun.install.tasks.ProductTask.perform(ProductTask.java:153)
at com.sun.wizards.core.Sequence.perform(Sequence.java:343)
at com.sun.wizards.core.SequenceManager.run(SequenceManager.java:226)
at java.lang.Thread.run(Thread.java:595)
Error in executing command : /opt/sun/portal/bin/psconfig unconfig /tmp/psunconfig_devserver.efes-yazilim.com_114287575411016186.xml ------------50%-----------------75%--------------100%|
Installation Failed
No software was installed.
You can view the installation summary and log by using the choices below.
Summary and log files are available in /var/sadm/install/logs/.
You can refer to the Troubleshooting chapter of the Java Enterprise System
Installation Guide to resolve the installation issues.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 2
Installation Log
Installing Java Enterprise System
Log file: /var/opt/sun/install/logs/Java_Enterprise_System_install.
B03201923
Installed: /var/sadm/prod/sun-ps7_0-
entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class
Uninstaller is at: /var/sadm/prod/sun-ps7_0-
entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class
OrionUninstallersun-ps7_0-entsys
Installing RPM: sun-ps7_0-entsys
RPM sun-ps7_0-entsys successfully installed.
Installing RPM: sun-ps7_0-entsys-l10n
RPM sun-ps7_0-entsys-l10n successfully installed.
Mobile Access Component
Skipping component sun-mobileaccess because it is already installed.
Skipping component sun-mobileaccess-config because it is already installed.
Portal Server Administrator
Installing RPM: sun-portal-admin
file /opt/sun/portal/lib/config.jar from install of sun-portal-admin-7.0-1
conflicts with file from package sun-portal-configurator-6.3-25.12.2
file /opt/sun/portal/lib/PSversion.properties from install of sun-portal-admin-
7.0-1 conflicts with file from package sun-portal-core-6.3-25.12.2
file /opt/sun/portal/lib/jdom.jar from install of sun-portal-admin-7.0-1
conflicts with file from package sun-portal-portlet-6.3-25.12.2
Error: RPM sun-portal-admin install failed}.
Install complete. Package: sun-portal-admin
<--[64%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
rpm: Skipping rpm remove of sun-portal-admin, not installed.
rpm: Skipping rpm remove of sun-portal-search, not installed.
rpm: Skipping rpm remove of sun-portal-portlets, not installed.
rpm: Skipping rpm remove of sun-portal-base, not installed.
rpm: Skipping rpm remove of sun-portal-admin, not installed.
Installing RPM: sun-mobileaccess-config
RPM sun-mobileaccess-config successfully installed.
Installing RPM: sun-mobileaccess
RPM sun-mobileaccess successfully installed.
rpm: Skipping rpm remove of sun-mobileaccess-config, not installed.
rpm: Skipping rpm remove of sun-mobileaccess, not installed.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits}

After a successful install the Directory, AM servers are down. You will have to start them after the install.
Stop start the process below in the order:
Stop/Start Directory Server instance:
Stop/Start Webcontainer instance running AM Server and Portal Server
Restart Cacao /opt/SUNWcacao/bin/cacaoadm restart
If the above does not fix it, take a look at the /var/opt/SUNWportal/portals/portal1/logs/<portal-instance>/*.logs
and the webcontainer logs for more details

Solaris 8 (Intel) Installation problems

I have not been successful to install Solaris 8 (Intel version).I am
installing from the (Install CD) and I get to the Solaris Boot screen that
says:
Select one of the identified devices to boot the Solaris Kernel and
choose F2 to continue. Solaris identifies 2 IDE Disk Drives (on Primary Controller),
a third IDE HDD (Secondary master) and the CD ROM as a slave on the Secondary
Controller. When I choose the CD ROM as the Boot disk, the system hangs
forever!. Any suggestions?
P.S: The installation CD contains the following:
image = 550MB
(.VOLUME) : 47 bytes
ADD_INSTALL_CLIENT: 54.5KB
BOOT: 0 bytes
COPYRIGHT: 5.3KB
MODIFY_INSTALL_SERVER = 3.37KB
The total of these files is : 93KB
Dose this seem correct, having in mind that the image file is 550MB
Thanks,
Kamel Elchazli

At the "(b)oot or (i)nterpreter" prompt, type:
b kadb -v
This loads the Solaris kernel under kernel debugger (kadb) control.
Apparently your system crashes with a kernel panic, and when kadb
is loaded, kadb will catch the kernel panic error and drop you into the
debugger so that you can read the panic messages.
The "-v" option enables verbose kernel messages, which might be
useful to diagnose the problem.

Solaris 2.8 on Intel Installation Problem

When attempting to install Solaris on Intel 2.8, everythin g goes fine and the files are copied, but it fails at the end with the following message:
Customizing system files
- Mount Point table (etc/vfstab)
- Network host address (etc/hosts)
Error: Could not copy file (tmp/root/etc/openwin/etc/devdata/SUNWaccel/monitors/pnp/edidgen.vda) to
(/a/etc/openwin/etc/devdata/SUNWaccel/monitors/pnp/edidgen.vda)
Error: Unable to copy a temporary file to it's final location
I have tried this time and time again, should I disable PNP in my Bios or what could be the cause of my problems?
Thanks in advance

Looks like the failure that you are having is when the install program is trying to copy the PNP moniter spec from the /tmp location to the /etc location. May be for some reason the edidgen.vda never got created in the first place.
Can you please mention the version of Solaris 8 you are installing and if you have a plug and play monitor.
Regards
Angelo
Sun Developer Support

Problem about D-link card installation on Solaris 8 intel

hello,
I don't know how to install my ethernet card on the Solaris 8 intel.
It's a D-link DFE-530TX model on PCI bus.
Could you send my the methode to install it.
Thank you very much.

Hi,
refer this URL http://sun.drydog.com/faq/s86faq.html.
(Note: question - 6.7)
revert back.
Thanks.
regards,
senthilkumar
SUN - DTS

Solaris 8 on Intel STL2 server board - installation problem

Similar Messages

Maybe you are looking for