Solaris 8 or 9 on Sparc 20

I have a Sparc 20. I am unable to get to miniroot using either Software 1 or Installation CDs (either Solaris 8 or 9 - isos downloaded and burned a variety of ways using both Nero and CD Creator).
The machine boots. The alias for the CD drive is correct (I've also tried a different CD drive with same result) but when I issue a boot cdrom -s command the machine begins to load from the CDROM, then after 20 to 30 secs or so, it just stops on the "hourglass". It has loaded some data from CD because the CD light is on for a good while and the "hourglass" does spin for several revolutions before it just stops. Should I be looking at memory? I can L1-A at this point just fine - so machine isn't completly frozen. Help appreciated?
The machine does boot fine using a Redhat port for SPARC (same type of CDRs - 700min - so that ain't the prob either).
Furthermore I have a Solaris 9 X86 machine working fine on net. Can I use this as a Install server for a net boot on the SPARC (sounds like no from what I've read). If someone can point me to useful help on this it would be great. I understand that the filesystems on the Sparc CDs can't be read on X86 Solaris.
Anyway - distinct Newbie on Sun HW... Comming from SGI background. Excuse the old hardware - it's all I've got for the moment.
Anything will be helpful

My SS20 was super picky when it came to the speed of the burned media, but only for Solaris for some reason. I burned Aurora 1.0 at 32x and It was good to go, but Solaris 9 cried when I burned it any faster than 4x.
Have you tried burning it at 4x, or even 1x?
It also takes what seems like AGES to load up from the Solaris install CDs, and unless your using 10K RPM SCSI with 256+ Mb of RAM, expect it to take 6-12 hours to install the OS from the stock CD-Rom on an SS20.

Similar Messages

Problem with application directories on JDS - Solaris 10 11/06 sparc

I am running a fully patched JDS on a Sun Blade with Solaris 10 11/06 sparc.
After installing, removing, and re-installing Sun Download Manager 2.0 (web start version) I am having problems with JDS application menus.
I used File Manager (probably accessed through the This Computer Desktop icon) to move around directories under applications:///. This information is saved in ~/.gnome2/vfolders. Folders available from the Launch menu under Applications were all messed up, but I solved this problem by removing all contents of ~/.gnome2/vfolders and restarting JDS.
Now, when I enter the This Computer icon on the Desktop, and click on the Applications icon in there, there is an extra Applications icon there that is not associated with any application and cannot be removed (when I try and trash it, I get an error saying something about "not on same file system"). Also, when I enter the Internet folder under Applications, there is an extra Internet icon in there that also cannot be removed. These extra folders are not seen when accessing the Applications menu from the Launch menu. How can I clean up these "bad" launchers, or folders, or whatever they are, that appear to exist only under the Applications directory accessible through This Computer (computer:///)?
Thank you...

Maybe the answer is here:
http://docs.sun.com/app/docs/doc/819-0918/6n3aglfdl?l=en&a=view&q=location+of+applications-all-users
To Add a Menu Using Menu Files
To add a menu for all users, perform the following steps:
1. Create a directory entry file for the item that you want to add. Create the directory entry file in the /usr/share/gnome/vfolders directory. For more information about directory entry files, see Directory Entry Files.
2. Locate the vfolder information file for the location where you want to add the menu. For example, to add a menu to the Applications menu, locate the file /etc/gnome-vfs-2.0/vfolders/applications-all-users.vfolder-info.
3. In the vfolder information file, add a <Folder> element for the new menu. For more information about vfolder information files, see Vfolders and Menus.
The next time users log in, the menu is in the assigned location.

Oracle 9.0.1 on Solaris 9 4/03 Sparc ?

Hi,
I have a CD pack for Oracle 9.0.1 and I was going to install it on Solaris 9 4/03. But then I read the release notes and Solaris 9 is not mentionned. Not mentionned either in 9.2.0.1 releases notes... Only saw it for Oracle 10.
Is Oracle 9.0.1 supported on Solaris 9 (4/03) Sparc ?
Thanks,
Alex...

Anyone ?

Installation of Solaris 10 on SUN Sparc M4000

Hi
I am trying to install Solaris 10 on SUN SPARC M4000.
Here is the error I have:
+Enter filename [kernel/sparcv9/unix]: /platform/sun4v/kernel/sparcv9/unix+
+Enter default directory for modules [platform/sun4v/kernel /kernel /usr/kernel]:+
krtld: load_exec: fail to expand cpu/$CPU
krtld: error during initial load/link phase
panic - boot: exitto64 returned from client program
Program terminated
It seems that version of Solaris I trying to install is not support by the Hardware, when I use another Solaris 10 DVD, it works...
But the problem is that I need to install this Solaris version because others softwares are depending on that.
If someone knows how to make this installation possible, it will be very helpfull.
Thanks in advance.
BR
Racine

Minimum Supported
Solaris[tm] Operating Environment Versions for the M4000 are as follows
OpenSolaris 2009.06
SPARC64 VI:
10 - 11/06 (U3) plus required patches (minimum)
10 - 08/07 (U4) (recommended)
SPARC64 VII:
10 - 08/07 (U4) plus required patches (minimum)
10 - 5/08 (U5) (recommended)
A full matrix for the M4000 which details the minimum patch requirements to support the h/w is available from https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1145383.1

Solaris 8 install on Sparc without CD-ROM

I would like to install Solaris 8 on a Sparc 20 workstation that does not have a CD-ROM drive. I believe it should be possible to do an installation from another machine over the network. Does anyone have experience doing such an install? The host that I hope to install from is an x86 linux box, if that makes any difference.
Any advice / hints would be appreciated.
joey richards
[email protected]

Isn't is easier to temporarily attach a scsi cdrom to the
sparc, just for installing the os?
But you can boot/install solaris over the network.
The boot procedure is documented here:
http://docs.sun.com:80/ab2/coll.40.6/REFMAN1M/@Ab2PageView/25227
You'll need:
- a "rarp" deomon that maps the sun's ethernet addes to an
ip-address.
- a "tftp" daemon that has a copy of the boot code for the
client. Stored under the hex encoded IP address of the
discless client with it's architecture name appended, like
this (example for a client at addr 172.20.0.72):
% pwd
/tftpboot
% ls -l AC* inetboot.sun4m.solaris.8
lrwxrwxrwx 1 root other 24 Jul 23 2000 AC140048 -> inetboot.sun4m.solaris.8
lrwxrwxrwx 1 root other 8 Jul 23 2000 AC140048.SUN4M -> AC140048
-rw-r--r-- 1 root other 117204 Jul 16 2000 inetboot.sun4m.solaris.8
You'll find the "inetboot" somewhere on the solaris 8 boot
cd. (...lib/fs/nfs/inetboot ?)
- a rpc.bootparamd server, that tells the client where it
can NFS mount it's root filesystem.
An entry for a discless client named "disclessclient" looks
like this:
disclessclient root=server:/cdrom/cdrom0/s0/Solaris_8/Tools/Boot \
install=server:/cdrom/cdrom0/s0 \
boottype=:in rootopts=:rsize=32768
Of cause the server must have the "Software 1 of 2" solaris
cdrom mounted and must "NFS export" it. Note, the discless
client needs "root" access to the filesystem; i.e. do not
map the root uid to nobody.
Bringing in linux to the equation complicates matters, for
sure...

CPU message on Solaris 8 install on Sparc U30

When installing Solaris 8 on Ultra Sparc 30, I get the following message after "Configuring /dev and /devices"
panic[cpu0]/ thread=2a1001dd40: BAD TRAP: type31 rp 2a1001cf30 addr=2f150fcb998 mmu_fsr=0
followed by;
sched: trap type=0x31
followed by what appears to be a memory dump
followed by Watchdog Reset and Externally Initiated Reset
Is this a media problem or hardware falilure?

What's version of NES/Iplanet you are running?
thanks
Jong
"Ed Itkin" <[email protected]> wrote:
>
I'm getting strange message when Netscape Client starts on Solaris 8:
cbfe-dev-web01:/opt/weblogic:263> /opt/netscape/netscape
ERROR: ld.so.1: /opt/netscape/netscape: fatal: relocation error: file
/opt/netscape/plugins/libproxy.so:
symbol __nsapi30_table: referenced symbol not found
Cant load plugin /opt/netscape/plugins/libproxy.so. Ignored.
Can you give me idea what happened to NSAPI ? It worked before.
I rebooted the Solaris server - it did not help.
Just a reminder : libproxy.so was copied from
Weblogic 6.0 SP2 ../lib/solaris directory into /opt/netscape/plugins.

Samba 4.x in Solaris 10 1/13 SPARC

Hi,
Can I get samba version 4.x in Solaris 10 1/13 SPARC?
I need to work Windows Server 2012 shares with encryption and SMB version 3
I have smbclient 3.6.20
thanks
fabian

As we don't provide this version, the only ways to obtain it is to compile directly the code source or find a package in Internet that works with Solaris 10.

How to configure CUPS in Solaris 10 X86 and SPARC

Dears,
I need help in configuring CUPS for Solaris 10 X86 as well as on SPARC.
What i did?
Downloaded the CUPS 1.5.0
read the readme.txt
read the INSTALL.txt
Pre-req installation requires :-
CFLAGS= -i /some/directory \
CPPFLAGS = -i /some/directory \
CXXFLAGS = -I /some/directory \
DSOFLAGS = -L /some/directgry \
LDFLAGS = -L /some/directory \
./configure --
It errors out with
checking for gawk ... no
checking for mawk... no
checking for nawk ...nawk
chekcing for gcc ... no
checking for cc ... no
checking for cl.exe no
Configure error: no acceptable C compiler found in $PATH
see 'config.log' for more details
I installed all the missing dependencies from www.sunfreeware.com and I have the same problem.
I also tried to install the software packages from the operating system dvd... like for
ls -lrt gcc
gcc "SUNWgcc", "SUNWgccS", "SUNWgccruntime"
ls -lrt cc
cc "SUNWgccruntime", "SUNWlccom", "SUNWcctpx", "SUNWccisgn" , "SUNWccinv", "SUNWccfwctrl", " SUNWccfw", "SUNWccccrr", "SUNWccccr", "SUNWccccfg", "SUNWislcc",
"SUNWaccu", "SUNWaccr", "IPLTccons", " SUWgccs", "SUNWgcc", "SUNWmccom", "SUNWmcc", "SUNWusbccids", "SUNWusbccid"
ls -lrt gawk
no results
ls -lrt mawk
no results
ls -lrt cl.exe
no results
Is there any way should i follow apart from the above?
Rgds,
Mky

Check pkginfo -l for each package.
export the PATH variable where the packages are installed, like /usr/local/bin and etc.

Solaris 8 with a Sparc 20

Can Solaris 8 be installed on a Sparc 20? And if so, where can I find that information on this website?
Also, what firmware upgrades will be needed?
Much Thanks,
Randall

Yes, Solaris 8 will run on Sparc 20
-S. Puckett
BrokenBox Computers

Upgrading Solaris 8 to Solaris 10 on SUN Sparc E2900 server

Hi,
We have a Sparc E2900 server which has Solaris 8 & Veritas Volume Manager 4.0. UFS & VXFS filesystems are under Veritas control.
We are planning to upgrade Solaris 8 to Solaris 10.
My questions are as follows
1) Can we upgrade from Solaris 8 to Solaris 10 directly ?
2) If Yes does Solaris 10 support Veritas Filesystem ?
3) Which is the best site to get information regarding upgradation ?
Regards,
Tejas J Raval

2) If Yes does Solaris 10 support Veritas Filesystem ?No, it dows not. If you want to use VxFS you still need to have Veritas products installed on this server

Running Solaris 8 and Solaris 10 on a SPARC box at the same time

I know that this is not possible, but still... need to clear it out from the experts...
Have a upgrade request of Solaris 8 to Solaris 10. However, Solaris 8 environment should not be disturbed. How can this be done without going for another SPARC box?
Can I have both Solaris 8 and Solaris 10 running concurrently on the same SPARC box?
Thanks in advance.

Have a upgrade request of Solaris 8 to Solaris 10.
However, Solaris 8 environment should not be
disturbed. How can this be done without going for
another SPARC box?
Can I have both Solaris 8 and Solaris 10 running
concurrently on the same SPARC box?You can add a second boot disk and use Sun's Live Update to install the upgrade on the second boot disk. Boot from either, though you can't run both simultaneously.

Solaris 10 u3 GA(Sparc)

I am running SPARC Solaris 10 u3 on an Ultra 5.
Whenever I load SMC it reports "no solaris management console server running".
I have tried /etc/init.d/init.wbem stop / start / status & none of those command generate any kind of message.
I suspect something is wrong with the SMC / WBEM install on my system; so I want to reinstall both.
Does anyone know if WBEM and SMC need to be uninstalled first? Is there a certain order that needs to be followed when uninstalling / reinstalling?
Anyone have any suggestions instead of reinstalling SMC / WBEM?
Thanks,
John

I have problems when downloading this CD format
language pack. It stops downloading everytime reaches
13.9M, and it doens't work neither when I changed
account.. : (
Who has this file that can share with me via ftp or
sth.. ?
TIA,
SunHello TIA,
I am currently downloading this file at the moment and I have reached 40% so far. If you are still interested in getting this file please let me know.
Richard

Solaris cluster 3.2 Sparc

Hi folks
First things first. I may not have great knowledge about Solaris clusters, so please be merciful :)
Here it is what I have:
- 2 x Netra T1 AC200 each with 1GB Ram, 2x18GB disks, 500 MHZ Sparc Cpu, 4 port ethernet card
- 1 array netra d130 3x36 GB
-- cable et all, switches , you name it
So, I set up the OS, all ok. I set up the cluster, all SEEMS to be ok.
But when I define my resources and stuff like that all goes fine, except when I try top bring the resource group on line.
On another configuration I teste the shared logical hostname and works fine.
Group Name Resources
Resources: ingresc nodec ingresr
-- Resource Groups --
Group Name Node Name State Suspended
Group: ingresc node2 Unmanaged No
Group: ingresc node1 Unmanaged No
-- Resources --
Resource Name Node Name State Status Message
Resource: nodec node2 Offline Offline
Resource: nodec node1 Offline Offline
Resource: ingresr node2 Offline Offline
Resource: ingresr node1 Offline Offline
scswitch: (C969069) Request failed because resource group ingresc is in ERROR_STOP_FAILED state and requires operator attention
Now, in /var/adm/messsages I spotted this :
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<IngresNCG.nodec.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
A little bit of research points in the direction of a bug (see CR 6565601)
Here it is what I see as my options:
1 - reinstall Solaris OS, but not the Solaris Cluster 3.2, instead using Solaris Express 10/07 or 2/08. But will this combination work ? Or will it work only in the combination Solaris Cluster Express and Solaris Express Developer Edition ? If the later, which versions will work together ?
2 - Beg for a Solaris Cluster 3.2 patch, although in my humble opinion, this should be free since it looks to me that once you write your own stuff, you run in the bug, and after all it is education
Any ideas, help, greatly appreciated
Many thanks
Armand

Although names are different since I used two setups, this is the relevant part of /var/adm/messages.
It looks to me Ingres resource is failing:
Mar 6 17:08:03 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:03 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<IngresNCG.nodec.10>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:05 node2 svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/scsymon-srv:default: Method "/usr/cluster/lib/svc/method/svc_scsymon_srv start" failed with exit status 96.
Mar 6 17:08:05 node2 svc.startd[8]: [ID 748625 daemon.error] system/cluster/scsymon-srv:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 1% of timeout <300 seconds>
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_PRENET_STARTED
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_STARTING
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <500> seconds
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_start>:tag=<IngresNCG.nodec.0>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource nodec status on node node2 change to R_FM_ONLINE
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource nodec status msg on node node2 change to <LogicalHostname online.>
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <500 seconds>
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_JUST_STARTED
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_ONLINE_UNMON
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_STARTING
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_MON_STARTING
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_UNKNOWN
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Starting>
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/ingres_server_start> for resource <IngresNCR>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</global/disk2s0/ing_nc_1/ingresclu/bin/ingres_server_start>:tag=<IngresNCG.IngresNCR.0>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<IngresNCG.nodec.7>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:12 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <300 seconds>
Mar 6 17:08:12 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_ONLINE
Mar 6 17:08:13 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Bringing Ingres DBMS server online.>
Mar 6 17:08:30 node2 sendmail[534]: [ID 702911 mail.alert] unable to qualify my own domain name (node2) -- using short name
Mar 6 17:08:30 node2 sendmail[535]: [ID 702911 mail.alert] unable to qualify my own domain name (node2) -- using short name
Mar 6 17:08:31 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Bringing Ingres DBMS server offline.>
Mar 6 17:08:45 node2 SC[Ingres.ingres_server,IngresNCG,IngresNCR,stop]: [ID 147958 daemon.error] ERROR : HA-Ingres failed to stop.
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_FAULTED
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Ingres DBMS server faulted.>
Mar 6 17:08:46 node2 SC[Ingres.ingres_server,IngresNCG,IngresNCR,start]: [ID 335575 daemon.error] ERROR : Stop method failed for the HA-Ingres data service.
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/ingres_server_start> failed on resource <IngresNCR> in resource group <IngresNCG> [exit code <1>, time used: 11% of timeout <300 seconds>]
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_START_FAILED
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group IngresNCG state on node node2 change to RG_PENDING_OFF_START_FAILED
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_STOPPING
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_MON_STOPPING
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_UNKNOWN
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Stopping>
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/ingres_server_stop> for resource <IngresNCR>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</global/disk2s0/ing_nc_1/ingresclu/bin/ingres_server_stop>:tag=<IngresNCG.IngresNCR.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_monitor_stop>:tag=<IngresNCG.nodec.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:47 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Bringing Ingres DBMS server offline.>
Mar 6 17:08:48 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <300 seconds>
Mar 6 17:08:48 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_ONLINE_UNMON
Mar 6 17:09:00 node2 SC[Ingres.ingres_server,IngresNCG,IngresNCR,stop]: [ID 147958 daemon.error] ERROR : HA-Ingres failed to stop.
Mar 6 17:09:02 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_FAULTED
Mar 6 17:09:02 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Ingres DBMS server faulted.>
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/ingres_server_stop> failed on resource <IngresNCR> in resource group <IngresNCG> [exit code <2>, time used: 5% of timeout <300 seconds>]
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_STOP_FAILED
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group IngresNCG state on node node2 change to RG_PENDING_OFF_STOP_FAILED
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 424774 daemon.error] Resource group <IngresNCG> requires operator attention due to STOP failure
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_STOPPING
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource nodec status on node node2 change to R_FM_UNKNOWN
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource nodec status msg on node node2 change to <Stopping>
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<IngresNCG.nodec.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:09:04 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.005.085:0, remote = 000.000.000.000:0, start = -2, end = 6
Mar 6 17:09:04 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource nodec status on node node2 change to R_FM_OFFLINE
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource nodec status msg on node node2 change to <LogicalHostname offline.>
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <300 seconds>
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_OFFLINE
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group IngresNCG state on node node2 change to RG_ERROR_STOP_FAILED
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 424774 daemon.error] Resource group <IngresNCG> requires operator attention due to STOP failure
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 663692 daemon.error] failback attempt failed on resource group <IngresNCG> with error <resource group in ERROR_STOP_FAILED state requires operator attention>
Mar 6 17:09:10 node2 java[1652]: [ID 807473 user.error] pkcs11_softtoken: Keystore version failure.Thank you
Armand

How-To create a customized Solaris 10 DVD for Sparc with GRUB

I am currently using Solaris 10 U6 x86 custom jumpstart from DVD. This boot mechanism has always been Grub. I know that Solaris 10 U8 Sparc boot mechanism has been changed to Grub as well. I have referenced an excellent Blueprint on creating customized jumpstart DVD for x86. I am looking for some documentation or Blueprint which describe the similar process for Sparc. I am hoping the mkisofs command options will be the most significant difference between x86 and Sprarc.
Is there a document which describes the de-composition of the DVD for Sparc based platforms? And the re-assembly of the custom DVD?
Thanks very much.
John

Hello Aruna,
As far as I know you cannot remove the default items for the menu.
Sophie

Where can I download Solaris 2.51 for Sparc?

We have an old Sparc running Solaris 2.51 that
needs to stay running on that due to various reasons,
but the hard drive is failing. The Solaris CD's are missing.
Where can I download or replace them?
Thanks,
Linda

Hi Linda
I have a two wallets with Solaris 2.5.1, Disksuite 4.0 etc CDs.
If you want one just let me know and I can post it to you.
I am not sure where you are but if you are in the UK you can phone me on 01563 576808
and give me your details, or reply with your address.
Regards
Janis

Help! Having Trouble Installing Solaris 10 on a SPARC machine

Hi All,
I recently found a new job, and one of the requirements is I learn Solaris 10. I have successfully loaded the most recent x86 version on a laptop, but.....
My workplace has a sun blade 2500 (several actually) and I am trying to load the newest Solaris 10 SPARC version that I just downloaded. I downloaded it on my PC (Windows vista, yech), unpacked the ISO using winzip, and burned the files to a DVD. When I put that newly burned DVD into the sunblade 2500, I press stop-a, then type "boot cdrom", and after the reboot, I get a message saying
Bad magic number in disk label
Can't open disk label package
Can't open boot device
{0} ok
So for some reason my burned DVD is giving me a "bad magic number" error - and its not just one machine, all the machines I tried to load it on said the same thing.
Fortunately, a co-worker that recently left the company had Solaris 10 burned to a set of CDs (5 plus the language CD) and that installed well (albeit version 08/07 of Solaris 10).
So I am at the point where I can probably figure out how to upgrade the machine, but it bothers me that I couldnt successfully download the ISO from sun, unpack the contents, burn said contents to a DVD (using Windows), then take that DVD and install SPARC Solaris 10 on a sun blade 2500. I know that at some point I wont have the crutch of those CDs. Does anyone know what I was doing wrong? Is there a certain way you have to burn the DVD, or use a certain package to unpack the ISO for the SPARC version?
Thanks,
Brent

Hi,
Make sure that write your DVD at 8X speed.
Also Refer thread:
http://www.motherboardpoint.com/bad-magic-number-disk-label-t146549.html
Regards,
X A H E E R

Solaris 8 or 9 on Sparc 20

Similar Messages

Maybe you are looking for