Solaris 8 SNMP daemon and Oracle mib ?

Hi guys,
Sorry to ask such a numb question but : is there a good manual wich explain how to manage solaris 8 snmp daemon ?
The real question is : how to add an oracle mib in the snmp configuration files ?
Thanks for any response :-)
@+

Hi.
answers inline:
sanjay wrote:
Hi,
Can Weblogic Express (Cluster edition)6.1J sp2 be installed on Sun Solaris(Sparc)
8(64 bit) ?Yes - http://edocs.bea.com/wls/platforms/index.html#solaris8
>
>
Can Weblogic Express (Cluster edition)6.1J sp2 JDBC driver be used for Oracle 8.1.7(Solaris
64 bit) ?
Yes - http://edocs.bea.com/wls/platforms/index.html#jdbc
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

No Oracle MIBs in SNMP walk queries (10g)

I configured SNMP support on my Oracle 10g database servers.
However, when I attempt an SNMP walk, I get a few MIBs from
SNMPv2 and HOST-RESOURCES, but nothing Oracle related,
which is my goal for installing the SNMP support.
Any hints or advice on where I should go from here? Do I need
to "load" some MIBs on these servers before they will show up?
Thanks,
Scott

Red Hat Enterprise Linux, and I installed the Oracle SNMP, not the OS.
# chkconfig --list | grep snmp
snmptrapd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
$ emctl status subagent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Sub agent is running..
It's setup to listen on port 1161, which I guess is Oracle default.
I receive all sorts of general system MIBs, but no Oracle MIBs...
I could just enable the Red Hat SNMP service much easier if all
I wanted to poll was for system related information. :)
Thanks,
Scott

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

4195bee8-4db0-4799-a674-18f89aa500cb wrote:
i dont have access to My Oracle Support can u send text or html of document please?
Moderator Action:
No they cannot send you a document that is available only to those with access to MOS.
That would violate the conditions of having such service contract credentials.
Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
Your post is locked.
Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
That's the proper location for Audit Vault questions.

How do I map Hitachi SAN LUNs to Solaris 10 and Oracle 10g ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

Yes that is correct however due to use of Solaris 10 MPxIO multipathing software that we are using with the Hitachi SAN it does present an extra layer of complexity and issues with ASM configuration. Which means that ASM may get confused when it attempts to find the new LUNs from the Hitachi SAN at the Solaris OS level. Oracle Metalink note 396015.1 states this issue.
So my question is this: how to configure the ASM instance initialization parameter asm_diskstring to recognize the new Hitachi LUNs presented to the Solaris 10 host?
Lets say that I have the following new LUNs:
/dev/rdsk/c7t1d1s6
/dev/rdsk/c7t1d2s6
/dev/rdsk/c7t1d3s6
/dev/rdsk/c7t1d4s6
Would I set the ASM initialization parameter for asm_diskstring to /dev/rdsk/c7t1d*s6
as correct setting so that the ASM instance recognizes my new Hitachi LUNs? Solaris needs to map these LUNs using pseudo devices in the Solaris OS for ASM to recognize the new disks.
How would I set this up in Solaris 10 with Sun multipathing (MPxIO) and Oracle 10g RAC ASM?
I want to get this right to avoid the dreaded ORA-15072 errors when creating a diskgroup with external redundancy for the Oracle 10g RAC ASM installation process.

Parameters of NFS in Solaris 10 and Oracle Linux 6 with ZFS Storage 7420 in cluster without database

Hello,
I have ZFS 7420 in cluster and OS Solaris 10 and Oracle Linux 6 without DB and I need mount share NFS in this OS and I do not know which parameters are the best for this.
Wich are the best parameters to mount share NFS in Solaris 10 or Oracle Linux 6?
Thanks
Best regards.

Hi Pascal,
My question is because when We mount share NFS in some servers for example Exadata Database Machine or Super Cluster for best performance we need mount this shares with specific parameters, for example.
Exadata
192.168.36.200:/export/dbname/backup1 /zfssa/dbname/backup1 nfs rw,bg,hard,nointr,rsize=131072,wsize=1048576,tcp,nfsvers=3,timeo=600 0 0
Super Cluster
sscsn1-stor:/export/ssc-shares/share1 - /export/share1 nfs - yes rw,bg,hard,nointr,rsize=131072,wsize=131072,proto=tcp,vers=3
Now,
My network is 10GBE
What happen with normal servers only with OS (Solaris and Linux)?
Which parameters I need use for best performance?
or are not necessary specific parameters.
Thanks.
Best regards.

Solaris 10 Sparc and Oracle 11g DB with GG

Hi,
I have Solaris system with Solaris 10 Sparc and Oracle 11g DB.
From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10.
I tried to Install but I am getting the following error..
$ ldd ggsci
ldd: ggsci: ELF machine type: EM_AMD64: is incompatible with system
Can you please let us know which might be the best golden gate software for us.

Vinod wrote:
I have Solaris system with Solaris 10 Sparc and Oracle 11g DB.
From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10.
I tried to Install but I am getting the following error..
$ ldd ggsci
ldd: ggsci: ELF machine type: EM_AMD64: is incompatible with system
Can you please let us know which might be the best golden gate software for us.Possibly the solaris x86_64 build was downloaded, instead of the build for solaris sparc? (I think all of our current solaris builds are 64-bit.) It's almost certainly a download / OS mismatch.
What exact file did you download (what's the file name, before unzipping it), and on your solaris box, what's the result of => "uname -a" and/or "isainfo -v" ...? Just make sure the downloaded file matches what the box is running...
Btw, not that it matters in this case, but if you were hypothetically running a 32-bit database on a 64-bit OS, you'd need a 32-bit build of GoldenGate. But I don't know why you'd do that. (And that's not the problem here.)

Forte M2 and Oracle 8.1.6 on Sun Solaris 2.5.1

Anybody out there running Forte M2 with Oracle version 8.1.6?? The best
would be on a Sun Solaris 2.5.1 machine.
Our Oracle dba wants to upgrade for another application but Forte's
certification matrix only goes up to Oracle 8.0.3
Any experiences with version M and Oracle 8.1 would be helpful.
Jerry Fatcheric
Verizon (Formerly Bell Atlantic Mobile)

did this problem ever get solved. My problem seems similar, but, I get the "value not allowed" with the "end-of-file on communication channel" errors

How to disable snmp v1 and v2 on solaris 10?

Hi there,
How can snmp v1 and v2 be disabled on solaris 10 update 3?
We are only interested in keeping the v3 enabled.

So, it may be better to create links in $APP_HOME/bin/java that point to the binaries in /usr/jdk/version-you-want-to-use/bin/sparcv9 rather than copying binaries.
To see current java links: (I edited all non-java-related links out of listing)
-> ls -la /usr/bin/j*
lrwxrwxrwx 1 root other 15 Oct 1 2007 /usr/bin/jar -> ../java/bin/jar
lrwxrwxrwx 1 root other 21 Oct 1 2007 /usr/bin/jarsigner -> ../java/bin/jarsigner
lrwxrwxrwx 1 root other 16 Oct 29 2007 /usr/bin/java -> ../java/bin/java
lrwxrwxrwx 1 root other 17 Oct 1 2007 /usr/bin/javac -> ../java/bin/javac
lrwxrwxrwx 1 root other 19 Oct 1 2007 /usr/bin/javadoc -> ../java/bin/javadoc
lrwxrwxrwx 1 root other 17 Oct 1 2007 /usr/bin/javah -> ../java/bin/javah
lrwxrwxrwx 1 root other 17 Oct 1 2007 /usr/bin/javap -> ../java/bin/javap
lrwxrwxrwx 1 root other 18 Oct 29 2007 /usr/bin/javaws -> ../java/bin/javaws
lrwxrwxrwx 1 root other 24 Oct 29 2007 /usr/bin/jcontrol -> ../java/jre/bin/jcontrol
lrwxrwxrwx 1 root other 15 Oct 1 2007 /usr/bin/jdb -> ../java/bin/jdb
lrwxrwxrwx 1 root root 30 Oct 1 2007 /usr/bin/jmplay -> ../jdk/packages/jmf/bin/jmp
lay
lrwxrwxrwx 1 root root 50 Oct 1 2007 /usr/bin/jnlp2pkg -> ../jdk/packages/org.jdesk
top.jdic-0.8/bin/jnlp2pkg
lrwxrwxrwx 1 root root 13 Oct 1 2007 /usr/bin/jsh -> ../../sbin/sh
BTW, on my machine (SunFire v445, Solaris10, 64-bit)
isainfo -v produces this:
-> isainfo -v
64-bit sparcv9 applications
vis2 vis
32-bit sparc applications
vis2 vis v8plus div32 mul32
So, what will this do for me?
or even better $(JAVA_HOME)/bin/`isainfo -v`/Edited by: SolarisSAinPA on Jun 12, 2008 5:38 PM
Added listing of java-related-links

Oracle MIBs available for compiling?

Are the Oracle MIBs available somewhere so I can download
and compile them into my management system? I'm able to
see a chart of many of them in the SNMP Support Reference
Guide, but that doesn't help my NMS when it performs a walk
and we want to easy understand the output.
Thanks!
Scott

orashiju wrote:
What is the best methos for replcating oracle database from a production database with every 15 min interval..
what are the oracle features available for this scenario
Thanks
ShijuIs there any specific reason to open a new thread for the same discussion that you have started here,
Please suggest a suitable method
Aman....

Different between Oracle 8.1.7.0.0 and Oracle 8.1.7.2 ?

1) Hi all, i have some doubt about the oracle versioning technique. For example, i had installed oracle 8.1.7 release 3 in a SUN Solaris version 8 and the database character set is in UTF-8. Then i select sql : "Select * from product_component_version" and the result is "Oracle8i Enterprise Edition 8.1.7.0.0 ". What does that means ? Our DBA in another location had installed the oracle 8.1.7 release 2 in their db server with the same OS and same database character set which is UTF-8. But the result from the "Select * from product_component_version" is "Oracle8i Enterprise Edition 8.1.7.2 ".
So as a conclusion, i had confused about the oracle versioning technique, can somebody please explain to me ?
2) My second problem is actually related to problem stated above (1). In the Oracle 8.1.7 release 2 database,
when i select a clob/blob value for update, i sometimes encountered the problem as follows but in our Oracle 8.1.7 release 3 the problem didn't exist at all after investigating that all the java code and other factor remain the same but not the oracle version.
java.io.IOException: ORA-22990: LOB locators cannot span transactions
ORA-06512: at "SYS.DBMS_LOB", line 700
ORA-06512: at line 1
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at oracle.jdbc.dbaccess.DBError.SQLToIOException(DBError.java)
at oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java)
at oracle.jdbc.driver.OracleBlobOutputStream.write(Compiled Code)
This was an error log in our backend log and in the web browser it showed "Request Timeout" in both IE and Netscape. We are using J2EE, Oracle DBMS and IBM Websphere App Server for our e-commerce system.
But retrying the request sometimes may work but most of the time failed.
The above error didn't exist in our server using Oracle version 8.1.7 release 3 (8.1.7.0.0) and Oracle
version 8.1.6.0.0. But ORacle version 8.1.7.2 release 2 is encountering this problem now.
Somebody please help me on this problem, our developers and DBA had try to solved this problem one week ago but still don't know what is the cause.

Oracle 9i client would fit you well. You need ORACLE_HOME set, ORACLE_HOME/bin in the path variable and of cource check that the user has access there. Are you using OCI to connect to Oracle? JDBC thin client is a better approach, in my opinion, as it is pure java.
Oracle also provides something called "instant client", which provides connectivity only for applications.

Problem with Linus Ubuntu 7.04 and Oracle-Xe debian package

Hi all,
Installed Oracle 10g XE on my Ubuntu 7.04 using universal Debian Package : oracle-xe-universal_10.2.0.1-1.0_i386.deb. No problem during the installation . After finished the installation, I configured the database to use port 6000 and its password (Listener port set to default).
But when I tried to access the database home page using "http://127.0.0.1:6000/apex", it cannot be accessed. Then I tried to verify my database server using /etc/init.d/oracle-xe status and here's the output:(before it, I make user the database was realy online by typing /etc/init.d/oracle-xe start)
###########################333###
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-AUG-2007 22:45:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=wks-082)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 110: Connection timed out
then I tried to open the log in /usr/lib/oracle/xe/app/oracle/admin/xe/bdump/alert_XE.log and here is the output
Thu Aug 9 14:54:14 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:27 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:33 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7532.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7532
Thu Aug 9 14:54:35 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:46 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7551.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7551
Thu Aug 9 14:54:53 2007
Are there anyone who can help me? I really have no idea since I'm a newbie here, both linux and oracle. Any hint are welcome, thanks in advance.
Regards,
Rudi Sadria

Thx for the help, I already verify the /etc/hosts and these are the output:
127.0.0.1 localhost
127.0.0.1 wks-082
127.0.0.1 localhost.localdomain localhost localhost.domain
127.0.0.1 hostname hostname.domain
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
I check the listener status and here's the output:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 10-AUG-2007 15:14:45
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 10-AUG-2007 15:14:39
Uptime 0 days 0 hr. 0 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=wks-082)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
and here's the alert_XE.log
Fri Aug 10 15:30:59 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 41943040
__large_pool_size = 0
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 96468992
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
PMON started with pid=2, OS id=7328
PSP0 started with pid=3, OS id=7330
MMAN started with pid=4, OS id=7332
DBW0 started with pid=5, OS id=7334
LGWR started with pid=6, OS id=7336
CKPT started with pid=7, OS id=7338
SMON started with pid=8, OS id=7340
RECO started with pid=9, OS id=7342
CJQ0 started with pid=10, OS id=7344
MMON started with pid=11, OS id=7348
MMNL started with pid=12, OS id=7350
Fri Aug 10 15:31:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Aug 10 15:31:01 2007
ALTER DATABASE MOUNT
Fri Aug 10 15:31:01 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Aug 10 15:31:01 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
and then I open the SQL* plus and type some command
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 10 15:32:38 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL> select status from v$instance
2 ;
STATUS
STARTED
But I'm still cannot accessed my "http://localhost:6000/apex". Are there any possibilities that my browser block it? or I need to change the port?
Thx a lot for your help
Regards,
Rudi Sadria

Differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform

Hello,
J would like to know if there are some differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform.
I know that there are some differences on Oracle 8i Parallel Server and i know that some products are not include like precompiler (Mod*Ada, Pro*FORTRAN) on a Linux Platform.
Thank you.

We have installed Oracle 8i on Solaris 8 and it had a great performance, of course that the hardware and licence invested here was costed my the office where i work. Personaly i'd installed linux reh hat 8 and oracle 8i, imagine that, it could be implemented by any individual that has the time to do so.
By buyinng from a company that has a good background you could be sure that you will have support.
Bottom line, if you have the $ to buy great hardware go for a unix platform. But if you don't a Red Hat Linux Server Licence with a 1 year sopport and Oracle data base is about 3500Dls.
Visit www.red-hat.com
Rewards... Bye

How to install Oracle9iAS and Oracle Portal

Can anyone help me to install Oracle9iAS and Oracle Portal?
In which order must they be installed?
Are there important things to do before the isntalling?
Or does anyone know where to find clear documentation for the installation?
thanks

Portal is installed as part of the 9iAS install.
You can find the Installation Guide online at http://otn.oracle.com/products/ias/. Choose the Documentation tab. Select your platform (Solaris, NT, etc.), and click HTML or PDF and you'll have the docs you need for installing 9lAS and Portal with default configuration.
For more info on custom configuring portal, go to http://technet.oracle.com/products/iportal/. There is a section on the page called Configure 9iAS Portal that has links to all the available configuration documentation.
Best,
Jay

Zone setup in solaris 10 some problem and doubts

Hi Experts
I have small problem and doubt
If i login to global zone ... "zlogin -C -e @ testzone" how to logout from global zone......
testzone# when i press exit button it is comeing to zone login prompt
zone1 console login: @ ( from Zone login prompt i want to come
back to my normal solaris prompt i tried with pressing "shift+@ "
nothing is happening could you please tell me how to come out from zonelogin prompt ................
one more query after installation we are using " zlogin -C -e testzone "
is it rquire this same login commmand we have to use every time or only one time after installation of zone. we can use
"zlogin testzone " also what is difrrent these two... if you use " zlogin -C -e testzone " then only it will prompt for locale and language settings......
i have seen it is asking for locale setting and language ...... and it is asking only one time but if you use "zlogin testzone" it won't ask any such seetings......( only one time it will ask after the zone configuration)
Thanks
RK

This particular forum is for issues with applications, daemons
and applets that provide reports to you about a system state or condition.
Sun Remote Servies and Net Connect, are some of those reporting services
that you would subscribe to from Sun Support.
This is NOT a forum for you to report about an issue.
None of your postings, thus far, are within the scope of this particular forum.
For example, this latest thread would be better suited in the forum for Solaris Zones.
Put some planning into your posts and place each one into its appropriate place.

Solaris 8 SNMP daemon and Oracle mib ?

Similar Messages

Maybe you are looking for