Solaris 8 X86 gets stuck

I have installed Solaris 8 X86 on my hard disk. Once it restarted, and since then, it just gets stuck at any time. Some times while checking components, some times while starting serv ices, and even once i am simply typing!
What can it be?
Everything in the instalation is default.
The motherboard is an AOPEN MX36LE-UN with a Celeron 1.1 procesor and 128 Mb RAM.

Press ESC during the boot process and enter the DCA. Remove any generic components listed - what I mean is anything that is not properly identified. Is there an onboard NIC by any chance? From the posts on the forum - there is sometimes a problem with power management. I am not fluent with researching the logfiles so you may want to search the documentation and forum about logging and what is logged where. Download and install the patch cluster and see if that helps.
Lee

Similar Messages

The deployment process seems to die or get stuck, iAS 6 SP3 for Solaris 8?

When I deploy my application in iAS 6 SP3 for Solaris 8 the deployment process seems to die or get stuck. In the shell window i get the messages
iasdeploy for iPlanet Application Server 6.0 SP3
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
sstu15:null
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
After this nothing happens for a really long time.
When starting the deployment I get in the beginning of kas.log two entries
ADMIN-168: kas> deployment get log ''J2EEInstallEar''
GDS-007: finished a registry load
but suddenly the second line disappears and the only message I get is the first entry. I need to break the deployment process and kill the processes manually.
When starting the application server I get two error messages:
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
iPlanet Administrative Server
Version 6.0 SP3, Build 20010704
Copyright (c) 1996-1997 KIVA Software Corporation.
Copyright (c) 1998-1999 Netscape Communications Corporation.
Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp
. All rights reserved.
Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
[14/Feb/2002 11:02:12:7] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
[14/Feb/2002 11:03:08:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
I think all processes starts OK, I get one for .kas and one for kas, one for .kxs and one for kxs and finally one for .kjs and one for kjs.
Is someone familiar with this/these problem(s)?

It seems you are deploying a very big application. Try to deploy this application with following command
j2eeappreg <filename>
It should work fine. It was a bug with iasdeploy command in iAS SP3 which had been fixed in iAS SP4.

Where can I get Oracle for solaris x86

Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null

Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null

USB Printer queue gets stuck - SRSS 4.2, SRWC 2.2, SRVC 1.1, VMware View 4

Hi,
My environment is VMware vSphere 4 with a few ESX 4 servers. On that, I have a vCenter, a View 4 server and SRSS. Then I have a number of Windows XP desktops.
When the user logs into his/her desktop via the Sun Ray, everything works including the local USB printer (an HP laserjet). But...you can only print once...then the print queue stays at "Printing" and won't go away. Any further print jobs just get queued up. It also won't let you delete the print job from the queue. The first print job actually does come out on the printer, but doesn't disappear from the XP's print queue.
Any ideas?
Jim

I can duplicate the "white screen of death" with Early Access to vmware view, with Rays running from Solaris/x86. This is in fact not vmware-specific, as I can hang uttsc to an ordinary XP system. To duplicate fairly reliably, I run a Flash example and then "start -> logoff". uttsc doesn't terminate, and truss shows repeated
/1: pollsys(0x08046690, 2, 0x08046728, 0x00000000) = 0
/1: ioctl(10, AUDIO_GETINFO, 0x08046620) =0
This doesn't happen if the IE window is terminated before logout. The behavior appears to be independent of "-F off" in uttsc (but I'm using the Ray audio driver).
Is there a workaround (other than downgrading) in the vmware view scenario?
Edited by: grommit on Aug 5, 2009 7:37 AM

Oracle 8.1.5 Client/WLS/Solaris x86

has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

This will not work. We have not built the native libraries to work with
Solaris on Intel..
I suggest trying the platform independent type 4 JDBC driver available for
free from Oracle. It is supported (as is any JDBC driver) with WebLogic
Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Dean Davis" <[email protected]> wrote in message
news:3a267487$[email protected]..
has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
greatly appreciated.thanks.

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
 at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
 at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
 at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
 at oracle.net.ca.InitialSetup.<init>(Unknown Source)
 at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000 /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000 /lib/libthread.so.1
0xfefd0000 /lib/libdl.so.1
0xfeed0000 /lib/libc.so.1
0xfea00000 /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000 /usr/lib/libCrun.so.1
0xfee50000 /lib/libsocket.so.1
0xfedc0000 /lib/libnsl.so.1
0xfeda0000 /lib/libm.so.1
0xfeeb0000 /usr/lib/libsched.so.1
0xfe9a0000 /lib/libm.so.2
0xfed50000 /lib/libscf.so.1
0xfe980000 /lib/libdoor.so.1
0xfe960000 /lib/libuutil.so.1
0xfe940000 /lib/libmd5.so.1
0xfe920000 /lib/libmp.so.2
0xfe8e0000 /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000 /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000 /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000 /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000 /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000 /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000 /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000 /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000 /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000 /usr/dt/lib/libXm.so.4
0xf0cf0000 /usr/openwin/lib/libXt.so.4
0xf0cc0000 /usr/openwin/lib/libXext.so.0
0xf1890000 /usr/openwin/lib/libXtst.so.1
0xf0c30000 /usr/openwin/lib/libX11.so.4
0xf0be0000 /usr/openwin/lib/libdps.so.5
0xf0a90000 /usr/openwin/lib/libSM.so.6
0xf0a70000 /usr/openwin/lib/libICE.so.6
0xf0a30000 /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000 /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000 /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000 /lib/libkstat.so.1
0xefc40000 /lib/libgen.so.1
0xefc20000 /lib/librt.so.1
0xefbf0000 /lib/libaio.so.1
0xefbd0000 /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1 localhost.localdomain localhost
#192.168.100.1 bt.lan.home bt
#192.168.100.5 jacek.lan.home jacek
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

From 7.3 on NT to 8 on Solaris x86?

Has Oracle ported Oracle8 for Solaris x86?

Hi,
usually I expect people to do a little research and I do not give everything chewed.
Point 4:
go to the
Oracle9i Database Migration Release 2 (9.2)
go to the chapter 3
Upgrading a Database to the New Oracle9i Release
go to the point:
Upgrade the Database Manually
Exactly from here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200
Keep in mind
1) that the EXACT procedure you are following it is not indicated in this manual
2) you have to think a little ( do you have all the windows services created on the destination system? if not, you have to create them ... )
3) this procedure is not supported by SAP. It is a valid option but not supported by them. You have to practice until you get all the points correctly

Solaris x86 or Solaris 8

What is the latest version of solaris on intel called? Is it generic
across intel boards? Are there some pitfalls to look out for (i.e.
only runs on 400 MHz or less, only a handfull of graphic cards, etc.)
What is the best C/C++ compiler? Does it support Visual Workshop?
How about Motif? What version? We were using Motif 1.2.4 on X11R5
from ICS, is this OK? Any heads up would be helpful. Thanks in advance.

Solaris 8 is currently available at
http://www.sun.com/software/solaris/binaries/index.html
Not sure what you mean by "generic across intel boards" - it's the
same kernel, but drivers will differ depending on your H/W config -
see the HArdware Compatibility list:
http://soldc.sun.com/support/drivers/hcl/index.html
There are freeware e.g. GNU compilers - go to sunfreeware.com
For serious commercial development, the Sun Workshop tools are
available - Workshop 5 is shipping now and you can get a WS6 early access at the access1.sun.com website.
CDE seems to have taken over from Motif. For details on X11R6 features etc, follow the first link below:
- www.sun.com/solaris
- www.sun.com/intel (For Solaris on the Intel Platform)
- www.sunfreeware.com (take a look at the "Other Useful Sites")
- www.egroups.com (do a search on Solaris, many questions already answered)
- Newsgroups (alt.solaris.x86, comp.unix.solaris)
- www.webring.org/cgi-bin/webring?ring=solarisunix;list
- www.SolarisCentral.org
- metalab.unc.edu/pub/packages/solaris/i86pc/
- http://solarisguide.com
- dan.carlsbad.ca.us/faqs/s86faq.html
- solarisguide.com
- http://fishbutt.fiver.net
- http://www.sunhelp.org/

Solaris x86 on HP pavilion laptop

I am trying to install solaris x86 version on my pavilion zt1000. The solaris install cd boots and then crashes with the following "boot panic: trap type 0 error 0 at 13bd7f" and bunch of register information.
I have tried 3 different CDs and even tried creating a bootable floppy disk. The floppy disk booting just hangs at the solaris boot manager screen.
Any ideas ???
To start with can solaris be installed on a HP pavilion
Thanks for any info anybody can provide.
Sriram

I do remember that everyone who installed on a laptop had to use an external keyboard during the installation. While I dont have any info specific to the HP, search the forum for past laptop posts - someone has probably had a similar issue and take a look at these pages.
http://www.bolthole.com/solaris/x86-laptops.html
http://www.lifamily.org/solaris/x86-laptops.html
http://home.t-online.de/home/hburde/laptop.html
http://www.xig.com/Pages/Atop/LaptopStatusListsSummit/ShouldWorkLaptops-2.html
I'm confident you can get it done!
Lee

Solaris x86 with card on-board

Hi all,
I got a problem when installing Solaris9 x86 on ibm NetVista Machine.
I have installed 2 other machines with separated network card sucessfully. I can configure to connecto to my LAN network.
But when install on 2 ibm NetVista machines (which include onboard network card ), It is fail to be configured to connect to the network in both following cases:
Case 1: I choose proper driver as Sun suggest for Intel VE Pro(R) 10/100 : iprb. And the Solaris detect successfully. I checked by "ifconfig -a" and saw the network card active on "iprb0".
Next, I following correct instructions to configure the network card to connect to the LAN. But when i ping IP (9.187.186.18) to other computer in our same subnet LAN,
The system display eg: "No anwer from 9.187.186.18"
I run the "snoop" command to view broadcasr ARP in an other terminal. The snoop terminal displays ARP signal boradcasting from the Solaris. However, it can nerver get ARPs from other computer in LAN.
Case 2: I add 3COM network driver to the solaris ( onboard card is no loger used ). The system can auto-detected this card and i can configure to connect to the network. The problem remain unchange.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular configuarion for on-board network card. ???
Can any boy help me to solve this problem ??
Best regards,
Thang,
Vietsoftware Developer

However, it can nerver get ARPs from other computer in LAN.Are you perhaps running "snoop" on a box different from the one that you're trying to ping, and are you using
a switched ethernet? In that case it would be OK if you only see the ARP broadcast, because the ping target
box will send the ARP reply directly to the MAC of the requesting station (i.e. there's no ARP broadcast reply),
and an ethernet switch will send the ARP reply directly to the port where the station with the given destination
MAC is connected - no other port should see the reply.
If you're trying to ping 9.187.186.18 from the new Solaris x86 box, try to run snoop on the 9.187.186.18
system. 9.187.186.18 should see the ARP broadcast from the LAN, and the 9.187.186.18 box should list the
ARP response it sends back to the LAN.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular
configuarion for on-board network card. ???I guess the interrupt handler for the NIC is not working, so the Solaris x86 sees no incomming packets.
See the "troubleshooting" section on the following page:
http://solaris-x86.org/documents/tutorials/rtls.mhtml

10.1.3.3 release on Solaris x86

Hi guy's,
Anyone know when the 6148874 patchset (10.1.3.3) will be available for Solaris (x86)?
Thanks.

Not sure if you already figured this out, my reply isn't exactly timely.
Had the same issue with Windows XP, we resolved by turning off cell animations for Excel. Can do by adding HKCU - Software - Microsoft - Office - Version # - Excel - Options, add DWORD Options95=1
This fixed the slow scrolling issue for us, as well as an issue where sessions would get disconnected back to the VDI log in screen when trying to scroll around or delete big chunks of rows

Support for JRockit for WebLogic 10.3 in Solaris x86

Hi All,
I am trying to install JRockit Mission Control 3.1.2 in a Solaris 10 x86 platform.
For Solaris Spark I know there is a special distribution.. For Solaris 10 x86 I am trying to install the generic linux version.
When I try to install the jrmc-3.1.2-1.6.0-linux-ia32.bin I get the following error:
jrmc-3.1.2-1.6.0: Cannot find /lib/ld-linux.so.2
I also try with 64bit edition of the jrockit mission Control but I get a similar error but trying to find the /lib64/ld-linux.so.2.
Is Solaris 10 x86 supported? Or at least, is there a workaround to install it?
I find some site talking about JRockit for Solaris Spark, but seems to me that Solaris x86 is not supported...
Thanks in advance
Pablo

Hi,
The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
java weblogic.DDConverter -d NewDDs jamagent.war
Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Need to install ORACLE 9i on solaris x86

Hi All,
Can anyone tell me where I can get DB Oracle 9i for Solaris x86?
If not, what can I use?
Thanks.
Marfy

Unfortunately no chance. 9i was never supported on Solaris x86 and is desupported now on all other platforms. Use 10gR2 instead.
Werner

Connect to Oracle database from Perl on Solaris x86

Hi,
How can I connect to Oracle database using Perl scripts on Solaris x86. It seems that DBD-Oracle Perl module requires Oracle client installed to work. Is there any Oracle client available for Solaris x86? Any one got a workaround? Thanks.
Angus Lee

Yes, you absolutely must have some portions of the rdbms installed before you can proceed. If your Solaris x86 machine is only a client, then you can get away with installing just ?/rdbms/mesg and ?/rdbms/lib.
I have Oracle 7.3.4, 8.0.5, 8.0.6, and 8.1.6 for Intel Solaris 2.6. I don't know if they'll run on Solaris 8 or 9 but I'm trying to upgrade at this very moment. As long as you conform to Oracle developer license, then you may download them from my machine.
I believe the reason Oracle dropped their Intel Solaris port is probably because Sun went through a period where they themselves dropped their Intel port. They've picked back up and if enough Oracle on Intel Solaris customers scream, then Oracle might pick it back up again too.
Send me an email if you're interested in the downloads.

Oracle for Solaris X86

I would like to know where I can download the latest version of orace for the solaris on Intel os.
I have searched oracle and cannot seem to find it.
Any suggestions.

Besides click the ContactOTN in web page to submit the question
about this to them, I follow the link
http://platforms.oracle.com/sun/index_sun.htm and click "Ask Us"
link to send message to them too.
Am I wrong ? Can you give me the correct way to ask the question
KK
jeamaro (guest) wrote:
: KK (guest) wrote:
: : I read through the news group and find some mention there is
: : a version Oracle for solaris x86. Then I go to
: : http://platforms.oracle.com/sun/index_sun.htm too.
: : Can anyone tell me the straight method to get it ?
: : I have already sent several mail to ask about that.
: : There is nothing return.
: : KK
: There is a version of Oracle for Solaris x86. Although it has
: not been available thru OTN. To which email ID have you been
: sending your questions?
: Regards
null

Solaris 8 X86 gets stuck

Similar Messages

Maybe you are looking for