Solaris 9 and Updatemanager install problems

I recently installed the Sun Connection on a Solaris 9 setup. I had to load JDK 1.5.0_12 packages and then install the Sun Connection products.
I was able to finally see that "updatemanager" is present. It worked great. It accepted by contract information. I tried to load five security patches including a kernel patch. It worked. After the reboot however, the updatemanager GUI only reports the dialog box "unknown subcommand getdocument". While it invokes, it no longer has information. I have experimented with JAVA settings and path statements. What can I do next?
The install was downloaded from a Sun site and it says Sun Connection Update Manager v1.0.10 - 22 August 2007 from the README. What can be done to get "updatemanager" to invoke again and not abort so early in the analysis?

Are they going to put out a patch to fix what they broke?
I have the same issue. Got to love the lack of QA. At least I'm very used to it after a couple years. :-)
--Jeff

Similar Messages

Primairy IDE and Windows Install Problems!

Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
I orderd all my stuff from newegg.. I got:
Intel 775 Socket 2.8ghz Prescott
ECS Mobo (psh model)
2x 512mb DDR 3200
Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
Chaintech GeForce 6600 GT video card
Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
Aspire-X Dreamer II Case
Rosewell DVD/CD-RW combo (very cheap).
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet ".
When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
What the hell?
I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
Has anyone else had any errors like this? Thanks - Erik

you skiped the part about him buying the msi board.
Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem. I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

AshTray and Bluetooth install problems

Was trying to install some old games on my ideapad S10e and somehow resorted to using AshTray custom resolution app (used with eeepc to help run certain games).. well to cut a long story short.. Dont use this app i was able to play a game (diablo2) but it changed all the default resolutions. In the end there was no way i could go back to the native resolution so i had to opt for first time pressing the F11 Recovery button.. took a little while but it did complete the process with fresh factory settings and rez back to normal. Then after that i check my device manager and it said that the bluetooth device wasnt installed. Strange cos everthing else was installed ok. I downloaded the bluetooth drivers for my S10e and clicked install.. it looked like it installed but for the life of me i still couldnt figure out why bluetooth was still yellow in device manager. Well just as i started writing this i figured it out if anyone else comes upon this problem (noob trap). Basically the BT drivers are "extracted" to C:\DRIVERS\WIN\BTW\54bl03ww and you need to run the setup.exe then it installs properly. I know im a noob but i would of thought it installed automatically like all the other device drivers. Quite impressed by the recovery mode appart from the BT hiccup it worked as good as i would expect.
oh well Panic over S10e is back to normal

Now the email began to work again:mansurprised:
Still having problems with bluetooth handsfree device: E 75 doesnt even ask passwords when I try to connect bluetooth handsfree and cant establish connection with voice devices. Bluetooth still works fine with my laptop or other phones! Does anyone have solutions?

InDesign CS6 uninstall and re-install problems

Okay. I had a project to work on for a class I'm in and wanted to open Indesign CS6 on my computer but I kept getting crash reports and the program would not open. So.... I desided to uninstall it and re-install it figuring it is still part of my on-going cloud membership here, but now the program is not listed...so ... how do I get it back???

Hi, Thanks for this link, but it does not help. I was a creative cloud
member when the CS6 software first came out and so.that was how I came to
have the CS6 InDesign. So....I have no serial number. And yes, I do have
InDesignCC now, but I want to work on my project in a college classroom
that only has CS6 on the computers...and so I want to use it at home to
transport back and forth and without saving to CS4-level.

Solaris 8 and sys-unconfig problem

I have an older Solaris 8 E450 machine that I wanted to rejoin to a different domain etc...so I used sys-unconfig but now am experiencing major problems! I need some help;
What happened was after the machine rebooted, it prompted that it was discovering the network then came to the Solaris Installation screen but with garbed options. I could make out "F2 to continue" tried to hit it to continue but the terminal keyboard was locked. After waiting about 15 minutes with no change in system state, I rebooted.
Now when the machine boots I get as far as Sun Copyright info, then get the message "INIT: Cannot create /var/adm/utmpx" then the text runs off the right hand side of the screen and the machine 'stops'. The only way to get back to the ok prompt is to 'break'. I am a relative newbie to Solaris so any and all help would be GREATLY appreciated, I really do not want to re-install...
Thanks in advance!
Ernie

On some systems, especially if you are using a VT you have to press and hold esc&2 before it will proceed, but regardless of this, my advice would be to
1) boot in single user mode (ok>boot -s)
2) cd /etc (#cd /etc)
3) rm ./hostname.<interface> (eg hostanem.hme0)
4) reboot
You should now have a system that has started without network traffic. Change all relevant netwokr files (/etc/hosts, /etc/netmasks) and you can now config a new device. To do this just vi the /etc/hostname.<interface> (as above) and enter a hostname, add this hostname to your /etc/hosts file and remember to put the tab betweeen entries, and reboot again, should be cool.

Solaris 8 4/01 Install Problem on Compaq Deskpro

Howdy,
I am trying to install Solaris 8 4/01 on a Compaq Deskpro 6000 but I am having a problem at the reboot phase. The instructions indicate that I need to eject the Install CD after the system resets and before the memory test/HW detection phase. My question is, how do I know when this occurs...there is no screen output to tell me when this is happening. Also, The system seems to hang on reboot on a Compaq Logo screen with the hourglass just sitting there doing nothing.
Any help would be greatly appreciated.
Thanks
Dennis

Dennis,
The installation program should tell you when it is going to restart the system. You will be asked to 'press any key/enter to continue."
Immediately when your system is restarted, remove any CDs from your drives.
If your system is hanging while it is showing the Compaq logo, trying pressing the 'ESC' key so that you can see what is actually going on.
I hope this helps.
Allen
Sun Developer Support

Patch 10 and 11 Install Problems

My application worked very successfully, using the servlet with all patches up to and including 9 using the 1.1 Jinitiator versions. I wanted to look at the time zone features and applied patch 10, and then 11. The servlet test appears to work in the new patches 10 and 11.
Using the latest 1.1 Jinitiator in either patch 10 and 11, I get "92102 - Negative or zero content-length" when starting the application. Does anyone know what this means, and/or what cures the problem?
Using the 1.3 JInitiator, I get "frm-92150 Web Client Version too New" I have not seen this one before either and scant reference to it - only on Solaris - with solutions not applicable to Windows 2000. Again any ideas are welcome.
Many thanks,

It's worth clearing the JInitator Cache to try and get rid of the Client too New message. The other error is due to a problem in the contents of the HTTP header - We've only seen that with IE on Mac and the Apple MRJ in the past - double check that you are using the correct Jinit 1.1 version for those patches.
If clearing the cache does not fix the client too new then try with one of the other JARS e.g f60all rather than f60all_jinit. It may be that the JARs are out of sync with the Server - for instance if something had one of the JARs open when you installed so it was not overwritten with the new version.

Itunes and quicktime install problem

I have just bought an ipod classic. went to apple.com, downloaded latest version of itunes, on the install i get an error saying some of the quicktime software is out of date to fix this problem by upgrading click 'Go there now'
unfortunately it doesn't go anywhere!
itunes will not start because of this either, it says it has a problem and needs to close.
I have tried installing older versions of itunes,Quicktime;un-installing,re-installing,installing seperately, from different sites as well as apple, butit ends up the same.
im only running windows firewall and AVG anti virus.
can anyone help me as to why i can't install them especially Quicktime as it seems i need that for itunes and i need itunes to load the ipod!
Please help if you have any ideas, i've been trying now for 5 hours!!!!

Try installing from here:
http://www.filehippo.com/downloadquicktimeplayer/
If that doesn't work, try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
http://support.microsoft.com/kb/290301
Make sure it's a new and fresh download from:
http://www.apple.com/itunes/download/

Win2K and WinXP Install problems on ms6337le5

Hi,
I've had a Ms6337le5 motherboard for a while now and have been using Windows 98. I got sick of Windows 98 crashing every two seconds so i decided to go with Windows 2000 or XP, but to my surprise, both of them WILL NOT install. It says it cant read driver.cab off the cd, but the cd is brand new, i even tried a mates cd and it had the same problem.
I have the latest Bios for my mainboard (7.3) and the latest intel INF driver installed also. I actually did succeed once in getting Windows 2000 to work but then everytime i tried to access a CD my whole computer would crash.
This has been a problem for a while and i was wondering if anyone could help?
My system specs are:
Intel Tualatin 1.2ghz
512mb SDRAM
20gb Hard Drive
MS6337LE5 Mainboard
Soundblaster Live! 5.1 Gamer soundcard
Geforce 4 TI 4200
Aopen 16/48 DVD Drive
Acer 24/10/32 burner
Direct X 9b
Thanks,
Razor.

http://www.msi.com.tw/program/support/manual/mnu/spt_mnu_detail.php?UID=267
http://www.aida32.hu/aida32.php
one of them should tell you

HP ProLiant DL360 G4 Solaris 8 x86 Intel Install Problem

For some reason, solaris 8 does not see the disk, constantly get an error of No Disk, make sure its cabled and powered on. Right now , win 2003 server is installed and runs fine. Any ideas on how to get this working? It appears maybe a driver isnt installed.

Ok, here is the process. the solaris version is 8, date is 7/01
I boot up with the install cd 1 of 2.
View image: 1
Booting up here
View image: 2
From here, I choose F4 Add Driver
View image: 3
I insert the DU diskette and choose continue
View image: 4
Driver loading up into memory
View image: 5
DU Diskette removed and hit continue (Also kept it in just in case, but with same negative results)
View image: 6
Driver appears to be loaded in memory, chose continue
View image: 7
System scan started
View image: 8
Scan complete, chose continue
View image: 9
Error, Missing primary disk. Chose continue
View image: 10
Boot device selection screen
View image: 11
If disk is chosen, ERROR Cannot mount, so CD ROM is chosen instead.
View image: 12
Installation starts
View image: 13
Interactive install chosen as per HP, hangs at this screen for about 20 min, then the server reboots and the process starts all over again.
View image: 14

Solaris 10 Companion Disk Install Problem

Hi All,
Trying to add a few things to a Solaris 10 (Sparc) install, from the
Software Compainion disk. When I go through the install, either GUI
or texted based it will fail in the end. If you look at the last part
of the text below you can you can see I have selected the packages,
then agreed to the license, next it acts like it going to install but
stop and reports nothing installed.
Next you can select 4 to be "Done" or 1-3 to view log.
Log states following:
/var/sadm/install/logs/Desktop-Environment_install.B02081004 does not
exist
I only selected one of the logs to view that time through, but the
other installs would have the same error, something like:
/var/sadm/install/logs/X-Applications_install.B02080955 does not exist
/var/sadm/install/logs/Application-Utilities_install.B02080955 does not
exist
I have plenty of disk space, 12GB free on /opt and 14GB free on / and
16GB on /usr.
I have the boxed set of Solaris 10 disk, but I have even downloaded
another disk image thinking my disk was some how bad, still same
results.
Any ideas on what is going on?
Thanks
Joe
==================================================================
Select the type of installation you want for each product.
No Install Default Install Custom Install Product
0. [X] [ ] [ ]
Application/Accessibility
1. [X] [ ] [ ] Application/Editors
2. [X] [ ] [ ]
Application/Networking
3. [X] [ ] [ ]
Application/Publishing
4. [X] [ ] [ ]
Application/Utilities
5. [ ] [ ] [X] Desktop/Environment
6. [X] [ ] [ ]
Development/Languages
7. [X] [ ] [ ]
Development/Libraries
8. [X] [ ] [ ] Development/Tools
9. [X] [ ] [ ] System/Daemons
10. [ ] [ ] [X] X/Applications
11. [ ] [ ] [X] X/Window Managers
12. Done
Enter the number next to the product you wish to change. Select
"Done" when
finished [12]:
Desktop/Environment components showing a checked box will be installed:
[X] 1 KDE - X11 Windowing Environment, v3.1.1
[X] 2 KOffice - The KDE Office Suite, v1.2.1
[X] 3 XFce - The XFce Desktop Environment, v3.8.16
To check a particular component, enter its number, or 0 when you are
finished [0]:
X/Applications components showing a checked box will be installed:
[X] 1 asclock - the AfterStep clock, v1.0
[X] 2 gimp - GNU Image Manipulation Program, v1.2.1
[X] 3 rxvt - ouR eXtended Virtual Terminal, v2.7.10
[X] 4 sane - Scanner Applications, v1.0.12
[X] 5 stardic - Star Dictionary online translation tool, v1.3.1
[X] 6 vnc - Virtual Network Computing, v3.3.7
[X] 7 xcpustate - display CPU states and statistics, v2.5
[X] 8 xmcd - Motif CD Audio Player, v3.2.1
[X] 9 xmms - X MultiMedia System, v1.2.10
[X] 10 xterm - Terminal emulator for X Windows, v196
To check a particular component, enter its number, or 0 when you are
finished [0]:
X/Window Managers components showing a checked box will be installed:
[X] 1 afterstep - X11 window manager, v1.8.8
[X] 2 fvwm - X11 virtual window manager, v2.4.3
[X] 3 WindowMaker - X11 Window Manager, v0.80.2
To check a particular component, enter its number, or 0 when you are
finished [0]:
Checking disk space.
The following items will be installed:
Product: Desktop/Environment
Location: /opt
Size: 615.3 MB
Product: X/Applications
Location: /opt
Size: 43.81 MB
Product: X/Window Managers
Location: /opt
Size: 13.92 MB
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1]?
YOU MUST OBSERVE ANY AUTHORS' CONDITIONS WITH RESPECT TO
INDIVIDUAL COMPONENTS PROVIDED WITHIN THIS CODE. SUPPORT
FOR THE TECHNOLOGIES AND DOCUMENTATION IS NOT PROVIDED
BY SUN MICROSYSTEMS, INC.
THE TECHNOLOGIES AND DOCUMENTATION ARE PROVIDED "AS IS"
WITHOUT TECHNICAL SUPPORT OR WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
Enter 'y' to accept the license agreement. Enter 'n' to decline the
license
agreement and exit the install.y
Installing Desktop/Environment
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing X/Applications
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installing X/Window Managers
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation details:
Product Result More Info
1. Desktop/Environment Not Installed Available
2. X/Applications Not Installed Available
3. X/Window Managers Not Installed Available
4. Done
Enter the number corresponding to the desired selection for more
information, or enter 4 to continue [4]: 1
/var/sadm/install/logs/Desktop-Environment_install.B02081004 does not
exist
Failed:
Log file:
/var/sadm/install/logs/Desktop-Environment_install.B02081004
Product Result More Info
1. Desktop/Environment Not Installed Available
2. X/Applications Not Installed Available
3. X/Window Managers Not Installed Available
4. Done
Enter the number corresponding to the desired selection for more
information, or enter 4 to continue [4]:
-bash-3.00#

Hi Joe,
If you cd into the cdrom from command line:
# cd /cdrom/cdrom0
# ls
you should see some kind of structure to how the the packages are laid out on the disk.
Use pkgadd on one or more package:
# pkgadd -d . <package_name>
You will get more output this way.
HTH
Tom

Sound Driver and Driver Installment Problems

I have been having trouble trying to get my sound driver to work on my
MacBook Pro in Windows XP. After updating my MacBook with all it current
upgrades, I loaded up Bootcamp to install Windows XP now, I have followed
all the instructions in the guide and have succefully installed Windows XP but,
when I run Windows and start to install the Drivers from my Mac unto
Windows, close to the end I get a message that it could not finish properly.
Now, I find that all runs well except an important thing like my sound. I go
into the sounds control menue to see if there is a driver and as i suspect
nothing. I also check for my network and nothing and same for my eject
button, that doesnt work either. Please if someone can assist me on this
problem it would be much apprecitated and that way I can use my music
programs which I have not been able to use.

Your question has nothing to do with the installation of OS X. Post it in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

Win2k3 64 x86 and Appex instalation problems (missing OHS on companion CD)

Oracle guys,
I do understand that Windows is not preffered OS for Oracle...but most of us Oracle people have laptops and on them Windows OS (from Win2k, Win XP, Win2k3, Win2k364...tomorrow maybe Vista).
 So we, with new 64 bit CPU, would like to use all the potential of the hardware. I do not want to describe why 2k3 is very stable and secure platform...but after Win2k this is one of the most complete OS from MS (IMHO).
 So, please give us a note what to do if we want to use Win2k3 64 server x86 version and Oracle10gR2 64 for x86 and want to develop Appex on this database.
 Missing point is OHS (it is not on companion CD)-so any suggestion what to do is appresciated (If standalone Appache is solution please let us know which version would suite best...and do we have to install "mod" parts...
 P.S.
 I know that Win2k3 64 bit and Oracle WinNT32 is not recommended combination (I have some listener problems so I decided to quit this combination)...so I'm exploring Oracle 64 bit usage-but now I'm stucked!
 P.S. II
 I have put this question on Appex group but no reply at all (some other users have joined me in questioning this). So please if this is not the right place, could you lead me where to post this topic?
 THX!

How about installing HTTP server as Oracle Application Server 10g. Even if it is not supported it may work since this is just for development on your laptop.
Alternatively install Database XE which comes with Apex 2.1 ( but not the latest version 2.2).
I have just hit the same problem. I have installed database and companion 10 R2 10.2.0.1.0 with patch 4547918 to 10.2.0.2 on my MS WIN x86 64 bit laptop. I wanted to install Apex 2.2 on top but have no HTTP server. Thanks for pointing out the release notes.
The getting stated page of the documentation on the companion cd states you can install the following 2 installation types:
* Oracle Database 10g Products: Includes Oracle Database Examples, natively compiled Java libraries for Oracle JVM and Oracle interMedia, and knowledge bases for Oracle Text.
* Oracle Database 10g Companion Products: Includes Oracle HTTP Server, Oracle Workflow, and Oracle HTML DB.
But as we have found you can only install Products not Companion Products on 10g Release 2 (10.2) for Microsoft Windows(x64).

KT4 Ultra MS-6590 and XP-Install problems

hi,
yesterday i got my KT4 Ultra (MS-6590) motherboard with XP2700+ and 1x512MB PC333.
I tried to installed on my 80GB HDD (samsung) windows XP Pro.
But i cant. i get often an error when the first files are copied (after CD-boot): " File xxxxx is damaged. istall is stopped"
or i get a blue screen IRQL_NOT_LESS_OR_EQUAL
i deactiveted in Bios EVERYTHING what has to do with caching.
then install runs (i must wait many houres :O ) and after the final reboot i had the welcome screen and after a few minutes a get the system beep and a reboot.
why?
why can i not install my XP like other people..
what is the problem?
i dont made a bios update yet.
Please help... THANKS

Thank you for you help
i searched on the german MSI Homepage http://www.msi-computer.de for the BIOS update (i am german ) and i only find version 1.2.
should it work with this version? or is the bug fixed only in 1.3?
where can i download version 1.3 (compatible with german boards too or is there no different?)
i have a award bios and on the official HP seems that there are only AMI Bios.
Version 1.2 (AMI)

Wireless Mouse and Keyboard Install Problem

I am trying to install my wireless keyboard and mouse onto my Mac OS X 10.3.9. My dad had this computer before me and had the mouse and keyboard paired and working. After it was shipped to me, I attempted to pair these again with no luck. THe bluetooth won't recognize either and if i try and run the KeyboardandMouse.pkg as instructed, the icon simply isn't there when I insert the disk. I've attempted to pair using the system preferences, but it cannot locate either the keyboard and mouse. Yes, I do have new batteries installed and the lights do blink when switched on. Any help is appreciated. Thanks.

Hello again:
Try trashing the BT preference file (com.apple.bluetooth.plist) and restarting.
If that does not work (although it will take you a bit of time), I think I would try an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Barry

Solaris 9 and Updatemanager install problems

Similar Messages

Maybe you are looking for