Solaris 9 installation "misleads" into mount drives-error -- please help -
hi out there - masters of the using of Solaris 9 ...
whenever I try to install the program onto any harddisk after loading drivers the installation program tells me that not even one of the harddisks can be mounted ... well I have 3 harddisks & 1 combo-drive with Windows Millenium on C: Windows XP Home on the first and second harddisk + smaller disk for pagefile.sys on the second IDE
- there is just one error message at the beginning of loading drivers (one system device is being added twice -- controller or something as I can remember - once as a Non-acpi and secondly as ACPI-device - but I could change nothing here)
- please help -- I would be very glad if you would help me install from my 4 Cd-roms
thanks in advance
Try to boot from the "Software 1 of 2" CD, not the "Installation" CD.
Maybe the good old installation method works better on your system than the new webstart installer.
Similar Messages
-
Minisap Installation error Please help
Hi,
I am trying to install Minisap 6.20 on my PC but the installation stops at 91% with the following error
Info: DBR3LICENSECREATE SyCoprocessCreate 2 718
Creating coprocess C:\MiniWAS\saplicense ...
Info: DBR3LICENSECREATE ExecuteDo 2 718
RC code form SyCoprocessWait = -112 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -112.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
There are the things which have already been done
a. MS Loopback adapter has been configured fine
b. 10.10.0.10 <computer name > has been added in the etc\hosts file.
c. Have tried to install the Sap licence manually using SAPLICENSE -Install ( It installs ok)
d. Have tried to resume the installation too many times
f. Have disabled all security features on the PC during installation.
Not sure why this is not working, I had installed the same SW before the format on the PC. For some strange reason this refuses to work and the installation dosent go past 91%. Please help!!!
Thanks,
PoornimaHello Every One,
Thanks for looking into this.
However the problem I solved the problem by myself.
The downloaded file is ok. Hence the md5sum mentioned in my below message is accurate. I created another administrator user in windowsXP and tried to install from that user's login.The installation was successful. And now I can access the database from both the logins (the old and the new).
I hope above will help anyone in future.
Rgds, -
My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.
-
Windows - No Disk Error - Please help!
Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input. -
My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.If you want to just extract the playlists from your iPod, plug it in iTunes. When it appears under devices, right->click on it and choose Export Playlists. Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,
A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete. -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)
Although your message isn't mentioned in the symptoms, let's try the following document with that one:
Apple software on Windows: May see performance issues and blank iTunes Store -
My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.
Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra -
HT201442 I did this but still i am getting the same error , please help me .
I did this but still i am getting the same error , please help me .
<Email Edited by Host>Look at http://support.apple.com/kb/ts4451
Cheers, Tom -
i am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..
Hey alkarim2008,
If you are having an issue with being unable to update or restore your iPhone, I would suggest that you troubleshoot using the steps in this article -
Resolve iOS update and restore errors in iTunes - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L -
hi my iphone is broken. it won't pass the connect to itunes. when i try to restore is says that there is an error. please help!
thanks,
jg2013
<Subject Edited by Host>Hello, 02633.
Thank you for visiting Apple Support Communities.
If your iPhone is disabled, you will need to process the steps in the article below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
Jason H. -
I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them
Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers. -
I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.
I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.
Hi,
I am not sure what the R3271 is, but we have a driver for the R3272 (Spectrum Analyzer with GSM option). Normally API's do not change significantly and so it is very likely that you will be able to use this driver for your application. You can get it by going to www.ni.com/idnet. The easiest way to get the the page is just to seach by vendor.
Hope this helps out.
Aaron K.
Application Engineer
National Instruments
Maybe you are looking for
-
Keeping a running "clone" of my macbook pro. Need advice.
Like most of you, when your business computer goes down, it is painful to get it fixed, deal with downtime and/or reload everything into a new computer. Personally, I prefer laptops and bought my first one back in 1997 (windows based pc, not mac). Th
-
How to view "Location" calendars on iPhone 3.0?
Our iCal server has "Location" calendars (set up with Directory.app) for things like room reservations and "vacation" calendars. These calendars are visible as delegate calendars in iCal only. I can set up my iPhone to view my personal calendar as a
-
Quicktime won't update, itunes won't open...having no luck :(
I'm getting an error message when I try to download the current quicktime. iTunes won't open without it. The error message is below: It says "Could not open key: HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID. Verify th
-
When I start the computer I try to open the safari but it start to reaload over and over, so I turn off the Wi-Fi and after turn on, then start Safari again, and it starts to work again. I believe that is not a problem of RAM because I put 16GB of RA
-
Is it posible for multiple user?
It is possible to to have multiple user in one ipad?