Solaris 9 pkg requirements for SMC
We have purchased SunMC a supported product from Sun MicroSystems and maintenance, but keep getting told that it's only supported with a full system load. A full system load is a huge SECURITY risk in any enterprise environment and loads many packages that are not necessary for the operation of SunMC.
Does anyone know what packages are required to run SunMC on Solaris 9!!! If so, I would like the list of packages required to be able to install and run SunMC in a secure manner.
Thanks to anyone who's able to help me out!!!
We have purchased SunMC a supported product from Sun
MicroSystems and maintenance, but keep getting told
that it's only supported with a full system load. A
full system load is a huge SECURITY risk in any
enterprise environment and loads many packages that
are not necessary for the operation of SunMC. I've heard of people running SunMC with JASS hardening, (and with minor tweaks with products like Keon) but I've never seen a minimal package listing posted anywhere.
It may be quicker to spend a couple hours running the installer repeatedly and adding packages/libraries as the install script aborts and logs the missing package errors (if you're pressed for time). At least then you'd have an absolute minimal list.
I know I'm not really helping :) - I guess you have to weigh the benefits of a comprehensive monitoring solution against the downside of a few more packages (that only make up one of many layers in your overall security architecture).
Regards,
[email protected]
http://www.HalcyonInc.com
Similar Messages
-
What packages are required for an 11.2.0.3 install on Solaris 11?
Where can I find information on which packages are required to install Oracle 11.2.0.3 on Solaris 11?
The documentation only mentions Solaris 10. I tracked down the packages required for Solaris 10, and most of them are either included in the GA release of 11 or obsoleted.
There are however a couple of packages that are missing from the base install of Solaris 11:
SUNWarc (renamed to):
* consolidation/osnet/osnet-incorporation (installed)
* developer/library/lint (missing)
SUNWhea (renamed to):
* consolidation/osnet/osnet-incorporation (installed)
* system/header (misising)
So it looks like developer/library/lint and system/header are packages from required for Solaris 10 that are missing on 11. The installer however doesn't check for any packages whatsoever.
Does that mean it's safe to install the database?
Edited by: 894946 on Nov 21, 2011 8:38 AMHere is list of packages you need in order to install Oracle 11gR2 on Solaris 11:
SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
Some of the above are installed by default which you can find by:
pkginfo -i SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
I believe you will only have to install the following:
pkg install compatibility/packages/SUNWxwplt SUNWarc SUNWhea SUNWxorg-client-programs SUNWxorg-clientlibs
Cheers -
Hardware requirement for Solaris 10
Hi,
Im seeing different requirement for memory when installing Solaris 10, and i was wondering if the following is correct:
Minimum:64
Need for GUI: 256
So is it correct that you can install solaris 10 on a sparc og x86 with 64mb ? i guess it is only text then....
OleHi,
The minimum requirements are:
# Minimum of 256 MB of physical RAM (or 512 MB for PXE booting)
# Minimum of 2 GB of available hard drive space
There are more details available at:
http://www.sun.com/software/solaris/specs.jsp
Take a look at the Hardware Compatability Link at the above link to check if the x86 system that you are using is supported, and what its individual requirements are.
Hope this helps -
Hardware Requirement for Solaris 8 Installation
Hi,
Can anyone give me the hardware requirements for Solaris 8 Installation. I need to install the following patches too..
C++Runtime 108434-12
Linker 109147-21
J2SE Solaris8 (patch cluster)
SUNWxwfnt (X Window System platform fonts)
SUNWilof (ISO-8859-1 (Latin-1) fonts)
Please help.
Regards
AparnaCheck out http://docs.sun.com/app/docs/doc/806-1054 for the HCL for the intel version of Solaris 8.
or http://docs.sun.com/app/docs/doc/806-2221-10 for Sparc hardware. -
Basic Question Solaris SPARC required for 10.2 upgrade from 9.2
We are running Oracle 9.2 releases on Windows and Solaris SPARC 2.6
SUN 450 Dual UltraSparc II
Where can I find system and OS requirements for Solaris for Oracle 10.2
database? I have looked in many different install guides and they all
reference Solaris 10 but don't say whats required.You find this information here:
http://www.oracle.com/technology/support/metalink/index.html
For 10g at least you need Solaris 2.8
Werner -
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
Hardware requirements for Sun - Solaris
I am getting ready for a massive upgrade from 9i to 10g. I was wondering what are the hardware requirements for the management server for 10g..it will be monitoring 30 other servers with 9i / 8i / and 10g databases.
The referenced document refers to two methods of accomplishing the upgrade. One is to use the upgrade utility and the other is to manually execute the upgrade scripts. There is, however, a third way that is much easier and that gives you immediate access to all of the new features of the 10g database.
Both of the methods described in the document, which you should read no matter what you do, perform all of the upgrade changes to the existing database. This is why you cannot go directly from 7.3.4 to 10g. The scripts that are behind the process just will not run successfully in a 7.3.4 database. As a result, you would have to upgrade to 8.0.6 and then to 10g. This is the "supported" path, but you do not have to follow this path to achieve a successful upgrade.
The third upgrade scenario is to create a new 10g database using scripts that you have written that utilize all of the various new features that you would like to use such as locally managed tablespaces and undo management. Once this has been created and tuned up a bit, you would perform an export/import to get your application's code and data from the old database to the new.
In our enterprise, we have over 450 databases, and we just could not afford to take the time to follow the "supported" path. It would have taken too long, and we had only a few days to convert 272 of these with more time for the rest. As a result, we built our own create scripts for the new databases, ran those in advance of our worldwide deployment date, and then we used the export and import tools to move our application code and data. This was a lot easier than the "official" method, and it works.
The advantage to this approach is that it is straightforward and does not involve Oracle's upgrade tools which many have had problems using. The disadvantage is that you really have to know what you are doing. If you are not an experienced DBA, you may not have the wherewithal to successfully execute this method.
Kind regards,
Russ Cannon -
What are the supported Platforms and system requirements for JSE?
What are the supported Platforms and system requirements for JSE?
Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher -
Requirements for SAP Document management system in ECC 5.0
Hi All,
Can any one provide me the requirements for SAP Document management system in ECC 5.0.
SAP Component ECC 5.0
OS Solaris 5.9
DB Oracle 9.2.0.7
Thanks in advance.
Regards,
Surendra
<removed_by_moderator>
Edited by: Juan Reyes on Aug 6, 2009 12:49 PMThat info is available either at http://service.sap.com/pam or http://service.sap.com/quicksizer
Please do some research before posting
Read the "Rules of Engagement"
regards
Juan -
Hardware requirement for Oracle Universal Content Management
Hi Experts,
What are the Hardware requirements for Oracle Universal Content Management ?
Regards
Nasirdoes this help?
Oracle WebLogic Server 11g (10.3.3) System Requirements
Oracle WebLogic Server supports a number of platforms including:
– Linux
– Sun Solaris
– HP-UX
– Windows 2000, 2003 Server, XP
• Processor:
– At least one 1 GHz CPU is recommended.
– Intel and UNIX processors are supported.
• Hard disk drive:
– A full installation requires approximately 2 GB of disk space.
– The Linux value for file descriptors must be 4096 or greater.
– Samples are optional (download from OTN).
• Memory:
– A minimum of 2 GB RAM is recommended for WebLogic
Server.
– Consider the number of simultaneous users and sessions.
– Consider in-memory programs, such as Coherence.
System Requirements
The following are some of the basic system requirements for Oracle WebLogic Server 10.3.3:
• The Oracle WebLogic Server installer requires a Java Runtime Environment (JRE) to run.
Oracle WebLogic Server is certified with JDK6.0. As part of the installation, it gives the option
to install the JRockit JDK 6.0 version. As part of postinstallation, prefix the bin directory of
the JDK to the PATH environment variable.
• The Oracle WebLogic Server installer requires a temporary location in which to unpack the
files. Typically, the installer requires approximately 2.5 times the amount of temporary space
that is required by the installed files.
Note: In this release of WebLogic Server, users can choose which components of WebLogic Server
they use. Specifically, this release allows users to choose whether the Enterprise JavaBeans (EJB),
Java Message Service (JMS), and J2CA services are started when WebLogic Server is started. The
benefit of excluding some services is reduced memory footprint and reduced startup time. -
After updating to lion installed graphics card does not meet minimum requirements for aperture
Hello,
I updated to OSX lion yesterday. and Apterture is given me this error message. "The installed graphics card does not meet the minimum requirements for Aperture. I tried the Option Command Open app thing to try rebuild the database. But nothing happens when I try opeing the app using those combo key's So I removed the app using mackeeper and tried reinstalling it. still same issue.
I have following machine
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B0E
SMC Version (system): 1.69f1
Serial Number (system): C02F94ETDMGG
Hardware UUID: 132AE53D-0766-5E17-9F54-ED935D6F7AB3
Sudden Motion Sensor:
State: Enabled
Chipset Model: AMD Radeon HD 6750M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6741
Revision ID: 0x0000
ROM Revision: 113-C0170L-521
gMux Version: 1.9.23
EFI Driver Version: 01.00.521
Displays:
Color LCD:
Resolution: 1680 x 1050
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
VX2245wm:
Resolution: 1680 x 1050 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: QD0064002266
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Apple Mini DisplayPort To VGA Adapter
Adapter Firmware Version: 1.03
Display Connector:
Status: No Display ConnectedHAve you tried disconnecting the external monitor rebooting and then runnig Aperture?
-
Software Requirements for EJB - Stateless
Dear Experts,
Please state the list of software requirements for executing EJB-Stateless bean
if possible along with an example & steps for execution.
Adv.Thanks,
Rengaraj.Rrenga_murali wrote:
Dear experts,
i got an sample program but if i compile on jdk 1.3 i get error wht should i do ???
i know to search in google....thks for your 100s adviceWell for a start trying, try upgrading... Putz!
On Windows, Linux, Solaris 9, and Solaris 10 J2SE 1.3.1 has completed the Sun End of Life (EOL) process. The EOL transition period was from Oct 25, 2004 until the General Availability (GA) of Java SE 6 on December 11th, *2006* . With this notice, customers are strongly encouraged to migrate to the current release, Java SE 6. Read More. A paid Java Vintage Support Offering is available for those customers who are interested in continuing to obtain support for the release. Please contact your Sun sales representative for details.
On Solaris 8 - J2SE 1.3.1 is continuing in the Sun End of Life (EOL) process. The EOL transition period began Oct 25, 2004 and will continue until the the end of the Solaris 8 five year Vintage Support Period. During this EOL transition period, the products will continue to be supported on Solaris 8 per existing customer support agreements.
For developer needs, all products that have completed the EOL transition period will be moved to the Archive area. -
Pre-requisite packages required for Oracle R11i
Hi Gurus,
I am new to DBA.I am working with oracle 11i cloning.In that task is to pre-clone from source system(os:Red Hat-4.0) and do post clone in target system in which I installed new os(os:Red Hat-4.0).
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages.
Could you please help me.
Thanks
VinothHi;
Here I need your help.What are all the pre-requisite packages required for Oracle R11i before configuring the Target System and how to apply the pre-requisite packages. Imagine you are making new installation on your target server. So you need to check all pre-req which is mention in below notes. You need to have all rmp hosts file edit and some other steps.
Please see:
Subject: Recommendations to Install Oracle Applications 11i Doc ID: 294932.1
Oracle Applications 11.5.10 - Installation Update Notes for Linux x86, Solaris SPARC, MS Windows, HP-UX PA-RISC, HP-Tru64, IBM AIX - B13590-01 [ID 287453.1]
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
PS: I suggest also see my blog http://heliosguneserol.wordpress.com/2010/05/31/cloning-oracle-applications-release-11-and-12/
Regard
Helios -
Requirement for client installation 9i
Hi;
I want to install Oracle client 9i in the UNIX server (Solaris 2.8). I am searching requirement for this installation, I don't find it...
Can any help me please
MostafaHi,
there is no client-server anymore in Oracle Forms. Its a web only deployment. So 1-2 no longer apply.
3) You need to install Oracle Jinitiator on the client or the Java 1.4 Plugin. Both can be configured for automatic installation.
See the Oracle Application Server documentation and whitepapers on otn.oracle.com/products/forms to learn about how to install and run Forms Services
Frank -
System Requirement for Web-Dynpro Appraisal Application on ESS
Hi Gurus...
Greetings
Our client have SAP Netweaver 7.0 without any Enhancement Pack.
They are already using standard Web-Dynpro application of Leave Management System on ESS.
Now, they want to use standard Web-Dynpro screens for Appraisal system on ESS.
My Query is: What is the minimum system requirement for using standard Web-Dynpro screens for Appraisal system on ESS ???
I think minimum enhancement pack used for the same requirement is EHP2. Kindly correct me if I am wrong.
One more query: From where we can see the latest Enhancement Pack applied on System ???
Please reply to my Queries.
Thanks & Regards,
PKG.....Hi,
Greetings....
How can we have our system upgraded from ECC 600 to ECC 604 (EHP4) ???
Is it a patch level activity or upgraded activity ??
How to achieve this, would it be having any side-effects on current system ??
Thanks & Regards,
Maybe you are looking for
-
My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this?
-
TungstenE won't sync to Outlook 2003 since receiving new laptop
My previous laptop died so my IT dept moved my data to a new laptop. Our programs and data are stored on separate drives. The Palm software & data was stored on the program drive, so I lost everything related to my Palm. I reinstalled Hotsync Mana
-
OIM11gR2 BP3 - Migration of GTC from one env to another
Hello All, I'm trying to export a GTC from my Dev env to another env. I did export the GTC via Deployment Manager by choosing the Generic Connector option. I've selected all the dependencies like Resource Object, IT Resource, IT Resource Type, Applic
-
Log-in to You tube within captivate
I have multiple youtube (google) accounts. However, captivate will only accept one when i attempt to publish to You Tube within Captivate. Does anyone know why this would happen? I have tried running captivate as admin and it does not work. I have tr
-
How make LOV in JDeveloper 10g by ADF
How make LOV in JDeveloper 10g by ADF please help guys ?