Solaris 9 sendmail (8.12.10) configuration problem

Hi,
I have a problem with sendmail 8.12.10 on Solaris 9. I generate my sendmail.cf file using m4 *.mc files which adds the genericstable and masquerading features etc.
I use the genericstable to rewrite emails from certain senders on the Solaris server to another address; eg.
root [email protected]
This way system emails sent by the root account will appear to the receipient as coming from [email protected] and replies to these emails (including mail bounces) will go the local Sys Admins.
With Solaris 9's sendmail (8.12.10) the genericstable sender address rewriting no longer works. Sendmail (8.11.3) on Solaris 8 using a sendmail.cf file generated from the same sendmail.mc source works fine.
The strange things is that in sendmail rule test mode (sendmail -bt -d21.4 -d21.12 -d31.2 -d0.4) entering the ruleset
3,1,EnvFromSMTP,4 rootprocesses the generictable and rewrites the sender address and returns:
final returns: UnixTeam @ domain . com
Can any sendmail GURUS out there please give me a clue what I'm missing or what needs to be changed in my sendmail.mc for Sendmail version 8.12.x??
Thanks.

How about issues with sendmail 8.12.12 ?
When I setup sendmail.mc for genericstable, see below:
divert(0)dnl
VERSIONID(`@(#)subsidiary.mc 1.10 (Sun) 12/14/00')
OSTYPE(`solaris8')dnl
define(`ALIAS_FILE',`/etc/mail/aliases')dnl
DOMAIN(`solaris-generic')dnl
FEATURE(`msp', `[firewall.com]')dnl
dnl
define(`SMART_HOST',`firewall.com')dnl
FEATURE(masquerade_envelope)dnl
FEATURE(genericstable, `hash -o -T<TMPF> /etc/mail/genericstable')dnl
GENERICS_DOMAIN_FILE(`/etc/mail/genericsdomain')dnl
MAILER(`local')dnl
MAILER(`smtp')dnl
LOCAL_NET_CONFIG
R$* < @ $* .$m. > $* $#esmtp $@ $2.$m $: $1 < @ $2.$m. > $3
compile...everything looks good
/usr/lib/sendmail -bt
ADDRESS TEST MODE (ruleset 3 NOT automatically invoked)
Enter <ruleset> <address>
/map generics rootmap_lookup: generics (root) returns [email protected] (0)
/quitbut when I send out mail to root (mailx) FROM does not invoke the new value
MAIL From:<[email protected]> SIZE=76
250 2.5.0 Address and options OK.
RCPT To:<[email protected]>
Am I missing something ?
Also notice that sendmail does not use the aliases db
Is it necessary for the sendmail daemon to be running ?
We just process saved messages /usr/lib/sendmail -q in crontab (outgoing only / no inbound mesages)
thanks for any assistance

Similar Messages

Solaris in Logical Partition and Internet Configuration

Hi !
I'm really passionate about this unix-solaris thing.
But these nudges are pulling me back from installing it actually in my hard drive.
And also there is the Internet configuration problem.
Problem:1
I have 2 IDE HDD.
Primary HDD: 80 GB
VolumeName-Type-Size
SystemBoot-Primary/Active/NTFS-100 MB
Extended Partition:
VISTA-Logical/NTFS-20 GB
2008-Logical/NTFS-10 GB
Data-Logical/NTFS-25 GB
Music-Logical/NTFS-9.42 GB
Solaris-Logical/BLANK-10GB .....Blank = No FS. Used Acronis DD10 for it.
Slave HDD: 40 GB
Extended Partition:
XP-Logical/NTFS-10GB
Fedora9-Logical/ext3-10GB
SWAP-Logical/SWAP-2GB
OpenSUSE103-Logical/ext3-15.25 GB
When I came to HDD configuration stage of installation,
I selected the pre-selected c0d0(bootdisk) ---Primary HDD/80GB.
But when I proceeded further it showed me:
Warning � The initial fdisk information found on the disk
c0d0 was invalid. Defaulting the entire disk to a Solaris partition.
So I aborted the installation.
I tried one more time, by changing the Solaris Blank logical drive to a primary partition.
But it didn't work.
Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.
Please help me on this.
I'm sick of installing it in VMWare.
Problem: 2
How am I supposed to configure my network connection.
I connect to my ISP using WAN Miniport(PPPOE).
It allots me dynamic IP(v4).
I read somewhere DNS should f.root-servers.net and in a magazine, a.solaris.net
I never came across such a thing in even in linux.
Problem: 3
If there is not so �feasible� solution to problem 1, VMWare Workstation comes into play.
And here too, I need help for configuration of network connection.
These are the values that I got when I installed Windows XP in the VMWare.
LAC -Local Area Connection
LAC � Limited or no connectivity
IP � 169.254.127.90
Subnet -255.255.0.0
Adapter #2 � Bridged
LAC -2
IP -192.168.21.132
Subnet 255.255.255.0
Gateway -192.168.21.2
DHCP Srv 192.168.21.254
DNS/WINS Srv 192.168.21.2
Adapter#1 � NAT
LAC � 3
IP 192.168.209.135
Subnet 255.255.255.0
DHCP Srv 192.168.209.254
DNS � 192.168.209.1
Adapter #3 � Host Only
Thanks In Advance !

Natty wrote:
Now I think Solaris 10 cannot be installed in a logical drive or more broadly speaking(assuming) it cannot be installed in HDD having logical drives,it should be all primary partitions.This is correct. You need a primary partition (or space for one) for Solaris to install on the drive.
Problem: 3
If there is not so feasible solution to problem 1, VMWare Workstation comes into play.
And here too, I need help for configuration of network connection.
These are the values that I got when I installed Windows XP in the VMWare.
LAC -Local Area Connection
LAC  Limited or no connectivity
IP  169.254.127.90
Subnet -255.255.0.0
Adapter #2  BridgedThat's an autoconfig IP. It suggests that it tried to do DHCP on the interface and failed. Perhaps you need to configure a hard address.
LAC -2
IP -192.168.21.132
Subnet 255.255.255.0
Gateway -192.168.21.2
DHCP Srv 192.168.21.254
DNS/WINS Srv 192.168.21.2
Adapter#1  NATThat's the NAT address. Any problems using it? That's the normal way I use my Solaris VM hosts.
LAC  3
IP 192.168.209.135
Subnet 255.255.255.0
DHCP Srv 192.168.209.254
DNS  192.168.209.1
Adapter #3  Host OnlyAnd that's the host-only adapter. That won't be useful for reaching resources off the VM host.
Darren

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

Configuration problem for suncluster3.1

Hi ALL
I am Murali working as system admin in CA , I have configured suncluster3.1.
I have followed below steps
I have machines sun fire v245 O/S is Solaris 10 sparc. Wants to configured suncluster3.1
1) Installing the packages with the installer
2) Scintlla and define the nodes.
3) Iam not using cluster switches and Through Crossable using I connect to directly to two nodes
4).iam not selecting quorum device
after finishing scintlla , I got below error
*** Create a New Cluster ***
Wed Dec 26 12:45:50 IST 2007
Attempting to contact "lodisun028.ca.com" ...
Searching for a remote configuration method ...
scrcmd -N lodisun028.ca.com test isfullyinstalled
The Sun Cluster framework software is installed.
scrcmd to "lodisun028.ca.com" - return status 1.
rsh lodisun028.ca.com -n "/bin/sh -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
permission denied
rsh to "lodisun028.ca.com" failed.
ssh [email protected] -o "BatchMode yes" -o "StrictHostKeyChecking yes" -n "/bin/sh -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
Permission denied (gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-interactive).^M
ssh to "lodisun028.ca.com" failed.
The Sun Cluster framework is able to complete the configuration
process without remote shell access.
- Cluster Creation -
Testing for "/globaldevices" on "lodisun027.ca.com" ...
/globaldevices is not a directory or file system mount point.
Cannot use "/globaldevices" on "lodisun027.ca.com".
Please help me to configured suncluster3.1, above process if there is any wrong, please correct me if iam wrong
please give me step by step documents for suncluster3.1
mail id :[email protected]
cheer's
Murali Muppa

Dear Tim
As you said,i followed
but my requirement is without qourum device i want to configure.through nfs sharing can i configure?
if possible can you please guide me how to take nfs sharing.
and each other i communicated through crosswire cable,is it possible,if there is any mestek plz help me
after creating i got beloe error
bash-3.00# view /var/cluster/logs/install/scinstall.log.1197
"/var/cluster/logs/install/scinstall.log.1197" [Read only] 134 lines, 5171 char
acters
[Hit return to continue]
*** Create a New Cluster ***
Thu Feb 7 10:45:25 IST 2008
Attempting to contact "lodisun027" ...
Searching for a remote configuration method ...
scrcmd -N lodisun027 test isfullyinstalled
scrcmd: lodisun027 - Node does not allow remote configuration.
scrcmd to "lodisun027" - return status 104.
rsh lodisun027 -n "/bin/sh -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh to "lodisun027" - return status 0.
ssh root@lodisun027 -o "BatchMode yes" -o "StrictHostKeyChecking yes" -n "/bin/s
h -c '/bin/true; /bin/echo SC_COMMAND_STATUS=\$?'"
Permission denied (gssapi-keyex,gssapi-with-mic,publickey,password,keyboard-inte
ractive).^M
ssh to "lodisun027" failed.
The remote shell (see rsh(1)) will be used for remote execution.
- Cluster Creation -
Testing for "/globaldevices" on "LODISUN028.ca.com" ...
Testing for "/globaldevices" on "lodisun027" ...
rsh lodisun027 -n "/bin/sh -c '/usr/bin/mkdir -p -m 0755 /var/cluster /var/clust
er/run; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/bin/chgrp sys /var/cluster /var/cluster/run;
/bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rcp /var/cluster/run/scinstall_common lodisun027:/var/cluster/run/scinstall_comm
on
rsh lodisun027 -n "/bin/sh -c '/usr/bin/chmod 0555 /var/cluster/run/scinstall_co
mmon; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rcp /var/cluster/run/cmd_chk_globaldev lodisun027:/var/cluster/run/cmd_chk_globa
ldev
rsh lodisun027 -n "/bin/sh -c '/usr/bin/chmod 0555 /var/cluster/run/cmd_chk_glob
aldev; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/var/cluster/run/cmd_chk_globaldev fs /globaldevi
ces; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/bin/rm -f /var/cluster/run/scinstall_common
/var/cluster/run/cmd_chk_globaldev; /bin/echo SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
Checking installation status ...
rsh lodisun027 -n "/bin/sh -c '/usr/bin/test -f /etc/cluster/.installed; /bin/ec
ho SC_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/cluster/lib/scadmin/lib/cmd_test isinstallin
g; /bin/echo SC_COMMAND_STATUS=\$?'"
"" is not running.
SC_COMMAND_STATUS=0
rsh lodisun027 -n "/bin/sh -c '/usr/bin/test -f /etc/cluster/nodeid; /bin/echo S
C_COMMAND_STATUS=\$?'"
SC_COMMAND_STATUS=1
rsh lodisun027 -n "/bin/sh -c '/usr/bin/test -x /usr/bin/gzcat; /bin/echo SC_COM
MAND_STATUS=\$?'"
SC_COMMAND_STATUS=0
The Sun Cluster software is installed on "LODISUN028.ca.com".
The Sun Cluster software is installed on "lodisun027".
Starting discovery of the cluster transport configuration.
===========================
LODISUN028.ca.com
===========================
scrconf -n cmd=discover_send,adapters=bge1:bge2,vlans=0:0,token=suncluster_lodis
unclust01,sendcount=30
===========================
lodisun027
===========================
rsh lodisun027 -n "/bin/sh -c '/usr/cluster/lib/scadmin/lib/cmd_autodiscovery 0:
0 suncluster_lodisunclust01 2 30; /bin/echo SC_COMMAND_STATUS=\$?'"
quit
SC_COMMAND_STATUS=0
===========================
Probes were sent out from all transport adapters configured for this
node ("LODISUN028.ca.com"). But, they were not seen by any of the
other nodes. This may be due to any number of reasons, including
improper cabling or a switch which was confused by the probes.
You can either attempt to correct the problem and try the probes
again or manually configure the transport. To correct the problem
might involve re-cabling, changing the configuration, or fixing
hardware. You must configure the transport manually to configure
tagged VLAN adapters and non tagged VLAN adapters on the same private
interconnect VLAN.
===========================
LODISUN028.ca.com
===========================
scrconf -n cmd=discover_send,adapters=bge1:bge2,vlans=0:0,token=suncluster_lodis
unclust01,sendcount=30
===========================
lodisun027
===========================
rsh lodisun027 -n "/bin/sh -c '/usr/cluster/lib/scadmin/lib/cmd_autodiscovery 0:
0 suncluster_lodisunclust01 2 30; /bin/echo SC_COMMAND_STATUS=\$?'"
bge1:0:LODISUN028:bge1:0
quit
SC_COMMAND_STATUS=0
===========================
The following connection was discovered:
LODISUN028.ca.com:bge1 switch1 lodisun027:bge1
Only one connection was found for "lodisun027".
Probes were sent out from all transport adapters configured for this
node ("LODISUN028.ca.com"). But, they were not seen by all of the
other nodes. This may be due to any number of reasons, including
improper cabling or a switch which was confused by the probes.
You can either attempt to correct the problem and try the probes
again or manually configure the transport. To correct the problem
might involve re-cabling, changing the configuration, or fixing
hardware. You must configure the transport manually to configure
tagged VLAN adapters and non tagged VLAN adapters on the same private
please help me to configure simple two-node cluster.
cheer's
Murali M
[email protected]

Solaris 10 branded zone VM Template Install Problem

Hi,
I don't seem to be able to install the template on a system that uses an aggregate NIC (aggr0). The template install script is looking for physical NICs, which it can't use since the NICs are assigned to the aggregate link.
Any suggestions for a clean solution or workaround?
Thanks

On line 1 of /tmp/zcfg.final:
SYSsolaris10: No such zone configured
Problem configuring the zone10 zone, exitingThis indicates one of two things:
1. You are not running Solaris 11. You may be running Solaris 11 Express, where that template zone name would have been SUNWsolaris10 rather than SYSsolaris10.
2. You do not have the solaris10 brand installed. You can fix that with:
# pkg install pkg:/system/zones/brand/brand-solaris10In either case, it would probably be better for the script that wraps the archive to check before trying to install the zone to give a more helpful error message.
rm: Cannot remove any directory in the path of the current working directory
//bootimage.7Oayzm/bootstrap
rm: Unable to remove directory //bootimage.7Oayzm: Directory not emptyThis seems to be an unrelated bug in the error handling routines in the script that wraps the archive. I'll raise this thread to the attention of those that assemble the VM Templates.

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

Configuration problem with param or code problem

Hi,
Im new to this jsp. Currently, i have some some Q here. Im trying on the jsp-tutorial with
<%@ taglib prefix="my"
uri="./jsp2/jsp2-example-taglib.tld" %>
<HEAD>
<TITLE>Functions</TITLE>
</HEAD>
<BODY>
<H3>Add Numbers</H3>
<P>
<FORM action="./compute.jsp" method="GET">
X = <input type="text" name="x" value="${param["x"]}">
<BR>
Y = <input type="text" name="y" value="${param["y"]}">
<input type="submit" value="Add Numbers">
</FORM>
<P>
The sum is: ${my:add(param["x"],param["y"])}
</BODY>
</HTML>
inside the text box it appear the text with ${param[[/i], may i know is it a configuration problem?
Thx for reply

Probably yes it is a configuration problem.
You have a JSP2.0 container? (eg Tomcat 5)
If your web.xml starts with this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
Replace it with this
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
That should fix it.
http://forum.java.sun.com/thread.jspa?threadID=629437&
tstart=0Sorry,
I already hav
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
originaly.

Configuration problem with external Western Digital My Book 2 TB drive

How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
Get a 2nd drive case to recover to.
http://www.macsales.com/firewire
may need to play with the demo Data Rescue 3 from Prosoft
Backup/recover before repair is usually in order
never have one backup set. THREE sets of your data, minimum.
3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

Trash and Send . I have a new IPAD 2 and I do not have any of my e mails in the send and trash folders. I have had the IPAD about three weeks and have sent and deleted many e mails. Do I have some wrong settings or configuration problem??

I purchased an IPAD 2 about three weeks ago. When I go to my Trash and Send foloders it appears that none of my deleted or sent e mails are bing captured/stored in these folders. do i have a configuration problem???

Once you connect to the Wifi Network once, then the iPhone or iPad remembers it and attempts to connect automatically in the future, but you have to tap to connect to that Wifi the first time. Like the first time you get on your home wifi, or the first time you go the a certain hotel, etc.
Now, one you navigate to Settings > Wifi and tap on the network you wish to connect to, if you are having issues there, use this article to help you: http://support.apple.com/kb/TS1398

Solaris 9 sendmail (8.12.10) configuration problem

Similar Messages

Maybe you are looking for