Solaris 9 server is not connecting to the network

hi,
we are working on a Sun Spark v240 ,Solaris 9 sever.
there was a ip clash between the server and other machine in the network.
Since then our server is not connecting to the network.
We disabled the ip on the other machine.
But still the problem persisits.
When we do trace route we are not getting any info.
It doenot even ping the default gateway.
please help

1, Could you provide some network layout info, eg: The network or subnet(provide subnet mask if using a subnet) address, The servers address, each other machines address.
2, Make sure you haven't disabled your hme?(ether) devices.
3, i know this is an old post, if you fixed the problem please reply your solution as it may help others troubleshoot similar problems.

Similar Messages

  • The ipod software update server could not be contacted.the network connection could not be established

    the ipod software update server could not be contacted.the network connection could not be established

    Try changeing the DSN server. See:
    iOS 5 update issues  "Network...: Apple Support Communities

  • When trying to use the apps message received is not connected to the network

    My printer is connected and I can print from the ipad and the laptop, but when I try to use one of the apps to print something.  I get an error message that the printer in not connected to the network.  I have tried all the trouble shooting tips and when printing out the wireless network test results, it says no problems found.  Please help, this is a brand new printer purchased on 08/30/2012.

    I believe I have the same problem.  I get "Server Connection Error: -1".  This only occurs on weekends (Sunday).  Is this because someone turns off the server on the weekends?
    There is nothing available to describe what this error message means.

  • When using Parallels for Windows 7, I cannot connect to Wi-Fi. I get drop down menu "Real Network Adapter Thunderbolt Bridge used by Virtual Adapter 1 is not connected to the network". How do I fix?

    When I try to connect to internet wirelessly (Parallels/Windows 7 on my Mac Pro) I get a drop down that says "Real Network adapter thunderbolt bridge used by virtual adapter 1 is not connected to the network". I can not figure out how to connect - any help is appreciated!

    Since you are having trouble with Parallels or Windows, did you ask in their respective support forums? If not, you might want to consider doing so.

  • My wireless internet is working with all of my other devices but my imac will not connect to the network?

    Can anyone help?  My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

    First run Software Update to make sure your iMac is up-to-date.
    Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are  pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
    Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

    When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

    looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

  • TS2972 Apple TV is not connected to the network?

    After installing the latest Apple TV firmware update 5.1.1 (5433), my Apple TV will not stream music from my iTunes over the wifi network. After 15 - 120 seconds of music, the streaming stops and I get the "Apple TV is not connected to the network" message. My iPhoto is still streaming pictures and I can go to Radio and stream content.
    In the "About" screen. I have 4 out of 5 bars of signal, but the IP Address number and wi-fi network name drop out randomly. I have reset and restored several times to no avail. I have reset my router several times and powered down/restarted several times. The Genius Bar folks have no answers except purchase a new one.
    The system has worked perfectly until the December update.
    Any answers?

    This will be due to a network issue, which can come at any time
    Make sure DNS is set to auto (settings - general - network)
    If on wifi try Ethernet
    To see a status of the network go to istumbler, netstumbler or similar to get a report. Look for signal strength, noise, nearby networks

  • I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • I cannot access my Apple TV in WiFi mode. I have used it previously, but it keeps saying it is not connected to the network. My broadband is running. I was able to access Apple TV using an Ethernet cable. I have entered the password as confirmed by my ISP

    I cannot access my Apple TV in WiFi mode. I have used it previously, but it keeps saying it is not connected to the network. My broadband is running. I was able to access Apple TV using an Ethernet cable. I have entered the wireless password as confirmed by my ISP without any success.

    Hi,
    Thanks for trying to solve my problem. It appears that the password I was inserting was incorrect. I now have access.
    Thanks again.

  • When i try to sign on to istore it says im not connected to the network but i am connected to the network

    when i try to sign on to istore it says im not connected to the network but i am an i cant sign on

    Hello patirots,
    If you cannot connect to the iTunes Store, I reviewing the steps in the following article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • ITunes says i´m not connected to the network

    iTunes says i´m not connected to the network and don´t can use the iTunes Store.

    That was the first thing I tried..what the site told me, but its still telling me I'm not connected to the internet when I am. Should I just delete everything by hand. Like I said I wanted to take it back and upgrade to the 80 gig ipod.

  • My BlackBerry Curve 8520 not connecting to the network

    My BlackBerry Curve 8520 is not connecting to the network for three days now and I can not figure out what might be the problem. It is recognizing the mobile network, but informing that I am not in a covered area. I have removed the SIM card and inserted it in another phone, the connection was just fine.
    What could be the problem?
    Thanks beforehand for your assistance.
    PS: for sake of good order, the mobile network service provide I usually use is Vodacom Congo

    if i sent a sms my bkackberry curve 8520 tell me network out of order

  • I recently restored My Iphone as it was not connecting to the network, how do I get my back up back onto my Iphone?

    I recently restored My Iphone as it was not connecting to the network, how do I get my back up back onto my Iphone?

    Restore from backup or simply sync the content you want to the device.

  • NAC server is not available on the network

    I am doing a rollout of ISE 1.1.1. I am using NAC agent 4.9.0.47 for posture checking win7 x86 machines. Occassionly users are getting 'NAC server is not availble.... try disconecting and connecting to the network to start a new connection' When I  try to reproduce the issue it is not happening. It happens randomly here and there. What are the possible reasons fro this issue. Since ISE is not getting posture result, and the machine remain in in posture check 'unknown' stage. I am in half way of rollout and it is stoping me to further rollout. IIf anybody knows, please advise.........

    Hi,
    I had the same issue and upgrading to 1.1.2 made the issue quiet down a bit. I have a few reported issues but havent seen any in the past 2 weeks. Also which supplicant is the client running and do they see these on the laptops or machines that have both wired and wireless connections?
    The reason I ask is that the native windows supplicant tends to connect to both networks (wired and wireless), this can can cause some problems with the NAC agent if the link for the wired or "the lower metric route" flaps.
    the bug cisco provided me is related to "CSCuc70607".
    Hope this helps,
    Tarik Admani
    *Please rate helpful posts*

  • Can not connect to the network

    I just purchased the Apple TV. My network consists of an Airport Extreme "n" base station and a Powerbook. I "had" WPA security set up on the network, but since I had trouble connecting the Apple TV with the password, I reset the base station and are back to the default configuration, no security, and in bridge mode to troubleshoot. Even with this configuration I am unable to connect the Apple TV.
    I get:
    Connection Failed
    Apple TV could not connect to the Internet. Check your network settings and try again.
    My laptop is right next to the Apple TV, has a very strong signal and does connect.
    So far I've been unable to get anyone at Apple Technical Support to give me help on Apple TV.
    Anybody have any ideas?
    Thanks!

    Wow... what an ordeal! I did get it working. I had to perform a "Factory Reset" on it and then it was able to connect. I tested it with a couple of movie trailers and it worked fine. I changed my network back to WPA with a password that I would be able to reproduce in Apple TV, and it connected up fine. What a big sigh of relief! I am now streaming my iTunes content and life is certainly wonderful!
    I am very happy with it! It only took me a little over 5 hours to install it!
    Thanks for all your help Winston!

Maybe you are looking for