Solaris 9 Switching from line base to GUI

Hey all,
I'm very new to SOLARIS 9. I just installed it about a week ago. My question is when i log on it in LBC is there a way to make it GUI?

As the root user, run /usr/dt/bin/dtconfig -e
Next time you reboot, you'll have a graphical interface.

Similar Messages

  • Disk File Sharing Switching from with base station password to with account

    Ok, here's the situation. I have an external hard drive, with multiple partitions, connected to an AirPort Extreme (802.11n) and it is currently protected using the "With Base Station Password" option. I would like to switch that to the "With Account" option but when I do the files that are located on the disk no longer appear when a user connects. It will also work fine if I use the "With a disk password" option. So I am not sure why the files are disappearing for the users when they connect. Is there something that I am missing and is it possible to make the change.

    I have the same issue.
    Plus, in my case, two disks appear on my desktop, even though I have no partition. One is named the same as my disk, the other is named the same as the user account for the disk on the Airport Extreme.

  • Having trouble switching from Core to GUI with Server 2012...

    Hello,
    I am currently in the early stages of studying for the MCSA - Windows Server 2012 R2 and I'm playing around with an Eval copy of Windows Server 2012 R2 DataCenter.  I have two separate installs where one is the Full - GUI install and the other is Server
    Core.  I've learned in my studies that it is possible to switch back and forth between Core and GUI through Powershell cmdlets.
    Right now I'm trying to switch from Server Core to GUI and I'm using the following Powershell command:
           Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell
    It starts off like it's going to work but then after about 68% of the way through, I get this:
         Install-WindowsFeature : The request to add or remove features on the specified server failed.
         Installation of one or more roles, role services, or features failed.
         The source files could not be downloaded.
         Use the "source" option to specify the location of the files that are required to restore the feature. For more
         information on specifying a source location, see XXXXXX. Error: 0x800f0906
         At line:1 char:1
         + Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell
         + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
              Exception
             + FullyQualifiedErrorId :       DISMAPI_Error__Cbs_Download_Failure,Microsoft.Windows.ServerManager.Commands.AddWindowsF
       eatureCommand
    Any ideas?  I installed this Server Core image on a Hyper-V Virtual Machine (using Generation 2), allocating 4GB RAM and 65GB HDD space.  I haven't done anything with .Net Framework and I haven't configured the network at all.
    Any advice would be greatly appreciated.

    Hi SLONER,
    You need use the -source option on a non-Internet connected machine.
    PLease try the script below:
    Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
    And follow this thread:
    PowerShell to Add GUI to Server Core (ServerCore-FullServer)
    I hope this helps.

  • Can you run a wired router from the base station?

    I have a Airport Extreme base station, I bought it about 6 months ago so it's not too old. My question is can you plug a wired switch, hub or router into it? I was told no at the apple store but I don't see why you could not. All I want to do is run a 8 port switch from the base station so I can connect my other wired comps to the net. Thanks!

    My question is can you plug a wired switch, hub or router into it?
    Yes, just connect it to the LAN port on the AirPort Extreme base station (AEBS).
    I was told no at the apple store...
    They gave you incorrect information.

  • Flex GUIs get a bad performance in normal screen mode when switched from full screen mode

    Hi, there :
    I encountered an odd situation and it is only happens on IE. Our project is a Flash 3D Game using Stage3D, and the Game's GUIs are created by CS6. When our game switch from the full screen( StageDisplayState.FULL_SCREEN_INTERACTIVE or StageDisplayState.FULL_SCREEN ) to normal screen ( StageDisplayState.NORMAL ), the performance of the Game GUIs decline to approximate a half FPS of full screen mode. But this condition is only happens on IE.
    The Game is normal screen when it is initialized and the performance is as same as fullscreen. The performance degradation only happens after switching to normal screen mode from full screen mode.
    p.s. : When the mouse is out of the view, the performance become better, from 20 fps up to 50 fps. But is still not as same as the original 60 fps.
    p.s. 2 : My colleague told me the Flash Pro CS6 be used to built a single swc file per GUI, and then package all ui swc files to one swc file by Flex Framework SDK( the command is "compc" ). and the IE version = 9.0.8112.16421, the Flash Player Version = 11.6.602.155.
    p.s. 3 : I have utilized Adobe Profiler Scout to observe the application, and I found that when it switches to normal screen mode from full screen mode, the time 「Waiting for GPU」 in 「Inactive」 grows up from 10ms to approximate 30ms which is triple. And in the 「Activity Sequence 」tab, it shows that the 「Waiting for GPU」 happens in the 「Copying to screen 」in 「DisplayObject List」.
    Thanks

    This does sound like a specific bug with IE. It would be great if you could file a bug report here (https://bugbase.adobe.com/), so we can get somebody to look into it.
    btw, Flex is really not a good framework for games - it's really slow and heavyweight. If you're just wanting some lightweight UI elements, you might want to check out the Feathers framework, which is built on top of Starling: http://feathersui.com/

  • How to switch from  one Data base to another data base

    Hi,
    How to switch from one Data base to another data base if first data base server like in restoring,blocking,network disconnected state.
    Please help out for the same.
    Regards,
    Anilkumar

    Sounds like a problem for forums/support from the DB provider, as this problem is normally solved through some form of HA provided by the DB (or some cluster software, but still not Java) with, normally, a shared (virtual) IP address.

  • How to switch your line to verizon iphone from another verizon device??

    Hi, when I try to switch my line to an iphone from another device online, it is said that I have to enter the new device ID number, and it is 14 digis. but I found that the iphone ID is 40 digis when I google it online. So ,what is the solution????thanks~!!

    tim8942 wrote:
    I think I can get the activation part done. but is it possible to switch my line to the new iphone that tied to my dad's line? if it is not, I would rather just order the new iphone under my line and regardless the $30 discount. thanks~!!
    Yes. You might be able to follow the steps listed and do it on your own (just make sure when it gets to the point in iTunes to add your info you add your phone number). If you run into trouble or would rather make sure it is done right you can contact Verizon or go to the store and have them activate it on your line.

  • I have switched from s3 android base to 5s....

    i have switched from s3 android base to 5s....but see some basic thing iphone must have like in other phones that is....
    is there is way to cancel incoming call in locked screen except pressing power button twice?
    is setting up speedial option is possible in phone dialer?
    is here is a option to put/tick/mark a default no. for a particular contact no. in phonebook entries who are having 2 or more no. like if in phonebook I store Mr. Sanjay having no 1234 ; 5678 ; 7890 and want to make 5678 is a default no. so when I touch Sanjay in dialer it automatically dial 5678 instead of asking every time which no. "(apple may add this option in future, when we press&hold a particular no. it show copy option only, there they can add other options also)
    in phone dialer keypad apple can also update when we type no. after press 3-4 digit it can show related no's from phonebook/recent entries instead of typing whole mobile no. that features will be really convenient/great.
    apple must have to provide feature of edit no. before call for prefix by press+hold a no. while dialing direct from phonebook as this will be great while roaming instead of first edit the contact details in phonebook.
    apple personal hotspot requires update like when we on hotspot then both wifi & Bluetooth opens but while turning off them remain open they donot get close even apple should have separate option for wifi & Bluetooth this saves battery power a bit like usb option. even in usb mode Internet connectivity between  pc & mobile some time drop.
    in keyword layout is it possible it show words in non-capital mode/dual mode as it will easy to type? apple must provide both options to users

    Since you just got the iPhone and don't seem familiar with its features, you should probably start with the manual:
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Then, if there are features that the phone doesn't have that you think Apple should add, use the Feedback link:
    http://www.apple.com/feedback
    Best of luck.

  • Switched from DSL to cable, need help getting TC back on line.

    I just switched from dsl to a cable modem to access the internet and my service provider doesn't offer support for my TC. Where can I find out how to change my settings (I guess from PPPOE to DHCP) to allow internet access from my wireless network? It seems like a matter of plugging the right numbers into the right place but I don't know where to find the numbers or where to put them exactly. Any help is appreciated.

    Hello Sivad72. Welcome to the Apple Discussions!
    I suggest that you first perform a "hard" reset on your Time Capsule (TC). Then, perform a complete power recycle of your network components to get them "talking" again.
    Power Recycling Steps
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    o Power-off the modem, TC, & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the TC; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • Moving disks while maintaining Solaris 10 install from one v240 to another.

    Hi,
    I want to move a Solaris 10 install from a sunfire v240
    with a single cpu to another sunfire v240 with dual cpu's. Here are the
    details of the hosts as well as configuration.
    I have 2 sunfire v240's. One has a single 1 Ghz cpu and the second has
    dual 1.5 Ghz cpu. I want to move the disks of the single cpu host to
    the host with dual cpu's. I want to keep the installed version of
    Solaris 10 intact. The installation of Solaris is split across 2
    mirrored disks, i.e. 4 disks in total. I am using Suns volume manager
    for mirroring and also have one files system mirrored with zfs.
    The questions I have are the following:
    1) Can I simply shut down the servers and swap the disks to the
    destination host, in the same disk slots? The controllers the disks are
    on line up and are the same between the 2 hosts.
    2) Will the kernel pickup the changes moving from a single 1 Ghz cpu to
    dual 1.5. Ghz cpu's with out any problems? Will the kernel pickup the
    faster cpu's speeds. i.e. will it know it is now running dual 1.5. Ghz
    cpu opposed to a single 1 Ghz?
    3) Would we have to break the mirroring on the OS before shutting it
    down?
    4) As another option, instead of swapping disks, could we swap the
    cpus? Move the dual 1.5. Ghz cpu's to the other host? Will the
    motherboards read the updates of the cpu or are their jumper settings we
    would need to update?
    Thanks for your help.

    Box A
    Sparc Solaris 9, Oracle 10g
    Box B
    Solaris 10 x86, Oracle 11g
    I know there are many factors, but I'm pretty new to both unix & oracle, so I >needed some general steps to get me started. You have many options.
    Since you're in 10g, Have the Target Database created in Solaris 10 x86, Oracle 11g.
    you can use,
    RMAN - Cross platform Transportable Tablespaces.
    Datapump Export and Datapump import.
    Read the following:
    How To Use RMAN CONVERT DATABASE for Cross Platform Migration - 413586.1
    http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm
    http://www.oracle-base.com/articles/10g/OracleDataPump10g.php
    http://www.oracle-base.com/articles/10g/RMANEnhancements10g.php#cross_platform_tablespace_conversion

  • Any success or regret stories about a total switch from Avid to FCP?

    Any success or regret stories about a total switch from Avid to FCP?
    Mac Pro   Mac OS X (10.4.8)   Final Cut Studio 5.1

    I'm currently working on a job in a facility that has 3 FCP systems and uses Terrablock networked storage. I was 3 months here so I saw a lot of the good and bad with this system. It's Fiber channel so quite fast but there were a lot of issues with the compability of the OS. When working it worked well. The Avid Unity systems are very solid and proven.
    The biggiest issue I have with FCP in this enviroment is it's great if you keep a project on the same system but when you start moving edits around then you get into the media managment limitations of FCP. A large project with lots of media, audio, gfx of different types, lots of renders, can be a pain when moving and reconnect on a different system. In theory it should be flawless as you point back to the proper folders and drives but it rarely is. It can be done is just takes time. And the better the editor is with his/her media managment then the easier it is. Avid's media managment works much different so by nature it's a bit easier in the networked world. We'll see what FCP has at NAB to make this better.
    Bottom line, FCP vs. Avid is a debate that will rage. I use and enjoy them both on an almost weekly basis so I can argue the + an - of both. They are both tools, same buttons, different places.

  • I am just switched from C to VC6, I want to develop an applicati

    on for online data acquisition and display. My understanding is that NI-DAQ software will only be used for Console Application in VC6. Can I use NI-DAQ functions for MFC AppWizard (exe)? Please guide me how can I use these functions in MFC AppWizard (exe)?My operationg system is Windows 98, I am developing an online data acquisition and GUI using PCI-1200 card in VC6++. I previously developed the data acquision system in C language using Lab-PC+. I am just switched from C to VC6, I want to develop an application for online data acquisition and display. My understanding is that NI-DAQ software will only be used for Console Application in VC6. Can I use NI-DAQ functions for MFC AppWizard (exe)? Please guide
    me how can I use these functions in MFC AppWizard (exe)?

    on for online data acquisition and display. My understanding is that NI-DAQ software will only be used for Console Application in VC6. Can I use NI-DAQ functions for MFC AppWizard (exe)? Please guide me how can I use these functions in MFC AppWizard (exe)?You should be able to generate a project using either the MFC AppWizard or the NI Measurement Studio AppWizard, then follow the steps in the NI Knowledge Base article How to Compile and Run NI-DAQ Examples with Microsoft Visual C++ starting with step 4. Other NI Knowledge Base articles that might be helpful in getting started are How Can I Do Data Acquisition with Measurement Studio in Visual C++? and How Do I Install Examples for Visual Basic, Visual C++, and Delphi with
    NI-DAQ 6.8 (or higher)?.
    - Elton

  • BEEN TRYING TO SWITCH FROM SKY UNLIMITED TO INFINI...

    The grass is not always greener on the other side! Althought it certainly looked that way when I decided to switch provider to take advantage of the BT Sport package.
    I ordered the full monty Infinity, Phone, Broadband and TV package and did so via a cashback website. Strangely the next day they created separate order for just a phone install and my cashback track "failed". (saving BT £120). Although I've waited so long now I launched an investigation using my own evidence to Quidco and it was granted again!
    My Phone line was switched over pretty quickly (realised later that once your phone line has been switched to BT, to switch back to Sky and use their equipment at the exchange would cost a fee of £50! grrr). So I started to feel a little trapped. But tried to be positive.
    Unfortunately nothing else happened. I called BT who initially denied there was any order for anything else. Luckily I keep screen shots/emails + original details of my order much to their embarassment. They apologised but insisted they should put order again immediately on phone. (which would have saved BT more cashback but I said no thanks I will do it online). I tried to cancel everything but here I was told I would have to pay £50 to switch phone line back. The cheek! Trapped.
    I got a date 23rd of July for my switch over to Infinity, BT Vision Box arrived, engineer booked in on a 8am-1pm slot. Things were looking positive. Took day off and engineer was late but he did ring me to warn me in his defence. He seemed very competent and knowledgeable. After 5 hours though he said he had to leave and that he couldn't get it working although he thinks he cleared a fault on the line. I'm in IT and had a friend who used to be Openreach engineer. So we discussed in detail the situation.
    Obviously I do not know for sure, but appears that my FTTC service was a no go because the local Cabinet had no spare ports only five broken ones (he tried about 3 of these). He said he was not sure when more would be provisioned. (I thought surely in advance they would reserve one or check this!). Imagine ordering a Tesco grocery delivery only for the driver to turn up saying unfortunately they didnt have anything for me.
    But asI had been messed about for 6 weeks I thought BT will be straight back tomorrow to fix this. Engineer told me I would get a call next day. Heard nothing. I rang up 2 days later to be told the engineers were "deciding" what to do next. Never got a call back.
    Unfortunately thats where I have been ever since. Only yesterday was I promised a new engineer on 14th of July after another two calls I made to India and 40 mins on phone talking to very nice but time consuming operators:
    KULJEET FINGH (promised me a call back)
    SWATI KUMARI - very helpful and believes she has fixed this.
    I have had about 3 missed calls from scottish sounding customer service reps but they do not leave me a number to reach them. When I do call I get the India overflow or level 1 scripted service who don't know anything about the voicemails I received or my previous calls. Each calls takes ages to get through navigation then explain the situation.
    So now I am thinking to myself, why oh why should I let them make me wait about another two weeks. I am struggling to find a reason to stick with BT.
    Should I give up and give let Sky try and install Fibre?

    Well I have an update. I decided to stay as I was so far down the road. They gave me an engineer appointment of 14 of August which was totally disgusting.
    I rang up to complain and was promised a call back as they tried to expediate my request. Never happened.
    Whilst on these calls I also questioned the validity of sending another engineer unless they first checked that my local cabinet hard an available fibre port. I was promised and promised that they would put the notes on the call and it would not be a wasted engineer visit.
    Engineer came today. Wasted visit - no ports on the cabinet.
    He was not even sure why he was sent there knowing there were no ports. Talk about the blind leading the blind.
    The incompetency of this corporation is absolutely astounding even when their customers are telling them they are going to fail they lie to your face just to appease you on the phone and move you on.
    So I ordered my switch from sky to BT on June 6th.. and so far all I have is a phone line.
    On top of this I noticed that they have charged me a late payment fee by DD and full line rental for first month. BT were so slow at installing it all that my up front line rental apparently did not cover their initialy switch over. Despite telling me I would not be charged I have been charged.
    Now as a web designer I am now tempted to create basic website and use my SEO skills to push it to top of google rankings sharing with everyone of my experience of BT.

  • I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

     I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.  
    I am currently using Photoshop Elements 8 on Windows 7.  After several years of use, I am self taught and adequately proficient for an amateur.  What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing. 
    Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust.  Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom.  Frankly, I'm thinking that it would be smoother to stay within the Apple product line. 
    So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies).  But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
    - If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?  
    - if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?  
    - Can it splice together several separate photos to give a panoramic?  
    If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not  support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).  
    Thanks in advance for your consideration and help! 

    I am concerned, however,  about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
    Thanks for any insight on this
    Amy,
    Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
    One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
    The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
    Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
    One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

  • How can I switch from auto_login wallet to password-protected encryption wallet in 12c  ?

    How can I switch from auto_login wallet to password-protected encryption wallet in 12c
    --Now the autologin wallet is in effect
    SQL> select * from v$encryption_wallet
      2  ;
    WRL_TYPE
    WRL_PARAMETER
    STATUS       WALLET_TYPE    WALLET_OR FULLY_BAC
        CON_ID
    FILE
    /acfs3/wallet
    OPEN       AUTOLOGIN    SINGLE    NO
      0
    --I need to export the keys and it informs me to use password-based keystore
    SQL> ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234";
    ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234"
    ERROR at line 1:
    ORA-28417: password-based keystore is not open
    --So I try to close the autologin keystore and open the password-based keystore, but the autologin keystore cannot be closed
    SQL>  administer key management set keystore close;
    administer key management set keystore close
    ERROR at line 1:
    ORA-28365: wallet is not open
    SQL> administer key management set keystore open identified by "tde_1234";
    administer key management set keystore open identified by "tde_1234"
    ERROR at line 1:
    ORA-28354: Encryption wallet, auto login wallet, or HSM is already open
    So My question is
    How to switch from auto_login keystore to password-protected keystore ?

    Remove the cwallet.sso file and check the wallet status in v$encryption_wallet.
    If it is not opened, try to open it with administer key statement.
    Check the status again.

Maybe you are looking for