Solaris 9: Xsun process using over 47% of CPU

Anyone else having this problem?
The /usr/openwin/bin/Xsun process is consistently using over 47% of the CPU
on a Sun Fire V240 running Solaris 9. This system was just built last week
with all recommended patches. In the past 24 hours it has accumulated 1341:35
of execution time according to ps. It is now up to 1350:08 in the time it took me
to finish this message.

I had a similar problem with my v240 with my XVR-100 frame buffer, and was told that there is an incident that is not closed in a security patch for this, and that the work around was as follows:
mkdir /etc/dt/config
cp /usr/dt/config/Xconfig /etc/dt/config
cp /usr/dt/config/Xsetup /etc/dt/config
add "/usr/openwin/bin/xset -fbpm" to the end of /etc/dt/config/Xsetup
edit /etc/dt/config/Xconfig and change
Dtlogin*setup: Xsetup
to
Dtlogin*setup: /etc/dt/config/Xsetup

Similar Messages

Kernel_task is using over 300% of CPU

Hi,
Kernel_task is using over 300% CPU and my Macbook Pro is running really slowly as a result. I have reset SMC and PRAM, done an Apple hardware test, Cleaned with onyX, hoovered the fans and restored with time machine, all to no avail. Can anyone please help or suggest anything I can try?
Thanks

Hi,
Kernel_task is using over 300% CPU and my Macbook Pro is running really slowly as a result. I have reset SMC and PRAM, done an Apple hardware test, Cleaned with onyX, hoovered the fans and restored with time machine, all to no avail. Can anyone please help or suggest anything I can try?
Thanks

Ruby Process using 80% or more CPU

Granted, I'm running Leopard Server on an old machine, but still. they Ruby process is keeping the CPU pretty well pinned, as it regularly uses more that 80% CPU.
Is it doing OS work, or can I disable it if I am not using it? Any ideas on how?
CK

https://discussions.apple.com/message/23685234?tstart=0#23685234
Hope this helps you!!
Stuart

Tasks using over 100% of CPU?

There are a few Root tasks that occasionally use more than 100% of my CPU according to my Activity Monitor. One of them was at 148% at one point.
There is usually just one Root task that uses that much CPU whenever I open my Macbook from sleep or it just happens at random times. And the only way to stop it is to force quit the task that is making it do that. It all started after I was ripping a DVD using iSkySoft and it froze so I had to force quit. Once it quit, the CPU problem came up.
Why does it do this? Do I just have to check the Activity Monitor every now and then to delete the Root tasks that use a lot of CPU? Is there a way to permanently make it stop?

Well the root task problem stopped but now I just turned on the computer and Finder was using about 80% CPU for some reason but it seems to be working now after I quit it in Activity Monitor and brought it back up again.

Web browser processes use over 100% CPU (OS 10.6.8)

Hey, I know this problem has come up a lot in the last couple of years, but I've looked everywhere, at every thread and possible solution to my problem and none have ever worked, so as a last resort I'm going to just straight up ask bout again and hope I'm missing something.
So whenever anything on my browser is moving, wether it be Flash, HTML 5, Java or even an embedded video, on every browser I've tried from Opera to Safari and every time it will put two or three processes related to the browser up to 60%, usually amounting to over 120%. I have tried doing a fresh install of Snow Leopard, which only softened the problem for a small while. This problem, and a couple others started happening after the 10.6.8 update was installed. I have never installed Safar Extensions, I have fixed permissions, cleared caches, binned files, tried running Safari under 32-bit and 32-bit Rosetta.
Nothing works. After 20 seconds of a youtube video my macbook will freeze and ask me to hold down the power button. If I download the video through activity and play it in VLC it's fine. If I play it in Quicktime it's fine for 20 seconds and then the video stutters and slows right down before the audio stops and Quicktime refuses to play anything unless it's closed.
Among other problems caused by the update: Alt 3 is no longer hash, it just turns my cursor into a crosshair temporarily and MDS/MDworker sometimes randomly decide they're going to join in on the rogue processes for a while. I'm so close to having to sell a bunch of stuff in order to get a laptop so I can finish my uni course, it's particularly horrible knowing that I rely on my macbook for all my university work and gigs yet it's been letting me down so much.
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          2 GB

Oh, I posted this to the Macbook forum as it's ambiguous whether the update caused a hardware/software confliction, since a fresh install of Snow Leopard did not work.

Sockd process uses a lot of CPU time

Hi,
I'm running the Sun Java System Web Proxy Server version 4.02 on a SunFire V210 dual processor box running Solaris 10 with the default socks5.conf for testing.
Just browsing a few web pages in Firefox or IE using the socks proxy boosts CPU usage from the sockd process to a staggering 50% and stay there for several minutes.
Comparing with the old NEC reference Socks5 daemon the Sun version is really performing badly.
The system is pretty standard though I have tuned /etc/system and the tcp stack using recommendations in the proxy administration manual. All Solaris 10 patches are installed.
prstat output:
   PID USERNAME SIZE   RSS STATE PRI NICE      TIME CPU PROCESS/NLWP
24519 proxy    6664K 4384K cpu1     0   10   0:11:18 50% sockd/43Any ideas what's wrong or do I have to stick with the old NEC reference daemon?
Regards
Kasper L�vschall

Using:
truss -dlfo truss.out ./sockd-wdog
Where things begin to happen:
5259/1:          11.2858     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          12.2958     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          13.3058     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          14.3158     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/2:          15.1858     pollsys(0xFEAEFDC8, 1, 0xFEAEFD58, 0x00000000)     = 0
5259/1:          15.3258     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/2:          pollsys(0xFEAEFDC8, 1, 0xFEAEFD58, 0x00000000) (sleeping...)
5259/1:          lwp_park(0xFFBFF290, 0)          (sleeping...)
5259/1:          16.3359     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/1:          lwp_park(0xFFBFF290, 0)          (sleeping...)
5259/1:          17.3459     lwp_park(0xFFBFF290, 0)                    Err#62 ETIME
5259/2:          18.2382     pollsys(0xFEAEFDC8, 1, 0xFEAEFD58, 0x00000000)     = 1
5259/2:          18.2385     accept(3, 0xFEAEFEC8, 0xFEAEFE64, SOV_DEFAULT)     = 5
5259/2:          18.2386     lwp_unpark(43)                         = 0
5259/43:     18.2386     lwp_park(0x00000000, 0)                    = 0
5259/2:          18.2388     accept(3, 0xFEAEFEC8, 0xFEAEFE64, SOV_DEFAULT)     Err#11 EAGAIN
5259/43:     18.2389     getsockname(5, 0xFE5AFEA8, 0xFE5AFDA4, SOV_DEFAULT) = 0
5259/43:     18.2391     getpeername(5, 0xFE5AFE38, 0xFE5AFDA4, SOV_DEFAULT) = 0
5259/43:     18.2391     read(5, 0x00063B7E, 1)                    Err#11 EAGAIN
5259/43:     18.2407     pollsys(0xFE5AFD08, 1, 0xFE5AFCA0, 0x00000000)     = 1
5259/43:     18.2408     read(5, "04", 1)                    = 1
5259/43:     18.2409     read(5, "01\0 P BF9 ] c", 7)               = 7
5259/43:     18.2411     read(5, " k l\0", 255)                    = 3
5259/43:     18.2412     write(4, " [ 0 1 / M a r / 2 0 0 6".., 88)     = 88
5259/43:     18.2413     so_socket(PF_INET, SOCK_STREAM, IPPROTO_IP, "", SOV_DEFAULT) = 6
5259/43:     18.2414     fcntl(6, F_GETFL)                    = 2
5259/43:     18.2415     fcntl(6, F_SETFL, FWRITE|FNONBLOCK)          = 0
5259/43:     18.2416     bind(6, 0xFE5AF980, 16, SOV_SOCKBSD)          = 0
5259/43:     18.2418     connect(6, 0xFE5AF910, 16, SOV_DEFAULT)          Err#150 EINPROGRESS
5259/43:     18.2970     pollsys(0xFE5AF798, 1, 0xFE5AF730, 0x00000000)     = 1
5259/43:     18.2971     getsockopt(6, SOL_SOCKET, SO_ERROR, 0xFE5AF6D0, 0xFE5AF6D4, SOV_DEFAULT) = 0
5259/43:     18.2972     getsockname(6, 0xFE5AF980, 0xFE5AF8A4, SOV_DEFAULT) = 0
5259/43:     18.2973     write(5, "\0 Z918782E1 511", 8)               = 8
5259/43:     18.2974     lwp_unpark(3)                         = 0
5259/3:          18.2974     lwp_park(0x00000000, 0)                    = 0
5259/3:          18.2977     brk(0x00064850)                         = 0
5259/3:          18.2977     brk(0x00078850)                         = 0
5259/3:          18.2981     pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0
5259/3:          18.2982     pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0
5259/3:          18.2983     pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0Then loades of pollsys(0xFEACF458, 50, 0xFEACF3E8, 0x00000000)     = 0 until I kill the daemon - seems like they are killing the server?
Thanks,
Kasper

Screen Sharing and WindowServer processes using 35-45% of CPU!!

I have recently relocated and reconfigured my Apple network and computers in the house :1) MacBook Air dual display MBA with 20" cinema screen in the office, and 2) and Mac Mini connected to a large LCD TV in the living room.
The plan now is to use the MBA as a primary computer and connect via wireless screen sharing to the MM so that I can monitor that system, run more intensive apps, watch EyeTV, file server tasks, etc.
But now this has increased CPU and fan activity on the MBA beyond what I would expect. The activity monitor indicates that the Screen Sharing and WindowServer processes are using combined between 35-45% of the CPU (screen share process is a constant 25%!!).
This is not good, and I wonder if it will be fixed in a future release. Any ideas or suggestions on how to limit the impact of screen sharing on CPU?

It seems to be running better with system update, and use of a faster computer (now using the higher end mac book air)

Systemd-journal process using 100% of one cpu core after reboot

journalctl -b showed
"Process 2016 (virtuoso-t) dumped core."
more than a few times and virtuoso-t would was using more cpu than it does most of the time.
at 14 minutes of uptime systemd-journal stopped using 100% and went back to normal. Anyone know a way to figure out what happened here?
update:
systemd-coredump[3182]: Process 3133 (virtuoso-t) dumped core.
systemd-journal[5407]: Permanent journal is using 2.6G (max allowed 4.0G, trying to leave 4.0G free of 50.7G available → current limit 4.0G).
systemd[1]: systemd-journald.service watchdog timeout!
systemd[1]: Starting Journal Service...
systemd[1]: systemd-journald.service stop-sigterm timed out. Killing.
systemd[1]: Starting Journal Service...
systemd[1]: systemd-journald.service: main process exited, code=killed, status=9/KILL
systemd[1]: Unit systemd-journald.service entered failed state.
systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
systemd[1]: Stopping Journal Service...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journal[5407]: Journal started
dbus[365]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
dbus[365]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
systemd-coredump[3289]: Process 3235 (virtuoso-t) dumped core.
it happened again here is what the journal was saying while it was happening (i removed lots of (virtuoso-t) dumped core that happened ... 10 or more times)
Thanks in advance,
Wolf Larson
Last edited by wolflarson (2014-03-22 15:36:37)

In the Newbie Corner of the forums, there are a few stickied threads that are recommended reads. One of which is this one.
If the logs are not too too much, then it can be posted here with code tags. If it is crazy big, pastebin it and then post the link.
If this is really all the information it gives about the journal being nuts, then you might want to enable debug levels of logging for the journal and then see if you can gather more information that way. This can either by done by using a drop-in snippet to the unit file, or by turning on debug levels for the entire system from the kernel command line.
The journal is not designed in such a way that it can be continously written to. There are safeguards in place to ensure that masively spamming services are cut off after a certain number of log messages in a given timeframe. Additionally, even the flush from the journal in RAM to the disk is only done periodically.

IPhoto 9.3 using over 60% of CPU usage

Sinec the upgrade to iPhoto 9.3 it hogs CPU usage over 60% getting beach balls etc.
I have to quit just so I can use the Mac with other applications.
OS 10.7.4 8GB RAM 400GB free on HD new fitted only a week ago.
I do use Aperture and they share a library.. Anyone having the same issue? or anyone
with any suggestions?
Cheers all,

Make a temporary, backup copy of the library if you don't have one (select the library and type Command+D) and apply the fix below:
Fix
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4.
Launch iPhoto after each rebuild and see if there's any improvement.
OT

Long running processes using a lot of CPU

Hi all,
We have a clustered environment and on both the DB nodes there are processes that is taking a lot of CPU and runs a really long time. The load of the servers get really high and performance degrades drastically.
I've traced the processes and the module is usually a combination of the following:
icx.por.rcv.server.ReceiveItemsAM
icx.por.reqmgmt.server.ReqMgmtAM
I know it has something to do with Purchase Orders.
Can someone please give me more info on this processes and what I can do about them?
Thanks in advance.

..Step by Step to fix your Mac
They will just say it's a software problem you need to fix most likely.
However if you have exhausted your software fixes and/or Hardware Test gives something, it could be a hardware problem, but likely it's software for what your mentioning.

CSCsi78581 - Hulc LED Process uses 10-15 percent CPU on Catalyst 3750/3560 - 10

I have the same issue, but now is in 3750E with IOS
15.0(1)SE3 does anybody see this bug in this version of IOS ?
      345433434433338833333333444433353433343334433433333533796763
      829698281199793397776998091576799099908973089099999499163527
100                                                        *
   90                                                        *
   80               **                                       * *
   70               **                                      ** *
   60   *           **               *                      ****
   50   **          **         * *   *                   * *##*
   40 *###**#******###*********###****###**#***##*##*###########
   30 ##########################################################
   20 ##########################################################
   10 ##########################################################
     0....5....1....1....2....2....3....3....4....4....5....5....6
               0    5    0    5    0    5    0    5    0    5    0
               CPU% per minute (last 60 minutes)
              * = maximum CPU%   # = average CPU%
173 1360214457   674705267       2016 19.68% 19.77% 19.76%   0 Hulc LED Process

I see this issue on a Catalyst 3560X-48P running IOS 15.0(2)SE2.
switch#show proc cpu sorted
CPU utilization for five seconds: 44%/0%; one minute: 42%; five minutes: 41%
PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
171 3074931895   362854359       8474 20.31% 20.10% 20.00%   0 Hulc LED Process

How to kill Forms Runaway Process using 95% CPU and running for 2 hours.

We had a situation at E-Business Suite customer (using Oracle VM server) where some of Form processes were not being cleared by form timeout settings automatically.
Also when user exits the form session from front end, the linux form process (PID) and DB session did not exit properly, so they got hung.
They were spiking CPU and memory usage and causing e-business suite to perform slowely and ultimately causing VM host to reboot the production VM guest (running on Linux).
We could see the form processes (PIDs) using almost 100% cpu with "top" command and running for a long time.
Also we verified those Form Sessions did not exist in the application itself.
ie. Using from Grid Control -> OAM-> Site Map -> Monitoring (tab) -> "Form Sessions".
It means that we could safely kill that form process from Linux using "kill -9 <PID>" command.
But that required a continuous monitoring and manual DBA intervention as customer is 24x7 customer.
So, I wrote a shell script to do the following;
•     Cron job runs every half an hour 7 days a week which calls this shell script.
•     Shell script runs and tries to find "top two" f60webmx processes (form sessions) using over 95% cpu with 2 minutes interval.
•     If no process is found or CPU% is less than 95%, it exits and does nothing.
•     If top process is found, it searches for its DB session using apps login (with hidden apps password file - /home/applmgr/.pwd).
a.     If DB session is NOT found (which means form process is hung), it kills the process from unix and emails results to <[email protected]>
b.     If DB session is found, it waits for 2 hours so that form process times automatically via form session timeout setting.
It also emails the SQL to check the DB session for that form process.
c.     If DB session is found and it does not timeout after 2 hours,
it kills the process from unix (which in turn kills the DB session). Output is emailed.
This are the files required for this;
1. Cron job which calls the shell script looks like this;
# Kill form runaway process, using over 95% cpu having no DB session or DB session for > 2hrs
00,30 * * * * /home/applmgr/forms_runaway.sh 2>&1
2. SQL that this script calls is /home/applmgr/frm_runaway.sql and looks like;
set head off
set verify off
set feedback off
set pagesize 0
define form_client_PID = &1
select count(*) from v$session s , v$process p, FND_FORM_SESSIONS_V f where S.AUDSID=f.audsid and p.addr=s.paddr and s.process='&form_client_PID';
3. Actual shell script is /home/applmgr/forms_runaway.sh and looks like;
# Author : Amandeep Singh
# Description : Kills runaway form processes using more than 95% cpu
# and Form Session with no DB session or DB session > 2hrs
# Dated : 11-April-2012
#!/bin/bash
. /home/applmgr/.bash_profile
PWD=`cat ~/.pwd`
export PWD
echo "`date`">/tmp/runaway_forms.log
echo "----------------------------------">>/tmp/runaway_forms.log
VAR1=`top -b -u applmgr -n 1|grep f60webmx|grep -v sh|grep -v awk|grep -v top|sort -nrk9|head -2|sed 's/^[ \t]*//;s/[ \t]*$//'| awk '{ if ($9 > 95 && $12 = "f60webmx") print $1 " "$9 " "$11 " "$12; }'`
PID1=`echo $VAR1|awk '{print $1}'`
CPU1=`echo $VAR1|awk '{print $2}'`
TIME1=`echo $VAR1|awk '{print $3}'`
PROG1=`echo $VAR1|awk '{print $4}'`
PID_1=`echo $VAR1|awk '{print $5}'`
CPU_1=`echo $VAR1|awk '{print $6}'`
TIME_1=`echo $VAR1|awk '{print $7}'`
PROG_1=`echo $VAR1|awk '{print $8}'`
echo "PID1="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
echo "PID_1="$PID_1", CPU%="$CPU_1", Running Time="$TIME_1", Program="$PROG_1>>/tmp/runaway_forms.log
echo " ">>/tmp/runaway_forms.log
sleep 120
echo "`date`">>/tmp/runaway_forms.log
echo "----------------------------------">>/tmp/runaway_forms.log
VAR2=`top -b -u applmgr -n 1|grep f60webmx|grep -v sh|grep -v awk|grep -v top|sort -nrk9|head -2|sed 's/^[ \t]*//;s/[ \t]*$//'| awk '{ if ($9 > 95 && $12 = "f60webmx") print $1 " "$9 " "$11 " "$12; }'`
PID2=`echo $VAR2|awk '{print $1}'`
CPU2=`echo $VAR2|awk '{print $2}'`
TIME2=`echo $VAR2|awk '{print $3}'`
PROG2=`echo $VAR2|awk '{print $4}'`
PID_2=`echo $VAR2|awk '{print $5}'`
CPU_2=`echo $VAR2|awk '{print $6}'`
TIME_2=`echo $VAR2|awk '{print $7}'`
PROG_2=`echo $VAR2|awk '{print $8}'`
HRS=`echo $TIME1|cut -d: -f1`
exprHRS=`expr "$HRS"`
echo "PID2="$PID2", CPU%="$CPU2", Running Time="$TIME2", Program="$PROG2>>/tmp/runaway_forms.log
echo "PID_2="$PID_2", CPU%="$CPU_2", Running Time="$TIME_2", Program="$PROG_2>>/tmp/runaway_forms.log
echo " ">>/tmp/runaway_forms.log
# If PID1 or PID2 is NULL
if [ -z ${PID1} ] || [ -z ${PID2} ]
then
echo "no top processes found. Either PID is NULL OR CPU% is less than 95%. Exiting...">>/tmp/runaway_forms.log
elif
# If PID1 is equal to PID2 or PID1=PID_2 or PID_1=PID2 or PID_1=PID_2
[ ${PID1} -eq ${PID2} ] || [ ${PID1} -eq ${PID_2} ] || [ ${PID_1} -eq ${PID2} ] || [ ${PID_1} -eq ${PID_2} ];
then
DB_SESSION=`$ORACLE_HOME/bin/sqlplus -S apps/$PWD @/home/applmgr/frm_runaway.sql $PID1 << EOF
EOF`
echo " ">>/tmp/runaway_forms.log
echo "DB_SESSION ="$DB_SESSION >>/tmp/runaway_forms.log
# if no DB session found for PID
if [ $DB_SESSION -eq 0 ] then
echo " ">>/tmp/runaway_forms.log
echo "Killed Following Runaway Forms Process:">>/tmp/runaway_forms.log
echo "-------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "PID="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
kill -9 $PID1
#Email the output
mailx -s "Killed: `hostname -a` Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
else
# If DB session exists for PID
if [ ${exprHRS} -gt 120 ]; then
echo $DB_SESSION "of Database sessions exist for this forms process-PID="$PID1". But its running for more than 2 hours. ">>/tmp/runaway_forms.log
echo "Process running time is "$exprHRS" minutes.">>/tmp/runaway_forms.log
echo "Killed Following Runaway Forms Process:">>/tmp/runaway_forms.log
echo "-------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "PID="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
kill -9 $PID1
#Email the output
mailx -s "`hostname -a`: Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
else
echo "Process running time is "$exprHRS" minutes.">>/tmp/runaway_forms.log
echo $DB_SESSION "of Database sessions exist for PID="$PID1" and is less than 2 hours old. Not killing...">>/tmp/runaway_forms.log
echo "For more details on this PID, run following SQL query;">>/tmp/runaway_forms.log
echo "-----------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "set pages 9999 lines 150">>/tmp/runaway_forms.log
echo "select f.user_form_name, f.user_name, p.spid DB_OS_ID , s.process client_os_id,, s.audsid, f.PROCESS_SPID Forms_SPID,">>/tmp/runaway_forms.log
echo "to_char(s.logon_time,'DD-Mon-YY hh:mi:ss'), s.seconds_in_wait">>/tmp/runaway_forms.log
echo "from v\$session s , v\$process p, FND_FORM_SESSIONS_V f">>/tmp/runaway_forms.log
echo "where S.AUDSID=f.audsid and p.addr=s.paddr and s.process='"$PID1"' order by p.spid;">>/tmp/runaway_forms.log
mailx -s "`hostname -a`: Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
fi
fi
else
#if PID1 and PID2 are not equal or CPU% is less than 95%.
echo "No unique CPU hogging form processes found. Exiting...">>/tmp/runaway_forms.log
cat /tmp/runaway_forms.log
fi
If you have the same problem with some other unix and DB processes, the script can be easily modified and used.
But use this with thorough testing first (by commenting out <kill -9 $PID1> lines.
Good luck.
Edited by: R12_AppsDBA on 19/04/2012 13:10

Thanks for sharing the script!
Hussein

In the process of reformatting my macbook pro, I saved everything but my keyword list. The keywords are with the images, but the total list I use under "Keywords" is not present. Is there a way to re-create all my keywords I've used over the last 6 year

In the process of reformatting my macbook pro, I saved everything but my keyword list. The keywords are with the images, but the total list I use under "Keywords" is not present. Is there a way to re-create all my keywords I've used over the last 6 years.

I accomplished what I needed last night. I remembered I had picked my favorite images from each year and put them in a "favorite" folder by year. These folders included 500 to 1200 images per year. I pulled up the folder for each year and highlighted all images and clicked on "Keywords" and all keywords used for all images were listed. I made those keywords persistent. It took me a while to realize I had to click on each keyword to make it persistent. After doing this for all years, I assume 95% of all keywords I have used over the many years were back in my list. I'm sure there is probably a more "technical" way to accomplish what I needed, but this seems to have worked. I also exported my list into a word document and is saved on my hard drive.
If I had not made folders with my favorite images for each year, I could not have used this method, so if you figure out a better way, I like to hear it. Thanks for your comments and willingness to help.

Not able to stop OPMN processes using OPMNCTL on AS 10.1.2.0.2

Hello,
When trying to stop opmnctl processes using opmnctl following error is coming
$ opmnctl stopall
opmnctl: stopping opmn and all managed processes...
================================================================================
opmn id=appsdev2.mpmkvvcl.com:6201
OPMN is terminating
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Unacceptable request: OPMN is terminating
HTTP/1.1 406 Unacceptable request
Content-Length: 168
Content-Type: text/html
<?xml version='1.0' encoding='ISO-8859-1'?>
<response>
<opmn id="appsdev2.mpmkvvcl.com:6201" http-status="406" http-response="OPMN is terminating">
</opmn>
</response>
$
I also tried opmnctl shutdown but still issue is same.
Please help thanks in advance

Looks like something may have been hung. Kill any process still running after a shutdown of opmn and then delete any left over pids files in the states directory. After that you can do a opmn startall.

Discoveryd process uses 100% CPU - Safari Can't find the server

Hello
Since upgrading to Yosemite, I lose connection to the internet 2 or 3 times a day. (Outlook goes offline at the same time)
This is with a wired connection. (Wi-Fi is turned off)
Safari gives me the "Safari Can't Find the Server" message.
Restarting the computer solves the issue temporarily.
While I'm unable to connect to the internet, Activity Monitor shows a process named "discoveryd" that uses 100% CPU.
Force quitting this process gives me back access to the internet instantly. Unfortunately, I suffered a kernel panic (auto restart) a few minutes after force quitting discoveryd. I'm not 100% sure those 2 are related but it would be an odd coincidence as I never experienced had a single kernel on that system. Haven't tried force quitting that process since.
I'm using this iMac in a work environment. (Connected to a windows file server and exchange)
This issue has been happening 2-3 times a day since the day I upgraded to Yosemite.
Any pointers on what could fix this issue ?
Thanks

Start time: 10:04:31 11/11/14
Model Identifier: iMac11,3
System Version: OS X 10.10 (14A389)
Kernel Version: Darwin 14.0.0
Time since boot: 1:39
SATA
   WDC WD1001FALS-40Y6A0
USB
   USB-PS/2 Optical Mouse (Logitech Inc.)
Diagnostic reports
   2014-10-30 Adobe InDesign CC 2014 hang
   2014-10-30 Adobe InDesign CS6 hang
   2014-10-30 Adobe InDesign CS6 crash
   2014-10-30 FileMaker Pro hang x5
   2014-10-30 Finder crash* x2
   2014-10-30 Finder hang
   2014-10-30 Microsoft Outlook hang
   2014-10-30 iTunes hang
   2014-10-31 Adobe InDesign CC 2014 hang
   2014-11-04 Adobe InDesign CC 2014 crash x2
   2014-11-04 Adobe InDesign CC 2014 hang
   2014-11-04 Adobe InDesign CS6 crash x2
   2014-11-04 Microsoft Excel hang
   2014-11-05 Adobe InDesign CS6 hang
   2014-11-05 FileMaker Pro hang
   2014-11-10 Adobe InDesign CC 2014 hang
   2014-11-10 FileMaker Pro hang
   2014-11-11 Adobe Illustrator hang
    * Code injection
Log
   Nov 5 08:25:33 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 5 10:07:01 process discoveryd[49] thread 1190 caught burning CPU! It used more than 50% CPU (Actual recent usage: 82%) over 180 seconds. thread lifetime cpu usage 91.907001 seconds, (77.250009 user, 14.656992 system) ledger info: balance: 90001960650 credit: 91780798965 debit: 1778838315 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 109240779280
   Nov 5 10:09:03 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 5 11:46:47 process discoveryd[49] thread 1256 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 91.591946 seconds, (75.959886 user, 15.632060 system) ledger info: balance: 90000109700 credit: 91486467544 debit: 1486357844 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90105095085
   Nov 5 11:54:53 PM notification timeout (pid 275, Creative Cloud)
   Nov 5 11:54:53 PM notification timeout (pid 344, Adobe CEF Helper)
   Nov 5 11:54:53 PM notification timeout (pid 343, Adobe CEF Helper)
   Nov 5 12:35:03 jnl: b(1, 2): replay_journal: from: 57934848 to: 61127168 (joffset 0x1721c000)
   Nov 5 12:35:03 jnl: b(1, 2): journal replay done.
   Nov 5 12:38:37 jnl: b(1, 2): replay_journal: from: 61127168 to: 67488768 (joffset 0x1721c000)
   Nov 5 12:38:37 jnl: b(1, 2): journal replay done.
   Nov 5 12:38:40 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 5 13:26:28 process mdworker32[357] thread 8766 caught burning CPU! It used more than 85% CPU (Actual recent usage: 86%) over 40 seconds. thread lifetime cpu usage 81.048638 seconds, (76.580865 user, 4.467773 system) ledger info: balance: 34001309838 credit: 80940733771 debit: 46939423933 limit: 34000000000 (85%) period: 40000000000 time since last refill (ns): 39339579198 [fatal violation]
   Nov 5 14:26:53 PM notification timeout (pid 231, Creative Cloud)
   Nov 5 14:26:53 PM notification timeout (pid 325, Adobe CEF Helper)
   Nov 5 14:26:53 PM notification timeout (pid 326, Adobe CEF Helper)
   Nov 5 14:45:49 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 5 14:45:49 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 5 14:47:27 process discoveryd[49] thread 1023 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 91.572722 seconds, (77.540749 user, 14.031973 system) ledger info: balance: 90015163759 credit: 91483527972 debit: 1468364213 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90121915160
   Nov 5 15:13:33 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 6 08:25:36 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 6 11:59:36 PM notification timeout (pid 286, Creative Cloud)
   Nov 6 11:59:36 PM notification timeout (pid 355, Adobe CEF Helper)
   Nov 6 11:59:36 PM notification timeout (pid 356, Adobe CEF Helper)
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 smbsmb2_sm2_b_parse_smchabnge_no_tipfary: ssmb_er_chq_replya failngeed_n ot6if0
   Nov 6 12:29:24 y: smb_rq_reply failed 60
   Nov 6 12:29:24 smb2_ssmmb2_b_spmabr_sparsee_c_hancgeh_naotinfgy: smb_rq_re_epnlyoti failfedy :60 sm
   Nov 6 12:29:24 b_rq_reply failed 60
   Nov 6 12:29:24 rs failed Qsmumber2b_sy m_Inrqfbo __pa60rr
   Nov 6 12:29:24 rse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 ply failed 60smb2_smb_parse_change
   Nov 6 12:29:24 _notify: smsmb_rq_reply failb2_ed smb_6parse_0
   Nov 6 12:29:24 ply failed smb2_smb_pa60
   Nov 6 12:29:24 rse_change_nsmb2otif_smy:b_ spmb_rq_reply failedars e_c60han
   Nov 6 12:29:24 ge_notify: smb_smb2_smb_parse_chrqange__repnotify: smb_rly fq_ailed reply failed 60
   Nov 6 12:29:24 smb2_smb_parssmb2_e_smbchange_pa_nrsote_chifany:ge _nosmb_tifrq_y:re smplb_y rq_fareilply failed 60
   Nov 6 12:29:24 y failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 q_reply failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 12:29:24 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 6 14:01:02 process discoveryd[49] thread 1259 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
   Nov 6 15:49:49 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 6 16:10:23 process Adobe InDesign C[435] caught causing excessive wakeups. Observed wakeups rate (per sec): 309; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45011
   Nov 7 08:25:38 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 10 09:28:46 process discoveryd[49] thread 1195 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 152.284113 seconds, (127.648543 user, 24.635570 system) ledger info: balance: 90002963251 credit: 152063056684 debit: 62060093433 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90142287445
   Nov 10 09:42:09 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 10 11:20:45 process discoveryd[49] thread 1182 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 150.526060 seconds, (126.552866 user, 23.973194 system) ledger info: balance: 90000111985 credit: 150369654672 debit: 60369542687 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90164134478
   Nov 10 12:14:06 PM notification timeout (pid 261, Creative Cloud)
   Nov 10 12:14:06 PM notification timeout (pid 332, Adobe CEF Helper)
   Nov 10 12:14:06 PM notification timeout (pid 333, Adobe CEF Helper)
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 y failed 60
   Nov 10 12:43:27 failed mb60
   Nov 10 12:43:27 smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:43:27 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 12:46:06 process WindowServer[121] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
   Nov 10 12:49:29 jnl: b(1, 2): replay_journal: from: 27704832 to: 35355648 (joffset 0x1721c000)
   Nov 10 12:49:29 jnl: b(1, 2): journal replay done.
   Nov 10 12:54:05 jnl: b(1, 2): replay_journal: from: 35355648 to: 40313344 (joffset 0x1721c000)
   Nov 10 12:54:05 jnl: b(1, 2): journal replay done.
   Nov 10 12:54:08 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 10 14:31:43 PM notification timeout (pid 232, Creative Cloud)
   Nov 10 14:31:43 PM notification timeout (pid 327, Adobe CEF Helper)
   Nov 10 14:31:43 PM notification timeout (pid 324, Adobe CEF Helper)
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 : smb_rq_reply failesmbd 2_smb_60
   Nov 10 15:07:47 parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 tify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_nsotify:mb2 sm_b_rq_reply sfailmed b60
   Nov 10 15:07:47 _parse_change_notify: smbsmb2_rq__rsepmb_parsly failee_d ch60ange_notify
   Nov 10 15:07:47 : smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:47:46 process discoveryd[49] thread 1013 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 153.503446 seconds, (128.774521 user, 24.728925 system) ledger info: balance: 90007455004 credit: 153327303891 debit: 63319848887 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90099512937
   Nov 11 08:25:38 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 11 09:38:05 process Adobe InDesign C[553] caught causing excessive wakeups. Observed wakeups rate (per sec): 283; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45017
   Nov 10 14:31:43 PM notification timeout (pid 327, Adobe CEF Helper)
   Nov 10 14:31:43 PM notification timeout (pid 324, Adobe CEF Helper)
   Nov 10 14:31:43 com.apple.dpd: Service exited with abnormal code: 75
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 : smb_rq_reply failesmbd 2_smb_60
   Nov 10 15:07:47 parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 tify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_nsotify:mb2 sm_b_rq_reply sfailmed b60
   Nov 10 15:07:47 _parse_change_notify: smbsmb2_rq__rsepmb_parsly failee_d ch60ange_notify
   Nov 10 15:07:47 : smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:07:47 smb2_smb_parse_change_notify: smb_rq_reply failed 60
   Nov 10 15:47:46 process discoveryd[49] thread 1013 caught burning CPU! It used more than 50% CPU (Actual recent usage: 99%) over 180 seconds. thread lifetime cpu usage 153.503446 seconds, (128.774521 user, 24.728925 system) ledger info: balance: 90007455004 credit: 153327303891 debit: 63319848887 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 90099512937
   Nov 10 16:47:01 com.apple.WebKit.Networking.UUID: Service exited with abnormal code: 1
   Nov 11 08:25:37 com.apple.Kerberos.kdc: Service exited with abnormal code: 1
   Nov 11 08:25:38 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Nov 11 08:56:36 com.apple.dpd: Service exited with abnormal code: 75
   Nov 11 09:38:05 process Adobe InDesign C[553] caught causing excessive wakeups. Observed wakeups rate (per sec): 283; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45017
CPU per process: com.apple.WebKit (UID 501) is using 41.2 %
Daemons
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.adobe.fpsaud
Agents
   com.adobe.CS4ServiceManager
   com.adobe.AdobeCreativeCloud
   com.adobe.ARM.UUID
   com.adobe.ARM.UUID
   com.apple.Safari
   com.adobe.ARM.UUID
   com.google.keystone.user.agent
   com.apple.AirPortBaseStationAgent
App extensions
   com.apple.InternalFiltersXPC
Contents of /Library/LaunchAgents/com.adobe.AdobeCreativeCloud.plist (checksum 461455494)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.AdobeCreativeCloud</string>
    <key>Program</key>
    <string>/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app/Contents/MacOS/Creative Cloud</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app/Contents/MacOS/Creative Cloud</string>
    <string>--showwindow=false</string>
          <string>--onOSstartup=true</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (checksum 4071182229)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
    <dict>
     <key>Label</key>
     <string>com.adobe.AAM.Scheduler-1.0</string>
     <key>Program</key>
     <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
     <key>ProgramArguments</key>
     <array>
        <string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
        <string>-mode=scheduled</string>
     </array>
     <key>StartCalendarInterval</key>
     <dict>
       <key>Minute</key>
       <integer>0</integer>
       <key>Hour</key>
       <integer>2</integer>
     </dict>
    </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 394026997)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    <string>semi-auto</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 4116814193)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    <string>semi-auto</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist (checksum 4209634474)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.apple.Safari</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
    <string>--sync</string>
    <string>com.apple.Safari</string>
    <string>--entitynames</string>
    <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>ThrottleInterval</key>
    <integer>60</integer>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
    </array>
   </dict>
   ...and 1 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 64800286)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.google.keystone.user.agent</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
     <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
     <string>-runMode</string>
     <string>ifneeded</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>3523</integer>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Bad plists
   Library/Preferences/com.apple.iphotomosaic.plist
Listeners
   launchd: afpovertcp
   launchd: afpovertcp
   launchd: microsoft-ds
   launchd: ssh
   launchd: microsoft-ds
   launchd: ssh
   kdc: kerberos
User login items
   Microsoft Outlook
   - /Applications/Microsoft Office 2011/Microsoft Outlook.app
   TransmitMenu
   - /Applications/Transmit.app/Contents/MacOS/TransmitMenu.app
   ClipMenu
   - /Applications/ClipMenu.app
   Dept
   - /Volumes/Dept
   Public
   - /Volumes/Public
   Apps
   - /Volumes/Apps
Restricted files: 4584
Lockfiles: 99
Elapsed time (s): 352

Solaris 9: Xsun process using over 47% of CPU

Similar Messages

Maybe you are looking for