Solaris can't detect new attached hardisks

Hi, i m newbie in Solaris 9. Currently I have installed Solaris 9 with 1 hardisk. So i attached 2 more new hardisks to the server. I create a new directory in root (/) directory. and attached the new hardisks to the Server and reboot. After reboot, from the Solaris Management Console, shown only 1 hardisk, which is current system disk.
May I know how to detect the new attached hardisks in Solaris? Any command recommend? or do u know any other methods can try?
Thanks
Raymond

Hi ,
The following are ways to detect newly attached devices
1) Bring the solaris box to ok promt and run the boot -r.
2) Boot the solaris box into default run level and run devfsadm with option -v
3) Touch /reconfigrue and reboot the solaris box.
Thank you,
Rajesh Kannan R.

Similar Messages

  • Can we  add new attachment outside SC(like from custom page on SoCo PO)  to existing SC ?

    Hi Experts,
    Need your expert advice on the below requirement.
    We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
    We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
    Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size,disp_url etc are not stored properly in DB.
    in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is new attachment is partially updated.
    Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
    I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content,phio_content of new attachment in existing attachment internal table and calling above FM for update.
    Can we  add new attachment outside SC to existing SC ? if yes , then how?
    Thanks,
    Partha

    Your attachments are saved in BBPCONT you can use below steps to check that , I think you can develop a solution inline to the standard architecture. 
    a) Run FM BBP_PD_XX_GETDETAIL
    b) Use GUID from the Export parameter ET_ATTACH-GUID
    c) Use table BBPCONT and pass ET_ATTACH-GUID in step (b) to PHIO_ID .
    d) Then you will have the document content.
    You will get the attachment
    Cheers
    Ankit Jain

  • Solaris Can't detect Quantum SDLT 320 Tape Drive

    Hi All,
    I have a Quantum SDLT 320 connected to Sun Fire v490 which can't be detected in solaris but can be detected in OBP .
    Can someone help about this issue.
    Your prompt response will be very appreciated.

    Hi All,
    Thanks for your help.
    The problem is now solved when i proceeded as followed:
    1. When i executed the command cfgadm -al
    the output showed the below information about the tape drive controller:
    c3              Connected        unconfigured             OK
    I disconnected the controller and then run the devfsadm -c tapes which took about 1 hour to complete and then, now the system can detect and tape and the first backup run
    successfully.

  • G4 DA can't detect new Aluminum Keyboard

    I just got a refurbished Aluminum Keyboard off ebay (MB110LL/A) and it won't detect in either my Power Mac or my CRT iMac. I even plugged it into my wife's XP laptop and it detected it, bu couldn't install the driver. Is there a setting I need to change to get this going or did I just get a defective one?

    Well, that doesn't happen with this keyboard. I have a windows keyboard that does that, when I plug it in, it says that it can't detect the keyboard and to press the button to the right of the shift key to try and detect it. That doesn't happen with the aluminum keyboard. And it still shows up as "vend_device" under the system profiler, which is just weird.

  • Solaris 10 x86:detect new hard drive

    hi.
    I'm on solaris 10 X86, and I added a hdd today. I can see it in the bios, but nothing appears in my solaris' files: vfstab, mnttab...etc.
    nevertheless, it's in the /var/adm/messages:
    genunix: [ID 846691 kern.info]   model IBM-DTLA-305020I tried touch /reconfigure;reboot and reboot -- -r, but still nothing.
    How could I make solaris detect my new hdd please?

    That's ok now.
    I saw my hdd with the format command. After:
    - partition option in the format command
    - created new fs (with newfs)
    - modified /etc/vfstab
    - mounted /<new fs>
    bye.

  • Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

    Hi Experts,
    Need your expert advice on the below requirement.
    We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
    We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
    Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
    in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
    Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
    I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
    Can we  add new attachment outside SC to existing SC ? if yes , then how?
    Thanks,
    Partha

    Hi Partha,
    Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
    Hope this helps
    Cheers,
    Yateesh

  • HT201269 Why the new iTunes can't detect any of my devices(iPhone & iPad)?

    Why when I connect my iPhone or iPad the new iTunes can't detect it?

    Well, you do not indicate what computer operating system you use, so here are the support documents for both. Choose the one that applies to you.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • After update new OS 10.10 can't detect camera

    after update new OS 10.10 can't detect camera

    Hi..
    Try the troubleshooting steps for the built in iSight camera here >  How to Troubleshoot iSight
    iWork software must be purchased from the App Store.

  • How can I make itunes detect new music added to Music folder

    How can I setup itunes to automatically detect new music added to my music folder? Under the advanced setting I currently have Itunes set to view my music folder where all my music is located. Im using Windows 7, Itunes Version 10.4.1.10. Currently I have to add new music manually and that's *****. I have over 2000 cd's that I need to rip. Please help. Thanks

    If you are ripping CDs, you can rip with iTunes and the tracks will be added to your iTunes library without manual intervention.
    But if you already have the files, or are using something other than iTunes to rip, you will note that iTunes does not automatically detect when new files have been placed in a folder.  You can add this capability by using a 3rd party program such as iTunes Folder Watch.

  • I would like to detect all the keyboard key is okay, but not every key can be detected by using LabVIEW example, keyboard keycode

    I would like to detect all the keyboard key is okay, but not every key can be detected by LabVIEW example ( we can use 『basic input demo.vi』to detect normal key』.
    I want to detect some 『hot key』 for example some keys exist in the upper part like 『search key』、『e-mail key』、『volumn control key』...etc. They are very often to be watched in some new keyboards, but we still don't know how to detect if their functions are okay.
    Can we detect signals of these 『hot key』 in LabVIEW? We can apply these hot key's functions in XP, so we should detect their signal, I think, but I can't do it.
    I serach some information about this question, and somebody said we can detect hot key's signal by grabing 『keybode』 these hot key feedback. But I don't know how to do these. I can't use VC. So anyone can give me a LabVIEW VI to grab keycode? Or any other solution we can detect all the key on the keyboard, including hot keys?
    Thanks!
    Regards,

    Maybe that is the limitation of Acquire Input Data.vi.The vi can't identify the Unformal key.
    You can try to use Event structure and set to listen "key down" event.
    There are two terminals VKey, ScanCode will sent out the information when you press key.
    There are two pictures in attached file, 2.jpg will show you the detail.
    Good luck.
    Attachments:
    SpecialKey.zip ‏17 KB

  • Skype can't detect any webcam

    Hi, Since I updated the newer version of skype 6.11, my video does not work anymore. When I go under options, I get the message, "skype can't detect any webcam". I have a built-in camera in my laptop using windows 7. I know my camera works, but I don't know how to make skype detect my built-in camera. So far, I can call people, I see and hear them and they can hear me, but they can't see me since I don't even have the options to put on my camera anymore. Please, can anyone help me with this issue? I have already uninstalled and reinstalled skype, but it does not work. Thank you

    Please,  run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • Can't detect a German PC wireless network I know is there

    Hi,
    I'm new to this forum and I hope someone can help me.
    I'm visiting friends in Berlin from Canada with my Powerbook G4 with OS10.4.11. I can't detect my host's wireless network even though I can detect 24 other wireless networks in her apartment building (I downloaded MacStumbler and used it to check). I know her network ("Jenny") is not hidden because she got a friend across the courtyard the same apartment building to check if she could see it on her computer this morning, which she could. I also tried to find "Jenny" by clicking on "Other" and then entering "Jenny" in "Network Name" and entering the WAP password my friend gave me (I also checked that with her so I know it is right) under both WPA Personal and WPA2 Personal. That didn't work either. I also followed advice on this forum and got rid of that stupid pop-up box saying "Your Network Settings have been changed by another application" when I clicked on System Preferences/Network
    What should I do? All my friend knows is that she has a PC, she doesn't know the brand or model of her router or her ISP provider. If I can't solve this, I will be in big trouble as I had planned to stay in Berlin for a few months using my friend's wireless network to get online every day. I can get online fine via her router when I have a cable plugged into my computer in her flat, but I am staying across the courtyard in their second flat and we can't string a cable across the courtyard... I've never had problems before connecting with any PC wireless network, in Europe or N. America.
    Very grateful for any help.

    It won't let me do that. When I go to the Network window of my System Preferences, it says Location: Automatic, and it won't let me click on New Location or on Edit Locations - they are pale grey.
    Also, it says Show Network Port Configurations and it gives me six: Internal Modem, Airport, Bluetooth, Built-in Ethernet, Built-in Firewire, VPN (L2TP) whatever that is, and Ethernet Adaptor (en2), and I don't know if that is the cable from my friend's router or the new stick adaptor I bought (it doesn't change, whichever I have plugged in), but all these are also pale grey and I can't click on them or on the boxes marked New Rename Delete or Duplicate.
    Also the stick adaptor I bought is not showing up in my Finder window as an attached device - shouldn't it? This means I can't eject it safely when I want to. There are no instructions enclosed with it or on the manufacturer's website.
    When I click on Network Status with the cable attached, it says I am currently connected to the Internet via built-in Ethernet with the IP address 192.168.0.112 so I guess built-in Ethernet must be the cable. So if the Ethernet Adaptor (en2) is the adaptor stick, maybe it isn't being recognized by my computer because it is on channel 13?

  • DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

    I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
    Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
    I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
    When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0005h (I/O Access, BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h Unknown
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 0000A800h
    System IRQ 5, INT# A
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
    Vendor 02h Creative Labs
    Device 0002h EMU0K Audio Chipset (SB Li've!)
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 04h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 002002h CT4850 SBLi've! Value
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00009000h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 7002h PCI Gameport Joystick
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 0h, Header Type 80h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Input, type Other
    Subsystem ID 002002h PCI Gameport Joystick
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008800h
    New Capabilities List Information :
    Power Management Capabilities
    Current Power State : D0 (Device fully-operational, no power saving)
    Vendor 02h Creative Labs
    Device 0008h Unknown
    Command 0004h (BusMaster)
    Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
    Revision 00h, Header Type 00h, Bus Latency 20h
    Self test 00h (Self test not supported)
    PCI Class Multimedia, type Audio
    Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
    Subsystem Vendor 02h Creative Labs
    Address 0 is an I/O Port : 00008400h
    New Capabilities List Information :
    Power Management Capabilities
    Supports power state D2
    Supports power state D
    Current Power State : D0 (Device fully-operational, no power saving)
    (Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
    So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
    I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
    I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
    Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
    Cheers,
    Russ.

    Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
    The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
    Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

  • APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

    just a summary...
    i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
    now, back to the topic..
    so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
    so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
    i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
    the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
    so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
    so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
    and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
    so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
    Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
    i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
    so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
    "4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
    If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
    so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
    after reinstallation of itunes my DVD drive can be seen and just  noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
    so going back to the topic..
    i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
    so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
    so now i opened iTunes and BOOOM!
    iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
    so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
    so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
    Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
    if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
    [for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
    and then you will see the screen below
    click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
    BUT the problem here is that your iPhone can't be detected on iTunes...
    now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
    click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
    SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
    i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
    PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
    Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

    Hi LSGZ,
    If you are having issues updating or restoring your iPhone, you may find the following article helpful:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Regards,
    - Brenden

  • Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

    Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

    Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

Maybe you are looking for