Solaris Certification & KIT - HELP

Hi,
I've completed my SCSA certification (SA1 & SA2) on 5th May 2010.
I've not received any Email from SUN regarding this.
I want to know to get my certificate & kit will I've to do or Publish something?
I've also send 2 Emails to SUN but not received any response :(
Please help me...
Thanks,
Yvv47

You are right michael.
But my issue is that why dont they reply to my Email?
And as I've done this first time I dont know any procedure to get my certificate.
I want to know Is there any steps or procedure to do so that i can get my kit or after my exam it'll be automatically delivered to me after 45 days?
pls tell me what to do?
Thanks...
Yvv47
Edited by: yvv47 on May 22, 2010 3:34 AM

Similar Messages

Windows App Certification Kit - Test Fails for Validate Desktop App at "Write appropriate Add/Remove Program values"

Hi,
I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal.
I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option.
To build the package I am using InstallShield 2012 SPR Limited Edition (for Visual Studio), and the validation fails
only with the following error (please also see the attached image):
Clean reversible install test: Failed to Write appropriate Add/Remove Program values
Error Found: The registry population test detected the following error: app didn't create the required registry entries.
A non-optional value 'DisplayName' is missing or invalid (same for 'Publisher', 'ProductVersion')
Please note that I have filled in all the publisher/product details in the InstallShield project, on the General Information page.
Also I have tried to use the Microsoft Visual Studio Installer Project for VS2013, and the validation failed with the exact same error.
(https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d)
Any help would be very appreciated.
Thank you.

You may need to add the necessary info to the app’s Windows Installer package so it can configure Add/Remove Programs in Control Panel correctly. Setting these properties automatically writes the corresponding values into the registry. From the picture,
you are missing some necessary information about your desktop app.
Also You need the correct admin permissions to write to the registry.
Please refer to this thread:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[WPSL]Windows App Certification Kit Test Fails, binary is built in debug mode

Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.

Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit.
Hi ranjit,
>>Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1
Okay, this may be due to the upgrading process, could you tell us what the detailed version of your Visual Studio is(for example: Visual Studio 2013 Update 4)?
You may need to create a new Windows Phone 8.1 Silverlight project and try to upload it to Store, if this problem can be resolved, I think this should be related to the upgrading process, you may need to start from scratch by recreating a WP8.1 SL project.
To exclude environment facts, I would also suggest you retesting it on a new machine with the latest IDE.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows App Certification Kit Test Fails, binary is built in debug mode

Hi,
Windows phone 8.1 App fails Windows App Certification Kit test (WACK Test).
It is producing below error in Debug configuration test,
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
Impact if not fixed: Windows Phone Store doesn’t allow a debug version of an app.
How to fix: Please make sure the app isn't linking to any debug versions of a framework and it is built with the release configuration
And i got a solution like,
Universal Apps (And Silverlight 8.1 Apps) have a different certification requirement. You cannot publish assemblies built in debug mode.
You'll need to contact the NuGet authors of ICSharpCode and ImageTools and have them provide you with a version built in release mode.
How to proceed with this solution. I'm very help full if any solution provided.
Thanks and Regards,
Ranjit.

Hi Franklin,
Thanks for your replay. I created my package in 'Release' mode only.
Actually my project in windows phone 7.1 and i upgraded it to windows phone 8.1. In "Release" mode i created my build, but i'm having this error in WACK(Windows
App Certification Kit) test.
I'm able to run my App in windows phone 8.1, but if i submit it to store then will be rejected definitely.
The debug configuration test detected the following errors:
1)The binary Phone.Controls.dll is built in debug mode.
The WACK test fails in debug configuration test, for "Phone.Controls.dll "
it is built in debug mode.
There should be a solution like, how to convert .dll to release mode.
Please help me in this.
Thanks
Ranjit.

Application certification kit automation

Dear sir\madam,
I am trying to automate windows application certification kit validation for desktop application by using the command line which is mentioned in the ACK whitepaper. Below is the commandline option I am using.
appcert test -apptype desktop -setuppath d:\cdrom\setup.exe -reportoutputpath c:\Output\MyReport.xml
I am using silent installation\uninstallation to install\uninstall my product. However, my product requires a reboot to remove all the residual files . Please help me to generate the report after reboot? is there any commandline
option which I can use to do that? Because, before reboot, the generated report will show certain deviations on the residual files(Certain temp files aren't deleted).
Awaiting your reply.
Regards,
Chirag.

Here is the document of how to use certification kit.
Using the Windows App Certification Kit
Windows App Certification Kit tests
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Application Certification Kit

Dear sir\madam,
I am trying to automate windows application certification kit validation for desktop application by using the command line which is mentioned in the ACK whitepaper. Below is the commandline option I am using.
appcert test -apptype desktop -setuppath d:\cdrom\setup.exe -reportoutputpath c:\Output\MyReport.xml
I am using silent installation\uninstallation to install\uninstall my product. However, my product requires a reboot to remove all the residual files . Please help me to generate the report after reboot? is there any commandline
option which I can use to do that? Because, before reboot, the generated report will show certain deviations on the residual files(Certain temp files aren't deleted).
Awaiting your reply.
Regards,
Chirag.

Here is the document of how to use certification kit.
Using the Windows App Certification Kit
Windows App Certification Kit tests
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OCA and OCP Certification kit not yet received

Hi,
I had cleared my OCA in Dec,2012 and when followed up with Oracle Support then they told that my success kit was shipped on 21-Dec-2012 and I would receive it by the first week of Feb,2013,which never happened.I have raised so many SR's in this regard and each time they replied that I had to change my address on PearsonVue to get 2nd shipment done as the new address has to be different from the first.
In Feb,2013 I cleared my OCP and the shipment in Certview for it shows first shipment as 10-FEB-13.
I have received neither of my certification kits till date and I am very much frustrated by this service of Oracle as it should at least provide a tracking no so that people can track their kit from time to time.Each time I follow up with the support they give excuse to change the address and all and till now they haven't initiated a 2nd shipment for any of my certificates.I have taken other certifications too like ITIL and got the certificate within 15days their service was hassle free.But Oracle is worst than what people used to say in terms of shipment of certification.I don't have any hope now as almost 1 year is going to pass and I haven't received my 1st certificate also.
Here I have mentioned all the SR's raised by me along with their respective dates,in this regard.If you have time from your busy schedule then please have a look at them.I would appreciate your consideration.
Service Request Number: 497386-231952116 -- 19.12.12
Service Request Number: 497386-233962375 -- 25.12.12
Service Request Number: 497386-253830926 -- 29.01.13
Service Request Number: 497386-260975366 -- 10.02.13
Service Request Number: 497386-261383622 -- 11.02.13
Service Request Number: 497386-331854185 -- 03.06.13
Rgds,
Vinni Sharma.

Vini,
I will pass this request along to the team lead for support. Unfortunately, there are some regions in which we have an immense amount of difficulty getting the certificates delivered. This is more extreme than most cases I see. I am not sure what the issue is, but I will try to help you get it sorted out. I'm sure this has been frustrating for you.
Regards,
Brandye Barrington
Certification Forum Moderator

Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

HT1981 I will use my 110V MacBook in the Philippines which has 220V sockets. Will the World Travel Adapter Kit help me?

I will use my 110V MacBook in the Philippines which has 220V sockets. Will the World Travel Adapter Kit help me?

Assuming you're in North America now, you probably won't need any sort of plug adaptor there; most sockets in the Philippines are the same as those in North America. In case you do, it doesn't contain the correct adaptor.
Voltage conversion is handled by the MacBook without any additional components.
(66079)

Inconsistent results with Windows App Certification Kit

Hi, I asked about this issue before on a different forum but didn't get a response. Support pointed me towards this forum so I'm asking here as maybe the other forum wasn't the appropriate one. My company is attempting to renew our ms partnership, and we are
trying to certify our desktop
app for windows 8. I have attached a screen shot below showing the registry entries that our app makes. When we try to test for certification (windows 8) we get the different (but similar) results on different systems using the exact same installation package.
Here is an example of the results we get:
Results:
An optional value 'VersionMajor' is missing or invalid      for program Chiro8000.
An optional value 'VersionMinor' is missing or invalid      for program Chiro8000.
An optional value 'MajorVersion' is missing or invalid      for program Chiro8000.
An optional value 'MinorVersion' is missing or invalid      for program Chiro8000.
A non-optional value 'DisplayName' is missing or      invalid for program Chiro8000.
A non-optional value 'Publisher' is missing or invalid      for program Chiro8000.
A non-optional value 'ProductVersion' is missing or      invalid for program Chiro8000.
An optional value 'InstallLocation' is missing or      invalid for program Chiro8000.
Can anyone point us in the right direction?

How did you publish this package? Here are some similar questions, maybe caused by installer:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
http://www.advancedinstaller.com/forums/viewtopic.php?f=2&t=21368
http://www.advancedinstaller.com/forums/viewtopic.php?f=2&t=29782
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e61c393d-e5af-4fee-ad8b-29c36e889043/windows-app-certification-kit-tests-fail-for-desktop-app-installed-from-msi?forum=windowscompatibility
Best Regards,
Please remember to mark the replies as answers if they help

Oracle 11g OCP certification kit

I have completed Oracle 11g OCP. As I understand a hands-on training course is manadatory to get the certification kit.
Can I do a Self-Study CD course or do I have to do Instructor led course?
Thanks.

information about that cert is here:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=198
note the link which says "Complete one of the approved instructor-led online or in-class courses."

Study partner for solaris certification

Hello,
Where can I find study partners for a Solaris certification ?
Is there a community website for this cause ?
Thanks.

I think you should contact your local sun training representative.
For example Sun have office in Poland which offers trainings and certifications.
Kind regards,
Daniel

Regarding oracle solaris certification

send me detail information regarding oracle solaris certification.Whenever i am trying to look about this it is giving error like this country is not in list for solaris certification

There are several Oracle Solaris certifications, so it is difficult to know which certification you wish to pursue. The certification pages should be available in all countries (tho bigdellboy is correct, the certification may not actually be available in all countries due to US trade embargoes). If the pages are not displaying in your country, this is an issue with the website. Please provide the country from which you are trying to access the pages. If you are uncomfortable posting that information on this forum, please send an email to [email protected] and we will take a look at the web pages in that country to ensure that the settings are correct.
We apologize for the inconvenience and thank you for bringing this to our attention.
Regards,
Brandye Barrington
Certification Forum Moderator

Excel MSGraph Axis Value w/ Report Gentration Tool kit help needed

Hello,
I am working on making all my Printed Data sheets dynamic so I don't need to have an Excel Template for each test I create. I have been able to make my own modifications to some of the Report Generation tool kit VIs to add little things I need or want changed, but I am stuck.
I currently have LabVIEW writing Charts in Excel, using the Insert Graph VIs from the tool kit but I want to be able to make the X Axis Values invisible but leave the Y values for this particular data sheet. I have looked through all my documentation but cannot find anything referring to setting that.
What is the correct ActiveX Method and/or Property that I need to incorporate to do this? I found that in Excel if I click on the Chart it is in the Chart Options Menu but I cannot find a way to control it through LabVIEW.
I am currently using 7.1.1 with Office 98 and the Report Generation Toolkit 1.1.0
Any ideas?
Thanks
Jeff
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect

Hello,
LabVIEW should have access to everything that the excel ActiveX object publishes. One way to discover how to do it would be to record a macro in excel, where your recorded actions are on the x-axis as you desire. This way you will have a macro which you can run that will do this for you. Perhpas more importantly, you will then be able to look at the code for that macro you recorded, and make the equivalent calls in LabVIEW, which should basically expose which ActiveX calls on that object achieve the axis modification. In any event, to help you with this process, below are some useful links. Also, you will find other threads on this matter if you search the discussion forums.
Excel and LabVIEW Integration Tutorial:
http://zone.ni.com/devzone/conceptd.nsf/webmain/4d86c9752c658da78625689300730c10
Here are links to examples of using macros in Excel from LabVIEW:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DD2F56A4E034080020E74861&p_...
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3D9D856A4E034080020E74861&p_...
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

SD certification questions - Help with answers

Dear All,
I am writing my certification exam tomorrow. Please help me in finding the answers for the below questions.
1. Can i have multiple condition records for a condition table?
2. Can two condition types share a condition table?
3. What happens to the value of the condition type which is marked for both the header and the item simultaneosly?
4. Can an access have multiple condition tables?
5. Can i specify 2 source fields for a field within a condition table?
6. Can i change the activation type during the creation of a condition record to a different one thats set up in the condition type?
7. Where are the tax codes defined? and for which entity/level?
8. How are tax codes assigned to a country?
9. Can i create sales deals without reference to a promotion?
10. Can you do picking in the order? if so how?
11. What are the possible transportation.plan.stats?
12. Can the shipment be created automatically?
13. What happens to the material listing/exclusion if payer is different from sold to party?
14. Can we do free goods dtermination in deliveries?
15. When one picks a delivery, does it update the order item status?
16. Are transportation planning points connected to loading points?
17. How transportation planning point and shipping point connected?
18. What are the packets in which SAP transmitts information, called?
19. Are there any blocks possible at the schedule line level?
20. Can we enter a sub-item in the higher level item field in the delivery?
21. Does item category determination in delivery take into account higher level item category also?
22. Can one condition type have multiple access sequence?
Regards
Prasanth

1. Can i have multiple condition records for a condition table?
Yes. This is possible as we can maintain future change in price in advance.
2. Can two condition types share a condition table?
Yes.
3. What happens to the value of the condition type which is marked for both the header and the item simultaneosly?
Item level has precedence.
4. Can an access have multiple condition tables?
Yes.
7. Where are the tax codes defined? and for which entity/level?
Tax Code are defined in Transaction Code: FTXP
8. How are tax codes assigned to a country?
It is done in Excise Setting.
10. Can you do picking in the order? if so how?.
No. It is done in Delivery.
12. Can the shipment be created automatically?
No.
13. What happens to the material listing/exclusion if payer is different from sold to party?
It will be based on Sold to Party.
15. When one picks a delivery, does it update the order item status?
Yes.
19. Are there any blocks possible at the schedule line level?
Yes. Delivery Block
22. Can one condition type have multiple access sequence?
No. It can have only one Access Sequence. Header and Manual Condition Type do not have Access Sequence.
Regards,
Rajesh Banka

Solaris Certification & KIT - HELP

Similar Messages

Maybe you are looking for