Solaris Cluster 3.2 with Oracle 11i R2 oracle agent installation question

Hi all!
I'm new in clustering and trying to build a two-node cluster in my lab. At the moment i've successfully installed cluster software and oracle on the nodes and now i'm trying to integrate cluster with oracle DB. Unfortunately, i couldn't find the documentation about this task. Can anyone give me an URL, where to look? By the way: i tried to find something here: http://docs.sun.com/app/docs/doc/820-7360/fxjbo?a=view but found info only about Oracle RAC and nothing else, but i'm trying to build cluster without RAC - just only with solaris cluster.

Hi,
You might run into trouble with 11gR2 right now. You need to wait until the nxt patch for th eHA Oracle agent is avialble, or use 11gR1 at the moment.
Sorry for the bad news.
Detlef

Similar Messages

Is any difference in oracle 11i and oracle 12 interfaces tables

Dear All,
Can someone tells me .. Is any difference in oracle 11i and oracle R12 interface tables?? My company want to upgrade Oracle 11i to EBS R12
PS
Edited by: PS on Jul 13, 2012 3:07 PM

Please also see:
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS File Comparison Report Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_file_comparison_report_now
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
Thanks,
Hussein

Solaris cluster 3.2 with zfs failover filesystem failed. How can I recover?

Hi all,
I have just install and configure Solaris cluster 3.2U3 using zfs for both of root filesystem and shared storage file system.
This cluster operate clearly. Today, I can not see the zpool for shared storage. I can see the storage volume in the output of format command.
So all my resources change to offline status. and my application is failed.
How can I recover this cluster??????
is there any body can help me :(

Have you used a SUNW.HAStoragePlus (HASP) resource to control your zpool? If not, the zpool is probably needs importing. That is what the HASP resource would do for you. You would also need a dependency from your application on the HASP resource to ensure that your application does not try to start up before the storage is avaialable.
Regards,
Tim
---

Oracle 11i E-Business Suite Installation on Windows fails

All you Oracle 11i gurus out there, please HELP as I am at my wit's end.
I am trying to install Oracle 11i E-Business Suite (downloaded from the edelivery Website) on Windows 2003 Server with dual PIII CPU, 1GB RAM, and 150GB+ disk space.
My Oracle 11i install on Windows has been failing during Step 1 of 5 following the process of unpacking the 114 zipfiles for the 9.2.0 database even though all the diagnostic steps passed.
It appears the install is failing on the following step:
InstantiateFile -d d:\oracle\visdb\9.2.0\appsutil\driver\instconf.drv
I have MKS Toolkit installed on C:\MKS and VC++ installed on C:\MVS\VC98.
I have renamed make.exe to gnumake.exe in the C:\MKS\mksnt folder and copied the linker (link.exe) from C:\MVS\VC98\bin to the C:\Windows\System32 folder.
The InstantiateFile step is executing some Java classes. I have also installed the JRE on C:\jre1.5.0_06, although it's doubtful this will impact the install scripts since the scripts are all hardcoded with the included JRE 1.4.2.
Why do Oracle DBAs and users deal with this crap? A software install should not be this difficult.
Thanks in advance.

Thanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users.

Oracle 10gR2 Grid Management Agents installation issues

I have downloaded the Grid Management Agent from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of host server i am attempting to install the agent on is AIX5.3
I unzipped the following file
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the installer and it all seemed to work ok
I have checked the dbconsole is running,EMCTL STATUS DBCONSOLE
I have checked the agent is running EMCTL STATUS AGENT
I have checked the listener is running LSNRCTL STATUS
I have checked the database is up by CONNECT / AS SYSDBA
I can conect to the http://myserver:1158/em
The local enterprise manager works fine however as i say the server does not appear in my Grid Control console.
I have restarted al the afforementioned listeners, agents etc.
Can anyone give me a pointer as to why after what would appear to be a succesfull install the serevr does not appear in Grid Control console.

yingkuan again thanks for the reply
I have read the installation readme and it says i have these installation methods
1 - Methods for mass deployment
2 - Using Oracle Universal Installer (OUI) to install agent
3 - silent installation
4 - NFS Mounted agent installation
I am running the runInstaller method (2) from the list above
Like i say i basically downloaded the following file from Oracle Downloads:
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I FTP'd the file from my PC to the server i wish to be the agent.
I then ran the runInstaller from AIX_Grid_Control_agent_download_10_2_0_3_0/aix/agent/install.
However at no point was i asked to insert the OMS server or any other details.
I have read a couple of different readme files and followed what i believe to be the installation instructions. Could you or anyone else possibly throw any light on what i am doing wrong.
again any assitance greatly appreciated

Oracle Audit Vault Server & Agent Installation Error.

Hi,
I am new to Audit vault. When I install Audit Vault on Windows 2008 R2 it throws an error after installing 99%. Kindly help me to resolve.
OS Version : Windows 2008 R2
Oracle Audit Vault Version: 10.2.3.2
Error:
Audit Vault Server:
INFO: Configuration assistant "Oracle Audit Vault Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.3\av_1
Configuration directory is set to C:\oracle\product\10.2.3\av_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Created a new file C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
xception: VariableNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQu
Also while installing Collection agent, it throws the error while executing runInstaller.
OS Version : AIX 6.1
Oracle Audit Vault Agent Version: 10.2.3.2
Audit Agent:
bash-3.2$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5200 or 5300
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2011-05-12_05-11-03PM/installActions2011-05-12_05-11-03PM.log
*/tmp/OraInstall2011-05-12_05-15-39PM>*cat installActions2011-05-12_05-15-39PM.log
Using paramFile: /finacle/avagent/aix_5l64/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5200 or 5300
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2011-05-12_05-15-39PM/installActions2011-05-12_05-15-39PM.log
Thanks & Regards,
Mithra.
Edited by: 864048 on Jun 7, 2011 2:57 AM

Hi ,
Please try the following:
Execute the setup in cmd with -ignoreSysPrereqs option.
Thank you.

Oracle 11i, Oracle 8i, Oracle 9i, and Oracle 10g

Is Oracle 11i based on Oracle 9i or 8i backend engine? Would it be possible to upgrade Oracle 11i with Oracle 10g backend engine? When is the next release of Oracle 11i that is based on Oracle 10g?

Hi,
Oracle 11i is Oracle Applications 11i only which is holding applications modules hope you got it.
Oracle 9i enterprise database has new features got utilized in Apps 11i.
The Oracle 10g production will be launched in the month of december 2003 only.
Thanks and Regards
A.Riyas
email : [email protected]
Kuwait

Solaris Cluster 3.3 on VMware ESX 4.1

Hi there,
I am trying to setup Solaris Cluster 3.3 on Vmware ESX 4.1
My first question is: Is there anyone out there setted up Solaris Cluster on vmware accross boxes?
My tools:
Solaris 10 U9 x64
Solaris Cluster 3.3
Vmware ESX 4.1
HP DL 380 G7
HP P2000 Fibre Channel Storage
When I try to setup cluster, just next next next, it completes successfully. It reboots the second node first and then the itself.
After second node comes up on login screen, ping stops after 5 sec. Same either nodes!
I am trying to understand why it does that? I did every possibility to complete this job. Setted up quorum as RDM from VMware. Solaris has direct access to quorum disk now.
I am new to Solaris and I am having the errors below. If someone would like to help me it will be much appreciated!
Please explain me in more details i am new bee in solaris :) Thanks!
I need help especially on error: /proc fails to mount periodically during reboots.
Here is the error messages. Is there any one out there setted up Solaris Cluster on ESX 4.1 ?
* cluster check (ver 1.0)
Report Date: 2011.02.28 at 16.04.46 EET
2011.02.28 at 14.04.46 GMT
Command run on host:
39bc6e2d- sun1
Checks run on nodes:
sun1
Unique Checks: 5
===========================================================================
* Summary of Single Node Check Results for sun1
===========================================================================
Checks Considered: 5
Results by Status
Violated : 0
Insufficient Data : 0
Execution Error : 0
Unknown Status : 0
Information Only : 0
Not Applicable : 2
Passed : 3
Violations by Severity
Critical : 0
High : 0
Moderate : 0
Low : 0
* Details for 2 Not Applicable Checks on sun1
* Check ID: S6708606 ***
* Severity: Moderate
* Problem Statement: Multiple network interfaces on a single subnet have the same MAC address.
* Applicability: Scan output of '/usr/sbin/ifconfig -a' for more than one interface with an 'ether' line. Check does not apply if zero or only one ether line.
* Check ID: S6708496 ***
* Severity: Moderate
* Problem Statement: Cluster node (3.1 or later) OpenBoot Prom (OBP) has local-mac-address? variable set to 'false'.
* Applicability: Applicable to SPARC architecture only.
* Details for 3 Passed Checks on sun1
* Check ID: S6708605 ***
* Severity: Critical
* Problem Statement: The /dev/rmt directory is missing.
* Check ID: S6708638 ***
* Severity: Moderate
* Problem Statement: Node has insufficient physical memory.
* Check ID: S6708642 ***
* Severity: Critical
* Problem Statement: /proc fails to mount periodically during reboots.
===========================================================================
* End of Report 2011.02.28 at 16.04.46 EET
===========================================================================
Edited by: user13603929 on 28-Feb-2011 22:22
Edited by: user13603929 on 28-Feb-2011 22:24
Note: Please ignore memory error I have installed 5GB memory and it says it requires min 1 GB! i think it is a bug!
Edited by: user13603929 on 28-Feb-2011 22:25

@TimRead
Hi, thanks for reply,
I have already followed the steps also on your links but no joy on this.
What i noticed here is cluster seems to be buggy. Because i have tried to install cluster 3.3 on physical hardware and it gave me excat same error messages! interesting isnt it?
Please see errors below that I got from on top of VMware and also on Solaris Physical hardware installation:
ERROR1:
Comment: I have installed different memories all the time. It keeps sayying that silly error.
problem_statement : *Node has insufficient physical memory.
<analysis>5120 MB of memory is installed on this node.The current release of Solaris Cluster requires a minimum of 1024 MB of physical memory in each node. Additional memory required for various Data Services.</analysis>
<recommendations>Add enough memory to this node to bring its physical memory up to the minimum required level.
ERROR2
Comment: Despite rmt directory is there I gor error below on cluster check
<problem_statement>The /dev/rmt directory is missing.
<analysis>The /dev/rmt directory is missing on this Solaris Cluster node. The current implementation of scdidadm(1M) relies on the existence of /dev/rmt to successfully execute 'scdidadm -r'. The /dev/rmt directory is created by Solaris regardless of the existence of the actual nderlying devices. The expectation is that the user will never delete this directory. During a reconfiguration reboot to add new disk devices, if /dev/rmt is missing scdidadm will not create the new devices and will exit with the following error: 'ERR in discover_paths : Cannot walk /dev/rmt' The absence of /dev/rmt might prevent a failover to this node and result in a cluster outage. See BugIDs 4368956 and 4783135 for more details.</analysis>
ERROR3
Comment: All Nics have different MAC address though, also I have done what it suggests me. No joy here as well!
<problem_statement>Cluster node (3.1 or later) OpenBoot Prom (OBP) has local-mac-address? variable set to 'false'.
<analysis>The local-mac-address? variable must be set to 'true.' Proper operation of the public networks depends on each interface having a different MAC address.</analysis>
<recommendations>Change the local-mac-address? variable to true: 1) From the OBP (ok> prompt): ok> setenv local-mac-address? true ok> reset 2) Or as root: # /usr/sbin/eeprom local-mac-address?=true # init 0 ok> reset</recommendations>
ERROR4
Comment: No comment on this, i have done what it says no joy...
<problem_statement>/proc fails to mount periodically during reboots.
<analysis>Something is trying to access /proc before it is normally mounted during the boot process. This can cause /proc not to mount. If /proc isn't mounted, some Solaris Cluster daemons might fail on startup, which can cause the node to panic. The following lines were found:</analysis>
Thanks!

Oracle ASM Configuration on Solaris Cluster - Oracle 11.2.0.3

Hi,
I want some clarifications!
I need to set Active and Passive Cluster settup on Solaris 10 SPARC Operating System, the HA software is Solaris Cluster and Oracle 11.2.0.3.
1) I understand "Single instance Oracle ASM is not supported with Oracle 11g release 2" so we need to go for Clustered ASM - is it required to use RAC framework in this case?
2) When i use the RAC framework, do i need to have license for RAC?
Am new to Oracle, any help is appreciated.
Regards,
Shashank

Hi,
I want some clarifications!
I need to set Active and Passive Cluster settup on Solaris 10 SPARC Operating System, the HA software is Solaris Cluster and Oracle 11.2.0.3.
1) I understand "Single instance Oracle ASM is not supported with Oracle 11g release 2" so we need to go for Clustered ASM - is it required to use RAC framework in this case?
2) When i use the RAC framework, do i need to have license for RAC?
Am new to Oracle, any help is appreciated.
Regards,
Shashank

Re: Oracle Solaris Cluster 3.3 using Oracle Solaris 09/10 on virtualbox

Dear All,
I am trying to build a solaris cluster 3.3 on virtualbox using Oracle Solaris 09/10. My host OS is Ubuntu 10.10. But, when i try to add the second node, it is not able to find the node1 says "unable to connect to node1". Can anyone help me build this cluster.
my laptop is hp probook 4420s and has i3 processor and 2gb ram, wherein i have assigned 750mb ram to both Oracle Solaris 09/10 OS. Moreover, the first node is successfully attached. Both the virtual machines can ssh succesfully and link based ipmp is setup on both the virtual machines. Please help me regarding this as i am new to clustering.

As Nik said, this could be a problem with the setup of the private interconnects. This could also be caused by the fact that the necessary ports on the nodes are closed - due to secure by default.
There is an old blog entry on blogs.sun.com by Thorsten Frueauf that explains how to open the ports and/or start the necessary services. I think it is also documented now as part of the normal installation manuals.

JDeveloper 9i for Oracle 11i 10 with RUP4

Hi,
I am trying to download JDeveloper patch 9i with OAF extension for Oracle Apps 11i 10 framework with RUP4. I am having issues with finding the right patch number as metalink says different patches in different pages. With the one I downloaded, I am having some database connection problem which gives me "IO Exception: The Network Adapter Could not Establish Connection".
Can some help? Pls?
Thanks.

5455514 is the patch for rup 4 based system.
As for the error, it is very generic. Either try to follow the steps for hello world carefully or search on forum, you will find many similar threads on this topic.
--Shiv

Oracle ASM installation in Solaris Cluster

hello Experts,
Could someone please tell me how to install Oracle ASM in Solaris Cluster and how to integrate it into the cluster resources.
Details,
2 Nodes (Pri & Sec) solaris 10 SPARC 64 bit OS
solaris cluster 3.3 u5/11
Thanks & Regards

hi,
pls take a look at tihs doc
http://docs.oracle.com/cd/E18728_01/html/821-2678/gjcwv.html
regards,

Do someone knows how to create a cluster with two nodes on oracle VM Ware

dear members,
can someone guide us through creating a cluster with two nodes on oracle VM. it will be nice if we can virtualiza RAC, atleast for education purposes.
Thank you all in advance

Here is an excellent article that explains how to do this:
http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/

Is iPhone "Oracle Buisness Approvals for Managers'' compatible with EBS-11i

Is it possible to Install "Oracle Buisness Approvals for Managers'' (BPEL connector for iPhone with EBS) on EBS-11i? the following PDF askes EBS-R12
http://www.oracle.com/applications/oracle-business-approvals-for-managers-faq.pdf
Our EBS version is 11.5.10.2
Thanks.

Thank you Helios. We are also exploring PO/PR approvals through Blackberry utilizing EBS-11i Notification Alerts. I have three questions
1. Whats difference between oracle Notification/Email Alerts AND Oracle Workflow Notification Alerts.
2. Is EBS-11i sufficient to exploit its email sender to receive aswell and work with NID embedded in email
3. Why do we need Application Server Wireless component!?! if we can receive normal emails with NID tag embedded through non wireless App server 10g setup. Our blackberries since receiving normal email fine can/may also receive NID tagged emails in same traditional manner.
Please guide.
Thank you
Edited by: user473160 on Nov 11, 2009 1:29 PM

Oracle RAC on solaris Cluster - advantages

Hi,
I wonder what are the advantages of installing Oracle Rac on solaris Cluster.
Oracle Rac is a cluster solution by itself and puting it to solaris Cluster will complicate a whole system a lot.
One advantage I know iis that solaris cluster will secure a voting disks but those could be also secure by using NFS.
Please give me your opinion if its worth in general to iinstall RAC 11g in solaris cluster 3.2.
How do you think, will Oracle extend the solaris cluster solution for databases in the future ?
Many thanks in advance.

CRS is built to manage RAC. Using any other cluster software for RAC will complicate the solution without adding benefit.
But if you are building a cluster to run application servers etc, then it would be better to use a more flexible cluster solution. (e.g NOT crs)

Solaris Cluster 3.2 with Oracle 11i R2 oracle agent installation question

Similar Messages

Maybe you are looking for