Solaris does not see second cpu

I have put together the following system:
Asus A7M266-D mobo
2 - Athlon MP 1.6+ cpus
2 - 512 MB DDR PC2100
Maxtor 60 gb hd
Matrox G450 agp video
mpstat shows only cpu 0. Any thoughts on how to get both cpus running?
Allen

Allen,
What does the following command indicate:
psrinfo -v.
Do a man page on mpstat and I think you'll find out that this display shows cpu sets! In a multiple cpu machine, CPU's can be grouped into "sets". Unless there is a defination to group otherwise, a dual processor machine will indicate only one "set".
John

Similar Messages

Since Yosemite my Macbook 11inch mid 2011 does not see second thunderbolt display anymore. My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot

Since Yosemite my Macbook 11inch mid 2011 (supports Thunderbolt) does not see the second thunderbolt display anymore.
My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot.
Does anyone else experience these problems and/or have solutions

Hello ROBLAHAY,
I'm sorry to hear you are having this issue with your MacBook Air. I also apologize, I'm a bit unclear on the exact configuration you are describing. If you are talking about using two external Thunderbolt displays (in addition to the internal display) with your Mid 2011 MacBook Air 11-inch, you may want to be aware that only a single external Thunderbolt display is supported on that model, as noted in the following article:
3. How many Apple Thunderbolt Displays can I use with my Mac in OS X?
The table below indicates how many Thunderbolt displays can be connected to Thunderbolt-capable Mac computers in OS X.
Computer
Maximum connected displays
Thunderbolt-capable Macs with Intel HD Graphics 3000 integrated graphics can support one connected Apple Thunderbolt Display (27-inch).
MacBook Air (Mid 2011)
MacBook Pro (13-inch, Early 2011) and (13-inch, Late 2011)1
Mac mini (Mid 2011), 2.3 GHz
Mac mini with Lion Server (Mid 2011)
One Thunderbolt display
Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
If you are using just a single external display and still having issues, you may find the troubleshooting steps outlined in the this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Sincerely,
- Brenden

Solaris 9 not seeing second path for few LUNs.

Hi,
We got 59 LUNs from EMC storage team. We are able to see all 59 LUNs in path. We are seeing 53 LUNs on second path, for 6 LUNs system is not seeing second path.
With syminq output we are able to see the device on both paths. Both HBAs has same number of entries in /etc/path_to_inst file. We rebooted and ran update_drv command few times still system is not seeing second second path.
Any idea why we are not seeing second path?
Here is sd.conf entry. lun 27 is good, lun 86 missing second path
name="sd" parent="lpfc" target=17 lun=27;
name="sd" parent="lpfc" target=17 lun=86;
name="sd" parent="lpfc" target=18 lun=27;
name="sd" parent="lpfc" target=18 lun=86;Thanks
SR

Hi,
We got 59 LUNs from EMC storage team. We are able to see all 59 LUNs in path. We are seeing 53 LUNs on second path, for 6 LUNs system is not seeing second path.
With syminq output we are able to see the device on both paths. Both HBAs has same number of entries in /etc/path_to_inst file. We rebooted and ran update_drv command few times still system is not seeing second second path.
Any idea why we are not seeing second path?
Here is sd.conf entry. lun 27 is good, lun 86 missing second path
name="sd" parent="lpfc" target=17 lun=27;
name="sd" parent="lpfc" target=17 lun=86;
name="sd" parent="lpfc" target=18 lun=27;
name="sd" parent="lpfc" target=18 lun=86;Thanks
SR

Solaris 8 does not recognise second CPU

Hi,
my Solaris 8 installation on my E250 does not recognise my second CPU. prtdiag and psrinfo only show one CPU. OBP reports the second has no problem and is online (ASR). It even has the same temperature as the other operating one...
Can someone help me?
Thanks in advance to all,
Horst

# eeprom
check the .upa-noprobe-mask variable. It has to be 0 to see all cpu's
depending on OBP revision, it may be called upa-noprobe-list
# eeprom .upa-noprobe-mask=0
# init 6 (to reboot)

Solaris 10 [11/06]: Second CPU not accessible using psradm / psrinfo / ...

Hi all,
Some months ago I've build up a small Server for some home projects with Solaris 10 x86 11/06. All things are running fine but Solaris does not use the second CPU that is installed.
I have a FSC D1306 server board from an old Primergy P200 server.
First, I saw that my system only uses one CPU:
# psrinfo
0       on-line   since 10/04/2007 20:13:27I then checked, if the system recognizes the second processor socket at all:
# prtdiag
System Configuration: FUJITSU SIEMENS D1306
BIOS Configuration: FUJITSU SIEMENS // Phoenix Technologies Ltd. 4.06 Rev. 1.05.1306             12/12/2003
==== Processor Sockets ====================================
Version                          Location Tag
Pentium(R) III                   CPU 0
Pentium(R) III                   CPU 1
[ . . . ]After that I wanted to see, if the second processor has been detected properly by the BIOS:
# smbios -t SMB_TYPE_PROCESSOR
ID    SIZE TYPE
4     61   SMB_TYPE_PROCESSOR (processor)
Manufacturer: Intel
Version: Pentium(R) III
Location Tag: CPU 0
Family: 17 (Pentium III)
CPUID: 0x383fbff000006b1
Type: 3 (central processor)
Socket Upgrade: 4 (ZIF socket)
Socket Status: Populated
Processor Status: 1 (enabled)
Supported Voltages: 1.7V
External Clock Speed: Unknown
Maximum Speed: 1400MHz
Current Speed: 1400MHz
L1 Cache: 6
L2 Cache: 7
L3 Cache: None
ID    SIZE TYPE
5     61   SMB_TYPE_PROCESSOR (processor)
Manufacturer: Intel
Version: Pentium(R) III
Location Tag: CPU 1
Family: 17 (Pentium III)
CPUID: 0x383fbff000006b4
Type: 3 (central processor)
Socket Upgrade: 4 (ZIF socket)
Socket Status: Populated
Processor Status: 1 (enabled)
Supported Voltages: 1.7V
External Clock Speed: Unknown
Maximum Speed: 1400MHz
Current Speed: 1400MHz
L1 Cache: 8
L2 Cache: 9
L3 Cache: None^^ Well, I guess it was detected properly. But after running prtconf and prtpicl I saw that there was only one processor available to Solaris.
Can anyone help me enabling the second CPU? I would like to use it because I have some applications that would run much better on two CPU's rather than one.
Thanks for all tips,
C]-[aoZ
Edited by: CHaoSlayeR on Oct 28, 2007 7:04 AM

If memory serves, to get multi-cpu working, you must enable acpi in the bios. Given that this is a pIII, it is in the era where api was either really buggy or was off by default (so you should also check to make sure the bios was the latest...)
-r

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

I am trying to install a second airport express to extend my network. When I use the aiport utility it does not see the second airport express.

Suggest that you perform a Factory Default Reset as follows:
Pull the Express from power
Wait a few moments
Hold in the reset button and keep holding it an additonal 8-10 seconds while you plug the Express back in to power
Release the reset button and allow 40-45 seconds for the Express to restart
Apple's instructions to do what you want are here:
It will often help to temporarily connect an Ethernet cable from your Mac to the AirPort Express for the setup. Once the Express is configured, you can disconnect the Ethernet cable and move the Express to the desired location.
http://support.apple.com/kb/HT4259
Although an AirPort Extreme is shown as the extending device in the example, the setup for an AirPort Express is exactly the same

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Ipad does not see airprint priner (HP 2545 all in one ink advantage) despite they are in the same wifi network.

I ve got Ipad 7.1.1 and use airprint printer HP deskjet 2545 ink advantage all in one series which is airprint. Ipad does not see it despite it is in the same wifi network. I have test it through printer. direct printing is available since Ipad finds printer while searching networks? I have allready turn off and restart everthing, reinstalled printer to my laptop to ckeck connection to wifi network, but still ipad cannot see airprint!!what can possilby be happening?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

Notebook does not see mPCIe card (asm1061)

Aloha Community,
i am using an old notebook as a small server (cups/ftp/http/etc).
The Notebook is an old Dell Inspiron 1520.
I attached three 3,5'' HDDs to it which are powered via an external PSU.
the first HDD is connected to the original sata-port.
the other two are connected to a ASMedia ASM1061 Sata-controller. This controller sits on a small mPCIe card which i fitted on one of the three mPCIe slot the Notebook offers me (i tried all three).
In Bios all mPCIe-Slots are activated, still the OS does not see the HDDs.
also lspci seems not to see the card. Any ideas?
arne in ~/ > su arne
Passwort:
+ OS: Arch Linux x86_64
# Hostname: Yoshi
### Kernel Release: 3.19.0-gbdccc4e
##### Machine Hardware name: x86_64
###### Uptime: 0:26
; #####; Packages: 1257
+##.##### Processor Type: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
+########## Root: 572G / 917G (62%) (ext4)
###############+
.######; ;###;`".
#########. .########`
#' `#
[arne@Yoshi ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[arne@Yoshi ~]$
hope you guys can help me!
greetings
Last edited by arch-serv (2015-02-14 00:46:53)

that's the problem i guess... according to the bios settings all mPCIe slots are enabled, still the card does not show up.
arne in ~/ > lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1,9M 0 part
└─sda2 8:2 0 931,5G 0 part /
arne in ~/ > sudo dmesg | grep -i sata
[sudo] password for arne:
[ 0.511917] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.524037] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 26
[ 0.524043] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 26
[ 0.843388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.843416] ata3: SATA link down (SStatus 0 SControl 300)
arne in ~/ >
even without the correct drivers the card shoud show up in the output of lspci shouldn't it?
greetings

E450 disk installation - format does not see disk

We have an E450 with three disk controllers.
One with four drives and two RAID controllers with eight drives. Both RAID controllers are RAID5.
The four drive controller has two 9GB drives.
One RAID controller has eight 9GB drives.
The other RAID controller has eight 18GB drives.
We have three failed 18GB drives and are trying to install new drives, but the system does not see them.
We cannot get the system to recognize the new 18GB drives, even when we put them into the two open slots on the four-drive controller.
Probe-SCSI sees the new drives, but format does not.

Hi cnhllc..
I was wondering what steps you took to resolve this issue?
We put in 8 hard disks and the Solaris OS (format command) recognizes only 6 hard disks. All 8 hard disks are seen when we issue probe-scsi-all, but only 6 are seen using format command. We are running Veritas VM & Cluster Server 3.5.
Any advice will be greatly greatly appreciated.
Thanks in advance.
doreen

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

FCPX does not see my external drive?

Need some help. When I open FCP it identifies my external hard drive for a second or two but then it disappears. I can see it in the finder and on my desktop no problem. Also, when I start a new event it does not see my external videos hard drive. It is a brand new Seagate - I have not used it for time machine back ups and before I upgraded to Lion it worked fine. Now I can't bring in projects that I saved to the external Hard drive. I'm new to this software so I would really appreciate some help as I can't even begin to contemplate doing this project a third time.

Take a look at the name of the drive, as well as to the names of folders at the root of that drive.
FCP is probably treating your drive as a camera. You may know for sure by selecting File->Import from Camera and see if your drive appears there.
Don't call your drive "Video", for instance - and avoid common names used in camera folders, like "DCIM".

IBook G4 Airport Extreme does not see any SSID

Hi,
My iBook 1,2 Ghz has been working great for several years now.
I am working with Mac OS X Tiger (10.4.11) for quite some time
and it never let me down. I connect to the internet using an Airport Express
connected to a speedtouch router.
The Airport Express Card in my iBook always found 6 or 7 SSID's of other
Wireless Networks in my neighbourhood and it used to login automatically on
my Airport Express wireless wetwork station.
Last week it suddenly stopped working correctly.
After starting OS X on my laptop the little Airport icon in the upper bar faded out grey.
When I click it it says it can't find any networks.
I checked all my settings, downgraded my Airport Extensions
and even installed a spare (refurbished) Airport Extreme Card.
Even with another Airport Extreme Card it does not see any wireless networks.
My other macs, a unibody MacBook Pro and white MacBook work fine with the Airport Express.
What could be wrong? Am I overlooking something here? Can somebody help me out?
How can i get my Airport Express/iBook G4 connected to my wireless network again?

Hi Elko,
Thanks for the reply.
I re-installed the original Airport Extreme card into the slot again.
But now i pushed it harder than the first time. (just like you said)
I noticed the second click, but that doesn't seem to be the problem.
Both Airport Cards (the original and the new) were installed correctly.
I also checked the antenna connection but that is seated o.k. too.
After re-installing the card, i booted into Mac OS X Tiger and checked the ASP.
It says a Airport Extreme Card is installed with firmware version 405.1 (3.90.34.0.p.18)
and the langauge version is international/worldwide. So far, so good.
Nevertheless the airport card does still not find any wireless networks or SSID's after
scanning multiple times. (Location on automatic)
I am planning an upgrade to Leopard today. Maybe that's gonna help, since there were some Airport Extreme updates in Leopard. If that's not the solution, I will stay with your other suggestion and buy me a nice USB dongle.
Do you have any idea what type of dongles work best with Leopard? I have seen some different models, but a lot of dongles require third-party software to make it work and are not automatically recognized by OS X.

Installer does not see hard drive, how do I mount

Initialized Hard Drive with current volume and as mac extended and zero'd out memory. This drive came out of a PC that had been out of whack and drive was partitioned wrong in the PC. It worked fine to load mac OS 9.2.2 and has 18 gigs free. When I boot off of the Tiger disc it does not see the hard drive at all. Neither does the disc utility function. I checked the firm ware and it is up to date. Ran disk warrior and it says all is ok. Is it something simple?
I can't figure out what it is I have over looked. Thanks

Try this instead:
1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
If this is the second drive in your computer, be sure you have jumpered the drive as SLAVE (assuming the original hard drive is jumpered as MASTER.)

Solaris does not see second cpu

Similar Messages

Maybe you are looking for