Solaris: How do I specify the user under which the WLS runs?

I just upgraded from WLS 5 to 8. OS is Solaris 8.
Configuration is one single admin server which also acts as the only managed server.
The admin server must start up as root so that the users don't have to specify the port :443 at the URL (don't ask me why, but it seems to be the fact on Solaris).
After starting, I want the server java process to actually run as another user than root. How to I do this?
It worked on the old Solaris server with WLS 5.1, and I have an idea that it had something to do with the command line option -Dweblogic.system.user=. That option has no effect when trying it with WLS 8.1.
This must be a common task when running WLS on Solaris. But I cannot figure it out, and a thousand users are waiting for the application to start up. Can anyone tell me how to do this?
Regards,
Anders.

If you logged in as userx and started server, the weblogic server process will be started as userx.
If you want usery to start server, then you need to give permissions accordingly, though you have installed the weblogic as root.
-Dweblogic.system.user=, option works only when this user has rwx permissions to various files under weblogic dir (log files, applications, .....).
Regards
Sree

Similar Messages

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

HT1277 how do i specify the default mail account

how do i specify the default mail account if i have more than one accounts?
Not to worry i have found the setting, thanks
Message was edited by: Teli Proto

hmmm.. I've been complaining about this to the engineers for over a year. The storage location should be chooseable as should there also be a backup feature (as in Addressbook and iCal).
for those that want to change this... it would be cool for someone to write a non cryptic, complete 1,2,3 stepped procedure.
That is.. exactly what do you change to what in the mail user preference file? And what do you use to change it.. text edit? "[ ]" heretofor = folder
I would like to change my Mail storage location to the my [Documents] . Using Text Edit, I went into my user [Library], to [Preferences] and opened the com.apple.mail.plist and changed all the ~/Library/mail storage locations to ~/Documents/Mail
lastly I moved the [Mail] that was in the [Library] to my [Documents].
Didn't work. Restarting Mail got me into the guided set a new account (and as far as I can see there IS no way of not taking the guided set up as alledged above). There must be something, some built-in direction other than in the [Preferences] defaulting mail to be saved in the [Library] folder
If someone has done this and been successful.. a 1,2,3.. list would be apprecaited... and please don't leave any details out. Thanks
dual core Intel G5 Mac OS X (10.4.5) Pismo powerbook specialist

HT202213 Our house has a computer, 3 ipods, 2 iPhones, 2 iPad Mini's and 1 family iPad = 9 devices. I one have one Apple account currently. How do I move exisitng users under my account to their own Apple account

Our house has a computer, 3 ipods, 2 iPhones, 2 iPad Mini's and 1 family iPad = 9 devices. I one have one Apple account currently. How do I move exisitng users under my account to their own Apple account

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How do I specify the JRE i wish to use to Run an Application.

Hi Everyone;
Please bear with me if you read this before.
I have installed java 1.3.1 and java 1.4.1 in that order.
The JRE used by default is java 1.4.1
How do I specify the JRE I wish to use to Run an Application from a command prompt.
Example:
Java -something org.jboss.Main
help ??
Stephen

I was a lil embarrassed. I told my supervisor that the installation of java overwrites the JRE and that's that.
My supervisor took 10 minutes and went through it and found java.exe in the System32 file.
The java.exe file is found in guess where "C:/WINNT/System32/" folder how nice. C:/WINNT/System32/ is in the path. Not only that it's the first entry in the path. So when I execute java it is not using java.exe any one of the java files that I got from the java website.
So I don't have any control over the version.
Oh well;
That's life. That's 1 for my supervisor.
Stephen

How do i specify the port form where i want to send the mails

i have smtp server which by default has proxy at port 25.So i want to send the mails through some other port.So how can i specify the exact port in the bean(i am using a bean to send email) so that all the mails through that port.my machine is having public ip.so what i do is Properties prop = new Properties();
prop.put("mail.smtp.host",hostname);but how do i specify the port name coz this sends the mail at port 25 by default.

prop.put("mail.smtp.port",portnumber)

How can I specify the path in Form Builder 9.0

Hi, everyone,
could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
besides, when I run a form, sometime there will be a warnig:
Please acknowledge message
what's that meaning?
thank you very much for your great help

Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
but, when I open my form, it always suggest me:
FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
have a good weekend :-)

How we can get the current running user information in BusinessOne

Hi experts,
How we can get the current running user information in BusinessOne Application,
Based on the user details i want to assign some functionality,
Regards,
Saidarao yakkala

Hi,
As per me you can't get detail by server side.
If you want to know who are connected then you can use sp_who2 procedure in SQL query.
That will display who are login.
For more detail you have to check LOG file on client side in SAP B1 > Log folder.
Thanks
Kevin

How can I specify the attribute AU_SIZE in OUI

Hello,
How can I specify the AU_SIZE when i create the disk group for OCR and Voting disk when i install the GI home.
Basically i want to create the Disk group with AU_SIZE as 4MB when i create it Via OUI.I know I can edit the attributes when i do using ASMCA.But not sure about OUI.
Please can someone guide me ?
Regards
Joe

Hi Joe,
Did you mean that i will need to move the OCR/voting **** to another diskgroup -> drop the one created during installtion -> recrerate the diskgroup with AU_SIZE as desired Yes.. you must move OCR, VOTING and ASM SPFILE to another diskgroup and recreate the diskgroup.
Doc said : Oracle recommends that the allocation unit (AU) size for a disk group be set to 4 megabytes (MB).
I do not see benefits to configure the AU SIZE 4MBytes for diskgroup that will store only Clusterware Files.
The voting files are stored directly on ASM Disk (i.e not use AU SIZE). The OCR File and ASM SPFILE use AU SIZE, but are not frequently accessed (low I/O) and files are too small to configure AU to 4MBytes.
Set AU SIZE makes a difference when you do need high I/O throughput. i.e: Used to Diskgroup that will store Datafiles.
I recommend you read my point of view how to store VOTING Files, OCR and ASM SPFILE on ASM.
Re: 3rd voting disk on nfs share
Regards,
Levi Pereira

How can we specify the number of decimals to be printed

How can we specify the number of decimals to be printed
such as "%5.2d" in C.
Can anyone help me

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can we let the program run in backgroud automatically?

normally,we need to find peak off time run big program
that read pooled table and slowly.
How can we let the program run in backgroud automatically?
BTW:before that pop a window just give runner a notice.

Here is an example, try this one.
REPORT ztest.
PARAMETERS: p_vbeln LIKE vbak-vbeln,
            p_bkrun NO-DISPLAY.
DATA: ls_vbak LIKE vbak.
DATA: v_answer,
      v_jobcount LIKE tbtcjob-jobcount.
IF p_bkrun IS INITIAL.
*-- not background processing
    CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
              textline1      = 'This may time out.'
              textline2      = 'Do you want to run in background?'
              titel          = 'Warning!!!'
              cancel_display = space
         IMPORTING
              answer         = v_answer.
    IF v_answer = 'J'.
*-- run in the background
      CALL FUNCTION 'JOB_OPEN'
           EXPORTING
                jobname          = 'ZTEST'
           IMPORTING
                jobcount         = v_jobcount
           EXCEPTIONS
                cant_create_job = 1
                invalid_job_data = 2
                jobname_missing = 3
                OTHERS           = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
*-- submit the program in the background
      SUBMIT ztest
        WITH p_bkrun = 'X'
        WITH p_vbeln = p_vbeln
        USER sy-uname
        VIA JOB 'ZTEST' NUMBER v_jobcount AND RETURN.
*-- close the job
      CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                jobcount             = v_jobcount
                jobname              = 'ZTEST'
                strtimmed            = 'X'
           EXCEPTIONS
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                OTHERS               = 8.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'W' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      EXIT.
    ELSE.
      CLEAR v_answer.
    ENDIF.
ENDIF.
CHECK v_answer IS INITIAL.
SELECT SINGLE * FROM vbak
                  INTO ls_vbak
                 WHERE vbeln = p_vbeln.
IF sy-subrc <> 0.
    WRITE:/ 'Invalid Order Id.'.
ENDIF.
END-OF-SELECTION.
CHECK v_answer IS INITIAL.
IF p_bkrun IS INITIAL.
    WRITE:/ 'Here is the result running the program in foreground.'.
ELSE.
    WRITE:/ 'Here is the result running the program in background.'.
ENDIF.
WRITE:/ ls_vbak-vbeln,
          ls_vbak-vkorg.

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

In LV, using TS API, how do I specify the VI module for a Pass/Fail step?

I am writing a LabView VI which will let a user write a TestStand sequence. Each step in the seq is the same type, a Pass/Fail test. I need to specify for each step the LabView VI module location, and an input buffer. I am having difficulty finding out how to specify the module for the step using the TestStand API in LabView. How to do this????

Hi Drew,
I think Dennis might have come at this from the wrong angle.
Have a look at the example that ships with TestStand under
\Examples\SequenceBuilderTool\LabVIEW
This might give some clues, but I'd suggest posting this question over to the TestStand discussion Forum as suggested by Dennis.
There'll be a few more people there who can help a bit more in-depth
My personal suggestion is to create a custom step type that calls the .vi's and then you can create the steps in a new sequence file using your tool easily. This could be cumbersome for you if you already have a lot of steps setup.
Better then to create a resource to get the steps out of to clone them by creating a sequence file which is full of your steps. When you have a handl
e to a cloned step, you can change properties about it in memory, before putting it into the sequence (i.e. change it's name and stuff)
Otherwise you need to get the type and create a new step of this type.
If all you're stugling with is the module to call, then for the step you have a handle to, change the
you can either change the "Step.TS.SData.ViPath" as a string (TestStand set property value String with a reference to the sequence_context) or if you wanted to bring up the specify module dialog, if you have a handle to the step itself, call the method SpecifyModule.
Hope that helps
Sacha.
// it takes almost no time to rate an answer

How can we specify date time under History Tab of Imaging

Hi
I am using Oracle Webcenter Imaging 11.1.1.5, when i search for a document and view it, under History tab i have following information available.
Date and User
The date specifies the date when it was modified and user specifies UserName who modified it.
I want date time over there instead of date.
Can someone help me how to achieve this?
Regards
ACM

In answer to your original question:
970992 wrote:
However, when I look at the execution plan, I see that the last predicate (to_number(answer) > 0) has been executed the first. Henceforth, it checks many rows first. Normally, 75 rows belong to 31/12/2012 as you see from the following. Can I specify the execution order?According to the execution plan, it will do a full scan of surveys using the predicate on insertdate to build the (presumably in-memory) hash table (hash based on survey_id) to do the joins (Step 2). Then, it does a full scan of the answers table using the question_uid and answer predicates (Step 3). For each row it finds that matches those predicate, it will prpobe the hash table created in step 2 using the hashed value of survey_seq_id. So, it is doing the insertdate predicate first.
In answer to your last post
970992 wrote:
>
First of all i would get rid of the implizit type conversion:
TO_NUMBER("A"."ANSWER")>0)it is not implicit conversion, I reckon it is explicit type conversion, isnt it?
No, it is an implicit type conversion. Your code says answer > 0, since the answer column is a varchar2 column, Oracle implicitly converts the answer column to a number to compare against the number on the right side of the comparison. Note that if something like 'A' ever becomes a valid answer, then this query will fail with ORA-01722: invalid number.
>
>
Obviously "A"."ANSWER" is not a number colmun, problably varchar, so use something like
A.ANSWER != "0"
or
A.ANSWER > "0"Yes answer column is varchar2 but can you type A.ANSWER > "0" as a predicate? I mean, you can not varchar > varchar, can you?
Of course you can use inequality predicates on a varcahr column. Is the string A greater than the string B?
Based on the explain plan, your statistics might be a little off, not hugely so. The esitmates are at least in the right order of magnitude based on what you have posted so far.
What indexes, if any, are available on the two tables?
John

Solaris: How do I specify the user under which the WLS runs?

Similar Messages

Maybe you are looking for