Solaris Install (Sparc) cannot find disk

When I do a 'boot cdrom' from the OK prompt, it goes through installation, but stops about 50% in saying 'no disk detected, check connection, etc..'
There is a disk, and the installed hard drive was formatted using a command string in linux by the vendor, but the Solaris install doesn't see it.
Any ideas?

jkcwong, is that the message:
<pre>
SunOS Secondary Boot version 3.00
prom_panic: Could not mount filesystem
Entering boot debugger:
[12ff05]:
</pre>
you get when you boot from the DCA floppy? According to some sun
engineer that's a
solaris bug (bug
4344312), and the upcomming patches
108822-02 / 110930-01 are expected to fix this problem.
Since the problem is ACPI related, perhaps your bios has an option to
disable ACPI support?

Similar Messages

I factory restored my iphone and now it is stuck in repair mode. i cannot connect to itunes to restore as i get error "itunes cannot find disk"

i restored my iphone4 to factory settings because it was running slow and some apps werent working. My phone is now stuck in repair mode and is continually rebooting itself. I know the usual solution would be to restore via itunes but itunes will not allow me to do anything as i get the error "itunes cannot find disk"

Place your phone in DFU mode (search Google) and restore

Just downloaded lion in says its installed but cannot find it but its paid for by wizz

just downloaded lion in says its installed but cannot find it but its paid for by wizz

Look in the Dock or the Applications folder for an installer for Lion. Then run it.

After installing leopard cannot find saved mail

I installed Leopard yesterday and now cannot find saved email from tiger, Also when I create a save mail box it says I have one but it does not appear in the mailbox list??? Also how do I enlarge the text names of mailboxes like inbox, junk,trash.etc??// jim_joh

I had tiger and winxp on my 20 duo intel so I inserted leopard disk and followed instructions on both mac & pc side. The mailboxes I am talking about was on tiger. They must be hidden somewhere because when I try to create a save mailbox the message appears saying I already have a save mailbox in library,mail,mailboxes but I cannot find them???? jim_joh

Problem installing EZDrummer -- "cannot find soundfiles"

Hi
I've just installed EZdrummer, but on opening it up in Logic I'm getting:
"EZdrummer cannot find the soundfiles. Re-install EZdrummer or move the sounds to
/Volume/Mac/EZDrummer/Sounds"
I've tried re-installing but the same thing happens.
Also, I can't install the "Soundmover" (just getting an error installing message)-- could this be the problem?
Help would be appreciated!

Before anything else, log in (and/or register) at the [Toontrack|http://www.toontrack.com/my_products.asp] site and download the latest version (1.2) of EZD. As you have no idea how long the disks you just bought have been sitting on the shelf, the chances are that the version on the disks is out of date.
Also, I can't install the "Soundmover" (just getting an error installing message)-- could this be the problem?
You don't need that initially, and it isn't 'installed' it's just placed in /Applications/Toontrack in case you want to move the sound library later - to another disk, for example.

Cannot Install - Installer cannot find file

A colleague and I are getting the same error when trying to install this software.
The installer extracts files into the temp directory, then an error pops up saying "The system cannot find the files pecified." I can see that it is trying to find "hpzrein01.exe" with "hpqins15.dat" included as a parameter. I can see the .dat file in the specified directory, but the .exe does not exist in the folder that the installer deposited the extracted files.
Any help would be appreciated. I did some web searches, but did not find a solution.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Facebook installed but cannot find

Pardon my ignorance. I attempted to update to a new version of Facebook, but after updating I couldn't find it listed anywhere. I then went into AppWorld and installed it again. When I now go into AppWorld it says "Installed" but again I cannot find it. (I have never downloaded anything in AppWorld anymore.) Thoughts?
Solved!
Go to Solution.

1. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
2. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem installing Leopard - Cannot find 10.4.

Hi there, I purchased my Macbook Pro in Nov 2007 and inside the box was an upgrade disc to Leopard. I've been getting on fine with 10.4.11, but got Call of Duty 4 for Christmas and am now having to upgrade to Leopard. The Installation disc restarts my machine, I select "English" as my preferred language, then it says it cannot find 10.4 on my machine.
Can anyone shed any light on this?
Thanks in advance, and Merry Christmas!

Hi KI4KWF;
Adding your question to the bottom of another question that is marked as solved is not the best way to get it noticed. I would suggest that you start your own thread for your question.
Allan

Forgot initial set up password - cannot find disk??????

My Mac won't let me change my password as i cannot remember my original set up password when i go to MY Account. I have tried everything imaginable but it continues to say "incorrect password". I do not have the disk to re- set up or my computer man could have installed it - What should i do???????
There must be a way to start over or clear old passwords on Apple and start all over?
Now i have no access to do any Apple changes w/o the password! Please help??????????

Hi and welcome to Apple Discussions.
Im afraid you have a problem using your password, and as you dont have an installation disk It is impossible to reset it. You could try and borrow a disk off of a friend, or the only other way to get one would be illegally, but I cannot recommend that at all on these forums. Don't do it.
If you do get hold of the disk, click on the link below to see instructions on how to reset the password:
[Changing or Resetting Passwords|http://support.apple.com/kb/ht1274]
Hope This has helped.

10.5.3 update will not install..cannot find iTunes msi, 10.5.3 update will not install..cannot find iTunes msi

how do I correct iTunes to find the msi so I can install the lastest update 10.5.3?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I bought adobe acrobat x1 pro and am trying to install.I cannot find my serial

I purchased this software fro an employee of adobe but i can't load it without the serial. I am including the cd info.I hope this will help you.
CD Part Number ESD
CD Description Acrobat Professional AcrobatPro_11_Web_WWMUI.dmg,AcrobatPro_11_Web_WWMUI.xml
Build Date = 20120923203422

The serial number is usually found on the disk case.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html
https://redeem.licenses.adobe.com/getserial

Install can not find disk drive

I'm trying to load Solaris 8 on a brand new Compaq Proliant 800 with 64Mb RAM and 2.1Gb SCSI Ultra Wide 3 hard drive. The system has all Compaq components and the server is listed in the Sun Hardware Compatibility List.
I'm getting the no compatible hard drive found when the install is searching for a hard drive to write the OS. How do I go about fixing this problem? I purposely bought the Proliant 800 and avoided adding any additional drives/memory because I want to avoid compatibility issues. Do I need to download a driver to support the controler that came with the Compaq Proliant 800?
Any hints will be greatly appreciated. Thanks,

jkcwong, is that the message:
<pre>
SunOS Secondary Boot version 3.00
prom_panic: Could not mount filesystem
Entering boot debugger:
[12ff05]:
</pre>
you get when you boot from the DCA floppy? According to some sun
engineer that's a
solaris bug (bug
4344312), and the upcomming patches
108822-02 / 110930-01 are expected to fix this problem.
Since the problem is ACPI related, perhaps your bios has an option to
disable ACPI support?

HP install software cannot find a file it should be providing

Windows 7. Fully updated. J6450. When I try to install the Full software, I get an error messages saying that the hpzpnp.ice... file cannot be found. Please advise what I need to do. Thank you.

Hi RickSpurgeon,
I understand that you are getting an error message when trying to install the software. I will try my best to help you resolve this issue. I suggest downloading the HP Printer Install Wizard for Windows to install the software and drivers for you.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

MBP cannot find disk from start-up utility

I'm working with my friend's MBP, and it won't start up. It shows a folder with a question mark on it.
Apparently, he downloaded Mavericks, but didn't install it. The next time he opened his computer, this happened.
So I held option while booting it up and I got to the start-up utility. I tried to repair the disk from disk utility, but the only disks are something like "disk0" and "Mac OS X Utlity" (I can't remember the name exactly. But there were only two.
All the options were grayed out no matter which disk I chose. Additionally, I tried to reinstall Lion (the only option) and it prompted me to select a drive to install to, and none were available.
Is there any solution to this, or is the computer dead? What could have caused this?
Thanks.
Message was edited by: TechnoSam

The computer isn't dead, but the hard drive probably is.

Error During Install - Windows cannot find .\jre\NT\1.5.0\bin\java

HI,
I am new to Oracle and this is my first time trying to install the E Business Suite. I am installing it on Windows Server 2008 R2. I have serached and read a number of threads but I am still not quite sure of the resoulution.
http://kr.forums.oracle.com/forums/thread.jspa?messageID=4026599
EBS 12.1.1 Windows x86 Rapid Install Errors
Install R12 on a Virtual Machine hosted on Windows Vista
I have looked through the above threads. It mentions running the md5sum to check the staging area? I am not sure how to do this - can anyone help here? The softare was downloaded from Oracles e-delievry site - this gives about 30+ zip folders - I extracted each of these files to a folder called stage12 on my desktop and then ran the rapid install. All of the pre-intsall checks completed fine but then it falls over with error above?
Can anyone help - Many Thanks.
Colly (Ireland)

Dear Colly,
Check this following Metalink documents and its mentioned in your refered Hussiens Collection.
We need to run this md5..
MD5 Checksums for R12.1.1 Rapid Install Media [ID 802195.1]
A text file for windown u have to download from the above note,, the file look like this below
866603DE8F29E2266C02EAD5799F3255 *oraAppDB\Disk1\data\driver\Disk1.drv
FC3F14B1FDB2B8C52AD102F0197804AC *oraAppDB\Disk1\data\driver\prod.drv
F50C31A5FC2C2E4599F1AF47D6941AA5 *oraAppDB\Disk1\data\driver\vision.drv
74E49FE67DEC1188BE15F31F2D5337B5 *oraAppDB\Disk1\data\stage\data_dat1152.zip
F8971FF758F65767A8CD831176DAC078 *oraAppDB\Disk1\data\stage\data_dat1155.zip
19B6778AD74B33046C90B619EF832CCF *oraAppDB\Disk1\data\stage\data_dat1156.zip
C36E50C39BE431E0C311EAB9487C5ED0 Just keep the file in the stage folder and do this following method mentioned in metalink
On Windows:
◦MKS Toolkit or cygwin needs to be installed to be able to use mdm5sum.◦
F:\> cd StageR12
F:\StageR12> md5sum --check md5sum_Windows.txt > md5sum_result.txt Regards
HAMEED

Solaris Install (Sparc) cannot find disk

Similar Messages

Maybe you are looking for