Solaris installation form a DVD.

Hi there,
does anyone know how to install Solaris from a DVD without
a Webstart installation?
boot cdrom - nowin
does help - it stops webstart, but not everything goes as it
should during the install process.
The problem is that a program used for disk slicing does it
in a very strange way. First of all it starts swap from sector
0 + offset and the rest of slices (/, /var, /usr, etc.) are
allocated form the last sector to the inside of a drive.
(sector numer - offset, etc.)
No matter what slice numer you specify for a swap,
it always starts from sector 0.
Comapring an installation from a CD, everything is correct and
logical. The numer of a slice corresponds to a layout
of slices on a phisical drive - I suppose CD installer
uses format(1M). What does DVD installer run?
Any help appreciated,
traquair

You can download it and install it.  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Similar Messages

  • No Disk meet the criteria for Solaris installation

    Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
    1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
    2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
    3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
    Appreciate for any help.
    Wallace

    Did you check that your adaptec scsi controller is
    supported by solaris and/or has a working driver
    (from sun or adaptec) ?
    Here's the HCL for solaris 8 x86:
    http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

  • How do I determine what type of Solaris installation I have ?

    I'm runnig "SunOS PSP 5.8 Generic_108528-13 sun4u sparc SUNW,Sun-Fire-480R" but I would like to determine the type of Solaris installation I have....do I have a a "development" installation ? Do I have all the SUNW developer packages ? Also what are the "types of installations" that are possible ?
    I'm thinkig about download the mysql binary (from Sunfreeware.com) and I went to the dpendencies site (http://wwws.sun.com/software/solaris/freeware/s8u7dependencies.html) to check what dependencies exist and I saw the following line (among other non "related" info.):
    mysql-3.23.43 gcmn-1.0 ncurses-5.2
    What exactly does this mean ?

    Hi
    You can check the type of solaris install from the below file
    /var/sadm/system/admin/CLUSTER
    Regards

  • Solaris 8 - No Disks that meet the Criteria in the solaris installer documentation

    Hi there
    I am installin sloaris 8 in Pentium Pro Machine with Quantum Firball Hard
    Disk 10 GB , at installation time the Solaris recognize the existance of the hard disk by givingme the option to load from CD ROm or the Quantum Hard disk but later on it gives me the following message
    No Disks that meet the Criteria in the solaris installer documentation
    Your help will be appreciated
    Thanks

    Hi
    I am using IDE Controller not SCSI, the Hard disk is being partitioned using Dos FDISK , When i got this problem Solrais write this message after the error i mentioned before
    Please Check the system or try another installation option
    then it gives me Unix Prompt , I tried to use FDISK but could not get the right Disk name , I tried FDISK /drv/dsk/c0t0d0s0 or /drv/rdsk/c0t0d0s0
    but no way , I am new to Unix any way , I tried to get the disk name through df,sysdef,prtconf but could not as well , I guess may be the solaris partition is the problem ? may be if i could creat a solaris partition it will solve it ? , I am using the full version of solaris 8 not the beta one.
    Thanks for your help
    Roushdy

  • Link to download X86 Solaris Installation for weblogic 10.3

    Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.
    I am only able to see installables for X86 windows,X86 linus & sparc but nothing for X86 Solaris.

    Hi;
    Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.I belive its not available. Please check :
    WebLogic 10.3 availability?
    Also check certification matrix:
    http://www.oracle.com/technology/support/metalink/index.html
    Regard
    Helios

  • How to get the free space from logical drive for solaris installation?

    Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

    Hi,
    See: http://www.sun.com/software/solaris/self_help.jsp
    At the bottom of that page, FAQ # 3
    HTH,
    John

  • No Disks that meet the citeria in the Solaris installer documentation found. Please check the system or try another installation option #

    I'm tring to install this on an IBM netfinity 5100 server which has ultra 160 scsi drives.I get this message
    "No Disks that meet the citeria in the Solaris installer documentation found. Please check the system or try another installation option #"
    Please help me. I new to UNIX and SOLARIS.Thanks!
    VC

    You are probably using the INSTALL CD that comes with Solaris x86.
    Don't use it but use the Software CD 1/1 to boot and install the system instead. The INSTALL CD is supposed to be used on a completely blank system (no other OS's) although even there I think Software CD 1/1 does the job.
    Also, if you are new to Solaris I advice you to get the FAQ (you can find it on e.g. http://www.science.uva.nl/pub/solaris/solaris2- it should be really helpfull during the first few weeks/months on Solaris

  • Is Perl part of default Solaris Installation ?

    I am devloping an application which invokes a few perl scripts during installation. I just want to know:
    Is Perl part of default/standard Solaris Installation ?
    How safe is it to assume existence of Perl on client-side Solaris System?
    Thanks & Regards,
    Satish

    Perl has been in Solaris in /usr/bin since Solaris 8. I am not completely certain, but I believe it is included in all metaclusters including the minimal Core cluster.
    Richard

  • Flash installation - fatal error. solaris installation program exited

    Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error.
    Any ideas?

    paulfoel wrote:
    Any ideas?http://www.unix.com/solaris/217675-solaris-10-flash-installation-fatal-error-solaris-installation-program-exited.html
    You could have mentioned you were cross-posting this to other sites.

  • Solaris installation - ORA-01034

    On my Solaris installation I am getting a - ORA-01034 error at the Database Configuration Assistsance screen
    olny option I get is to ignore or Abort
    I get about 20% loaded then I get the error
    Any suggestions?

    Hi,
    What are the other messages u r getting.
    R u getting ORA-27102 also.
    This problem is the result of the kernel parameters for Oracle not being setup properly in the /etc/system file.
    Please see the Installation Guide for complete instructions.
    Here is an example of the Oracle related settings in the /etc/system file.
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=100
    set shmsys:shminfo_shmseg=20
    set semsys:seminfo_semmns=2000
    set semsys:seminfo_semmni=70
    Please reboot your machine after making any changes to the /etc/system file.
    Thanks
    Aravind

  • Which Name Service for Solaris installation behind router?

    I want to install Solaris on my computer in a small home LAN behind a router.
    The Solaris computer is not part of a zone, a domain and there is no own DNS server in LAN.
    I want Solaris to get the DNS from router which in turn gets the DNS server assignments from network provider.
    This is similar to a Windows installation which gets the current DNS servers defintion from network provider at connection startup.
    Now what do I have to select during Solaris installation? See attached snapshot
    I guess LDAP, NIS and NIS+ are not suitable.
    Do I have to select "None"?
    Does DNS mean "own DNS server in LAN" or "DNS from router" (as intended)?
    Thank you
    Peter

    Hello
    I don't know you home setup but in general you will have to use DCHP so solaris will get all info from the route the ip and dns etc..
    If you want to use a static ip you will have to config the DNS by hand.
    Regards
    Eze

  • Minimum Solaris installation for Directory Server

    Hello,
    i want to set up a new Solaris installation for Sun ONE directory server.
    But i don't want to install always the "entire distribution" and then turn off all services. I want to keep the solaris os installation as small as possible. Has anybody tried this before and can report some experiences? Is the "reduced network" cluster the right way to go or better the "core" cluster? Does anybody have a list of the packages which must be installed after a minimal solaris installation for the ds to work?
    Thanks a lot,
    af_inet

    Since you original question is "minimum requirement
    at the SERVER", I would say that X is not really
    needed at the server end if you use installer text
    mode CLI (command is "./installer -nodisplay")
    instead of installer graphical mode (GUI). However,
    to fix uninstall/reinstall issue, X is needed as the
    "prodreg" which is used to uninstall packages is a X
    program, without text mode option.This is correct.
    It is not a must to run ./startconsole (X program)
    LOCALLY so as to perform DS admin functions as you
    could always run SUN ONE Console REMOTELY from any
    remote host (Windows or UNIX/Linux) with just the
    console binaries installed. (for large data centre
    env. the LDAP server is usually locked in server room
    away from your desk and you tend to use remote admin
    console).This is correct too. I think it's a matter of taste if i want to install console on the DS itself or on a separate host. As long as i have only one DS i will leave it on the machine itself. But you are right, this is not a must. So i should have asked my question more precicely :-)
    Thank you very much,
    Chris

  • Step by Step RAC 11GR2 with Grid Infrastructure on Solaris installation

    Y'ello All,
    Please I need documentation for RAC 11GR2 with Grid Infrastructure on Solaris installation urgently.
    Thany you very much for your support
    BR,

    What type of shared storage will you be using?
    Properly configure DNS
    Properly configure /etc/hosts files
    Properly configure SCAN
    Properly configure SHARED storage (Preferably ASM - "raw" devices) - make sure you partition the disk devices to "skip" the first 1MB of the device)
    BEFORE installation, confirm grid-owner and oracle-rdbms-owner can read AND write to these shared devices from ALL nodes. Permissions must be set to <grid-owner:<grid+oracle shared group> (grid:oinstall where oracle is also in the oinstall group)
    Properly configure ssh password-less connections for both GRID-owner AND oracle-rdbms-owner.
    IP addresses required
    3 SCAN addresses that point to myhost-scan.mydomain.tld in a round-robin fashion
    PER NODE:
    1 public IP address
    1 virtual IP address
    1 interconnect IP address should be iin /etc/hosts ONLY - Non-routable and not reachable via the public interface. DO NOT use CROSSOVER cable.
    Interconnect should be on a DEDICATED INTERCONNECT switch.
    As for the SHARED storage, the LUNS/Devices can be "carved" out on your SAN by your SAN admin. MAKE SURE that ALL devices in a given diskgroup are EQUAL size. (ie - DATA000=250GB/each, DATA001 500GB/each etc)
    The installation guide gives a lot of directions on PRE-REQUISITES. Follow them. And remember, since you are new to this, you may install this several times before you get it the way you need it to be. Even installing MANY RAC clusters on multiple platforms, I still install it 2-3 times. Generally because the SA has forgotten some pre-req step.

  • Solaris installation DVD lost

    Good morning,
    In conclusion of thread "https://forums.oracle.com/forums/message.jspa?messageID=10881333" (Installation of patch "118833-36"), I would like to install Solaris 10 on a T5120 machine. Therefore I need Solaris 10, edition 06/06 (1/06/2006).
    Does anybody know the link where I can download that DVD? (I have an Oracle support login that I can use for doing the download, but I don't know the URL)
    Thanks
    Dominique

    For this platform, you can use any versions that are egal or more recent that Solaris 10 8/07 (U4) or Solaris 10 10/08 (U6) for SATA DVD Support.
    The U11 version is downloadable directly on www.oracle.com website. But any older versions, please check MOS document ID # [1277964.1|https://support.oracle.com/epmos/faces/DocContentDisplay?id=1277964.1]

  • Solaris 10 sparc boot dvd

    Hi,
    i need to make standalone jumpstart bootable solaris 10 sparc dvd but i have some problems with the new installation process. i readed all the scripts in the boot process but i don't now what i need to change and where i need to change it in order to have this customized dvd.
    I follow the blueprints for solaris 9 and i had no problems !!
    best regards,

    hi spammy,
    yep, the link to slice 1 is only on the Cdrom version,not on the DVD.
    i configured in the same manner my Solaris 10 as Solaris 9 but after the "boot cdrom -install" command, the installation don't find the config files (sysidcfg,rules.ok etc...) and then return in the interactive mode.
    Where should i place the config files ?
    Is there the need of changing some scripts in Solaris 10 ?

Maybe you are looking for