Solaris installer starts but freezes

Hi,
I am trying to install solaris 10 on my ultra 5 system. I downloaded the isos burned them and booted my ultra with boot cdrom . The installer starts, prints a copyright message from sun and after a while freezes. Boot cdrom -v showed me that it does a probe for my hardware and after it detects the processor it stops . I can stop-a so the machine didnt freeze.
i Tryed different cdrom units or burning the cd1 iso to lower speeds (4x was teh lowest) but still nothing.
My ultra has 64mb ram.
Any help would be apreciated.
Regards,

i'm having the same problem.. any help would be greatly appreciated

Similar Messages

I can't upgrade my iPhone 4 to iOS 5.1.1 from the iPhone using wifi!! the installation start but before finishing an error occurred and the installation stop! help

I can't upgrade my iPhone 4 to iOS 5.1.1 from the iPhone using wifi!! the installation start but before finishing an error occurred and the installation stop! help

I will try, and what happen is that after it is intall and start "Preparing upgrade" the installation stop and a message occure: An error occure download the iOS 5.1.1" thas all.
But now it is too late because the iOS 6 is now availabel, is it recommendet to donwload iOS 6 on iPhone 4 or not?

Problem installating Snow Leopard on old Macbook Pro with Intel Core 2 Duo. After creating partition on internal hard disk (Extended Journaled), installation starts but stops at half of the progress bar. Screen asking Restart appears.

Hello:
I have tried installing Snow Leopard via the installation disc on a Macbook Pro (2007) with an Intel Core 2 Duo, but I the installation has failed more than 5 times.
I have first formatted and partitioned the internal hard disk with Mac Os Extended Journal format.
Once the installation starts, it starts without a problem unti lthe progress bar gest until half completed then a screen asking for a Computer Restart shows up.
It asks to press the power button for some time until it the computer shuts down and then, press again to turn it on.
Once turned on, the installation disc gets readed, the installation screen appears again and asks again to start the whole installation process form the beginning.

Then you have a Hardware Problem.
Your system is Crashing part way through the install and Re-Booting because of the crash.
Could be the drive itself or it could be some other hardware part in your system. Like the RAM.
To check if it is the internal drive connect an External drive to the system by USB and do the install on that external. If the install completes then it more then likely the drive is bad. If it crashes again then it is more then likely some other piece of hardware in your system.

Installation finishes but freezes when it begins to load.

Hi,
I've got and eMac with a new hard drive that I installed Panther on. It finished the installation but as soon as it starts to load regularly it freezes at the point where I can see the menu bar across the top of the screen, and that's it. I can boot into safe mode just fine. Also, another thing I noticed is that when it freezes there are black horizontal lines across the screen, some of them are shot, some long. When I'm in safe mode those lines aren't there. Anyone have any ideas on what the problem may be?

What model eMac is it? The procesor speed should suffice for identification.
What operating system came on the computer?
If Panther was an upgrade from the original OS version, did you use a full retail install disk set or the gray system disks that came with another model Mac? The gray disks can cause problems unless they are the ones that came with the computer or one of exactly the same model.

Flash Player 11 installer started but the installation dialog was not shown

I am using Windows 7 Ultimate 64-bit and did not have any firewall software installed.
Task Manager showed that the installer “install_flash_player_ax_64bit.exe” was running but the installation dialog did not show. After about a minute, the installer itself closed automatically.
I have tried the following tasks but were of no avail:
(1) Uninstalled previous version via “Control Panel” -> “Programs and Features” and deleted folders named with “Macromed” and “Flash Player”
(2) Uninstalled Acrobat
(3) Reset Internet Explorer settings
(4) Cleaned up everything left behind the Windows temporary folders
This problem also occurred when I tried to install Acrobat Reader X.
Please advise if I missed anything before a fresh installation, or whether there’s a necessity to reinstall my PC so as to get the installer works again.
Thank you very much in advance.

I could install Flash Player 11 successfully using the offline installer.
However, I have no idea about why the online installer of Flash Player and Reader do not work at all - started in the background and closes automatically after about a minute

MacBook tries to start but freezes over and over again

Tried to start it but it freezes so I have to start again. Gets half way started, and then freezes.

Reinstall OS X. What version are your using?

Download starts but freezes up at around 20%

No matter what I do the download keeps freezing up in the same spot. I've run as admin, rebooted, cleared cache but it still stops at the same point. yes, i've tried saving to desktop and the default, didn't work. I'd download it on my mac but it only will download the mac version. I wish there was a direct link and not this download manager. anyone find what worked for them? thanks.
trying to download cs6 web premium using windows 7 64bit

Please try initiating a direct download by utilizing the steps listed in http://forums.adobe.com/thread/981369.

G4 starts but freezes while trying to load

My G4 has been acting strangely lately - occasionally when I boot up, nothing lights up. Then, a few weeks ago, I booted up and it said the computer could not load. These were both temporary occurences... but last night I rebooted my computer after it crashed, and now it only loads so far as the Mac OX loading page, and freezes right at the very beginning of loading. I've tried this several times and nothing has changed. Can anyone please help me here? Is this a typical problem, and one that can be fixed?

here is a couple of links to look at which might help. http://www.thexlab.com/faqs/startupitems.html http://www.macfixit.com/ http://docs.info.apple.com/article.html?artnum=2238

Computer starts but freeze

when I start I get a message: Panic (cpu O caller 0X003AB787) unable to find driver for this platform "ACPI"
I tried to reboot W/install disc but wont excecute? I tested the hardware and had no problem response? How do I get it started? Thanks

I see you've put Windoze XP I'll give you answer for osx, try running and quitting garageband.
I had this problem and it worked for me, don't know why!
Found the answer after downloading Audacity and it trashed my sounds! So thanks to poster on their forums.
Nick
imac 20 g5 Mac OS X (10.4.6)

SP3 Almost completes installation but freezes at the Finishing stage showing "Running processes after install"

I have an HP Pavilion zd7000 laptop with Windows XP & SP2 update installed. Processor is Intel Pentium 4. My system is clean with no rubbish software running. I have several anti-malware & anti-spyware systems installed but they are dormant & not running during the attempted installation. SP3 almost completes installation but freezes at "Finishing" stage showing "Running processes after install". Anti-virus is of course switched off. The system then hangs fore-ever with hard disc activity showing intermittently but nothing else happening. Luckily, by holding down the laptop on/off switch I can always eventually restore to previous settings & recover full use but without SP3! This is annoying & frustrating. I have seen a lot of threads about this problem but no real answers. Can anyone help please?

What is Shmrate.exe is not running?
This can be read two different ways
One well if you look at it like this
User>shmgrate>Operating system>drivers>computer. Result is denied!
If you have something like this
User > User Account Control >Operating system>drivers>computer. Result is denied again!
Note that an adminstrator is only a adminstrator and Computer Adminstrator can install Sp(s). Which I believe is tyour question. Which is my guess.
Which is the reason some people reccommend installing from the "Adminstrator" account Which generally is not a User account. Yes some people add and modify there account access by using Subinacl.exe and reset.cmd, which bumps the account from adminstrator to Computer Adminstrator. An alternative is to boot into safe mode. Pressing the *F8* key before the windows welcome screen starts up. And selecting safe mode. Which is why more people report success with using the .ISO install.
To add to your confusion. Windows Sp2 usually has windows installer 3.0, or windows installer 3.1
Table us types of accounts. I wish windows 200 documentation had made it completely into Xps documentation. They had an excellent table with tthe types of accounts
Limited user. Not able to run more then basic programs. Not able to ;install device drivers, not able to install progras, not able to install Sp(s)s
Power user Able to run more advanced programs. IE Defragger.
adminstrator. Mess with the operating system, back up things, able to install programs, add users.When Windows Xp is installed this is the type of user associated with adminstrator. NOT CA
Computer adminstrator. Able to Install of all things Sp(s).
Hopefully this helps you out. Of course there is the release notes, Xp solution center and of course things to do before installing Sp3.
Keith

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

InDesign CS4 Mac starts but then freezes

Indesign CS4 Mac starts up but freezes from there. Trying to open files or create new ones results in the filename appearing at the bottom of the Window drop-down menu, but the file doesnt appear on-screen.
The same result occurs when opening files using "Open Recent File" as well as double-clicking the file in Finder or using "Open With" in FInder.
It couldnt have picked a worse time to crap out - right in the middle of an urgent contract!! Dang Cleetus!!
Any suggestions - apart from re-installing the program?
Cheers,
John

Tried renaming InDesign Saved data and InDesign Defaults and restarting InDesign - that didnt seem to fix the problem - after re-starting InDesign it seemed the program didnt write new versions of the files on re-start.
Will head back to the office & connect to my 23" display & see if ID works OK with that - that would confirm that it's a screen pointing issue?
Would re-installing ID help?
Cheers,
John

Downloaded this game, "Where's My Water 2" and before I can even start it asks for my age but freezes and wont move. I've rebooted, turned off, removed and reinstalled and it still wont work but on all my previous iPhones it worked fine.

Downloaded this game, "Where's My Water 2" and before I can even start it asks for my age but freezes and wont move. I've rebooted, turned off, removed and reinstalled and it still wont work but on all my previous iPhones it worked fine.

Sorry if I sound stupid but how do I contact the developer? Where would I find that information?

Since yesterday my iphone 4 has started to freeze intermittently when unlocking. When it happens nothing happens (left it for an hour last night) until I reset the phone, but it's done it 5 times today. Never had this prob before. Any thoughts?

Since yesterday my iphone 4 has started to freeze intermittently when unlocking. When it happens nothing happens (left it for an hour last night) until I reset the phone, but it's done it 5 times today. Never had this prob before. Any thoughts?

I had the same problem (freezing iphone when trying to unlock) today.
1) I made a backup of my iphone using itunes.
2) Went to my service provider and made a sim swap. So, I think there was a problem with the nano simcard.
Problem solved.

Old IMAC with 10.5.6 OSX. Forgot Administrator password. Started up from OSX install disc 1 and selected password reset from utilies in Installer. But HD icon doesn't show up. (Only install disc and admin root available:no good). What can I do?

Old IMAC with 10.5.6 OSX. Forgot Administrator password (which I had already changed.) Followed instructions as per http://support.apple.com/kb/HT1274
Started up from the original OSX install disc 1 and selected "Password reset" from "utilies" in Installer. But HD icon doesn't show up. (Only install disc and admin root available:no good as the support website underscores: Important: Do not select "System Administrator (root)". This is actually the root user. You should not confuse it with a normal administrator account.).
What can I do?
Thanks for your suggestions. Antonio

Not familiar with that version of OS X but try using Terminal and type in resetpassword. If that brings up a password reset screen is your original username shown?

Solaris installer starts but freezes

Similar Messages

Maybe you are looking for