Solaris Management Console hung up - not responding.

When I select User Accounts in SMC the console is hung up - it just displays the watch pointer . The SMC server gives a status that it is running.
Ideas anyone?

As suggested, what were you doing when it hung ? When it happened to me it was after a fresh install then the cluster patch. After the cluster the advanced area of disc admin to my fiber channel arrays went off into lala land. Was just starting to getinto the 'why' when the customer wanted to go to 10.. it was on a 280R with a qlogic fc card to a couple of A1000 array's, never did find out why.

Similar Messages

Solaris Management Console toolbox could not be loaded

Hello,
when I start SMC I get this error, toolbox http://ultra:989/toolboxes/smc.tbx could not be loaded. I only noticed this yesterday, and I think it is related to some patch that was applied recently. When I did wget http://ultra:898/toolboxes/smc.tbx I got these headers
HTTP/1.0 200 OK
Date: Thu, 27 Oct 02005 21:21:52 GMT
Server: Tomcat/2.1
Content-Type: text/plain
Servlet-Engine: Tomcat/2.1 (Java 1.4.0_01; SunOS 5.9 sparc; java.vendor=Sun Microsystems Inc.)
Last-Modified: Tue, 31 Aug 02004 21:27:14 GMT
and wget complains of
Last-modified header invalid -- time-stamp ignored.
perhaps it is this header that's invalidating the download and so SMC complains?
This is solaris 9 on an ultra 5, fully patched (up to yesterday).
Thanks for your help!

I seem to have come across the same issue as well. On an Ultra 2, I'm running Solaris 10 1/06 (after an upgrade from Solaris 10 5/05). SMC 2.1 was working fine before I applied the latest Recommended Solaris 10 patch cluster. Now when starting smc, I get the message,
"Server Not Running
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running."
with stop signs for all the management tools. I do not have patch 121309 installed which I suspect applies to the 6/06 release. In comparison to a working system, neither workstation had the entry for "smc 898/tcp" in its /etc/services file. I added it but did not make a difference so I removed the entry.
"/etc/init.d/init.wbem stop/start" did not do the trick. Using dananderson's advice in,
http://forum.java.sun.com/thread.jspa?threadID=5057915
I ended up having to completely remove and re-add all packages that had to do with smc using the Solaris 1/06 installation CD set. I confirmed smc was working again without the error. Update Manager suggested I add patches 121308-08 and 124188-02. Hesitantly, I added those two patches, rebooted and confirmed smc produced the error message again. I removed patches 121308-08 and 124188-02 and smc started working again. I will have to refrain from applying those patches so it continues to run.
I wish I had further explanation as to why those updates are killing my smc.

Can not login into Solaris Management Console

I have a stand alone Solaris 9 system, I am able to log in as root, when I try to run Solaris Management Console 2.1 to create/delete/modify users it prompts for the root password. I enter the root password and it doesn't take and prompts again to enter the root password. Current encryption is MD5, current password is 14 characters long, changed to 8 characters still same issue. Not sure exactly where to look or what I should be looking for, other information I have gathered if it helps:
/etc/user_attr
root::::profiles=All;auths=solaris.*,solaris.grant;type=normal

Seems your root password is not working.
Boot the system with CD to single user from PROM (ok).
From OK prom issue boot cdrom -s, the system will boot to single user mode.
Mount your root device, it will be something like /dev/dsk/c0t0d0s0, mount it to some mount point like /mnt or /a. (mount /dev/dsk/c0t0d0s0 /mnt)
cd /mnt/etc
vi shadow
remove the encrypted password for user root and save the file.
cd /
umount /mnt or /a where root partition is mounted.
reboot the system and re-set your root password using passwd command.

SMC - Solaris Management Console in whole root zone

Hi,
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.
Thanks...

Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

Enhanced Storage Problem in Solaris Management Console Started in XManager

I have Sun Fire 480 with solaris 5.9 installed on it. I use XManager 1.3.9 on windows 2000 workstation to connect to it and launch Solaris Management Console (smc). After starting smc I point to Management Tools -> This Computer (sf480dbs) -> Storage -> Enhanced Storage. At that moment Log In dialog appears and I give root user name and password. After a few seconds SMC disappears (exits). If I look at CDE Error log there is the following exception
Thu Jul 31 21:00:36 2003 (/usr/dt/bin/dtexec) /usr/sbin/smc
Exception while creating engine named com.sun.java.help.search.DefaultSearchEngine for view: javax.help.SearchView@4db52b
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at javax.help.search.MergingSearchEngine.makeEngine(MergingSearchEngine.java:148)
at javax.help.search.MergingSearchEngine.merge(MergingSearchEngine.java:82)
at javax.help.JHelpSearchNavigator.merge(JHelpSearchNavigator.java:160)
at javax.help.JHelp.addHelpSet(JHelp.java:322)
at javax.help.JHelp.helpSetAdded(JHelp.java:288)
at javax.help.HelpSet.fireHelpSetAdded(HelpSet.java:344)
at javax.help.HelpSet.add(HelpSet.java:256)
at com.sun.management.viper.console.gui.help.VHelpViewer.consoleAction(VHelpViewer.java:138)
at com.sun.management.viper.console.VConsole.notifyListeners(VConsole.java:566)
at com.sun.management.viper.console.VConsole.consoleAction(VConsole.java:512)
at com.sun.management.viper.console.gui.VGUIConsole.consoleAction(VGUIConsole.java:566)
at com.sun.management.viperimpl.console.gui.SMCConsole.consoleAction(SMCConsole.java:292)
at com.sun.management.viperimpl.console.BaseConsoleManager.notifyListeners(BaseConsoleManager.java:370)
at com.sun.management.viperimpl.console.gui.GUIConsoleManager.loadOnlineHelpForTool(GUIConsoleManager.java:1198)
at com.sun.management.viperimpl.console.BaseConsoleManager.loadToolAndReplaceStub(BaseConsoleManager.java:2139)
at com.sun.management.viperimpl.console.BaseConsoleManager$ClickLoader.run(BaseConsoleManager.java:2060)
at com.sun.management.viper.util.ThreadPool$ThreadWorker.run(ThreadPool.java:138)
Caused by: java.security.InvalidParameterException
at com.sun.java.help.search.DefaultSearchEngine.<init>(DefaultSearchEngine.java:75)
... 21 more
Can anyone tell me anything what is problem?
I am newby to solaris and any ideas will be appreaciated.
Thanks in advance
David Suladze

Try search the WEB for your display adapter drivers. However, most of new especially intergated graphics are still not supported.
You may try to get it working with xsun, run kdmconfig and specify as display adapter VGA or Super VGA. I know that in some cases it helps.
As well do the same with Xorg and run /usr/X11/bin/xorgcfg, try to find somekind of generic VGA in drivers that are listed there.
As I know, smc runs only in graphical mode.
I saved the settings and pressed F2 for testing. I could see the displayDid you see buttons on that display (something like "yes", "no")?
xsun is very hard to set with most of display adapters and monitors, sometimes it shows only part of the screen, so you might not to see these buttons. However if you see them, press "yes" (or something like that, I dont exactly remember). Then reboot and your computer should start the GUI.

Solaris 9, Solaris Management Console ISSUE

Solaris 9, Solaris Management Console ISSUE
I have Solaris 9 installed and I am unable to use the Solaris Management console.
I have managed to start it:
/etc/init.d/init.wbem start
/etc/init.d/init.wbem status -> shows it's running
But if I try browser with the link http:// host:898, I have got the following error:
"A web version of the Solaris Management Console is not available at this time."
any Idea why?

Are you running Trusted Extensions? What patch cluster are you on? What toolbox are you opening?

Solaris Management Console and root pasword

I upgraded to Solaris 10 last night and tried to perform some admin work to user accounts, using Solaris Management Console. When performing the task, Solaris wants to verify user and password, the root password fails. The root pasword is correct because it let me login as root. Solaris Management Console rejects all passwords for verification. Help me please.

Thanks for your help. I updated my root password from 4 charcters to 4charcters + 4 numerals , still SMC will not let me in. I updated 2 machines and both allow me to login as root (GUI) but SMC wants to confirm the password and will not let me in.
I have reinstalled (initialized rather than upgrade) Solaris 10 on one machine (Ultra60) , that machine now works fine. It allows me to login as root(GUI) ans the SMC accepts my root password
The machines are an Ultra10 and an Ultra60.
I choose to upgrade rather than a new install because of to much info to rebuild.
Brian

Solaris Management Console reports disk errors

Hello,
Solaris Management Console is reporting my disk as having a non-Solaris partition, negative space remaining, and overlapping partitions.
All this after a trouble free install of Solaris 10 on a checked IBM and a Fujitsu hdd. (AMD +2600 chip, ASUS A7V8X mb)
Any help would be appreciated.
Thank You,
RT

As a followup - right after posting this message, I opened a support case for this, and the solution is that you need to go into /etc/security/policy.conf and backup JASS's change to the default encryption model.
Change CRYPT_DEFAULT=1 back to CRYPT_DEFAULT=__unix__
Then, you have to clear the password using "passwd -d", and then reset it again to what you want. Then, the management console will work.
I guess the management console is set to always use the __unix__ method, and not look at the policy.conf's setting. So when JASS wanders from the default, it breaks SMC.

Solaris Management Console doesn't show user's groups

Hello friends:
I am using Solaris 10 under Sparc.
i am having some problem with Solaris Managemen Console
With users -> users accounts -> edit a user
when i click on Groups TAB i can read:
The groups can not be listed. You can ....
It has been running, but sice 1 day ago it doesn't...
We don't use NIS or LDAP, only files.
/etc/nsswitch.conf is nsswitch.dns
groups command runs ok
cd /etc
ruben@laika:/etc$ ls -l nsswitch.*
-rw-r--r-- 1 root sys 1120 Apr 8 13:08 nsswitch.conf
-rw-r--r-- 1 root sys 1120 Jan 21 23:29 nsswitch.dns
-rw-r--r-- 1 root sys 757 Jan 21 23:28 nsswitch.files
-rw-r--r-- 1 root sys 1248 Jan 21 23:29 nsswitch.ldap
-rw-r--r-- 1 root sys 1228 Jan 21 23:28 nsswitch.nis
-rw-r--r-- 1 root sys 1558 Jan 21 23:29 nsswitch.nisplus
ruben@laika:/etc$ groups ruben
users
ruben@laika:/etc$
Where could be the problem?
How could i reinit solaris management console server.
Solaris has been restarted a lot of times without result :(
Thank's

i have reinstalled solaris and the problem continues.
Under Solaris Management Console groups and users doesn't run ok. Editing an user i can't see groups and editing groups i can't see its users...very very extrange.
A bug?
I don't know what is happening :(

Solaris Management Console question

Just wondering. I have tried to use the Solaris Management console several times. I have a solaris 10 box setup with a fress full install and when I launch the console the window comes up:
======================================
Configuring the management Server
Starting the server for the first time may take a few minutes.
Please allow configuration to continue until you see
"Welcome to the Solaris Management Console".
======================================
It never goes past that. I have tried it on a couple of different installs and I do not think it has ever worked for me. I must be missing something simple. Can anyone point out what I am doing wrong?

running "/etc/init.d/init.wbem start" did the trick. I had suspected that a service might need to be started.
It works well on the global zone, but I am having trouble with it on my local zone. I suspect it is something I have done with that zone because I have been testing on it. I am going to spawn a new local zone and test it on that.

Solaris Management Console Server Problems

When I try to run Solaris Management Console, I get an error saying that the server is not running on port 898. I have followed the instructions on hte FAQ. I see no instances of smcboot running in the processes. When I run /etc/init.d/init.wbem start it returns to the prompt with no additional information. When I then run /etc/init.d/init.wbem status - it says the server is not running. Anyone have any ideas ... this is driving me nuts. I have gone so far as executing smcwbemserver by hand, and it returns "smcwbemserver [7]: /lib/functions: not found"
Does ANYONE have any ideas (faint sobbing sounds in the background...)

I've got the same problem on b63 aswell if I start wbem manually I get no error (infact I don't get anything) and the server just dies. Also had the same thing on a previous Solaris 10 beta and through trial and error found it to be /etc/resolv.conf misconfigured. Unfortunately I can't quite remember what I done to fix it , if I remember I'll post back.

Solaris Management Console in whole root zones

Is it possible to run smc in whole root zone? Is there a howto for this? I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.

Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

Root password fails on auth to Solaris Management Console Server

I've setup Solaris 10 x86 on a VA linux 1220 server, all is good so far except when I try to create additional users. I am logged in as root, and the root password logs in to the CDE, but fails on authentication to Solaris Management Console Server when I try to use any of the management apps like computers and networks or Users. So I'm stalled at the point where I should be configuring the system. I have been very careful about typing in the password exactly as I use it in the login screen, but it never works in the System Management tools for This Computer. The password I'm using is 26 characters long, is it too long? Or is there a step I'm missing?
Thanks,
Brian

One of my famous guesses, but unless you changed the default password algorithm the maximum length of your password is 8 characters, when logging in on the console or desktop, anything typed after those eight characters will be ignored (unless this behaviour changed very recently).
Its possibly that SMC, and its server component WBEM does not ignore the extra characters, which could cause this behavior.
What happens if you try and login to SMC with the root user and only the first eight characters of your password?
Btw, if this was the problem i think there is a way to change the default crypto algorithm to something that supports more characters.
.7/M.

Problem with solaris management console

I have installing solaris 9 x86 12/02 on my PC. After start solaris management console 2.1 and after loged in as root, smc display this message:
System Information is not able to connect to the server because the WBEM server daemon does not appear to be running. If it is running, try stopping and restarting it. After restarting the daemon, please also exit and restart the Solaris Management Console.
SMC server is running ok.
# /etc/init.d/init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Thank you for help.
lukas

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

No Solaris Management Console was available on the specific server

Hi all,
We had just finish setting up a new Solaris 10 environment. When i launch smc on the server, on selecting toolbox there's an error message:
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running.
However, upon verifying whether smc is running:
./init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Not sure why this error message appeared, thanks.

Regarding SMC (not SunMC)..
Note: SMC = Solaris Management Console
SunMC = Sun Management Center (topic of this forum)
Patch 121308-16+ makes WBEM "secure by default."
Customers running Solaris 10 6/06 or prior must modify the client's WBEM
configuration file to allow remote connections after installing patch 121308.
1. Modify the following line in /usr/sadm/lib/smc/policy/smcserver.config:
FROM:
remote.connections=false
TO:
remote.connections=true
2. Stop and restart wbem.
# /etc/init.d/init.wbem stop
# /etc/init.d/init.wbem start
3. Verify that WBEM is now listening for connections to port 898
on all interfaces:
# netstat -an |grep 898
*.898 *.* 0 0 49152 0 LISTEN
In Solaris [TM]10 update 3 (11/06), the startup mechanism for WBEM was changed
from the legacy (rc script) method to the new Service Management Facility (SMF).
To allow remote WBEM connections on Solaris 10 update 3 or later:
# svcadm disable wbem
# svccfg -s wbem setprop options/tcp_listen=true
# svcadm enable wbem

Solaris Management Console hung up - not responding.

Similar Messages

Maybe you are looking for